Electrochemically Activatable Liquid Organic Hydrogen Carriers and Their Applications.

Hydrogen has been chosen as an environmentally benign energy source to replace fossil-fuel-based energy systems. Since hydrogen is difficult to store and transport in its gaseous phase, thermochemical liquid organic hydrogen carriers (LOHCs) have been developed as one of the alternative technologies. However, the high temperature and pressure requirements of thermochemical LOHC systems result in huge energy waste and impracticality. This Perspective proposes electrochemical (EC)-LOHCs capable of more efficient, safer, and lower temperature and pressure hydrogen storage/utilization. To enable this technology, several EC-LOHC candidates such as isopropanol, phenolic compounds, and organic acids are described, and the latest research trends and design concepts of related homo/hetero-based electrocatalysts are discussed. In addition, we propose efficient fuel-cell-based systems that implement electrochemical (de)hydrogenation of EC-LOHCs and present prospects for relevant technologies.

Ultra-Stable and Highly Efficient White Light Emitting Diodes through CsPbBr3 Perovskite Nanocrystals-Silica Composite Phosphor Functionalized with Surface Phenyl Molecules.

Poor stability of CsPbBr3 perovskite nanocrystals (NCs) to moisture/heat/light has significantly limited their application as a green phosphor, despite their outstanding luminescent properties. Here, a remarkably stable CsPbBr3 NCs-silica composite phosphor functionalized with surface phenyl molecules (CsPbBr3 -SiO2 Ph ) is synthesized by controlling low-temperature hydrolysis and condensation reaction of perhydropolysilazane in the presence of CsPbBr3 NCs followed by phenyl-functionalization. Through the process, CsPbBr3 NCs are confined in a compact silica matrix, which is impermeable to H2 O. The synthesis strategy is extended to a classical red quantum dot, CdZnSeS@ZnS NCs, to fabricate a white light emitting diode (WLED) consisting of CsPbBr3 -SiO2 Ph and CdZnSeS@ZnS-SiO2 Ph phosphor and silicone resin packaged on a commercial blue InGaN chip with luminous efficacy (LE) of 9.36 lm W-1 . The WLED undergoes enhancements in both green and red photoluminescence over time to achieve a highly efficient performance of 38.80 lm W-1 . More importantly, the WLED exhibits unprecedented operational stability of LE/LE0  = 94% after 101 h-operation at 20 mA (2.56 V). The ultra-high operational stability and efficient performance are mainly attributed to thermal curing and aging through which grain growth occurs as well as deactivation of defect states by permeated atmospheric O2 .

Chemical Fields: Directing Atom Migration in the Multiphasic Nanocrystal.

ConspectusAtoms in a bulk solid phase are usually trapped to fixed positions and can change their position only under certain conditions (e.g., at a melting point) due to the high energy barrier of migration between positions within the crystal lattice. Contrary to the atoms in the bulk solid phase, however, atoms in nanoparticles can migrate and change their local positions rather easily, enabled by the high surface energies. The energy states of surface atoms of nanoparticles can be altered by surface-binding moieties, which in turn influence the intrananoparticle migration of atoms at the subsurface of nanoparticles. In 2008, this possibility of intrananoparticle migration was demonstrated with RhPd alloy nanoparticles under the different gas environments of reductive CO or oxidative NO. We envisaged that the explosive expansion of well-defined, multiphasic nanoparticle libraries might be realized by specifically dictating the atom migration direction, by modulating the energy state of specific atoms in the multiphasic nanocrystals. The nanoparticle surface energy is a function of a myriad of factors, namely, surface binding moiety, structural features affecting coordination number of atoms such as nanoparticle geometry, steps, and kinks, and the existence of heterointerface with lattice mismatch. Therefore, all these factors affecting atom energy state in the nanoparticle, categorically termed as "chemical field" (CF), can serve as the driving force for purposeful directional movement of atoms within nanoparticles and subsequent reaction. Geometrically well-defined multiphasic nanocrystals present great promises toward various applications with special emphasis on catalysis and thus are worthy synthetic targets. In recent years, we have demonstrated that manipulation of CFs is an effective synthetic strategy for a variety of geometrically well-defined multiphasic nanocrystals. Herein, we classified multiphasic nanocrystals into metallic alloy systems and ionic systems (metal compounds) because the modes of CF are rather different between these two systems. The migration-directing CFs for neutral metallic atoms are mostly based on the local distribution of elements, degree of alloying, or highly energetic structural features. On the other hand, for the ionic system, structural parameters originating from the discrepancy between cations and anions should be more considered; ionic radii, phase stability, lattice strain, anionic frameworks, cation vacancies, etc. can react as CFs affecting atom migration behavior in the multiphasic ionic nanocrystals. We expect that the limits and potentials of CF-based synthesis of multiphasic nanocrystals described in this work will open a wide avenue to diverse material compositions and geometries, which have been difficult or impossible to approach via conventional nanoparticle synthesis schemes.

