Effect of membrane performance variability with temperature and feed composition on pervaporation and vapor permeation system design for solvent drying.

BACKGROUND: The presence of water in organic solvents and biofuels can complicate their production and reuse because many hydrophilic solvents form difficult-to-separate mixtures with water (e.g., azeotropes). Pervaporation (PV) and vapor permeation (V⋅P) remove water from such mixtures via selective solution-diffusion transport through a membrane material. A recent article reviewed design factors that impact the effectiveness of PV/V⋅P solvent dehydration processes (J. Chem. Technol. Biotechnol 95: 495-512 (2020)). For the sake of simplicity, the earlier work assumed constant membrane permeabilities. The objective here is to explore the impact of variable permeabilities on predictions of PV/V⋅P system performance. RESULTS: A multiparameter expression relating permeability to process conditions was incorporated into the spreadsheet calculators from the previous work. Use of the expression was demonstrated with literature ethanol/water PV data for a NaA zeolite material and two poly (vinyl alcohol) (PVA) membranes. The variable permeabilities of the membranes yielded membrane area requirements that were 20-30% different from those calculated using permeances fixed at either end of the target water range. The impact of composition-dependent permeabilities was most pronounced on the fraction of ethanol transferred to the permeate for the NaA membrane. CONCLUSION: The inclusion of membrane permeabilities that vary with fluid composition and temperature noticeably altered predictions of the membrane area required to carry out water removal from ethanol by PV and of the transfer of ethanol to the permeate stream. Unless a PV/V⋅P process is expected to operate at a constant temperature and in a narrow concentration range, process performance estimates would be improved by inclusion of concentration- and temperature-dependent permeabilities or permeances.

Energy efficient vortex-enhanced water evaporation technology for concentrated brine management: Theory and process simulation evaluation.

Desalination drinking water systems and industrial processes generating high salinity streams require practical brine management options for disposal and/or treatment. Treatment most often involves large capacity brine concentrating processes, on the order of 2000 m3/day, that rely on water evaporation, vapor compression, and condensation. A new technology adds an aerosol-generating device to the evaporation step with the goal of energy efficient operation even at smaller scales. The principles behind the tornadic flowfield that breaks up and aerosolizes water as air and water flow over the machined surface in the device are introduced. Design of a 6.8 m3/day demonstration system, based on this new technology, producing a NaCl slurry (55 wt% solids) from a 22 wt% NaCl influent is described. Simulations of the system with three influent brine concentrations and three forms of final NaCl concentrate are presented and predicted energy usage is compared to estimates for conventional systems. By varying simulation process parameters, the heat transfer performance of the evaporator/condenser is identified as having a large impact on overall efficiency. The new system is anticipated to be most competitive, on an energy usage basis, with conventional concentrator/crystallizer systems when processing higher salinity brines and producing final concentrates containing precipitated NaCl.

Review of Pervaporation and Vapor Permeation Process Factors Affecting the Removal of Water from Industrial Solvents.

A recent review article (J Chem Technol Biotechnol 94: 343-365 (2019)) identified several commercially-available permselective materials for drying organic solvents with pervaporation (PV) and vapor permeation (V·P) separation processes. The membrane materials included polymeric and inorganic substances exhibiting a range in the performance characteristics: water permeance, water/solvent selectivity, and maximum use temperature. This paper provides an overview of the factors affecting the design of PV/V·P processes utilizing these membranes to remove water from common organic solvents. Properties of the specific membrane and of the solvent substantially affect the PV/V·P separation. Equally important is the impact of operating parameters on the overall separation. To study these impacts, simplified process performance equations and detailed spreadsheet calculations were developed for single-pass and recirculating batch PV systems and for single-pass V·P systems. Estimates of membrane area, permeate concentration, solvent recovery, permeate condenser temperatures, and heating requirements were calculated. Process variables included: solvent type, water permeance, water/solvent selectivity, initial and final water concentrations, operating temperature (PV) or feed pressure (V·P), temperature drop due to evaporation (PV) or feed-side pressure drop (V·P), and permeate pressure. The target solvents considered were: acetonitrile, 1-butanol, N,N-dimethyl formamide, ethanol, methanol, methyl isobutyl ketone, methyl tert-butyl ether, tetrahydrofuran, acetone, and 2-propanol.

