Platinum-Iron(II) Oxide Sites Directly Responsible for Preferential Carbon Monoxide Oxidation at Ambient Temperature: An Operando X-ray Absorption Spectroscopy Study.

Operando X-ray absorption spectroscopy identified that the concentration of Fe2+ species in the working state-of-the-art Pt-FeOx catalysts quantitatively correlates to their preferential carbon monoxide oxidation steady-state reaction rate at ambient temperature. Deactivation of such catalysts with time on stream originates from irreversible oxidation of active Fe2+ sites. The active Fe2+ species are presumably Fe+2 O-2 clusters in contact with platinum nanoparticles; they coexist with spectator trivalent oxidic iron (Fe3+ ) and metallic iron (Fe0 ) partially alloyed with platinum. The concentration of active sites and, therefore, the catalyst activity strongly depends on the pretreatment conditions. Fe2+ is the resting state of the active sites in the preferential carbon monoxide oxidation cycle.

Stabilization of Lead-Reduced Metal Halide Perovskite Nanocrystals by High-Entropy Alloying.

Colloidal metal halide perovskite (MHP) nanocrystals (NCs) are an emerging class of fluorescent quantum dots (QDs) for next-generation optoelectronics. A great hurdle hindering practical applications, however, is their high lead content, where most attempts addressing the challenge in the literature compromised the material's optical performance or colloidal stability. Here, we present a postsynthetic approach that stabilizes the lead-reduced MHP NCs through high-entropy alloying. Upon doping the NCs with multiple elements in considerably high concentrations, the resulting high-entropy perovskite (HEP) NCs remain to possess excellent colloidal stability and narrowband emission, with even higher photoluminescence (PL) quantum yields, ηPL, and shorter fluorescence lifetimes, τPL. The formation of multiple phases containing mixed interstitial and doping phases is suggested by X-ray crystallography. Importantly, the crystalline phases with higher degrees of lattice expansion and lattice contraction can be stabilized upon high-entropy alloying. We show that the lead content can be approximately reduced by up to 55% upon high-entropy alloying. The findings reported here make one big step closer to the commercialization of perovskite NCs.

Controlled Formation of Dimers and Spatially Isolated Atoms in Bimetallic Au-Ru Catalysts via Carbon-Host Functionalization.

The introduction of a foreign metal atom in the coordination environment of single-atom catalysts constitutes an exciting frontier of active-site engineering, generating bimetallic low-nuclearity catalysts often exhibiting unique catalytic synergies. To date, the exploration of their full scope is thwarted by (i) the lack of synthetic techniques with control over intermetallic coordination, and (ii) the challenging characterization of these materials. Herein, carbon-host functionalization is presented as a strategy to selectively generate Au-Ru dimers and isolated sites by simple incipient wetness impregnation, as corroborated by careful X-ray absorption spectroscopy analysis. The distinct catalytic fingerprints are unveiled via the hydrogen evolution reaction, employed as a probe for proton adsorption properties. Intriguingly, the virtually inactive Au atoms enhance the reaction kinetics of their Ru counterparts already when spatially isolated, by shifting the proton adsorption free energy closer to neutrality. Remarkably, the effect is magnified by a factor of 2 in dimers. These results exemplify the relevance of controlling intermetallic coordination for the rational design of bimetallic low-nuclearity catalysts.

Ceria-Supported Gold Nanoparticles as a Superior Catalyst for Nitrous Oxide Production via Ammonia Oxidation.

The production of nitrous oxide, N2 O, via NH3 oxidation is not on a practical scale due to the lack of a suitable catalyst. Instead, it is produced via thermal decomposition of NH4 NO3 , rendering N2 O too costly and limiting its prospective uses. Herein, we report CeO2 -supported Au nanoparticles (2-3 nm) as a highly selective catalyst for low-temperature NH3 oxidation to N2 O, exhibiting two orders of magnitude higher space-time yield than the state-of-the-art Mn-Bi/α-Al2 O3 and remarkable stability over 70 h on stream. The reaction proceeds via a Mars-van Krevelen mechanism, with the density of interfacial Auδ+ species and the oxygen storage capacity of CeO2 identified as the key performance descriptors. The latter could be enhanced by cobalt doping, improving the catalytic activity and setting a new benchmark for N2 O productivity. These findings establish NH3 oxidation as an efficient process for N2 O manufacture and facilitate its broader utilization in selective oxidations.