Performance Promotion of Multipurpose Catalysts Using Increased Oxygen Vacancy Amounts by Charge-Mismatched Doping.

Modulating the oxygen vacancy (V0) in nanostructures has opened a new avenue for efficient catalyst design, facilitating biomass oxidation reactions and electrocatalytic properties. In this study, we have investigated the properties of NiO-based catalysts with varying degrees of V0 achieved through ion doping of the catalyst with cations of different oxidation states (TM3+) or the same valence state (TM2+) as Ni2+ in the NiO matrix. By introducing charge-mismatched dopants, we enhanced the concentration of V0 in the NiO catalyst, resulting in remarkable selectivity (∼50%) for the conversion of 2,5-hydroxymethylfurfural (HMF) to 2,5-furandicarboxylic acid (FDCA), as well as a lower overpotential in the oxygen evolution reaction (OER). We believe that charge-mismatched doping offers a novel avenue for optimizing defect engineering in oxide-based catalysts, which can enable more efficient biomass conversion and water splitting. These findings have made a significant contribution to the field of multipurpose catalysis and hold the potential to inspire new catalyst designs that would usher in a more sustainable future.

Modulating the Local Coordination Environment of Single-Atom Catalysts for Enhanced Catalytic Performance in Hydrogen/Oxygen Evolution Reaction.

Single-atom catalysts (SACs) hold the promise of utilizing 100% of the participating atoms in a reaction as active catalytic sites, achieving a remarkable boost in catalytic efficiency. Thus, they present great potential for noble metal-based electrochemical application systems, such as water electrolyzers and fuel cells. However, their practical applications are severely hindered by intrinsic complications, namely atom agglomeration and relocation, originating from the uncontrollably high surface energy of isolated single-atoms (SAs) during postsynthetic treatment processes or catalytic reactions. Extensive efforts have been made to develop new methodologies for strengthening the interactions between SAs and supports, which could ensure the desired stability of the active catalytic sites and their full utilization by SACs. This review covers the recent progress in SACs development while emphasizing the association between the regulation of coordination environments (e.g., coordination atoms, numbers, sites, structures) and the electrocatalytic performance of the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER). The crucial role of coordination chemistry in modifying the intrinsic properties of SACs and manipulating their metal-loading, stability, and catalytic properties is elucidated. Finally, the future challenges of SACS development and the industrial outlook of this field are discussed.

Intermetallic PtCu Nanoframes as Efficient Oxygen Reduction Electrocatalysts.

Nanoframe alloy structures represent a class of high-performance catalysts for the oxygen reduction reaction (ORR), owing to their high active surface area, efficient molecular accessibility, and nanoconfinement effect. However, structural and chemical instabilities of nanoframes remain an important challenge. Here, we report the synthesis of PtCu nanoframes constructed with an atomically ordered intermetallic structure (O-PtCuNF/C) showing high ORR activity, durability, and chemical stability. We rationally designed the O-PtCuNF/C catalyst by combining theoretical composition predictions with a silica-coating-mediated synthesis. The O-PtCuNF/C combines intensified strain and ligand effects from the intermetallic PtCu L11 structure and advantages of the nanoframes, resulting in superior ORR activity to disordered alloy PtCu nanoframes (D-PtCuNF/C) and commercial Pt/C catalysts. Importantly, the O-PtCuNF/C showed the highest ORR mass activity among PtCu-based catalysts. Furthermore, the O-PtCuNF/C exhibited higher ORR durability and far less etching of constituent atoms than D-PtCuNF/C and Pt/C, attesting to the chemically stable nature of the intermetallic structure.

