AP-XPS beamline, a platform for operando science at Pohang Accelerator Laboratory.

Beamline 8A (BL 8A) is an undulator-based soft X-ray beamline at Pohang Accelerator Laboratory. This beamline is aimed at high-resolution ambient-pressure X-ray photoelectron spectroscopy (AP-XPS), soft X-ray absorption spectroscopy (soft-XAS) and scanning photoemission microscopy (SPEM) experiments. BL 8A has two branches, 8A1 SPEM and 8A2 AP-XPS, that share a plane undulator, the first mirror (M1) and the monochromator. The photon beam is switched between the two branches by changing the refocusing mirrors after the monochromator. The acceptance angle of M1 is kept glancing at 1.2°, and Pt is coated onto the mirrors to achieve high reflectance, which ensures a wide photon energy range (100-2000 eV) with high resolution at a photon flux of ∼1013 photons s-1. In this article, the main properties and performance of the beamline are reported, together with selected experiments performed on the new beamline and experimental system.

Strain Relaxation of Graphene Layers by Cu Surface Roughening.

The surface morphology of copper (Cu) often changes after the synthesis of graphene by chemical vapor deposition (CVD) on a Cu foil, which affects the electrical properties of graphene, as the Cu step bunches induce the periodic ripples on graphene that significantly disturb electrical conduction. However, the origin of the Cu surface reconstruction has not been completely understood yet. Here, we show that the compressive strain on graphene induced by the mismatch of thermal expansion coefficient with Cu surface can be released by forming periodic Cu step bunching that depends on graphene layers. Atomic force microscopy (AFM) images and the Raman analysis show the noticeably longer and higher step bunching of Cu surface under multilayer graphene and the weaker biaxial compressive strain on multilayer graphene compared to monolayer. We found that the surface areas of Cu step bunches under multilayer and monolayer graphene are increased by ∼1.41% and ∼0.77% compared to a flat surface, respectively, indicating that the compressive strain on multilayer graphene can be more effectively released by forming the Cu step bunching with larger area and longer periodicity. We believe that our finding on the strain relaxation of graphene layers by Cu step bunching formation would provide a crucial idea to enhance the electrical performance of graphene electrodes by controlling the ripple density of graphene.

Black Phosphorus (BP) Nanodots for Potential Biomedical Applications.

Recently, the appeal of 2D black phosphorus (BP) has been rising due to its unique optical and electronic properties with a tunable band gap (≈0.3-1.5 eV). While numerous research efforts have recently been devoted to nano- and optoelectronic applications of BP, no attention has been paid to promising medical applications. In this article, the preparation of BP-nanodots of a few nm to <20 nm with an average diameter of ≈10 nm and height of ≈8.7 nm is reported by a modified ultrasonication-assisted solution method. Stable formation of nontoxic phosphates and phosphonates from BP crystals with exposure in water or air is observed. As for the BP-nanodot crystals' stability (ionization and persistence of fluorescent intensity) in aqueous solution, after 10 d, ≈80% at 1.5 mg mL(-1) are degraded (i.e., ionized) in phosphate buffered saline. They showed no or little cytotoxic cell-viability effects in vitro involving blue- and green-fluorescence cell imaging. Thus, BP-nanodots can be considered a promising agent for drug delivery or cellular tracking systems.

In-vitro cytotoxicity assessment of carbon-nanodot-conjugated Fe-aminoclay (CD-FeAC) and its bio-imaging applications.

We have investigated the cytotoxic assay of Fe-aminoclay (FeAC) nanoparticles (NPs) and simultaneous imaging in HeLa cells by photoluminescent carbon nanodots (CD) conjugation. Non-cytotoxic, photostable, and CD NPs are conjugated with cationic FeAC NPs where CD NPs play a role in bio-imaging and FeAC NPs act as a substrate for CD conjugation and help to uptake of NPs into cancer cells due to positively charged surface of FeAC NPs in physiological media. As increase of CD-FeAC NPs loading in HeLa cell in vitro, it showed slight cytotoxicity at 1000 µg/mL but no cytotoxicity for normal cells up to concentration of 1000 µg/mL confirmed by two 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) and neutral red (NR) assays, with further observations by 4',6-diamidino-2-phenylindole (DAPI) stained confocal microscopy images, possessing that CD-FeAC NPs can be used as potential drug delivery platforms in cancer cells with simultaneous imaging. Graphical abstract CD conjugation with organo-building blocks of delaminated FeAC NPs.