Operando Laboratory-Based Multi-Edge X-Ray Absorption Near-Edge Spectroscopy of Solid Catalysts.

Laboratory-based X-ray absorption spectroscopy (XAS) and especially X-ray absorption near-edge structure (XANES) offers new opportunities in catalyst characterization and presents not only an alternative, but also a complementary approach to precious beamtime at synchrotron facilities. We successfully designed a laboratory-based setup for performing operando, quasi-simultaneous XANES analysis at multiple K-edges, more specifically, operando XANES of mono-, bi-, and trimetallic CO2 hydrogenation catalysts containing Ni, Fe, and Cu. Detailed operando XANES studies of the multielement solid catalysts revealed metal-dependent differences in the reducibility and re-oxidation behavior and their influence on the catalytic performance in CO2 hydrogenation. The applicability of operando laboratory-based XANES at multiple K-edges paves the way for advanced multielement catalyst characterization complementing detailed studies at synchrotron facilities.

Sustainable Synthesis of Bimetallic Single Atom Gold-Based Catalysts with Enhanced Durability in Acetylene Hydrochlorination.

Gold single-atom catalysts (SACs) exhibit outstanding reactivity in acetylene hydrochlorination to vinyl chloride, but their practical applicability is compromised by current synthesis protocols, using aqua regia as chlorine-based dispersing agent, and their high susceptibility to sintering on non-functionalized carbon supports at >500 K and/or under reaction conditions. Herein, a sustainable synthesis route to carbon-supported gold nanostructures in bimetallic catalysts is developed by employing salts as alternative chlorine source, allowing for tailored gold dispersion, ultimately reaching atomic level when using H2 PtCl6 . To rationalize these observations, several synthesis parameters (i.e., pH, Cl-content) as well as the choice of metal chlorides are evaluated, hinting at the key role of platinum in promoting a chlorine-mediated dispersion mechanism. This can be further extrapolated to redisperse large gold agglomerates (>70 nm) on carbon carriers into isolated atoms, which has important implications for catalyst regeneration. Another key role of platinum single atoms is to inhibit the sintering of their spatially isolated gold-based analogs up to 800 K and during acetylene hydrochlorination, without compromising the intrinsic activity of Au(I)-Cl active sites. Accordingly, exploiting cooperativity effects of a second metal is a promising strategy towards practical applicability of gold SACs, opening up exciting opportunities for multifunctional single-atom catalysis.

57Fe-Enrichment effect on the composition and performance of Fe-based O2-reduction electrocatalysts.

Pt-group metal (PGM)-free catalysts of the Me-N-C type based on abundant and inexpensive elements have gained importance in the field of oxygen reduction reaction (ORR) electrocatalysis due to their promising ORR-activities. Their insufficient stability, however, has fueled the interest in obtaining an in-depth understanding of their composition, which requires highly sensitive techniques compatible with their low metal contents (typically <5 wt%). In the particular context of iron-based materials, 57Fe-Mössbauer spectroscopy is often used to provide such compositional information, but requires (partially) 57Fe-enriched precursors. As a consequence, the extrapolation of conclusions drawn from Mössbauer measurements on 57Fe-enriched catalysts to equivalent materials with the standard isotope distribution relies on the assumption that the metal precursor's isotopic profile does not affect the catalysts' composition and ORR-activity. To verify this hypothesis, in this study we prepared two series of Fe-based catalysts using distinctively different synthesis approaches and various relative contents of 57Fe-enriched precursors, and observed that the extent of the latter parameter significantly affected the catalysts' ORR-activity. This effect was successfully correlated with the Fe-speciation of the catalysts inferred from the characterization of these samples with Mössbauer and X-ray absorption spectroscopies. Ultimately, these results highlight the crucial importance of verifying the consistency of the catalysts' activity and composition upon comparing standard and 57Fe-enriched samples.