Ga-Based Liquid Metal Micro/Nanoparticles: Recent Advances and Applications.

Liquid metals are emerging as fluidic inorganic materials in various research fields. Micro- and nanoparticles of Ga and its alloys have received particular attention in the last decade due to their non toxicity and accessibility in ambient conditions as well as their interesting chemical, physical, mechanical, and electrical properties. Unique features such as a fluidic nature and self-passivating oxide skin make Ga-based liquid metal particles (LMPs) distinguishable from conventional inorganic particles in the context of synthesis and applications. Here, recent advances in the bottom-up and top-down synthetic methods of Ga-based LMPs, their physicochemical properties, and their applications are summarized. Finally, the current status of the LMPs is highlighted and perspectives on future directions are also provided.

Hollow nanoparticles as emerging electrocatalysts for renewable energy conversion reactions.

While the realization of clean and sustainable energy conversion systems primarily requires the development of highly efficient catalysts, one of the main issues had been designing the structure of the catalysts to fulfill minimum cost as well as maximum performance. Until now, noble metal-based nanocatalysts had shown outstanding performances toward the oxygen reduction reaction (ORR), oxygen evolution reaction (OER), and hydrogen evolution reaction (HER). However, the scarcity and high cost of them impeded their practical use. Recently, hollow nanostructures including nanocages and nanoframes had emerged as a burgeoning class of promising electrocatalysts. The hollow nanostructures could expose a high proportion of active surfaces while saving the amounts of expensive noble metals. In this review, we introduced recent advances in the synthetic methodologies for generating noble metal-based hollow nanostructures based on thermodynamic and kinetic approaches. We summarized electrocatalytic applications of hollow nanostructures toward the ORR, OER, and HER. We next provided strategies that could endow structural robustness to the flimsy structural nature of hollow structures. Finally, we concluded this review with perspectives to facilitate the development of hollow nanostructure-based catalysts for energy applications.

Dendrite-Embedded Platinum-Nickel Multiframes as Highly Active and Durable Electrocatalyst toward the Oxygen Reduction Reaction.

Pt-based nanoframe catalysts have been explored extensively due to their superior activity toward the oxygen reduction reaction (ORR). Herein, we report the synthesis of Pt-Ni multiframes, which exhibit the unique structure of tightly fused multiple nanoframes and reinforced by an embedded dendrite. Rapid reduction and deposition of Ni atoms on Pt-Ni nanodendrites induce the alloying/dealloying of Pt and Ni in the overall nanostructures. After chemical etching of Ni, the newly formed dendrite-embedded Pt-Ni multiframes show an electrochemically active surface area (ECSA) of 73.4 m2 gPt-1 and a mass ORR activity of 1.51 A mgPt-1 at 0.93 V, which is 30-fold higher than that of the state-of-the-art Pt/C catalyst. We suggest that high ECSA and ORR performances of dendrite-embedded Pt-Ni multiframes/C can be attributed to the porous nanostructure and numerous active sites exposed on surface grain boundaries and high-indexed facets.

Nitrosoreductase-Like Nanocatalyst for Ultrasensitive and Stable Biosensing.

