Self-assembled stretchable photonic crystal for a tunable color filter.

In this Letter, we report the development of a continuously tunable color filter based on a self-assembled isotropically stretchable microbead monolayer. Spreading equidistantly upon the application of lateral strain, the isotropically stretchable monolayer serves as a dynamic diffraction grating whose diffraction angle can be mechanically modulated. Combined with a simple spatial filtering scheme, the spectra of the filtered light are solely controlled by external strain (up to 32% radial strain) to cover a broad visible spectrum. Through a finite-difference time-domain far-field diffraction simulation, we validate the working principle of the proposed color filter. The proposed continuously tunable color filter is expected to open original applications in next-generation display field.

High Efficiency, Transparent, Reusable, and Active PM2.5 Filters by Hierarchical Ag Nanowire Percolation Network.

Air quality has become a major public health issue in Asia including China, Korea, and India. Particulate matters are the major concern in air quality. We present the first environmental application demonstration of Ag nanowire percolation network for a novel, electrical type transparent, reusable, and active PM2.5 air filter although the Ag nanowire percolation network has been studied as a very promising transparent conductor in optoelectronics. Compared with previous particulate matter air filter study using relatively weaker short-range intermolecular force in polar polymeric nanofiber, Ag nanowire percolation network filters use stronger long-range electrostatic force to capture PM2.5, and they are highly efficient (>99.99%), transparent, working on an active mode, low power consumption, antibacterial, and reusable after simple washing. The proposed new particulate matter filter can be applied for a highly efficient, reusable, active and energy efficient filter for wearable electronics application.

Highly Controlled Nanoporous Ag Electrode by Vaporization Control of 2-Ethoxyethanol for a Flexible Supercapacitor Application.

Controlling the surface morphology of the electrode on the nanoscale has been studied extensively because the surface morphology of a material directly leads to the functionalization in various fields of studies. In this study, we designed a simple and cost-effective method to fine-tune the surface morphology and create controlled nanopores on the silver electrode by utilizing 2-ethoxyethanol and two successive heat treatments. High electrical conductivity and mechanical robustness of nanoporous silver corroborate its prospect to be employed in various applications requiring a certain degree of flexibility. As a proof-of-concept, a high-performance supercapacitor was fabricated by electrodepositing MnO2. This method is expected to be useful in various electronic applications as well as energy storage devices.

Single nanowire resistive nano-heater for highly localized thermo-chemical reactions: localized hierarchical heterojunction nanowire growth.

A single nanowire resistive nano-heater (RNH) is fabricated, and it is demonstrated that the RNH can induce highly localized temperature fields, which can trigger highly localized thermo-chemical reactions to grow hierarchical nanowires directly at the desired specific spot such as ZnO nanowire branch growth on a single Ag nanowire.

Reconfigurable Multilevel Optical PUF by Spatiotemporally Programmed Crystallization of Supersaturated Solution.

Physical unclonable functions (PUFs) are emerging as an alternative to information security by providing an advanced level of cryptographic keys with non-replicable characteristics, yet the cryptographic keys of conventional PUFs are not reconfigurable from the ones assigned at the manufacturing stage and the overall authentication process slows down as the number of entities in the dataset or the length of cryptographic key increases. Herein, a supersaturated solution-based PUF (S-PUF) is presented that utilizes stochastic crystallization of a supersaturated sodium acetate solution to allow a time-efficient, hierarchical authentication process together with on-demand rewritability of cryptographic keys. By controlling the orientation and the average grain size of the sodium acetate crystals via a spatiotemporally programmed temperature profile, the S-PUF now includes two global parameters, that is, angle of rotation and divergence of the diffracted beam, in addition to the speckle pattern to produce multilevel cryptographic keys, and these parameters function as prefixes for the classification of each entity for a fast authentication process. At the same time, the reversible phase change of sodium acetate enables repeated reconfiguration of the cryptographic key, which is expected to offer new possibilities for a next-generation, recyclable anti-counterfeiting platform.

Plastic Shavings by Laser: Peeling Porous Graphene Springs for Multifunctional All-Carbon Applications.

Manufacturing strategies to create three-dimensional (3D) structures with multifunctional nanomaterials are of intense interest for fabricating building blocks in many electromechanical applications. A coil spring composed of graphene provides an important step toward the realization of all-carbon devices, as it is one of the essential elements for a wide range of systems. In this connection, here an unprecedented fabrication strategy to create a new type of 3D coil spring composed of laser-induced graphene springs (LIG-S) which is spontaneously produced via the pyrolytic jetting technique, is presented. Similar to wood or metal shavings observed in traditional machining processes, a pair of LIG-S with two opposite chiralities and controllable macroscopic dimensions is produced by a single scanning of a focused continuous-wave (CW) laser on a polyimide (PI) substrate. The resulting LIG-S, plastic shavings by laser, exhibits sufficient mechanical and electrical properties to enable many applications including strain-tolerant spring electrodes, antennas, supercapacitors, gas sensors, and luminescent filaments under extreme conditions. Without using any conventional fabrication techniques or other labor-intensive, time-consuming, and expensive processes, this novel approach enables a high-throughput mass production of macro-, micro-, and nanoscale featured LIG-S that can be manufactured within seconds to realize many open opportunities in all-carbon electromechanical systems.