Preparation and atomic force microscopy (AFM) characterization of DNA scaffolds as a template for protein immobilization.

The design of DNA nanostructures is of fundamental importance, the intrinsic value of DNA as a building-block material lies in its ability to organize other bio-molecules with nanometer-scale spacing. Here, we report the fabrication of DNA scaffolds with nano-pores (< 10 nm size) that formed easily without the use of additives (i.e., avidin, biotin, polyamine, or inorganic materials) into large scale DNA nanostructures by controlling buffer pH and reaction temperature. Large scale DNA scaffolds with porous structures are stable and uniform at slightly acidic buffer pH values (pH 5.5) and at approximately room temperature (- 30 degrees C). The depth of the DNA scaffolds with randomly porous size (< 10 nm) was a maximum of approximately 8 nm. Protein immobilization results also confirmed that a fibronectin (FN) proteins/large scale DNA scaffolds/aminopropylytriethoxysilane (APS)/SiO2/Si substrate with high sensitivity formed in a well-defined manner. The DNA scaffolds can be applied for use with DNA based biochips, biophysics, and cell biology.

Octahedral Symmetry Modification Induced Orbital Occupancy Variation in VO2.

Octahedral symmetry is one of the parameters to tune the functional properties of complex oxides. VO2, a complex oxide with a 3d1 electronic system, exhibits an insulator-metal transition (IMT) near room temperature (∼68 °C), accompanying a change in the octahedral structure from asymmetrical to symmetrical. However, the role of octahedral symmetry in VO2 on the IMT characteristics is unclear. Crystal and electronic structure analyses combined with density-functional-theory calculations showed the bandwidth-controlled IMT characteristics of monoclinic VO2 with high octahedral symmetry. The expanded apical V-O length for a high octahedral symmetry of a VO2 film increased the bandwidth of the conduction band by depressing V 3d-O 2p hybridization. As a result, the interdimer hopping energy increased and thereby decreased the IMT temperature, although the short V-V chain enhanced electron correlation. These findings suggest that octahedral symmetry can control the IMT characteristics of VO2 by changing the orbital occupancy.

Creation of two-dimensional layered Zintl phase by dimensional manipulation of crystal structure.

The discovery of new families, beyond graphene, of two-dimensional (2D) layered materials has always attracted great attention. However, it has been challenging to artificially develop layered materials with honeycomb atomic lattice structure composed of multicomponents such as hexagonal boron nitride. Here, through the dimensional manipulation of a crystal structure from sp3-hybridized 3D-ZnSb, we create an unprecedented layered structure of Zintl phase, which is constructed by the staking of sp2-hybridized honeycomb ZnSb layers. Using structural analysis combined with theoretical calculation, it is found that the 2D-ZnSb has a stable and robust layered structure. The bidimensional polymorphism is a previously unobserved phenomenon at ambient pressure in Zintl families and can be a common feature of transition metal pnictides. This dimensional manipulation of a crystal structure thus provides a rational design strategy to search for new 2D layered materials in various compounds, enabling unlimited expansion of 2D libraries and corresponding physical properties.

Hierarchical carbon-silicon nanowire heterostructures for the hydrogen evolution reaction.

Silicon nanowires (SiNWs) opened up exciting possibilities in a variety of research fields due to their unique anisotropic morphologies, facile tuning capabilities, and accessible fabrication methods. The SiNW-based photoelectrochemical (PEC) conversion has recently been known to provide an efficiency superior to that of various photo-responsive semiconductor heterostructures. However, a challenge still remains in designing optimum structures to minimize photo-oxidation and photo-corrosion of the Si surface in a liquid electrolyte. Here, we report a simple method to synthesize hierarchically branched carbon nanowires (CNWs) on SiNWs utilizing copper vapor as the catalyst in a chemical vapor deposition (CVD) process, which exhibits outstanding photocatalytic activities for hydrogen generation along with excellent chemical stability against oxidation and corrosion. Thus, we believe that the CNW-SiNW photoelectrodes would provide a new route to developing high-performing cost-effective catalysts essential for advanced energy conversion and storage technologies.

Hierarchical Ag nanostructures on Sn-doped indium oxide nano-branches: super-hydrophobic surface for surface-enhanced Raman scattering.