Review: Membrane Materials for the Removal of Water from Industrial Solvents by Pervaporation and Vapor Permeation.

Organic solvents are widely used in a variety of industrial sectors. Reclaiming and reusing the solvents may be the most economically and environmentally beneficial option for managing spent solvents. Purifying the solvents to meet reuse specifications can be challenging. For hydrophilic solvents, water must be removed prior to reuse, yet many hydrophilic solvents form hard-to-separate azeotropic mixtures with water. Such mixtures make separation processes energy intensive and cause economic challenges. The membrane processes pervaporation (PV) and vapor permeation (VP) can be less energy intensive than distillation-based processes and have proven to be very effective in removing water from azeotropic mixtures. In PV/VP, separation is based on the solution-diffusion interaction between the dense permselective layer of the membrane and the solvent/water mixture. This review provides a state-of-the-science analysis of materials used as the selective layer(s) of PV/VP membranes in removing water from organic solvents. A variety of membrane materials, such as polymeric, inorganic, mixed matrix, and hybrid, have been reported in the literature. A small subset of these are commercially available and highlighted here: poly(vinyl alcohol), polyimides, amorphous perfluoro polymers, NaA zeolites, chabazite zeolites, T-type zeolites, and hybrid silicas. The typical performance characteristics and operating limits of these membranes are discussed. Solvents targeted by the U.S. Environmental Protection Agency for reclamation are emphasized and ten common solvents are chosen for analysis: acetonitrile, 1-butanol, N,N-dimethyl formamide, ethanol, methanol, methyl isobutyl ketone, methyl tert-butyl ether, tetrahydrofuran, acetone, and 2-propanol.

Review: Water recovery from brines and salt-saturated solutions: operability and thermodynamic efficiency considerations for desalination technologies.

BACKGROUND: When water is recovered from a saline source, a brine concentrate stream is produced. Management of the brine stream can be problematic, particularly in inland regions. An alternative to brine disposal is recovery of water and possibly salts from the concentrate. RESULTS: This review provides an overview of desalination technologies and discusses the thermodynamic efficiencies and operational issues associated with the various technologies particularly with regard to high salinity streams. CONCLUSION: Due to the high osmotic pressures of the brine concentrates, reverse osmosis, the most common desalination technology, is impractical. Mechanical vapor compression which, like reverse osmosis, utilizes mechanical work to operate, is reported to have the highest thermodynamic efficiency of the desalination technologies for treatment of salt-saturated brines. Thermally-driven processes, such as flash evaporation and distillation, are technically able to process saturated salt solutions, but suffer from low thermodynamic efficiencies. This inefficiency could be offset if an inexpensive source of waste or renewable heat could be used. Overarching issues posed by high salinity solutions include corrosion and the formation of scales/precipitates. These issues limit the materials, conditions, and unit operation designs that can be used.

Functional neuroimaging of the baboon during concurrent image-guided transcranial magnetic stimulation.

Transcranial magnetic stimulation (TMS) has well-established applications in basic neuroscience and promising applications in neurological and psychiatric disorders. However the underlying mechanisms of TMS-induced alterations in brain function are not well understood. As a result, treatment design parameters are determined ad hoc and not informed by any coherent theory or model. Once the mechanisms underlying TMS's modulatory effects on brain systems are better understood and modeled, TMS's potential as a therapeutic and/or investigative tool will be more readily explored and exploited. An animal model is better suited to study different TMS variables, therefore we developed a baboon model to facilitate testing of some of the current theoretical models of TMS interactions with brain regions. We have demonstrated the feasibility of this approach by successfully imaging cerebral blood flow (CBF) changes with H(2)(15)O positron emission tomography imaging during high-frequency, suprathreshold repetitive TMS in the primary motor cortex of five healthy, adult baboons.

