RESUMEN
Single-phase MxCs (M = Fe, Co, and Ni) were prepared by solvothermal conversion of Prussian blue single source precursors. The single source precursor is prepared in water, and the conversion process is carried out in alkylamines at reaction temperatures above 200 °C. The reaction is scalable using a commercial source of Fe-PB. High-resolution transmission electron microscopy, X-ray photoelectron microscopy, and powder X-ray diffraction confirm that carbides have thin oxide termination but lack graphitic surfaces. Electrocatalytic activity reveals that Fe3C and Co2C are oxygen evolution reaction electrocatalysts, while Ni3C is a bifunctional [OER and hydrogen evolution reaction (HER)] electrocatalyst.
RESUMEN
Perovskites have gained popularity both as the active material in photovoltaics and as bulk triplet sensitizers for solid-state triplet-triplet annihilation upconversion (TTA-UC). Prior to widespread implementation into commercial photovoltaics, an in-depth understanding of the environmental influences on device performance is required. To this point, the temperature-dependent structure-function properties of TTA-UC within methylammonium formamidinium lead triiodide (MAFA)/rubrene UC devices are explored. A strong temperature dependence of the underlying UC dynamics is observed, where the maximum UC efficiency is achieved at 170 K, reflecting the competition between triplet diffusion length, diffusion rate, and triplet-triplet encounter events. A combination of spectroscopic and structural methods and theoretical modelling illustrates that despite the significantly increased carrier lifetime of the perovskite at low temperatures, the TTA-UC dynamics are not governed by the underlying sensitizer properties but rather limited by the underlying triplet diffusion.
RESUMEN
The impact of a magneto-structural phase transition on the carrier effective mass in Cu5FeS4 plasmonic semiconductor nanocrystals was examined using Magnetic Circular Dichroism (MCD). Through MCD, the sample was confirmed as p-type from variable temperature studies from 1.8 - 75 K. Magnetic field dependent behavior is observed, showing an asymptotic behavior at high field with an m∗ value 5.98 m∗∕me at 10 T and 2.73 m∗∕me at 2 T. Experimentally obtained results are holistically compared to SQUID magnetization data and DFT results, highlighting a dependency on vacancy driven polaronic coupling, magnetocrystalline anisotropy, and plasmon coupling of the magnetic field all contributing to an overall decrease in the hole mean free path dependent on the magnetic field applied to Cu5FeS4.
RESUMEN
Energy-efficient capture and release of small gas molecules, particularly carbon dioxide (CO2) and methane (CH4), are of significant interest in academia and industry. Porous materials such as metal-organic frameworks (MOFs) have been extensively studied, as their ultrahigh porosities and tunability enable significant amounts of gas to be adsorbed while also allowing specific applications to be targeted. However, because of the microporous nature of MOFs, the gas adsorption performance is dominated by high uptake capacity at low pressures, limiting their application. Hence, methods involving stimuli-responsive materials, particularly light-induced switchable adsorption (LISA), offer a unique alternative to thermal methods. Here, we report the mechanism of a well-known LISA system, the azobenzene-based material PCN-250, for CO2 and CH4 adsorption. There is a noticeable difference in the LISA effect dependent on the metal cluster involved, with the most significant being PCN-250-Al, where the adsorption can change by 83.1% CH4 and 56.1% CO2 at 298 K and 1 bar and inducing volumetric storage changes of 36.2 and 33.9 cm3/cm3 at 298 K between 5 and 85 bar (CH4) and 2 and 9 bar (CO2), respectively. Using UV light in both single-crystal X-ray diffraction and gas adsorption testing, we show that upon photoirradiation, the framework undergoes a "localized heating" phenomenon comparable to an increase of 130 K for PCN-250-Fe and improves the working capacity. This process functions because of the constrained nature of the ligand, preventing the typical trans-to-cis isomerization observed in free azobenzene. In addition, we observed that the degree of localized heating is highly dependent on the metal cluster involved, with the series of isostructural PCN-250 systems showing variable performance based upon the degree of interaction between the ligand and the metal center.
RESUMEN
Plasmonic semiconductor nanocrystals (NCs) are a new and exciting class of materials that enable higher control of their localized surface plasmon resonance (LSPR) than metallic counterparts. Additionally, earth-abundant and non-toxic materials such as copper iron sulfides are gaining interest as alternatives to heavy metal-based semiconductor materials. Colloidal bornite (Cu5FeS4) is an interesting but underexplored example of a heavy metal-free plasmonic semiconductor. This report details the hot-injection synthesis of bornite yielding NCs ranging from 2.7 to 6.1 nm in diameter with stoichiometric control of the copper and iron content. The absorbance spectra of bornite NCs with different Cu:Fe ratios change at different rates as the particles oxidize and develop LSPR in the near-infrared region. X-ray photoelectron spectroscopy results indicate that oxidation produces sulfates rather than metal oxides as well as a decrease in the iron content within the NCs. Additionally, increasing iron content leads to decreases in carrier density and effective mass of the carrier, as determined by the Drude model. This controlled synthesis, combined with a further understanding of the relationship between the particle structure and optical properties, will enable the continued development and application of these fascinating heavy metal-free plasmonic semiconductor nanoparticles.
RESUMEN
The effect of metal-cluster redox identity on the thermal decarboxylation of a series of isostructural metal-organic frameworks (MOFs) with tetracarboxylate-based ligands and trinuclear µ3-oxo clusters was investigated. The PCN-250 series of MOFs can consist of various metal combinations (Fe3, Fe/Ni, Fe/Mn, Fe/Co, Fe/Zn, Al3, In3, and Sc3). The Fe-based system can undergo a thermally induced reductive decarboxylation, producing a mixed valence cluster with decarboxylated ligand fragments subsequently eliminated to form uniform mesopores. We have extended the analysis to alternative monometallic and bimetallic PCN-250 systems to observe the cluster's effect on the decarboxylation process. Our results suggest that the propensity to undergo decarboxylation is directly related to the cluster redox accessibility, with poorly reducible metals, such as Al, In, and Sc, unable to thermally reduce at the readily accessible temperatures of the Fe-containing system. In contrast, the mixed-metal variants are all reducible. We report improvements in gas adsorption behavior, significantly the uniform increase in the heat of adsorption going from the microporous to hierarchically induced decarboxylated samples. This, along with Fe oxidation state changes from 57Fe Mössbauer spectroscopy, suggests that reduction occurs at the clusters and is essential for mesopore formation. These results provide insight into the thermal behavior of redox-active MOFs and suggest a potential future avenue for generating mesoporosity using controlled cluster redox chemistry.
RESUMEN
Investigations into a thermally generated decarboxylation mechanism for metal site activation and the generation of mesopores in a carboxylate iron-based MOF, PCN-250, have been conducted. PCN-250 exhibits an interesting oxidation state change during thermal treatment under inert atmospheres or vacuum conditions, transitioning from an Fe(iii)3 cluster to a Fe(ii)Fe(iii)2 cluster. To probe this redox event and discern a mechanism of activation, a combination of thermogravimetric analysis, gas sorption, scanning electron microscopy, 57Fe Mössbauer spectroscopy, gas chromatography-mass spectrometry, and X-ray diffraction studies were conducted. The results suggest that the iron-site activation occurs due to ligand decarboxylation above 200 °C. This is also consistent with the generation of a missing cluster mesoporous defect in the framework. The resulting mesoporous PCN-250 maintains high thermal stability, preserving crystallinity after multiple consecutive high-temperature regeneration cycles. Additionally, the thermally reduced PCN-250 shows improvements in the total uptake capacity of methane and CO2.