Herein, we fabricated a super-hydrophobic SERS substrate using Sn-doped indium oxide (Indium-tin-oxide: ITO) nano-branches as a template. ITO nano-branches with tens of nanometer diameter are first fabricated through the vapor-liquid-solid (VLS) growth to provide roughness of the substrate. 10 nm thickness of Ag thin film was deposited and then treated with the post-annealing process to create numerous air-pockets in the Ag film, forming a hierarchical Ag nanostructures. The resulting substrate obtained Cassie's wetting property with a water contact angle of 151°. Compared to the normal hydrophobic Ag nanoparticle substrate, increase of about 4.25-fold higher SERS signal was obtained for 7 µL of rhodamine 6G aqueous solutions.

Enhanced Photocatalytic Performance Depending on Morphology of Bismuth Vanadate Thin Film Synthesized by Pulsed Laser Deposition.

We have fabricated high quality bismuth vanadate (BiVO4) polycrystalline thin films as photoanodes by pulsed laser deposition (PLD) without a postannealing process. The structure of the grown films is the photocatalytically active phase of scheelite-monoclinic BiVO4 which was obtained by X-ray diffraction (XRD) analysis. The change of surface morphology for the BIVO4 thin films depending on growth temperature during synthesis has been observed by scanning electron microscopy (SEM), and its influence on water splitting performance was investigated. The current density of the BiVO4 film grown on a glass substrate covered with fluorine-doped tin oxide (FTO) at 230 °C was as high as 3.0 mA/cm2 at 1.23 V versus the potential of the reversible hydrogen electrode (VRHE) under AM 1.5G illumination, which is the highest value so far in previously reported BiVO4 films grown by physical vapor deposition (PVD) methods. We expect that doping of transition metal or decoration of oxygen evolution catalyst (OEC) in our BiVO4 film might further enhance the performance.

Advanced carbon dots via plasma-induced surface functionalization for fluorescent and bio-medical applications.

Multifunctional carbon-based nanodots (C-dots) are synthesized using atmospheric plasma treatments involving reactive gases (oxygen and nitrogen). Surface design was achieved through one-step plasma treatment of C-dots (AC-paints) from polyethylene glycol used as a precursor. These AC-paints show high fluorescence, low cytotoxicity and excellent cellular imaging capability. They exhibit bright fluorescence with a quantum yield twice of traditional C-dots. The cytotoxicity of AC-paints was tested on BEAS2B, THLE2, A549 and hep3B cell lines. The in vivo experiments further demonstrated the biocompatibility of AC-paints using zebrafish as a model, and imaging tests demonstrated that the AC-paints can be used as bio-labels (at a concentration of <5 mg mL-1). Particularly, the oxygen plasma-treated AC-paints (AC-paints-O) show antibacterial effects due to increased levels of reactive oxygen species (ROS) in AC-paints (at a concentration of >1 mg mL-1). AC-paints can effectively inhibit the growth of Escherichia coli (E. coli) and Acinetobacter baumannii (A. baumannii). Such remarkable performance of the AC-paints has important applications in the biomedical field and environmental systems.

Triangular Black Phosphorus Atomic Layers by Liquid Exfoliation.

Few-layer black phosphorus (BP) is the most promising material among the two-dimensional materials due to its layered structure and the excellent semiconductor properties. Currently, thin BP atomic layers are obtained mostly by mechanical exfoliation of bulk BP, which limits applications in thin-film based electronics due to a scaling process. Here we report highly crystalline few-layer black phosphorus thin films produced by liquid exfoliation. We demonstrate that the liquid-exfoliated BP forms a triangular crystalline structure on SiO2/Si (001) and amorphous carbon. The highly crystalline BP layers are faceted with a preferred orientation of the (010) plane on the sharp edge, which is an energetically most favorable facet according to the density functional theory calculations. Our results can be useful in understanding the triangular BP structure for large-area applications in electronic devices using two-dimensional materials. The sensitivity and selectivity of liquid-exfoliated BP to gas vapor demonstrate great potential for practical applications as sensors.

Advanced nanoporous TiO2 photocatalysts by hydrogen plasma for efficient solar-light photocatalytic application.