Mechanistic Study of Carbon Dioxide Hydrogenation over Pd/ZnO-Based Catalysts: The Role of Palladium-Zinc Alloy in Selective Methanol Synthesis.

Pd/ZnO catalysts show good activity and high selectivity to methanol during catalytic CO2 hydrogenation. The Pd-Zn alloy phase has usually been considered as the active phase, though mechanistic studies under operando conditions have not been conducted to verify this. Here, we report a mechanistic study under realistic conditions of methanol synthesis, using in situ and operando X-ray absorption spectroscopy, X-ray powder diffraction, and time-resolved isotope labeling experiments coupled with FTIR spectroscopy and mass spectrometry. Pd-Zn alloy-based catalysts, prepared through reduction of a heterobimetallic PdII ZnII acetate bridge complex, and which do not contain zinc oxide or any PdZn/ZnO interface, produce mostly CO. The Pd-Zn phase is associated with the formation of CO, and does not provide the active sites required to produce methanol from the direct hydrogenation of carbon dioxide. The presence of a ZnO phase, in contact with a Pd-Zn phase, is essential for efficient methanol production.

Defining aluminum-zoning during synthesis of ZSM-5 zeolites.

ZSM-5 zeolites attract considerable attention owing to their wide range of applications in catalysis and separation. The crystals that are synthesized with tetrapropylammonium ions (TPA+) as the template show aluminum-zoning, i.e. aluminum being concentrated in the rim part of the crystal. Here, we study the aluminum distribution within individual crystals as a function of synthesis time and find that the degree of aluminum-zoning evolves. Crystals with inhomogeneous aluminum distribution persist since their emergence from the early stages of hydrothermal treatment. The degree of aluminum-zoning in the crystals increases with the synthesis time, accompanied by an increase in the crystal size and subsequently the formation of a well-defined crystal morphology. This indicates a gradual aluminum migration toward the crystal surface during the course of crystallization. Moreover, the addition of high-aluminum-containing species to the existing crystals preferentially takes place at the late stages of synthesis, which contributes to the inhomogeneous aluminum distribution within a crystal. As a result, the finally formed crystals have not only the largest crystal size but also the highest degree of aluminum-zoning. The insight into the origin of aluminum-zoning that our work provides advances our understanding of the relationship between aluminum distribution in zeolites and the synthesis time to design better catalysts.

Adaptive Chemoenzymatic Microreactors Composed of Inorganic Nanoparticles and Bioinspired Intrinsically Disordered Proteins.

The assembly of protein and inorganic nanoparticles represents an attractive approach to generate composite materials with multiple functions. Herein, we functionalize inorganic nanoparticles with intrinsically disordered protein domains associated with the formation of membraneless compartments in cells. These protein sequences, defined as low complexity domains (LCDs), encode intermolecular interactions that drive highly controlled, dynamic self-assembly in response to environmental changes. We show that the properties of the LCDs can be transferred to inorganic nanoparticles, inducing controlled phase separation that is dynamic and responsive to ionic strength and pH. Specifically, we hybridize magnetic nanoparticles with multi-domain proteins consisting of LCD domains and a globular enzyme, generating dynamic protein-composite compartments that locally confine hybrid chemoenzymatic reactions and respond to external magnetic fields and changes in solution conditions.

Carrier-Induced Modification of Palladium Nanoparticles on Porous Boron Nitride for Alkyne Semi-Hydrogenation.