Enzyme-like nanocatalytic reactions developed for high signal amplification in biosensors are of limited use because of their low reaction rates and/or unwanted side reactions in aqueous electrolyte solutions containing dissolved O2. Herein, we report a nitrosoreductase-like catalytic reaction, employing 4-nitroso-1-naphthol, Pd nanoparticles, and H3N-BH3, which affords a high reaction rate and minimal side reactions, enabling its use in ultrasensitive electrochemical biosensors. 4-Nitroso-1-naphthol was chosen after five hydroxy-nitro(so)arene compounds were compared in terms of high signal and low background levels. Importantly, the nanocatalytic reaction occurs without the self-hydrolysis and induction period observed in the nanocatalytic reduction of nitroarenes by NaBH4. The high signal level results from (i) fast nanocatalytic 4-nitroso-1-naphthol reduction, (ii) fast electrochemical redox cycling, and (iii) the low influence of dissolved O2. The low background level results from (i) slow direct reaction between 4-nitroso-1-naphthol and H3N-BH3, (ii) slow electrode-mediated reaction between 4-nitroso-1-naphthol and H3N-BH3, and (iii) slow electrooxidation of H3N-BH3 at electrode. When applied to the detection of parathyroid hormone, the detection limit of the newly developed biosensor was ∼0.3 pg/mL. The nitrosoreductase-like nanocatalytic reaction is highly promising for ultrasensitive and stable biosensing.

Host Cell Mimic Polymersomes for Rapid Detection of Highly Pathogenic Influenza Virus via a Viral Fusion and Cell Entry Mechanism.

Highly pathogenic avian influenza virus (HPAIV) infections have occurred continuously and crossed the species barrier to humans, leading to fatalities. A polymerase chain reaction based molecular test is currently the most sensitive diagnostic tool for HPAIV; however, the results must be analyzed in centralized diagnosis systems by a trained individual. This requirement leads to delays in quarantine and isolation. To control the spread of HPAIV, rapid and accurate diagnostics suitable for field testing are needed, and the tests must facilitate a differential diagnosis between HPAIV and low pathogenic avian influenza virus (LPAIV), which undergo cleavage specifically by trypsin- or furin-like proteases, respectively. In this study, a differential avian influenza virus rapid test kit is developed and evaluated in vitro and using clinical specimens from HPAIV H5N1-infected animals. It is demonstrated that this rapid test kit provides highly sensitive and specific detection of HPAIV and LPAIV and is thus a useful field diagnostic tool for H5N1 HPAIV outbreaks and for rapid quarantine control of the disease.

Ni@Ru and NiCo@Ru Core-Shell Hexagonal Nanosandwiches with a Compositionally Tunable Core and a Regioselectively Grown Shell.

The development of highly active electrocatalysts is crucial for the advancement of renewable energy conversion devices. The design of core-shell nanoparticle catalysts represents a promising approach to boost catalytic activity as well as save the use of expensive precious metals. Here, a simple, one-step synthetic route is reported to prepare hexagonal nanosandwich-shaped Ni@Ru core-shell nanoparticles (Ni@Ru HNS), in which Ru shell layers are overgrown in a regioselective manner on the top and bottom, and around the center section of a hexagonal Ni nanoplate core. Notably, the synthesis can be extended to NiCo@Ru core-shell nanoparticles with tunable core compositions (Ni3 Cox @Ru HNS). Core-shell HNS structures show superior electrocatalytic activity for the oxygen evolution reaction (OER) to a commercial RuO2 black catalyst, with their OER activity being dependent on their core compositions. The observed trend in OER activity is correlated to the population of Ru oxide (Ru4+ ) species, which can be modulated by the core compositions.

Interscalene brachial plexus bolus block versus patient-controlled interscalene indwelling catheter analgesia for the first 48 hours after arthroscopic rotator cuff repair.