Whole Genome Sequence Data From Captive Baboons Implicate RBFOX1 in Epileptic Seizure Risk.

In this study, we investigate the genetic determinants that underlie epilepsy in a captive baboon pedigree and evaluate the potential suitability of this non-human primate model for understanding the genetic etiology of human epilepsy. Archived whole-genome sequence data were analyzed using both a candidate gene approach that targeted variants in baboon homologs of 19 genes (n = 20,881 SNPs) previously implicated in genetic generalized epilepsy (GGE) and a more agnostic approach that examined protein-altering mutations genome-wide as assessed by snpEff (n = 36,169). Measured genotype association tests for baboon cases of epileptic seizure were performed using SOLAR, as well as gene set enrichment analyses (GSEA) and protein-protein interaction (PPI) network construction of top association hits genome-wide (p < 0.01; n = 441 genes). The maximum likelihood estimate of heritability for epileptic seizure in the pedigreed baboon sample is 0.76 (SE = 0.77; p = 0.07). Among candidate genes for GGE, a significant association was detected for an intronic SNP in RBFOX1 (p = 5.92 × 10-6; adjusted p = 0.016). For protein-altering variants, no genome-wide significant results were observed for epilepsy status. However, GSEA revealed significant positive enrichment for genes involved in the extracellular matrix structure (ECM; FDR = 0.0072) and collagen formation (FDR = 0.017), which was reflected in a major PPI network cluster. This preliminary study highlights the potential role of RBFOX1 in the epileptic baboon, a protein involved in transcriptomic regulation of multiple epilepsy candidate genes in humans and itself previously implicated in human epilepsy, both focal and generalized. Moreover, protein-damaging variants from across the genome exhibit a pattern of association that links collagen-containing ECM to epilepsy risk. These findings suggest a shared genetic etiology between baboon and human forms of GGE and lay the foundation for follow-up research.

BOLD fMRI of visual and somatosensory-motor stimulations in baboons.

Baboon, with its large brain size and extensive cortical folding compared to other non-human primates, serves as a good model for neuroscience research. This study reports the implementation of a baboon model for blood oxygenation level-dependent (BOLD) fMRI studies (1.5 x 1.5 x 4 mm resolution) on a clinical 3T-MRI scanner. BOLD fMRI responses to hypercapnic (5% CO(2)) challenge, 10 Hz flicker visual, and vibrotactile somatosensory-motor stimulations were investigated in baboons anesthetized sequentially with isoflurane and ketamine. Hypercapnia evoked robust BOLD increases. Paralysis was determined to be necessary to achieve reproducible functional activations within and between subjects under our experimental conditions. With optimized anesthetic doses (0.8-1.0% isoflurane or 6-8 mg/kg/h ketamine) and adequate paralysis (vecuronium, 0.2 mg/kg), robust activations were detected in the visual (V), primary (S1) and secondary (S2) somatosensory, primary motor (M cortices), supplementary motor area (SMA), lateral geniculate nucleus (LGN) and thalamus (Th). Data were tabulated for 11 trials under isoflurane and 10 trials under ketamine on 5 baboons. S1, S2, M, and V activations were detected in essentially all trials (90-100% of the time, except 82% for S2 under isoflurane and 70% for M under ketamine). LGN activations were detected 64-70% of the time under both anesthetics. SMA and Th activations were detected 36-45% of the time under isoflurane and 60% of the time under ketamine. BOLD percent changes among different structures were slightly higher under ketamine than isoflurane (0.75% versus 0.58% averaging all structures), but none was statistically different (P>0.05). This baboon model offers an opportunity to non-invasively image brain functions and dysfunctions in large non-human primates.