Controlled thicknesses of vaporized self-assembled multilayers on copper nanopowders under ultra-high vacuum (UHV).

Copper nanoparticles were coated with 1-octanethiol self-assembled monolayers (SAMs) using the dry-coating method for oxidation prevention. In this study, thicknesses of 1-octanethiol SAMs were successfully controlled, and the stability of SAMs as a passivation layer on copper nanoparticles was examined. Thicknesses of 1-octanethiol SAMs varied with vacuum levels and coating cycles. Under low-vacuum conditions, the thickness was 10 nm, regardless of the coating conditions. In contrast, various thicknesses resulted under ultra-high vacuum (UHV) and ranged from 4 nm to 10 nm. SAMs that were nearly a monolayer thick (4 nm) resulted from two coating cycles of 1.5 min, and the oxidation inhibition period was 15 days. Thus, the dry-coating method successfully controlled the thicknesses of SAMs with satisfactory oxidation inhibition properties under ultra-high vacuum.

Study of sintering behavior of vapor forms of 1-octanethiol coated copper nanoparticles for application to ink-jet printing technology.

Sub-50 nm copper nanoparticles coated with sub-5 nm 1-octanethiol layer for oxidation inhibition were examined to confirm the 1-octanethiol removal temperature as the sub-50 nm copper nanoparticles are sintered. As a result, 1-octanethiol Self-Assembled Multi-layers (SAMs) on sub-50 nm copper nanoparticles were successfully removed before sintering of copper nanoparticles so that a high density of copper line could be obtained. Finally, the line resistivity was measured and compared to verify the effect of sintering in different atmospheres. As a result, electrical resistivity of the copper pattern sintered in hydrogen atmosphere was measured at 6.96 x 10(-6) ohm-cm whereas that of the copper pattern sintered in mixed gas atmosphere was measured at 2.62 x 10(-5) ohm-cm. Thus, sintering of copper patterns was successfully done to show low electrical resistivity values. Moreover, removal of 1-octanethiol coating after sintering process was confirmed using X-ray photoelectron spectroscopy (XPS) analysis. By showing no sulfur content, XPS results indicate that 1-octanethiol is completely removed. Therefore, the vapor form of 1-octanethiol coating layers can be safely used as an oxidation inhibition layer for low temperature sintering processes and ink-jet applications.

Facile Fabrication of ZnO-ZnFe2O4 Hollow Nanostructure by a One-Needle Syringe Electrospinning Method for a High-Selective H2S Gas Sensor.

Herein, a facile fabrication process of ZnO-ZnFe2O4 hollow nanofibers through one-needle syringe electrospinning and the following calcination process is presented. The various compositions of the ZnO-ZnFe2O4 nanofibers are simply created by controlling the metal precursor ratios of Zn and Fe. Moreover, the different diffusion rates of the metal oxides and metal precursors generate a hollow nanostructure during calcination. The hollow structure of the ZnO-ZnFe2O4 enables an enlarged surface area and increased gas sensing sites. In addition, the interface of ZnO and ZnFe2O4 forms a p-n junction to improve gas response and to lower operation temperature. The optimized ZnO-ZnFe2O4 has shown good H2S gas sensing properties of 84.5 (S = Ra/Rg) at 10 ppm at 250 °C with excellent selectivity. This study shows the good potential of p-n junction ZnO-ZnFe2O4 on H2S detection and affords a promising sensor design for a high-performance gas sensor.

Transmission electron microscopy analysis of octanethiol-coated Cu powders.

In this study, microstructures of Cu powders coated with octanethiol were analyzed using (scanning) transmission electron microscopy. Moreover, aging process of the octanethiol-coated layer as time passes by was analyzed using the electron energy loss spectroscopy technique. The octanethiol layer coated on the surface of Cu powders was kept until it was exposed to air for around 30 days. As days passes by, the coating layer had been decomposed and then a Cu(2)O layer was formed on the surface of powders.

Reversible, Selective, Ultrawide-Range Variable Stiffness Control by Spatial Micro-Water Molecule Manipulation.