BACKGROUND: We sought to compare the efficacy of interscalene brachial plexus bolus blockade (IBPBB) and patient-controlled interscalene indwelling catheter analgesia (PCIA) for postoperative pain management within 48 hours postoperatively in patients undergoing arthroscopic rotator cuff repairs (ARCR). METHODS: Patients undergoing ARCR were randomized into 3 groups by postoperative analgesia method. The IBPBB group received a mixed solution of 16 mL of 0.75% ropivacaine and 4 mL of 2% lidocaine as a bolus postoperatively. The PCIA group received a 10-mL bolus solution of 0.75% ropivacaine (4 mL) and 5% dextrose water (6 mL) just after the operation and continuous infusion of this solution. The control received only meperidine as needed, 12.5 mg, intravenously. Visual analog scale (VAS) pain scores were evaluated for the first 48 hours postoperatively. RESULTS: For the first 2 hours postoperatively, VAS scores in the IBPBB group were significantly lower than in the PCIA group and control group, but at 12 and 24 hours postoperatively, VAS scores of the IBPBB group were significantly higher than the PCIA group (P < .05). At 48 hours postoperatively, there was no significant difference in VAS scores among the 3 groups (P = .169). The method of analgesia was the only factor affecting pain scores at 24 hours postoperatively (P < .05). CONCLUSIONS: IBPBB provided effective immediate postoperative analgesia until 6 hours postoperatively. Especially until postoperative 2 hours, the VAS pain score was less than 1 point in the IBPBB group; however, there was significant rebound pain at 12 hours after surgery. During the first 24 hours postoperatively, PCIA reduced postoperative pain without rebound pain. Surgeons should choose methods for control of postoperative pain considering the advantages and disadvantages of each analgesic method.

Cactus-Like Hollow Cu2-x S@Ru Nanoplates as Excellent and Robust Electrocatalysts for the Alkaline Hydrogen Evolution Reaction.

The development of Pt-free electrocatalysts for the hydrogen evolution reaction (HER) recently is a focus of great interest. While several strategies are developed to control the structural properties of non-Pt catalysts and boost their electrocatalytic activities for the HER, the generation of highly reactive defects or interfaces by combining a metal with other metals, or with metal oxides/sulfides, can lead to notably enhanced catalytic performance. Herein, the preparation of cactus-like hollow Cu2-x S@Ru nanoplates (NPs) that contain metal/metal sulfide heterojunctions and show excellent catalytic activity and durability for the HER in alkaline media is reported. The initial formation of Ru islands on presynthesized Cu1.94 S NPs, via cation exchange between three Cu+ ions and one Ru3+ , induces the growth of the Ru phase, which is concomitant with the dissolution of the Cu1.94 S nanotemplate, culminating in the formation of a hollow nanostructure with numerous thin Ru pillars. Hollow Cu2-x S@Ru NPs exhibit a small overpotential of 82 mV at a current density of -10 mA cm-2 and a low Tafel slope of 48 mV dec-1 under alkaline conditions; this catalyst is among state-of-the-art HER electrocatalysts in alkaline media. The excellent performance of hollow Cu2-x S@Ru NPs originates from the facile dissociation of water in the Volmer step.

Ionic-Liquid-Based Heterogeneous Covalent Triazine Framework Cobalt Catalyst for the Direct Synthesis of Methyl 3-Hydroxybutyrate from Propylene Oxide.

ß-Hydroxy esters are considered as potential building blocks for the production of fine chemicals and potential drug molecules in various industries. Developing an efficient and recyclable catalyst for the synthesis of ß-hydroxy esters is challenging. Here we report the first ionic-liquid-based heterogenized cobalt catalyst, [imidazolium-CTF][Co(CO)4], for the direct ring-opening carbonylation of propylene oxide to methyl 3-hydroxybutyrate (MHB) with 86% selectivity (>99% conversion).

Plasmon Enhanced Direct Bandgap Emissions in Cu7 S4 @Au2 S@Au Nanorings.

Nanostructured copper sulfides, promising earth-abundant p-type semiconductors, have found applications in a wide range of fields due to their versatility, tunable low bandgap, and environmental sustainability. The synthesis of hexagonal Cu7 S4 @Au2 S@Au nanorings exhibiting plasmon enhanced emissions at the direct bandgap is reported. The synthesized Cu7 S4 @Au2 S@Au nanorings show greatly enhanced absorption and emission by local plasmons compared to pure copper sulfide nanoparticles.

Synergistic Effect of Detection and Separation for Pathogen Using Magnetic Clusters.