Chemical modifiers enhance the efficiency of metal catalysts in numerous applications, but their introduction often involves toxic or expensive precursors and complicates the synthesis. Here, we show that a porous boron nitride carrier can directly modify supported palladium nanoparticles, originating unparalleled performance in the continuous semi-hydrogenation of alkynes. Analysis of the impact of various structural parameters reveals that using a defective high surface area boron nitride and ensuring a palladium particle size of 4-5 nm is critical for maximizing the specific rate. The combined experimental and theoretical analyses point towards boron incorporation from defects in the support to the palladium subsurface, creating the desired isolated ensembles determining the selectivity. This practical approach highlights the unexplored potential of using tailored carriers for catalyst design.

Hierarchical Structure of NiMo Hydrodesulfurization Catalysts Determined by Ptychographic X-Ray Computed Tomography.

Hydrodesulphurization, the removal of sulphur from crude oils, is an essential catalytic process in the petroleum industry safeguarding the production of clean hydrocarbons. Sulphur removal is critical for the functionality of downstream processes and vital to the elimination of environmental pollutants. The effectiveness of such an endeavour is among other factors determined by the structural arrangement of the heterogeneous catalyst. Namely, the accessibility of the catalytically active molybdenum disulphide (MoS2 ) slabs located on the surfaces of a porous alumina carrier. Here, we examined a series of pristine sulfided Mo and NiMo hydrodesulphurization catalysts of increasing metal loading prepared on commercial alumina carriers using ptychographic X-ray computed nanotomography. Structural analysis revealed a build consisting of two interwoven support matrix elements differing in nanoporosity. With increasing metal loading, approaching that of industrial catalysts, these matrix elements exhibit a progressively dissimilar MoS2 surface coverage as well as MoS2 cluster formation at the matrix element boundaries. This is suggestive of metal deposition limitations and/ or catalyst activation and following prohibitive of optimal catalytic utilization. These results will allow for diffusivity calculations, a better rationale of current generation catalyst performance as well as a better distribution of the active phase in next-generation hydrodesulphurization catalysts.

Stable Ultraconcentrated and Ultradilute Colloids of CsPbX3 (X = Cl, Br) Nanocrystals Using Natural Lecithin as a Capping Ligand.

Attaining thermodynamic stability of colloids in a broad range of concentrations has long been a major thrust in the field of colloidal ligand-capped semiconductor nanocrystals (NCs). This challenge is particularly pressing for the novel NCs of cesium lead halide perovskites (CsPbX3; X = Cl, Br) owing to their highly dynamic and labile surfaces. Herein, we demonstrate that soy lecithin, a mass-produced natural phospholipid, serves as a tightly binding surface-capping ligand suited for a high-reaction yield synthesis of CsPbX3 NCs (6-10 nm) and allowing for long-term retention of the colloidal and structural integrity of CsPbX3 NCs in a broad range of concentrations-from a few ng/mL to >400 mg/mL (inorganic core mass). The high colloidal stability achieved with this long-chain zwitterionic ligand can be rationalized with the Alexander-De Gennes model that considers the increased particle-particle repulsion due to branched chains and ligand polydispersity. The versatility and immense practical utility of such colloids is showcased by the single NC spectroscopy on ultradilute samples and, conversely, by obtaining micrometer-thick, optically homogeneous dense NC films in a single spin-coating step from ultraconcentrated colloids.

Variation of Aluminium Distribution in Small-Sized ZSM-5 Crystals during Desilication.

Hollow ZSM-5 zeolites of size below one micrometer can be produced by desilication of crystals with aluminium zoning. The parent crystals have a core-shell structure: the core part has nearly no aluminium, whereas the aluminium content in the shell increases when extending to exterior surface. Transmission electron microscopy confirmed the preservation of the crystalline shell after base leaching, but could not identify its subtle change. An increase of the Si/Al ratio of the surface was detected upon leaching the parent material to form the hollow zeolite by using ambient pressure X-ray photoelectron spectroscopy and infrared spectroscopy of substituted alkylpyridines. 27 Al MAS NMR showed that base leaching results in a reduced percentage of distorted tetrahedrally coordinated aluminium. The reprecipitation of dissolved species occurs and tetrahedrally coordinated tin atoms can thus be introduced to the shell framework. Overall, the formation of hollow ZSM-5 zeolites by desilication involves not only the removal of silicon-rich core, but also a reduced percentage of exterior aluminium-related acid sites, which should be considered while using hollow zeolites in acid-catalyzed reactions.

