Aggregation structure of chiral cubic liquid crystals revealed by X-ray diffraction utilizing a new algorithm.

Chiral aggregation structure spontaneously formed by achiral rodlike molecules, a long-time unsolved problem in liquid crystal science, has been clarified by applying a new crystallographic algorithm recently developed while utilizing aggregation characteristics of this type. Bicontinuously interwoven networks characterize it similarly to the neighboring Gyroid phase in a phase diagram against the alkyl chain length and temperature. However, the network connectivity is significantly different from the bicontinuous networks that have been either known for related compounds or assumed for this phase. The network is compatible with the homochiral arrangement of rodlike molecules with successive twists by a proper angle between adjacent junctions.

Design, Regioselective Synthesis, and Photophysical Properties of Perfluoronaphthalene-Based Donor-Acceptor-Donor Fluorescent Dyes.

A one-step route to a series of perfluoronaphthalene-based donor (D)-acceptor (A)-D fluorescent dyes with various electron-donating groups was developed. The perfluoronaphthalene moiety in the D-A-D dyes served as a good electron-accepting aromatic ring with excellent intramolecular charge transfer properties, as determined by density functional theory calculations and measurements of the fluorescence properties in solution, in poly(methyl methacrylate) (PMMA) films, and in crystal form. Notably, replacing the naphthalene ring with perfluoronaphthalene in the D-A-D dyes carrying the phenothiazine moiety not only stabilized the highest occupied molecular orbital and lowest unoccupied molecular orbital energy levels but also reduced the energy band gap to change the emission color from blue to yellow. Among the four synthesized perfluoronaphthalene D-A-D dyes, those bearing diphenylamino groups afforded the best fluorescence quantum yields in Et2O solution (0.60) and in PMMA film (0.65) because the propeller structure of the diphenylamino group that acts as a donor substituent effectively suppresses radiation-free deactivation. In contrast, in the crystalline state, the carbazoyl-bearing D-A-D dye provided the best fluorescence quantum yield (0.35) because the radiation-free inactivation was suppressed by π-πF stacking at the donor site, which was confirmed by single-crystal X-ray analysis.

Effect of alkali metal cations on network rearrangement in polyisoprene ionomers.

The effects of cations, Li+, Na+, and Cs+, on the structure of ionic aggregates and network rearrangement in carboxylated polyisoprene (PI) ionomers were studied. We found that network rearrangement via interaggregate hopping of metal carboxylates is improved with a decrease in cation size, even though density functional theory (DFT) calculation indicated the increase in the attractive interaction between metal carboxylates. At the same time, we also found that as the size of the cation decreases, the inclusion of the PI segment in the ionic aggregate increases. The DFT calculation suggested the cation-π interaction between the cation and double bonds in the PI segment as the cause for the inclusion. The inclusion of the PI segment with a low glass transition temperature (Tg) plasticizes the ionic aggregate and would sterically hinder the attractive interaction between metal carboxylates. In fact, the electron spin resonance measurement revealed a decrease in the Tg of the ionic aggregate with a decrease in cation size. Based on our findings, we proposed that the inclusion of PI segments in the ionic aggregate is the possible cause for the enhancement of network rearrangement in the carboxylated PI ionomers with a decrease in the cation size.

Stabilization of Bicontinuous Cubic Phase and Its Two-Sided Nature Produced by Use of Siloxane Tails and Introduction of Molecular Nonsymmetry.

A recent intriguing finding that a helical network arrangement forms the bicontinuous cubic phase is attracting great attention for the possibility of new routes to asymmetric synthesis by achiral molecules. However, the design of the molecular structure for the cubic phase is still unrevealed. In this work, a nonsymmetric core molecule with larger naphthalene and smaller benzene moieties at each side of the central linkage and the same disiloxanyldecyloxy terminal at both terminals is shown to be the first example of molecule forming both single-layered and double-layered core assembly modes in the Ia3d phase as a single molecule system. The molecule forms the former mode at high temperatures as a thermodynamically stable phase, similarly to the symmetric naphthalene core system, whereas, on cooling below a temperature (∼350 K), a metastable Ia3d phase forms a double-layered core state down to room temperature, which is common to the benzene core system. As another effect of the nonsymmetric core, the cubic phase is maintained at room temperature for more than 100 days with slight distortion. Infrared spectral studies and quantum chemical calculations suggested the easy transformation between the two core assembly modes. The core nonsymmetry can be a versatile fine-tuning of the core assembly mode and phase stability for the cubic phase molecules.

