RESUMEN
The broad implementation of thermoelectricity requires high-performance and low-cost materials. One possibility is employing surfactant-free solution synthesis to produce nanopowders. We propose the strategy of functionalizing "naked" particles' surface by inorganic molecules to control the nanostructure and, consequently, thermoelectric performance. In particular, we use bismuth thiolates to functionalize surfactant-free SnTe particles' surfaces. Upon thermal processing, bismuth thiolates decomposition renders SnTe-Bi2 S3 nanocomposites with synergistic functions: 1) carrier concentration optimization by Bi doping; 2) Seebeck coefficient enhancement and bipolar effect suppression by energy filtering; and 3) lattice thermal conductivity reduction by small grain domains, grain boundaries and nanostructuration. Overall, the SnTe-Bi2 S3 nanocomposites exhibit peak z T up to 1.3 at 873â K and an average z T of ≈0.6 at 300-873â K, which is among the highest reported for solution-processed SnTe.
RESUMEN
There is considerable interest in the exploration of new solar absorbers that are environmentally stable, absorb through the visible, and possess a polar crystal structure. Bournonite CuPbSbS3 is a naturally occurring sulfosalt mineral that crystallizes in the noncentrosymmetric Pmn21 space group and possesses an optimal band gap for single junction solar cells; however, the synthetic literature on this quaternary semiconductor is sparse and it has yet to be deposited and studied as a thin film. Here we describe the ability of a binary thiol-amine solvent mixture to dissolve the bulk bournonite mineral as well as inexpensive bulk CuO, PbO, and Sb2S3 precursors at room temperature and ambient pressure to generate an ink. The synthetic compound ink derived from the dissolution of the bulk binary precursors in the right stoichiometric ratios yields phase-pure thin films of CuPbSbS3 upon solution deposition and annealing. The resulting semiconductor thin films possess a direct optical band gap of 1.24 eV, an absorption coefficient â¼105 cm-1 through the visible, mobilities of 0.01-2.4 cm2 (V·s)-1, and carrier concentrations of 1018 - 1020 cm-3. These favorable optoelectronic properties suggest CuPbSbS3 thin films are excellent candidates for solar absorbers.
RESUMEN
Oxide dissolution is important for metal extraction from ores and has become an attractive route for the preparation of inks for thin film solution deposition; however, oxide dissolution is often kinetically challenging. While binary "alkahest" systems comprised of thiols and N-donor species, such as amines, are known to dissolve a wide range of oxides, the mechanism of dissolution and identity of the resulting solute(s) remain unstudied. Here, we demonstrate facile dissolution of both bulk synthetic and natural mineral ZnO samples using an "alkahest" that operates via reaction with thiophenol and 1-methylimidazole (MeIm) to give a single, pseudotetrahedral Zn(SPh)2(MeIm)2 molecular solute identified by X-ray crystallography. The kinetics of ZnO dissolution were measured using solution 1H NMR, and the reaction was found to be zero-order in the presence of excess ligands, with more electron withdrawing para-substituted thiophenols resulting in faster dissolution. A negative entropy of activation was measured by Eyring analysis, indicating associative ligand binding in, or prior to, the rate determining step. Combined experimental and computational surface binding studies on ZnO reveal stronger, irreversible thiophenol binding compared to MeIm, leading to a proposed dissolution mechanism initiated by thiol binding to the ZnO surface with the liberation of water, followed by alternating MeIm and thiolate ligand additions, and ultimately cleavage of the ligated zinc complex from the ZnO surface. Design rules garnered from the mechanistic insight provided by this study should inform the dissolution of other bulk oxides into inks for solution processed thin films.
RESUMEN
There is increasing demand for tailored molecular inks that produce phase-pure solution-processed semiconductor films. Within the Cu-Sn-S phase space, Cu2SnS3 belongs to the I2-IV-VI3 class of semiconductors that crystallizes in several different polymorphs. We report the ability of thiol-amine solvent mixtures to dissolve inexpensive bulk Cu2S and SnO precursors to generate free-flowing molecular inks. Upon mild annealing, polymorphic control over phase-pure tetragonal (I4Ì 2m) and orthorhombic (Cmc21) Cu2SnS3 films was realized simply by switching the identity of the thiol (i.e., 1,2-ethanedithiol vs 2-mercaptoethanol, respectively). Polymorph control is dictated by differences in the resulting molecular metal-thiolate complexes and their subsequent decomposition profiles, which likely seed distinct Cu2-x S phases that template the ternary sulfide sublattice. The p-type tetragonal and orthorhombic Cu2SnS3 films possess similar experimental direct optical band gaps of 0.94 and 0.88 eV, respectively, and strong photoelectrochemical current responses. Understanding how ink formulation dictates polymorph choice should inform the development of other thiol-amine inks for solution-processed films.
RESUMEN
The broad implementation of thermoelectricity requires high-performance and low-cost materials. One possibility is employing surfactant-free solution synthesis to produce nanopowders. We propose the strategy of functionalizing "naked" particles' surface by inorganic molecules to control the nanostructure and, consequently, thermoelectric performance. In particular, we use bismuth thiolates to functionalize surfactant-free SnTe particles' surfaces. Upon thermal processing, bismuth thiolates decomposition renders SnTe-Bi2S3 nanocomposites with synergistic functions: 1) carrier concentration optimization by Bi doping; 2) Seebeck coefficient enhancement and bipolar effect suppression by energy filtering; and 3) lattice thermal conductivity reduction by small grain domains, grain boundaries and nanostructuration. Overall, the SnTe-Bi2S3 nanocomposites exhibit peak z T up to 1.3 at 873â K and an average z T of ≈0.6 at 300-873â K, which is among the highest reported for solution-processed SnTe.
RESUMEN
Doped metal oxide nanocrystals that exhibit tunable localized surface plasmon resonances (LSPRs) represent an intriguing class of nanomaterials that show promise for a variety of applications from spectroscopy to sensing. LSPRs arise in these materials through the introduction of aliovalent dopants and lattice oxygen vacancies. Tuning the LSPR shape and energy is generally accomplished through controlling the concentration or identity of dopants in a nanocrystal, but the lack of finer synthetic control leaves several fundamental questions unanswered regarding the effects of radial dopant placement, size, and nanocrystalline architecture on the LSPR energy and damping. Here, we present a layer-by-layer synthetic method for core/shell nanocrystals that permits exquisite and independent control over radial dopant placement, absolute dopant concentration, and nanocrystal size. Using Sn-doped In2O3 (ITO) as a model LSPR system, we synthesized ITO/In2O3 core/shell as well as In2O3/ITO core/shell nanocrystals with varying shell thickness, and investigated the resulting optical properties. We observed profound influence of radial dopant placement on the energy and linewidth of the LSPR response, noting (among other findings) that core-localized dopants produce the highest values for LSPR energies per dopant concentration, and display the lowest damping in comparison to nanocrystals with shell-localized or homogeneously distributed dopants. Inactive Sn dopants present on ITO nanocrystal surfaces are activated upon the addition of a subnanometer thick undoped In2O3 shell. We show how LSPR energy can be tuned fully independent of dopant concentration, relying solely on core/shell architecture. Finally, the impacts of radial dopant placement on damping, independent of LSPR energy, are explored.