We report an effect involving hydrogen (H2)-plasma-treated nanoporous TiO2(H-TiO2) photocatalysts that improve photocatalytic performance under solar-light illumination. H-TiO2 photocatalysts were prepared by application of hydrogen plasma of assynthesized TiO2(a-TiO2) without annealing process. Compared with the a-TiO2, the H-TiO2 exhibited high anatase/brookite bicrystallinity and a porous structure. Our study demonstrated that H2 plasma is a simple strategy to fabricate H-TiO2 covering a large surface area that offers many active sites for the extension of the adsorption spectra from ultraviolet (UV) to visible range. Notably, the H-TiO2 showed strong ·OH free-radical generation on the TiO2 surface under both UV- and visible-light irradiation with a large responsive surface area, which enhanced photocatalytic efficiency. Under solar-light irradiation, the optimized H-TiO2 120(H2-plasma treatment time: 120 min) photocatalysts showed unprecedentedly excellent removal capability for phenol (Ph), reactive black 5(RB 5), rhodamine B (Rho B) and methylene blue (MB) - approximately four-times higher than those of the other photocatalysts (a-TiO2 and P25) - resulting in complete purification of the water. Such well-purified water (>90%) can utilize culturing of cervical cancer cells (HeLa), breast cancer cells (MCF-7), and keratinocyte cells (HaCaT) while showing minimal cytotoxicity. Significantly, H-TiO2 photocatalysts can be mass-produced and easily processed at room temperature. We believe this novel method can find important environmental and biomedical applications.

An electrochemical approach to graphene oxide coated sulfur for long cycle life.

Owing to the possibilities of achieving high theoretical energy density and gravimetric capacity, sulfur has been considered as a promising cathode material for rechargeable lithium batteries. However, sulfur shows rapid capacity fading due to the irreversible loss of soluble polysulfides and the decrease in active sites needed for conducting agents. Furthermore, the low electrical conductivity of sulfur hampers the full utilization of active materials. Here we report that graphene oxide coated sulfur composites (GO-S/CB) exhibit improved electrochemical stability as well as enhanced rate performance, evidenced by various electrochemical analyses. The cyclic voltammetry and the galvanostatic cycling analysis revealed that the GO plays key roles in homogenizing the nanocomposite structures of the electrodes, in improving the electrochemical contact, and in minimizing the loss of soluble polysulfide intermediates. An electrochemical impedance spectroscopy analysis also confirms the enhanced structural stability of the GO-S/CB composites after battery operation. As a result, the GO-S/CB exhibited excellent cycle stability and specific capacity as high as ∼723.7 mA h g(-1) even after 100 cycles at 0.5 C.

Stable semiconductor black phosphorus (BP)@titanium dioxide (TiO2) hybrid photocatalysts.

Over the past few decades, two-dimensional (2D) and layered materials have emerged as new fields. Due to the zero-band-gap nature of graphene and the low photocatalytic performance of MoS2, more advanced semiconducting 2D materials have been prompted. As a result, semiconductor black phosphorus (BP) is a derived cutting-edge post-graphene contender for nanoelectrical application, because of its direct-band-gap nature. For the first time, we report on robust BP@TiO2 hybrid photocatalysts offering enhanced photocatalytic performance under light irradiation in environmental and biomedical fields, with negligible affected on temperature and pH conditions, as compared with MoS2@TiO2 prepared by the identical synthesis method. Remarkably, in contrast to pure few layered BP, which, due to its intrinsic sensitivity to oxygen and humidity was readily dissolved after just several uses, the BP@TiO2 hybrid photocatalysts showed a ~92% photocatalytic activity after 15 runs. Thus, metal-oxide-stabilized BP photocatalysts can be practically applied as a promising alternative to graphene and MoS2.

Eco-friendly carbon-nanodot-based fluorescent paints for advanced photocatalytic systems.

Fluorescent carbon nanomaterials, especially zero-dimensional (0D) carbon nanodots (CDs), are widely used in broad biological and optoelectronic applications. CDs have unique characteristics such as strong fluorescence, biocompatibility, sun-light response, and capability of mass-production. Beyond the previous green CD obtained from harmful natural substances, we report a new type of fluid-based fluorescent CD paints (C-paints) derived from polyethylene glycol (PEG; via simple ultrasound irradiation at room temperatures) and produced in quantum yields of up to ~14%. Additionally, C-paints possess a strong, UV- and visible-light-responsive photoluminescent (PL) property. Most especially, C-paints, by incorporation into a photocatalytic system, show additional roles in the emission of fluorescent light for activation of TiO2 nanoparticles (NPs) and the resultant detoxification of most organic dyes, thus further enabling embarkation in advanced water purification.