Toward strong self-healing polyisoprene elastomers with dynamic ionic crosslinks.

To compromise high mechanical strength and efficient self-healing capability in an elastomer with dynamic crosslinks, optimization of the molecular structure is crucial in addition to the tuning of the dynamic properties of the crosslinks. Herein, we studied the effects of molecular weight, content of carboxy groups, and neutralization level of ionically crosslinked polyisoprene (PI) elastomers on their morphology, network rearrangement behavior, and self-healing and mechanical properties. In this PI elastomer, nanosized sphere-shaped ionic aggregates are formed by both neutralized and non-neutralized carboxy groups that act as stickers. The number density of the ionic aggregates that act as physical crosslinks increased with increase in the stickers' concentration, although the size of the ionic aggregates was independent of the molecular weight and the stickers' concentration. The ionic network was dynamically rearranged by the stickers' hopping between the ionic aggregates, and the rearrangement was accelerated by decreasing the neutralization level. We found that the 2Rg of the PI must be significantly larger than the average distance between the ionic aggregates to obtain a mechanically strong PI elastomer. We also found that further increase in the molecular weight is effective to enhance the dimensional stability of the elastomer. However, this approach reduced the elastomer's self-healing rate at the same time because the diffusion and randomization of the polymer chains between the damaged faces were reduced. In this work, we clearly demonstrated the principle in the optimization of the molecular structure for the ionically crosslinked PI elastomers to tune the mechanical and autonomous self-healing properties.

Molecular design of anti-spindle-like molecules by use of siloxanyl terminals for a thermotropic bicontinuous cubic phase.

Selecting 1,2-bis(aryloyl)hydrazine as a model molecular framework, this article examines how the combined modification of two molecular moieties, i.e., variation of the molecular core motif (benzene B or naphthalene N as two aromatic rings) and use of bulky and flexible siloxane segments (disiloxane Si2, trisiloxane Si3, or its branched type iSi3) at the end of both chains, affects the phase behavior including the cubic (Cub) phases such as well-known achiral Ia3d or the so-called "Im3m" phase mostly recognized as a chiral one. It was found that the use of a naphthalene core as a larger core effectively provides the compound with improved thermal stability, and the clearing temperature in the N series is ca. 50 K higher than that of the B series. On the other hand, the introduction of siloxane segments at their terminals is effective for lowering the LC-phase temperature range by several tens of K. Focusing on the Cub phases, only the introduction of the disiloxane Si2 segment was useful for their formation, and we envisioned how much degree the anti-spindle shape of the average molecular shape is in the Ia3d phase. The use of the trisiloxane Si3/iSi3 segment primarily led to the formation of columnar (Col) phases. Consideration of the chemical composition revealed that the delicate balance between the three molecular moieties, siloxane terminal, alkyl spacer, and aromatic core part, is critical for the Cub phase formation, and it can be summarized as the threshold weight fraction of the alkyl spacer in the three moieties being 0.284 or larger, which derives an anti-spindle shape favorable for the formation of the Ia3d-Cub phase.

Aromatic Fluorine-Induced One-Pot Synthesis of Ring-Perfluorinated Trimethine Cyanine Dye and Its Remarkable Fluorescence Properties.

We have developed a novel aromatic fluorine-induced one-pot synthesis of ring-perfluorinated trimethine cyanine dye without the use of a pyridine by reacting hexafluorobenzoindolenine with 5 equiv of methyl trifluoromethanesulfonate in mixed solvents of dimethylformamide and toluene. The thus-obtained ring-perfluorinated trimethine cyanine dye shows much better fluorescence properties, including intensity, quantum yield, and lifetime, than the nonfluorinated dye, not only in CH2Cl2 solution and the poly(methyl methacrylate) film but also in the powder state. Furthermore, ring-perfluorinated trimethine cyanine dye 2a shows better photostability toward white light-emitting diode irradiation than nonfluorinated dye trimethine cyanine dye 2b.

Molecular packing in two bicontinuous Ia3[combining macron]d gyroid phases of calamitic cubic mesogens BABH(n): roles in structural stability and reentrant behavior.

