10-million-elements-per-second printing of infrared-resonant plasmonic arrays by multiplexed laser pulses.

We report on high-quality infrared (IR)-resonant plasmonic nanoantenna arrays fabricated on a thin gold film by tightly focused femtosecond (fs) laser pulses coming at submegahertz repetition rates at a printing rate of 10 million elements per second. To achieve this, the laser pulses were spatially multiplexed by fused silica diffractive optical elements into 51 identical submicrometer-sized laser spots arranged into a linear array at periodicity down to 1 µm. The demonstrated high-throughput nanopatterning modality indicates fs laser maskless microablation as an emerging robust, flexible, and competitive lithographic tool for advanced fabrication of IR-range plasmonic sensors for environmental sensing, chemosensing, and biosensing.

The icephobic performance of alkyl-grafted aluminum surfaces.

This work analyzes the anti-icing performance of flat aluminum surfaces coated with widely used alkyl-group based layers of octadecyltrimethoxysilane, fluorinated alkylsilane and stearic acid as they are subjected to repeated icing/deicing cycles. The wetting properties of the samples upon long-term immersion in water are also evaluated. The results demonstrate that smooth aluminum surfaces grafted with alkyl groups are prone to gradual degradation of their hydrophobic and icephobic properties, which is caused by interactions and reactions with both ice and liquid water. This implies that alkyl-group based monolayers on aluminum surfaces are not likely to be durable icephobic coatings unless their durability in contact with ice and/or water is significantly improved.

Superhydrophobic surfaces: are they really ice-repellent?

This work investigates the anti-ice performance of various superhydrophobic surfaces under different conditions. The adhesion strength of glaze ice (similar to that deposited during "freezing rain") is used as a measure of ice-releasing properties. The results show that the ice-repellent properties of the materials deteriorate during icing/deicing cycles, as surface asperities appear to be gradually damaged. It is also shown that the anti-icing efficiency of superhydrophobic surfaces is significantly lower in a humid atmosphere, as water condensation both on top of and between surface asperities takes place, leading to significantly larger values of ice adhesion strength. This work thus shows that superhydrophobic surfaces are not always ice-repellent and their use as anti-ice materials may therefore be limited.

Morphology control of nanostructures via surface reaction of metal nanodroplets.

We report on the controllable synthesis of diverse nanostructures using laser ablation of a metal target in a liquid medium. The nanodroplets generated by laser ablation react with the liquid and produce various nanostructures, such as hollow nanoparticles, core-shell nanoparticles, heterostructures, nanocubes, and ordered arrays. A millisecond laser with low power density is essential for obtaining such metal nanodroplets, while the target material, the reactivity of liquid medium, and the laser frequency are decisive for controlling the morphology and size of the nanostructures produced. This green and powerful technique can be extended to different material systems for obtaining various nanostructures.

Hollow nanoparticles of metal oxides and sulfides: fast preparation via laser ablation in liquid.

In this work, diverse hollow nanoparticles of metal oxides and sulfides were prepared by simply laser ablating metal targets in properly chosen liquids. The Kirkendall voiding and the selective heating with an infrared laser were shown to work as two independent mechanisms for the formation of such hollow nanoparticles in only one- or two-step synthesis approaches. One of the prepared materials, ZnS hollow nanoparticles, showed high performance in gas sensing. The simple, fast, inexpensive technique that is proposed demonstrates very promising perspectives.

Photoinduced structural conversions of transition metal chalcogenide materials.

The conversions of NiAs-type structures of transition metal chalcogenides (FeS and CoSe) to pyrite-type structures of dichalcogenides (FeS(2) and CoSe(2), respectively) under irradiation by HeNe laser (wavelength, 632.8 nm; intensity, 6 x 10(4) W/cm(2)) have been investigated using Raman spectroscopy. The laser-induced conversions give rise to Raman peaks corresponding to vibrations of S-S or Se-Se bonds of respective pyrite structures. The results are of interest for the characterization and fabrication of pyrite-like structures necessary for applications as oxygen reduction reaction catalysts. Material modifications at the micrometer and submicrometer levels are attainable. The structural conversions are accompanied by self-polymerization of excess chalcogen. Extended laser irradiation (>500 s) in air induces the substitution of chalcogen (S or Se) by oxygen in the chalcogenide materials and the subsequent formation of transition metal (Fe or Co) oxides. Excess chalcogen appears to prevent further oxidation. The article also presents conditions necessary to avoid laser-induced structural changes and oxidation of metal chalcogenide materials during Raman measurements.

Plasmonic Nanolenses Produced by Cylindrical Vector Beam Printing for Sensing Applications.

Interaction of complex-shaped light fields with specially designed plasmonic nanostructures gives rise to various intriguing optical phenomena like nanofocusing of surface waves, enhanced nonlinear optical response and appearance of specific low-loss modes, which can not be excited with ordinary Gaussian-shaped beams. Related complex-shaped nanostructures are commonly fabricated using rather expensive and time-consuming electron- and ion-beam lithography techniques limiting real-life applicability of such an approach. In this respect, plasmonic nanostructures designed to benefit from their excitation with complex-shaped light fields, as well as high-performing techniques allowing inexpensive and flexible fabrication of such structures, are of great demand for various applications. Here, we demonstrate a simple direct maskless laser-based approach for fabrication of back-reflector-coupled plasmonic nanorings arrays. The approach is based on delicate ablation of an upper metal film of a metal-insulator-metal (MIM) sandwich with donut-shaped laser pulses followed by argon ion-beam polishing. After being excited with a radially polarized beam, the MIM configuration of the nanorings permitted to realize efficient nanofocusing of constructively interfering plasmonic waves excited in the gap area between the nanoring and back-reflector mirror. For optimized MIM geometry excited by radially polarized CVB, substantial enhancement of the electromagnetic near-fields at the center of the ring within a single focal spot with the size of 0.37λ2 can be achieved, which is confirmed by Finite Difference Time Domain calculations, as well as by detection of 100-fold enhanced photoluminescent signal from adsorbed organic dye molecules. Simple large-scale and cost-efficient fabrication procedure offering also a freedom in the choice of materials to design MIM structures, along with remarkable optical and plasmonic characteristics of the produced structures make them promising for realization of various nanophotonic and biosensing platforms that utilize cylindrical vector beam as a pump source.

How wetting hysteresis influences ice adhesion strength on superhydrophobic surfaces.

In this work, we measured the adhesion strength of artificially created glaze ice (similar to accreted in nature) on rough fluoropolymer-based hydrophobic surfaces with different contact angle (CA) and wetting hysteresis. The previously reported direct correlation between ice repellency and CA on superhydrophobic surfaces is shown to be only valid for surfaces with low wetting hysteresis. Another correlation was found between wetting hysteresis and ice adhesion strength on rough surfaces with similar chemistry.