Optically transparent vertical silicon nanowire arrays for live-cell imaging.

Programmable nano-bio interfaces driven by tuneable vertically configured nanostructures have recently emerged as a powerful tool for cellular manipulations and interrogations. Such interfaces have strong potential for ground-breaking advances, particularly in cellular nanobiotechnology and mechanobiology. However, the opaque nature of many nanostructured surfaces makes non-destructive, live-cell characterization of cellular behavior on vertically aligned nanostructures challenging to observe. Here, a new nanofabrication route is proposed that enables harvesting of vertically aligned silicon (Si) nanowires and their subsequent transfer onto an optically transparent substrate, with high efficiency and without artefacts. We demonstrate the potential of this route for efficient live-cell phase contrast imaging and subsequent characterization of cells growing on vertically aligned Si nanowires. This approach provides the first opportunity to understand dynamic cellular responses to a cell-nanowire interface, and thus has the potential to inform the design of future nanoscale cellular manipulation technologies.

Light-Controlled Selective Collection-and-Release of Biomolecules by an On-Chip Nanostructured Device.

The analysis of biosamples, e.g., blood, is a ubiquitous task of proteomics, genomics, and biosensing fields; yet, it still faces multiple challenges, one of the greatest being the selective separation and detection of target proteins from these complex biosamples. Here, we demonstrate the development of an on-chip light-triggered reusable nanostructured selective and quantitative protein separation and preconcentration platform for the direct analysis of complex biosamples. The on-chip selective separation of required protein analytes from raw biosamples is performed using antibody-photoacid-modified Si nanopillars vertical arrays (SiNPs) of ultralarge binding surface area and enormously high binding affinity, followed by the light-controlled rapid release of the tightly bound target proteins in a controlled liquid media. Two important experimental observations are presented: (1) the first demonstration on the control of biological reaction binding affinity by the nanostructuring of the capturing surface, leading to highly efficient protein collection capabilities, and (2) the light-triggered switching of the highly sticky binding surfaces into highly reflective nonbinding surfaces, leading to the rapid and quantitative release of the originally tightly bound protein species. Both of these two novel behaviors were theoretically and experimentally investigated. Importantly, this is the first demonstration of a three-dimensional (3D) SiNPs on-chip filter with ultralarge binding surface area and reversible light-controlled quantitative release of adsorbed biomolecules for direct purification of blood samples, able to selectively collect and separate specific low abundant proteins, while easily removing unwanted blood components (proteins, cells) and achieving desalting results, without the requirement of time-consuming centrifugation steps, the use of desalting membranes, or affinity columns.

Controlled Formation of Radial Core-Shell Si/Metal Silicide Crystalline Heterostructures.

The highly controlled formation of "radial" silicon/NiSi  core-shell nanowire heterostructures has been demonstrated for the first time. Here, we investigated the "radial" diffusion of nickel atoms into crystalline nanoscale silicon pillar 11 cores, followed by nickel silicide phase formation and the creation of a well-defined shell structure. The described approach is based on a two-step thermal process, which involves metal diffusion at low temperatures in the range of 200-400 °C, followed by a thermal curing step at a higher temperature of 400 °C. In-depth crystallographic analysis was performed by nanosectioning the resulting silicide-shelled silicon nanopillar heterostructures, giving us the ability to study in detail the newly formed silicide shells. Remarkably, it was observed that the resulting silicide shell thickness has a self-limiting behavior, and can be tightly controlled by the modulation of the initial diffusion-step temperature. In addition, electrical measurements of the core-shell structures revealed that the resulting shells can serve as an embedded conductive layer in future optoelectronic applications. This research provides a broad insight into the Ni silicide "radial" diffusion process at the nanoscale regime, and offers a simple approach to form thickness-controlled metal silicide shells in the range of 5-100 nm around semiconductor nanowire core structures, regardless the diameter of the nanowire cores. These high quality Si/NiSi core-shell nanowire structures will be applied in the near future as building blocks for the creation of utrathin highly conductive optically transparent top electrodes, over vertical nanopillars-based solar cell devices, which may subsequently lead to significant performance improvements of these devices in terms of charge collection and reduced recombination.

Nanodicing Single Crystalline Silicon Nanowire Arrays.

Here, we demonstrate a novel method for the production of single-crystal Si nanowire arrays based on the top-down carving of Si-nanowall structures from a donor substrate, and their subsequent controlled and selective harvesting into a sacrificial solid material block. Nanosectioning of the nanostructures-embedding block by ultramicrotome leads to the formation of size, shape, and orientation-controlled high quality nanowire arrays. Additionally, we introduce a novel approach that enables transferring the nanowire arrays to any acceptor substrate, while preserving their orientation, and placing them on defined locations. Furthermore, crystallographic analysis and electrical measurements were performed, proving that the quality of the sectioned nanowires, which derive from their original crystalline donor substrate, are remarkably preserved.

Cavity-Assisted Manipulation of Freely Rotating Silicon Nanorods in High Vacuum.

Optical control of nanoscale objects has recently developed into a thriving field of research with far-reaching promises for precision measurements, fundamental quantum physics and studies on single-particle thermodynamics. Here, we demonstrate the optical manipulation of silicon nanorods in high vacuum. Initially, we sculpture these particles into a silicon substrate with a tailored geometry to facilitate their launch into high vacuum by laser-induced mechanical cleavage. We manipulate and trace their center-of-mass and rotational motion through the interaction with an intense intracavity field. Our experiments show that the anisotropy of the nanorotors leads to optical forces that are three times stronger than on silicon nanospheres of the same mass. The optical torque experienced by the spinning rods will enable cooling of the rotational motion and torsional optomechanics in a dissipation-free environment.

Optically driven ultra-stable nanomechanical rotor.

Nanomechanical devices have attracted the interest of a growing interdisciplinary research community, since they can be used as highly sensitive transducers for various physical quantities. Exquisite control over these systems facilitates experiments on the foundations of physics. Here, we demonstrate that an optically trapped silicon nanorod, set into rotation at MHz frequencies, can be locked to an external clock, transducing the properties of the time standard to the rod's motion with a remarkable frequency stability f r/Δf r of 7.7 × 1011. While the dynamics of this periodically driven rotor generally can be chaotic, we derive and verify that stable limit cycles exist over a surprisingly wide parameter range. This robustness should enable, in principle, measurements of external torques with sensitivities better than 0.25 zNm, even at room temperature. We show that in a dilute gas, real-time phase measurements on the locked nanorod transduce pressure values with a sensitivity of 0.3%.