1,2-Bis(4'-n-alkoxybenzoyl)hydrazine [BABH(n), n is the number of carbon atoms in the alkyl chain] exhibits two different Ia3[combining macron]d cubic phases depending on the chain length (5 ≤n≤ 13 and 15 ≤n≤ 22). The molecular packing modes, not only of molecular cores but also of alkyl chains, are investigated through a maximum entropy method (MEM) and an analysis of the chain-length dependence of the body diagonal of the unit cell. The analyses revealed the difference in molecular packing. The short-chain Ia3[combining macron]d structure of BABH(n) (5 ≤n≤ 13) is constructed by single-layered core motifs and bilayers of alkyl chains, in which the orientation is tilted from the normal to the layer. The long-chain Ia3[combining macron]d structure (15 ≤n≤ 22) is formed by double-layered core motifs and monolayers of alkyl chains, in which the orientation is normal to the layer. Based on the molecular packing modes, the reentrant behavior between the two Ia3[combining macron]d phases was clarified. It was revealed that the alkyl chains of BABH(n) molecules play an essential role in the formation and stability of the two Ia3[combining macron]d structures.

Systematic exploitation of thermotropic bicontinuous cubic phase families from 1,2-bis(aryloyl)hydrazine-based molecules.

Rational design of molecules that exhibit a thermotropic bicontinuous cubic (Cub) phase has been earnestly desired. In this work, we describe the suitable selection of a molecular motif that has enabled the systematic exploitation of eight new series of Cub-phase molecules with symmetric molecular cores, N-n (1), PB-n (2), S-n (3), and PEB-n (4), and unsymmetric cores, B-N-n (5), B-PB-n (6), B-S-n (7), and B-PEB-n (8). These eight series all originate from achiral chain-core-chain type rod-like molecules that exhibit two types of Cub phases, an achiral Ia3d phase, and a chiral phase. All the Ia3d phases formed were found to be isomorphous structures, with their cell dimensions being proportional to the core size, and the same was true for the latter chiral phase. We demonstrated that the formation is mainly governed by the segregation between core and alkyl moieties of the molecules, and thus, by the weight fraction of the core portion fcore. This work also demonstrates that the central dicarbonylhydrazine linkage bearing intermolecular hydrogen bonding ability exhibits a pinning effect that prevents slippage of π-stacks of molecules, which is critical for the formation of the two Cub phases that are composed of chiral networks with twisted molecular arrangements. In each series, the emergence of spontaneous chirality formation that occurred in the chiral phase was limited to between 0.36 and 0.50 in the range of fcore. An interesting insight was that the introduced unsymmetry of the molecular core strongly influenced the phase behavior, which lowered the temperature range of Cub phases to around that of the smallest core series B-n, while the high temperature limit (Tc) was roughly proportional to the core size, as determined by the strength of intermolecular π-π interactions.

A structural model of the chiral "Im3m" cubic phase.

Assuming the twisted arrangement of rodlike molecules as the origin of the chirality as in the existing model, a new model of the molecular arrangement in the cubic "Im3m" phase is proposed. The adoption of a basic structure different from that assumed in the existing model resolves most difficulties of the model including the random placement of defects concerning the sense of twist.

Stabilization of the bicontinuous cubic phase in siloxane-terminated mesogens, 1,2-bis[4'-(n-(oligodimethylsiloxyl)alkoxy)benzoyl]hydrazine.

The introduction of oligodimethyl siloxane segments at the termini of the alkyl tails has been employed to stabilize the bicontinuous cubic (Cub(bi)) phase of a chain-core-chain type molecule having a 1,2-bis(benzoyl)hydrazine central core with two chains attached at the 4' position of each benzoyl moiety. In this study, three silylated molecules, bis-C10Si2, bis-C10Si3, and C10Si2-C8C=C, were synthesized, where "CnSim" represents the number of carbon and silicon atoms in the chain and "bis" indicates the two chains being the same, whereas the last one is asymmetric with respect to the core. The phase behaviors were examined by using polarized optical microscopy, differential scanning calorimetry, and X-ray diffraction techniques. All three compounds form Cub(bi) phases and their syntheses were compared including their parent compound bis-C18. It was clearly revealed that the introduction of oligodimethyl siloxane segments effectively suppresses the crystallization at low temperatures, and as a result stabilizes the Cub(bi) phases, in an extreme case down to room temperature. The semi-quantitative analyses in terms of lattice constant and three-dimensional electron density map help us to better understand the self-assembly process in the Cub(bi) phases. The study also revealed that the introduction of oligodimethyl siloxane segments is not only an alternative for the hydrocarbon segment but also is able to provide a versatile design strategy for obtaining stable Cub(bi) phases.