Assessment of the Systems Approach for the Phytosanitary Treatment of Wood Infested With Wood-Boring Insects.

Addressing the risk from pests present in wood and wood products destined for international trade is an essential step towards minimizing the movement, introduction and establishment of invasive species. One method of managing the pest risk associated with wood commodities is the use of a systems approach that incorporates multiple independent measures applied along a production pathway. However, quantifying the reduction of risk can be difficult because the approach requires raw material infested with the pest of interest at a sufficient density to be able to quantify changes in pest abundance. We tested a systems approach for the production of sawn wood using green ash, Fraxinus pennsylvanica Marshall (Lamiales: Oleaceae), infested with emerald ash borer, Agrilus planipennis Fairmaire (Coleoptera: Buprestidae), by quantifying the change in pest density during the milling process and the precise effect of heat treatment on insects in situ. Greater than 90% of emerald ash borer were removed at the first step of the milling process (debarking) and >99% were removed before the production of green sawn wood. No insects survived kilning or heat treatment. All life stages of emerald ash borer were killed at 56°C and above. Heat, however, had no sublethal effect on emerald ash borer performance. These results show that the application of a systems approach to mitigate emerald ash borer in heat-treated, sawn wood is effective. Moreover, the model-system approach developed in this study can be a template for investigating the effect of systems approaches for other phloem-feeding insects.

Predictive models of insulin resistance derived from simple morphometric and biochemical indices related to obesity and the metabolic syndrome in baboons.

BACKGROUND: Non-human primates are valuable models for the study of insulin resistance and human obesity. In baboons, insulin sensitivity levels can be evaluated directly with the euglycemic clamp and is highly predicted by adiposity, metabolic markers of obesity and impaired glucose metabolism (i.e. percent body fat by DXA and HbA1c). However, a simple method to screen and identify obese insulin resistant baboons for inclusion in interventional studies is not available. METHODS: We studied a population of twenty baboons with the euglycemic clamp technique to characterize a population of obese nondiabetic, insulin resistant baboons, and used a multivariate linear regression analysis (adjusted for gender) to test different predictive models of insulin sensitivity (insulin-stimulated glucose uptake = Rd) using abdominal circumference and fasting plasma insulin. Alternatively, we tested in a separate baboon population (n = 159), a simpler model based on body weight and fasting plasma glucose to predict the whole-body insulin sensitivity (Rd/SSPI) derived from the clamp. RESULTS: In the first model, abdominal circumference explained 59% of total insulin mediated glucose uptake (Rd). A second model, which included fasting plasma insulin (log transformed) and abdominal circumference, explained 64% of Rd. Finally, the model using body weight and fasting plasma glucose explained 51% of Rd/SSPI. Interestingly, we found that percent body fat was directly correlated with the adipocyte insulin resistance index (r = 0.755, p < 0.0001). CONCLUSION: In baboons, simple morphometric measurements of adiposity/obesity, (i.e. abdominal circumference), plus baseline markers of glucose/lipid metabolism, (i.e. fasting plasma glucose and insulin) provide a feasible method to screen and identify overweight/obese insulin resistant baboons for inclusion in interventional studies aimed to study human obesity, insulin resistance and type 2 diabetes mellitus.

Mortality in captive baboons with seizures: a new model for SUDEP?

Because the baboon is a model of primary generalized epilepsy, we were interested in mortality of captive animals with a history of witnessed seizures. Causes of natural death were investigated in 46 seizure baboons (SZ) and 78 nonepileptic controls (CTL), all of which underwent a complete pathologic examination at the Southwest Foundation for Biomedical Research (SFBR) in San Antonio. SZ animals died at a younger age than the control baboons (p < 0.001). Almost all epileptic baboons that died suddenly without an apparent cause (SZ-UKN), had pulmonary congestion or edema without evidence of trauma, systemic illness, or heart disease, compared to nine controls (12%) (p < 0.001), most of which demonstrated evidence of a concurrent illness. Serosanguineous bronchial secretions were found in 15 SZ-UKN baboons (58%), but in only three controls (4%) (p < 0.001). Chronic multifocal fibrotic changes in myocardium were noted in only three (12%) of SZ-UKN baboons and one control baboon. Based upon these results, untreated seizures appear to reduce the life expectancy of captive baboons. Sudden unexpected death in epilepsy (SUDEP) may be a common cause of natural death in epileptic baboons.