Evolution has decided to gift an articular structure to vertebrates, but not to invertebrates, owing to their distinct survival strategies. An articular structure permits kinematic motion in creatures. However, it is inappropriate for creatures whose survival strategy depends on the high deformability of their body. Accordingly, a material in which the presence of the articular structure can be altered, allowing the use of two contradictory strategies, will be advantageous in diverse dynamic applications. Herein, spatial micro-water molecule manipulation, termed engineering on variable occupation of water (EVO), that is used to realize a material with dual mechanical modes that exhibit extreme differences in stiffness is introduced. A transparent and homogeneous soft material (110 kPa) reversibly converts to an opaque material embodying a mechanical gradient (ranging from 1 GPa to 1 MPa) by on-demand switching. Intensive theoretical analysis of EVO yields the design of spatial transformation scheme. The EVO gel accomplishes kinematic motion planning and shows great promise for multimodal kinematics. This approach paves the way for the development and application of smart functional materials.

Transparent Soft Actuators/Sensors and Camouflage Skins for Imperceptible Soft Robotics.

The advent of soft robotics has led to great advancements in robots, wearables, and even manufacturing processes by employing entirely soft-bodied systems that interact safely with any random surfaces while providing great mechanical compliance. Moreover, recent developments in soft robotics involve advances in transparent soft actuators and sensors that have made it possible to construct robots that can function in a visually and mechanically unobstructed manner, assisting the operations of robots and creating more applications in various fields. In this aspect, imperceptible soft robotics that mainly consist of optically transparent imperceptible hardware components is expected to constitute a new research focus in the forthcoming era of soft robotics. Here, the recent progress regarding extended imperceptible soft robotics is provided, including imperceptible transparent soft robotics (transparent soft actuators/sensors) and imperceptible nontransparent camouflage skins. Their principles, materials selections, and working mechanisms are discussed so that key challenges and perspectives in imperceptible soft robotic systems can be explored.

Laser-Induced Crystalline-Phase Transformation for Hematite Nanorod Photoelectrochemical Cells.

Generally, a high-temperature postannealing process is required to enhance the photoelectrochemical (PEC) performance of hematite nanorod (NR) photoanodes. However, the thermal annealing time is limited to a short duration as thermal annealing at high temperatures can result in some critical problems, such as conductivity degradation of the fluorine-doped tin oxide film and deformation of the glass substrate. In this study, selective laser processing is introduced for hematite-based PEC cells as an alternative annealing process. The developed laser-induced phase transformation (LIPT) process yields hematite NRs with enhanced optical, chemical, and electrical properties for application in hematite NR-based PEC cells. Owing to its improved properties, the LIPT-processed hematite NR PEC cell exhibits an enhanced water oxidation performance compared to that processed by the conventional annealing process. As the LIPT process is conducted under ambient conditions, it would be an excellent alternative annealing technique for heat-sensitive flexible substrates in the future.

Mechano-thermo-chromic device with supersaturated salt hydrate crystal phase change.

Active control of transparency/color is the key to many functional optoelectric devices. Applying an electric field to an electrochromic or liquid crystal material is the typical approach for optical property control. In contrast to the conventional electrochromic method, we developed a new concept of smart glass using new driving mechanisms (based on mechanical stimulus and thermal energy) to control optical properties. This mechano-thermo-chromic smart glass device with an integrated transparent microheater uses a sodium acetate solution, which shows a unique marked optical property change under mechanical impact (mechanochromic) and heat (thermochromic). Such mechano-thermo-chromic devices may provide a useful approach in future smart window applications that could be operated by external environment conditions.

Stretchable/flexible silver nanowire Electrodes for energy device applications.

Research on sustainable and high-efficiency energy devices has recently emerged as an important global issue. These devices are now moving beyond the form of a bulk, rigid platform to a portable, flexible/stretchable format that is easily available in our daily lives. Similar to the development of an active layer for the production of next-generation energy devices, the fabrication of flexible/stretchable electrodes for the easy flow of electrons is also very important. Silver nanowire electrodes have high electronic conductivity even in a flexible/stretchable state due to their high aspect ratio and percolation network structures compared to conventional electrodes. Herein, we summarize the research in the field of flexible/stretchable electronics on energy devices fabricated using silver nanowires as the electrodes. Additionally, for a systematic presentation of the current research trends, this review classifies the surveyed research efforts into the categories of energy production, storage, and consumption.

Directional Shape Morphing Transparent Walking Soft Robot.