Mirror symmetry breaking by mixing of equimolar amounts of two gyroid phase-forming achiral molecules.

Mirror symmetry breaking was observed by mixing of equimolar amounts of two gyroid phase-forming achiral molecules, one having a short and the other with a long tail. This fact indicates the importance of a critical chain length for the appearance of the chiral bicontinuous cubic (Cubbi) phase. It also demonstrates that the molecular-level mobility is closely connected to the formation and stabilisation of those Cubbi phases.

5-N-Arylaminothiazoles as Highly Twisted Fluorescent Monocyclic Heterocycles: Synthesis and Characterization.

A series of 5-N-arylaminothiazoles was prepared by reacting thioamide dianions derived from secondary thioamides with thioformamides, followed by sequential oxidation with iodine. X-ray analyses demonstrated that they adopt structures that are highly twisted from planar conformations. Their orientations were tuned by the steric and/or electronic interactions of the substituents at their 2-, 4-, and 5-positions. The 5-aminothiazoles exhibited a range of fluorescent emissions, from blue to orange. Although the absorption spectra were independent of the polarity of the solvent, fluorescent emissions were influenced by the polarity of the solvent: in more polar solvents, the emissions were red-shifted. These phenomena were examined in terms of Lippert-Mataga plots and the change in the dipole moment between the ground and excited states. They also exhibited emissions in the solid state, again from blue to orange. Cyclic voltammetry of the 5-aminothiazoles showed reversible waves of one-electron oxidation. The half-potential of the oxidation was reduced by the introduction of electron-donating groups to the phenyl groups on the nitrogen atom at the 5-position. DFT calculations were carried out to determine the energy levels of the HOMO and LUMO. Finally, the results of TG-DTA showed that they are thermally stable.

The pressure effect on thermotropic cubic phases of 1,2-bis(4'-n-alkoxybenzoyl)hydrazines.

The effect of pressure on the nanostructure of a thermotropic cubic (Cub) mesogen 1,2-bis(4'-n-alkoxybenzoyl)hydrazine (BABH-n; n is the number of carbon atoms in the alkyl chain) was investigated under elevated pressures up to 140 MPa by an X-ray diffraction (XRD) technique. Four compounds, BABH-12, -14, -16 and -18, were examined and the type of Cub mesophase formed at ambient pressure is Ia3d for BABH-12 and -18, Im3m for BABH-14, and both for BABH-16. The high-pressure XRD enabled the discrimination of the Cub phase type in the low-pressure Cub phase regions of BABH-14 and BABH-16 and the revision of the phase diagrams reported previously. New insight in this work is changes in the lattice constant a of the Cub phases upon pressurization. The lattice constant a of the Im3m-Cub phase in BABH-14 decreases as only an exception, while those of the Ia3d-Cub phases in BABH-16 and -18 increased gradually, with increasing pressure, up to about 24 and 25% in the unit cell volume, respectively, in their optimal situations of pressure and temperature. The a values of the Ia3d-Cub phases in BABH-12, -14, -16 and -18 at elevated pressures were roughly on an extrapolated line of the a vs. n linear relationship determined for the corresponding data of the short-chain BABH-n (6 ≤ n ≤ 13) at ambient pressure. The pressure-induced expansion of the Ia3d-Cub lattice is well explained by reduced lateral expansion of a terminal alkyl chain and apparent reduction of the effective core size (from "double-layered core" to the "single-layered core" states).

Magnetic Supramolecular Spherical Arrays: Direct Formation of Micellar Cubic Mesophase by Lanthanide Metallomesogens with 7-Coordination Geometry.