Fetal blood sampling in baboons (Papio spp.): important procedural aspects and literature review.

BACKGROUND: The baboons (Papio cynocephalus) have similarities with human placentation and fetal development. Fetal blood sampling allows investigators to assess fetal condition at a specific point in gestation as well as transplacental transfer of medications. Unfortunately, assessing fetal status during gestation has been difficult and fetal instrumentation associated with high rate of pregnancy loss. Our objectives are to describe the technique of ultrasound guided cordocentesis (UGC) in baboons, report post-procedural outcomes, and review existing publications. METHODS: This is a procedural paper describing the technique of UGC in baboons. After confirming pregnancy and gestational age via ultrasound, animals participating in approved research protocols that required fetal assessment underwent UGC. RESULTS: We successfully performed UGC in four animals (five samples) using this technique. Animals were sampled in the second and third trimesters with fetal blood sampling achieved by sampling a free cord loop, placental cord insertion site or the intrahepatic umbilical vein. All procedures were without complication and these animals delivered at term. CONCLUSIONS: Ultrasound guided fetal umbilical cord venipuncture is a useful and safe technique to sample the fetal circulation with minimal risk to the fetus or mother. We believe this technique could be used for repeated fetal venous blood sampling in the baboons.

Kinetics of growth and ethanol production on different carbon substrates using genetically engineered xylose-fermenting yeast.

Saccharomyces cerevisiae 424A (LNH-ST) strain was used for fermentation of glucose and xylose. Growth kinetics and ethanol productivity were calculated for batch fermentation on media containing different combinations of glucose and xylose to give a final sugar concentration of 20+/-0.8 g/L. Growth rates obtained in pure xylose-based medium were less than those for media containing pure glucose and glucose-xylose mixtures. A maximum specific growth rate micro(max) of 0.291 h(-1) was obtained in YPD medium containing 20 g/L glucose as compared to 0.206 h(-1) in YPX medium containing 20 g/L xylose. In media containing combinations of glucose and xylose, glucose was exhausted first followed by xylose. Ethanol production on pure xylose entered log phase during the 12-24h period as compared to the 4-10h for pure glucose based medium using 2% inoculum. When glucose was added to fermentation flasks which had been initiated on a pure xylose-based medium, the rate of xylose usage was reduced indicating cosubstrate inhibition of xylose consumption by glucose.

Trisomy of chromosome 18 in the baboon (Papio hamadryas anubis).

Trisomy 18 is usually a lethal chromosomal abnormality and is the second most common autosomal trisomy in humans, with an incidence of 1:8000 live births. It is commonly associated with abnormalities of the lower and upper extremities, having the frequency of 95% and 65%, respectively. A newborn female olive baboon (Papio hamadryas anubis) was diagnosed with intrauterine growth retardation and severe arthrogryposis-like congenital joint deformities. Cytogenetic analysis including G-banding and fluorescence in situ hybridization (FISH) revealed that the congenital abnormalities were associated with chromosomal mosaicism for trisomy 18. Genetic analysis with microsatellites from chromosome 18 confirmed the maternal origin of the extra chromosome 18. This is the first report of trisomy 18 in the baboon, which may be a promising animal model of human disease.

Significance of dissolved methane in effluents of anaerobically treated low strength wastewater and potential for recovery as an energy product: A review.