Transparency in electronics can provide extra functionality and esthetic impression. Transparency plays an important role in accurate soft robot control because one can directly observe target surface condition that is usually blocked by a robot's body. Nowadays, demand for soft actuators has been rapidly increasing because soft robots have attracted much attention recently. However, conventional soft actuators are usually nontransparent with simple isotropic bending, limited performance, and limited functionality. To overcome such limitations of current soft robots, we developed a novel soft shape morphing thin film actuator with new functionalities such as high transparency and unique directional responses to allow complex behavior by integrating a transparent metal nanowire heater. A figure of merit was developed to evaluate the performance and derive an optimum design configuration for the transparent actuator with enhanced performance. As a proof of concept, various transparent soft robots such as transparent gripper, Venus flytrap, and transparent walking robot were demonstrated. Such transparent directional shape morphing actuator is expected to open new application fields and functionalities overcoming limitations of current soft robots.

Moiré-Free Imperceptible and Flexible Random Metal Grid Electrodes with Large Figure-of-Merit by Photonic Sintering Control of Copper Nanoparticles.

Flexible micro/nano metal grid transparent conductors emerged as an alternative to the fragile/rigid indium tin oxide electrode. They are usually fabricated by the combination of the conventional photolithography and the vacuum deposition of regular metal grid patterns, however, seriously suffer from moiré and starburst problems induced by periodic regular pattern structures. In this paper, we demonstrated flexible and imperceptible random copper microconductors with an extremely high figure-of-merit (∼2000) by the thermal conduction layer-assisted photonic sintering of copper nanoparticles without damages in the plastic substrate. This process can be easily applied to complicated structures and surfaces including a random pattern which is imperceptible and free of interferences. As a proof-of-concept, a transparent windshield defogger in a car was demonstrated with a Cu transparent random conductor at an extreme and reversible fogging state.

ZnO/CuO/M (M = Ag, Au) Hierarchical Nanostructure by Successive Photoreduction Process for Solar Hydrogen Generation.

To date, solar energy generation devices have been widely studied to meet a clean and sustainable energy source. Among them, water splitting photoelectrochemical cell is regarded as a promising energy generation way for splitting water molecules and generating hydrogen by sunlight. While many nanostructured metal oxides are considered as a candidate, most of them have an improper bandgap structure lowering energy transition efficiency. Herein, we introduce a novel wet-based, successive photoreduction process that can improve charge transfer efficiency by surface plasmon effect for a solar-driven water splitting device. The proposed process enables to fabricate ZnO/CuO/Ag or ZnO/CuO/Au hierarchical nanostructure, having an enhanced electrical, optical, photoelectrochemical property. The fabricated hierarchical nanostructures are demonstrated as a photocathode in the photoelectrochemical cell and characterized by using various analytic tools.

Micropatterning of Metal Nanoparticle Ink by Laser-Induced Thermocapillary Flow.

Selective laser sintering of metal nanoparticle ink is a low-temperature and non-vacuum technique developed for the fabrication of patterned metal layer on arbitrary substrates, but its application to a metal layer composed of large metal area with small voids is very much limited due to the increase in scanning time proportional to the metal pattern density. For the facile manufacturing of such metal layer, we introduce micropatterning of metal nanoparticle ink based on laser-induced thermocapillary flow as a complementary process to the previous selective laser sintering process for metal nanoparticle ink. By harnessing the shear flow of the solvent at large temperature gradient, the metal nanoparticles are selectively pushed away from the scanning path to create metal nanoparticle free trenches. These trenches are confirmed to be stable even after the complete process owing to the presence of the accompanying ridges as well as the bump created along the scanning path. As a representative example of a metal layer with large metal area and small voids, dark-field photomask with Alphabetic letters are firstly created by the proposed method and it is then demonstrated that the corresponding letters can be successfully reproduced on the screen by an achromatic lens.

Ag/Au/Polypyrrole Core-shell Nanowire Network for Transparent, Stretchable and Flexible Supercapacitor in Wearable Energy Devices.

Transparent and stretchable energy storage devices have attracted significant interest due to their potential to be applied to biocompatible and wearable electronics. Supercapacitors that use the reversible faradaic redox reaction of conducting polymer have a higher specific capacitance as compared with electrical double-layer capacitors. Typically, the conducting polymer electrode is fabricated through direct electropolymerization on the current collector. However, no research have been conducted on metal nanowires as current collectors for the direct electropolymerization, even though the metal nanowire network structure has proven to be superior as a transparent, flexible, and stretchable electrode platform because the conducting polymer's redox potential for polymerization is higher than that of widely studied metal nanowires such as silver and copper. In this study, we demonstrated a highly transparent and stretchable supercapacitor by developing Ag/Au/Polypyrrole core-shell nanowire networks as electrode by coating the surface of Ag NWs with a thin layer of gold, which provide higher redox potential than the electropolymerizable monomer. The Ag/Au/Polypyrrole core-shell nanowire networks demonstrated superior mechanical stability under various mechanical bending and stretching. In addition, proposed supercapacitors showed fine optical transmittance together with fivefold improved areal capacitance compared to pristine Ag/Au core-shell nanowire mesh-based supercapacitors.