Here, an unprecedented phenomenon in which 7-coordinate lanthanide metallomesogens, which align via hydrogen bonds mediated by coordinated H2O molecules, form micellar cubic mesophases at room temperature, creating body-centered cubic (BCC)-type supramolecular spherical arrays, is reported. The results of experiments and molecular dynamics simulations reveal that spherical assemblies of three complexes surrounded by an amorphous alkyl domain spontaneously align in an energetically stable orientation to form the BCC structure. This phenomenon differs greatly from the conventional self-assembling behavior of 6-coordinated metallomesogens, which form columnar assemblies due to strong intermolecular interactions. Since the magnetic and luminescent properties of different lanthanides vary, adding arbitrary functions to spherical arrays is possible by selecting suitable lanthanides to be used. The method developed in this study using 7-coordinate lanthanide metallomesogens as building blocks is expected to lead to the rational development of micellar cubic mesophases.

CO2 switchable adhesion of ionic polydimethylsiloxane elastomers.

We have developed ionic polydimethylsiloxane elastomers that rapidly and reversibly increase their adhesion upon exposure to carbon dioxide (CO2) gas. The CO2 molecules dissolve quickly into the ionic aggregates, physically crosslinking the polymer chains and plasticizing them. The elastomer consequently becomes softer and more adhesive upon exposure to CO2.

A Rapid and Dual Optical CO2 -responsive Polydimethylsiloxane Elastomer with a Fluorinated Cyanine Dye.

We found that our optically CO2 -responsive polydimethylsiloxane (PDMS) elastomer rapidly and reversibly underwent both visible and fluorescent color changes in the presence of CO2 gas. Unlike conventional optically CO2 -responsive polymeric materials, it functions in totally dry gaseous conditions. The visible color and fluorescence of the elastomer sheet change after only 1 min of exposure to CO2 , and the sheet exhibits excellent repeatability in terms of color switching that persists for at least 20 times.

Light-driven phase transition in a cubic-phase-forming binary system composed of 4'-n-docosyloxy-3'-nitrobiphenyl-4-carboxylic acid and an azobenzene derivative.

Binary mixtures were prepared from an azobenzene derivative and a liquid-crystal (LC) compound that exhibits smectic C (SmC) and bicontinuous cubic (Cub(bi)) LC phases. Reversible switching between the two phases in response to UV-light irradiation was observed. This light-driven SmC-to-Cub(bi) transition is the first example showing the increased dimensionality of molecular ordering with isomerization of azobenzenes (see figure).

Repulsive segregation of fluoroalkyl side chains turns a cohesive polymer into a mechanically tough, ultrafast self-healable, nonsticky elastomer.

Dynamic crosslinking of flexible polymer chains via attractive and reversible interactions is widely employed to obtain autonomously self-healable elastomers. However, this design leads to a trade-off relationship between the strength and self-healing speed of the material, i.e., strong crosslinks provide a mechanically strong elastomer with slow self-healing property. To address this issue, we report an "inversion" concept, in which attractive poly(ethyl acrylate-random-methyl acrylate) chains are dynamically crosslinked via repulsively segregated fluoroalkyl side chains attached along the main chain. The resulting elastomer self-heals rapidly (> 90% within 15 min) via weak but abundant van der Waals interactions among matrix polymers, while the dynamic crosslinking provides high fracture stress (≈2 MPa) and good toughness (≈17 MJ m-3). The elastomer has a nonsticky surface and selectively self-heals only at the damaged faces due to the surface segregation of the fluoroalkyl chains. Moreover, our elastomer strongly adheres to polytetrafluoroethylene plates (≈60 N cm-2) via hot pressing.

Temperature-jump time-resolved X-ray diffraction study of cubic-cubic phase-transition kinetics in thermotropic cubic mesogen 1,2-bis(4'-n-alkoxybenzoyl)hydrazines (BABH-n).

The transformation between two thermotropic bicontinuous cubic (Cub) phases has kinetically been determined by time-resolved X-ray diffraction. The system investigated was 1,2-bis(4'-n-alkoxybenzoyl)hydrazines (denoted as BABH-n, where n is the number of carbon atoms in the alkyl chain). Transitions from the Ia3d to Im3m phases of BABH-13 and from the Im3m to Ia3d phases of BABH-16 were induced by a temperature jump. Although the two Cub phases have quite different aggregation structures, the transitions between them appeared to occur without any diffractive intermediate states. A clear increase in the rate of transformation was observed upon increasing the extent of superheating, and the rate was slower than that reported previously for lyotropic systems. In addition, a comparison between the two transformations revealed that the rate of the Im3m to Ia3d transformation (of BABH-16) is ca. 5 times faster than that of Ia3d to Im3m (of BABH-13).