Carrier-transport mechanism of Er-silicide Schottky contacts to strained-silicon-on-insulator and silicon-on-insulator.

The current-voltage characteristics and the carrier-transport mechanism of the Er-silicide (ErSi1.7) Schottky contacts to strained-silicon-on-insulator (sSOI) and silicon-on-insulator (SOI) were investigated. Barrier heights of 0.74 eV and 0.82 eV were obtained for the sSOI and SOI structures, respectively. The barrier height of the sSOI structure was observed to be lower than that of the SoI structure despite the formation of a Schottky contact using the same metal silicide. The sSOI structure exhibited better rectification and higher current level than the SOI structure, which could be associated with a reduction in the band gap of Si caused by strain. The generation-recombination mechanism was found to be dominant in the forward bias for both structures. Carrier generation along with the Poole-Frenkel mechanism dominated the reverse-biased current in the SOI structure. The saturation tendency of the reverse leakage current in the sSOI structure could be attributed to strain-induced defects at the interface in non-lattice-matched structures.

One-step synthesis of N-doped graphene quantum sheets from monolayer graphene by nitrogen plasma.

High-quality N-doped graphene quantum sheets are successfully fabricated from as-grown monolayer graphene on Cu using nitrogen plasma, which can be transferred as a film-like layer or easily dispersed in an organic solvent for further optoelectronic or photoelectrochemical applications.

Innovative three-dimensional (3D) eco-TiO2 photocatalysts for practical environmental and bio-medical applications.

It is known that water purified by conventional TiO2 photocatalysts may not be safe enough for drinking, due to the toxicity by tiny existence of TiO2 nanoparticles after water treatment. We herein demonstrate a facile design of a three-dimensional (3D) TiO2 photocatalyst structure with which both the efficiency of purification and the safety level of the final purified water can be improved and ensured, respectively. The structure, consisting of 3D sulfur-doped TiO2 microtubes in nanotubes (eco-TiO2), is suitable for both environmental and bio-medical applications. Investigation of its formation mechanism reveals that anodic aluminum oxide (AAO), owing to a spatial constraint, causes a simple, nanoparticles-to-nanotubes structural rearrangement as a template for nanotube growth. It is found that eco-TiO2 can be activated under visible-light irradiation by non-metal (sulfur; S) doping, after which it shows visible-light photocatalytic activities over a range of solar energy. Importantly, an in vitro cytotoxicity test of well-purified water by eco-TiO2 confirms that eco-TiO2 satisfies the key human safety conditions.

Photoluminescent green carbon nanodots from food-waste-derived sources: large-scale synthesis, properties, and biomedical applications.

We have developed a simple approach for the large-scale synthesis of water-soluble green carbon nanodots (G-dots) from many kinds of large food waste-derived sources. About 120 g of G-dots per 100 kg of food waste can be synthesized using our simple and environmentally friendly synthesis approach. The G-dots exhibit a high degree of solubility in water because of the abundant oxygen-containing functional groups around their surface. The narrow band of photoluminescence emission (400-470 nm) confirms that the size of the G-dots (∼4 nm) is small because of a similar quantum effects and emission traps on the surfaces. The G-dots have excellent photostability; their photoluminescence intensity decreases slowly (∼8%) under continuous excitation with a Xe lamp for 10 days. We carried out cell viability assay to assess the effect of cytotoxicity by introducing G-dots in cells such as Chinese hamster ovary cells (CHO-K1), mouse muscle cells (C2C12), and African green monkey kidney cells (COS-7), up to a concentration of 2 mg mL(-1) for 24 h. Due to their high photostability and low cytotoxicity, these G-dots are excellent probes for in vitro bioimaging. Moreover, the byproducts (not including G-dots) of G-dot synthesis from large food-waste derived sources promoted the growth and development of seedlings germinated on 3DW-supplemented gauze. Because of the combined advantages of green synthesis, high aqueous stability, high photostability, and low cytotoxicity, the G-dots show considerable promise in various areas, including biomedical imaging, solution state optoelectronics, and plant seed germination and/or growth.