The Link between ZSM-5 Zeolite Crystallization and Mesopore Formation by Leaching.

Acid or base leaching are well-established tools in the synthesis of mesoporous zeolites. Previous studies suggest an inherent link between the structure-property relationship of mesoporous zeolites, that is, chemical resistance, pore diameter and distribution, with zeolite synthesis or crystallization conditions. The exact nature and/or origin of this link is currently however, poorly established. Here, we provide evidence how zeolite crystallization conditions influence the leaching behavior and thus structure of mesoporous zeolites. Electron microscopy and in situ small angle X-ray scattering both confirmed the crystallization of ZSM-5 to utilize both nanoparticles and oligomers as elemental building blocks. Utilization of these species is highly depended on supersaturation. The precursor solution of decreased water content favored a faster consumption of nanoparticles compared to its oligomers at the early stage of crystallization. Then the addition of oligomers can heal the surface imperfections and thus the resulting zeolite showed a higher resistance against acid leaching. In contrast, within the precursor solution of increased water content the slower consumption of nanoparticles led to crystals with a less robust rim. Defects existed in the rim due to limited healing by oligomers and, as such, mesopores can be created by the following post-treatment. Precise control over selected crystallization conditions can therefore further aid the design of optimized mesoporous zeolites.

Preserved in a Shell: High-Performance Graphene-Confined Ruthenium Nanoparticles in Acetylene Hydrochlorination.

The potential implementation of ruthenium-based catalysts in polyvinyl chloride production via acetylene hydrochlorination is hindered by their inferior activity and stability compared to gold-based systems, despite their 4-fold lower price. Combining in-depth characterization and kinetic analysis we reveal the superior activity of ruthenium nanoparticles with an optimal size of 1.5 nm hosted on nitrogen-doped carbon (NC) and identify their deactivation modes: 1) nanoparticle redispersion into inactive single atoms and 2) coke formation at the metal sites. Tuning the density of the NC carrier enables a catalytic encapsulation of the ruthenium nanoparticles into single layer graphene shells at 1073 K that prevent the undesired metal redispersion. Finally, we show that feeding O2 during acetylene hydrochlorination limits coke formation over the nanodesigned ruthenium catalyst, while the graphene layer is preserved, resulting in a stability increase of 20 times, thus rivalling the performance of gold-based systems.

Bismesitoylphosphinic Acid (BAPO-OH): A Ligand for Copper Complexes and Four-Electron Photoreductant for the Preparation of Copper Nanomaterials.

Bismesitoylphosphinic acid, (HO)PO(COMes)2 (BAPO-OH), is an efficient photoinitiator for free-radical polymerizations of olefins in aqueous phase. Described here are the structures of various copper(II) and copper(I) complexes with BAPO-OH as the ligand. The complex CuII (BAPO-O)2 (H2 O)2 is photoactive, and under irradiation with UV light in aqueous phase, it serves as a source of metallic copper in high purity and yield (>80 %). Simultaneously, the radical polymerization of acrylates can be initiated and allows the preparation of nanoparticle/polymer nanocomposites in which the metallic Cu nanoparticles are protected against oxidation. The determination of the stoichiometry of the photoreductions suggests an almost quantitative conversion from CuII into Cu0 with half an equivalent of BAPO-OH, which serves as a four-electron photoreductant.

Molecularly Tailored Nickel Precursor and Support Yield a Stable Methane Dry Reforming Catalyst with Superior Metal Utilization.