Early diagnosis of infectious diseases is important for treatment; therefore, selective and rapid detection of pathogenic bacteria is essential for human health. We report a strategy for highly selective detection and rapid separation of pathogenic microorganisms using magnetic nanoparticle clusters. Our approach to develop probes for pathogenic bacteria, including Salmonella, is based on a theoretically optimized model for the size of clustered magnetic nanoparticles. The clusters were modified to provide enhanced aqueous solubility and versatile conjugation sites for antibody immobilization. The clusters with the desired magnetic property were then prepared at critical micelle concentration (CMC) by evaporation-induced self-assembly (EISA). Two different types of target-specific antibodies for H- and O-antigens were incorporated on the cluster surface for selective binding to biological compartments of the flagella and cell body, respectively. For the two different specific binding properties, Salmonella were effectively captured with the O-antibody-coated polysorbate 80-coated magnetic nanoclusters (PCMNCs). The synergistic effect of combining selective targeting and the clustered magnetic probe leads to both selective and rapid detection of infectious pathogens.

Core/shell-structured upconversion nanophosphor and cadmium-free quantum-dot bilayer-based near-infrared photodetectors.

The core/shell-structured upconversion nanophosphors (UCNPs) and Cd-free CuInS(2)/ZnS quantum dots (QDs) were synthesized via coprecipitation and hot-injection methods, respectively, and they were applied to near infrared (NIR) photodetectors. The ß-NaYF(4):Yb,Er/ß-NaYF(4) UCNPs emitted intense visible light peaking at 522, 542, and 656 nm via (2)H(11/2), (4)S(3/2), and (4)F(9/2)→(4)I(15/2) transitions under excitation with 980 nm NIR light. The core/shell UCNPs showed 6.4 times higher emission intensity than core UCNPs. Charge carriers can be generated from CuInS(2)/ZnS QDs in the QD-UCNP mixture due to their broad absorption in the visible spectral region shorter than 600 nm. The photodetector devices were fabricated by spin-coating CuInS(2)/ZnS QDs on a SiO(2)/Si substrate with patterned gold electrodes followed by spin-coating UCNPs on the QD layer. The fabricated QD-UCNP-bilayer-based device showed a drastically increased photocurrent (128 µA) compared with the QD-layer-based device under 980 nm NIR light illumination. Additionally, the fabricated device showed stable ON-OFF switching properties against on and off NIR light.

Gadolinium-based nanoparticles for highly efficient T1-weighted magnetic resonance imaging.

We developed Pyrene-Gadolinium (Py-Gd) nanoparticles as pH-sensitive magnetic resonance imaging (MRI) contrast agents capable of showing a high-Mr signal in cancer-specific environments, such as acidic conditions. Py-Gd nanoparticles were prepared by coating Py-Gd, which is a complex of gadolinium with pyrenyl molecules, with pyrenyl polyethyleneglycol PEG using a nano-emulsion method. These particles show better longitudinal relaxation time (T1) MR signals in acidic conditions than they do in neutral conditions. Furthermore, the particles exhibit biocompatibility and MR contrast effects in both in vitro and in vivo studies. From these results, we confirm that Py-Gd nanoparticles have the potential to be applied for accurate cancer diagnosis and therapy.

Nanoscale-Confined Synthesis of 2D Metal Compounds for Electrochemical Applications.

2D metal compounds, such as transition metal dichalcogenides (TMDs), layered double hydroxides (LDHs), and MXenes, are emerging as important electrocatalyst materials in the transition to a sustainable energy future. Aided by their high surface area, electrical conductivity, and tunable electronic properties, these materials have provided a crucial research thrust in enhancing the efficiency of green hydrogen production, fuel cells, and carbon reduction processes. Most importantly, the synthesis of nanostructured 2D compounds, while challenging, is the key to optimizing their catalytic performance. Recent advancements in this field have highlighted the potential of 2D metal compounds in revolutionizing energy conversion technologies, which entails the discovery of new material compositions, the development of novel synthetic routes, and the integration of these materials into practical energy conversion systems. This review presents an overview of the distinctive characteristics of nanoscale-confined 2D metal compounds, the challenges encountered in their synthesis, and electrochemical applications.