Syngas production via the dry reforming of methane (DRM) is a highly endothermic process conducted under harsh conditions; hence, the main difficulty resides in generating stable catalysts. This can, in principle, be achieved by reducing coke formation, sintering, and loss of metal through diffusion in the support. [{Ni(µ2-OCHO)(OCHO)(tmeda)}2(µ2-OH2)] (tmeda = tetramethylethylenediamine), readily synthesized and soluble in a broad range of solvents, was developed as a molecular precursor to form 2 nm Ni(0) nanoparticles on alumina, the commonly used support in DRM. While such small nanoparticles prevent coke deposition and increase the initial activity, operando X-ray Absorption Near-Edge Structure (XANES) spectroscopy confirms that deactivation largely occurs through the migration of Ni into the support. However, we show that Ni loss into the support can be mitigated through the Mg-doping of alumina, thereby increasing significantly the stability for DRM. The superior performance of our catalytic system is a direct consequence of the molecular design of the metal precursor and the support, resulting in a maximization of the amount of accessible metallic nickel in the form of small nanoparticles while preventing coke deposition.

Crystal symmetry breaking and vacancies in colloidal lead chalcogenide quantum dots.

Size and shape tunability and low-cost solution processability make colloidal lead chalcogenide quantum dots (QDs) an emerging class of building blocks for innovative photovoltaic, thermoelectric and optoelectronic devices. Lead chalcogenide QDs are known to crystallize in the rock-salt structure, although with very different atomic order and stoichiometry in the core and surface regions; however, there exists no convincing prior identification of how extreme downsizing and surface-induced ligand effects influence structural distortion. Using forefront X-ray scattering techniques and density functional theory calculations, here we have identified that, at sizes below 8 nm, PbS and PbSe QDs undergo a lattice distortion with displacement of the Pb sublattice, driven by ligand-induced tensile strain. The resulting permanent electric dipoles may have implications on the oriented attachment of these QDs. Evidence is found for a Pb-deficient core and, in the as-synthesized QDs, for a rhombic dodecahedral shape with nonpolar {110} facets. On varying the nature of the surface ligands, differences in lattice strains are found.

Chemical Composition, but Not Specific Surface Area, Affects Calcium Retention of Nanostructured Calcium Compounds in Growing Rats.

Background: Low dietary calcium intake and bioavailability may adversely affect bone health. Reducing the size of calcium compounds increases their specific surface area (SSA, expressed as m2/g) and may increase calcium dissolution and bioavailability.Objective: We investigated the influence of SSA and chemical composition on the bioavailability of calcium and compared in vitro calcium dissolution with in vivo absorption.Methods: Calcium dissolution was measured in 0.1 M phosphoric acid, whereas color and pH changes of foods were assessed as indicators for potential sensory performance. Calcium absorption, retention, and fractional retention were measured over a 5-d balance study in growing Sprague-Dawley male rats after 21 d of feeding. Femoral and vertebral bone mineral density (BMD) and extensive tissue histology were assessed at study end. The influence of SSA on calcium bioavailability was assessed by comparing the groups fed pure calcium carbonate (CaCO3) with increasing SSAs of 3, 36, and 64 m2/g (CaCO3_3, CaCO3_36 and CaCO3_64), whereas chemical composition was assessed by comparing the smallest CaCO3_64, a 50:50 wt:wt percent solution mixture of CaCO3 and hydroxyapatite_94, and pure hydroxyapatite_100.Results: In vivo, fractional calcium retention from hydroxyapatite_100 (mean ± SEM: 54.86% ± 0.95%/5 d) was significantly greater than from CaCO3_64 (49.66% ± 1.15%/5 d) (P = 0.044). Increasing SSA of the pure CaCO3 did not significantly improve calcium retention. Across all 5 groups, there were no significant differences in BMD or tissue calcification by histology. In vitro calcium dissolution did not correlate with SSA or calcium absorption. In selected food matrixes, hydroxyapatite_100 caused less color change and/or smaller pH increase than did the other calcium compounds.Conclusions: Our findings suggest that chemical composition rather than SSA is a predictor of nanostructured calcium bioavailability and that in vitro dissolution of nanostructured calcium does not predict in vivo absorption. Although its phosphorus content may limit use in some populations, nanostructured hydroxyapatite may be a promising calcium compound for food fortification.