The need for energy efficient Domestic Wastewater (DWW) treatment is increasing annually with population growth and expanding global energy demand. Anaerobic treatment of low strength DWW produces methane which can be used to as an energy product. Temperature sensitivity, low removal efficiencies (Chemical Oxygen Demand (COD), Suspended Solids (SS), and Nutrients), alkalinity demand, and potential greenhouse gas (GHG) emissions have limited its application to warmer climates. Although well designed anaerobic Membrane Bioreactors (AnMBRs) are able to effectively treat DWW at psychrophilic temperatures (10-30 °C), lower temperatures increase methane solubility leading to increased energy losses in the form of dissolved methane in the effluent. Estimates of dissolved methane losses are typically based on concentrations calculated using Henry's Law but advection limitations can lead to supersaturation of methane between 1.34 and 6.9 times equilibrium concentrations and 11-100% of generated methane being lost in the effluent. In well mixed systems such as AnMBRs which use biogas sparging to control membrane fouling, actual concentrations approach equilibrium values. Non-porous membranes have been used to recover up to 92.6% of dissolved methane and well suited for degassing effluents of Upflow Anaerobic Sludge Blanket (UASB) reactors which have considerable solids and organic contents and can cause pore wetting and clogging in microporous membrane modules. Microporous membranes can recover up to 98.9% of dissolved methane in AnMBR effluents which have low COD and SS concentrations. Sequential Down-flow Hanging Sponge (DHS) reactors have been used to recover between 57 and 88% of dissolved methane from Upflow Anaerobic Sludge Blanket (UASB) reactor effluent at concentrations of greater than 30% and oxidize the rest for a 99% removal of total dissolved methane. They can also remove 90% of suspended solids and COD in UASB effluents and produce a high quality effluent. In situ degassing can increase process stability, COD removal, biomass retention, and headspace methane concentrations. A model for estimating energy consumption associated with membrane-based dissolved methane recovery predicts that recovered dissolved and headspace methane may provide all the energy required for operation of an anaerobic system treating DWW at psychrophilic temperatures.

Modeling the effective connectivity of the visual network in healthy and photosensitive, epileptic baboons.

The baboon provides a model of photosensitive, generalized epilepsy. This study compares cerebral blood flow responses during intermittent light stimulation (ILS) between photosensitive (PS) and healthy control (CTL) baboons using H 2 (15) O-PET. We examined effective connectivity associated with visual stimulation in both groups using structural equation modeling (SEM). Eight PS and six CTL baboons, matched for age, gender and weight, were classified on the basis of scalp EEG findings performed during the neuroimaging studies. Five H 2 (15) O-PET studies were acquired alternating between resting and activation (ILS at 25 Hz) scans. PET images were acquired in 3D mode and co-registered with MRI. SEM demonstrated differences in neural connectivity between PS and CTL groups during ILS that were not previously identified using traditional activation analyses. First-level pathways consisted of similar posterior-to-anterior projections in both groups. While second-level pathways were mainly lateralized to the left hemisphere in the CTL group, they consisted of bilateral anterior-to-posterior projections in the PS baboons. Third- and fourth-level pathways were only evident in PS baboons. This is the first functional neuroimaging study used to model the photoparoxysmal response (PPR) using a primate model of photosensitive, generalized epilepsy. Evidence of increased interhemispheric connectivity and bidirectional feedback loops in the PS baboons represents electrophysiological synchronization associated with the generation of epileptic discharges. PS baboons demonstrated decreased model stability compared to controls, which may be attributed to greater variability in the driving response or PPRs, or to the influence of regions not included in the model.

Clinical and EEG phenotypes of epilepsy in the baboon (Papio hamadryas spp.).

Spontaneous seizures have been reported in several baboon subspecies housed at the Southwest Foundation for Biomedical Research (SFBR), including Papio hamadryas anubis as well as cynocephalus/anubis and other hybrids. This study classified clinical and electroencephalographic (EEG) phenotypes in these subspecies based upon interictal and ictal findings, as well as photosensitivity, by scalp EEG. One hundred baboons underwent 1-h EEG studies with photic stimulation (PS), 49 with previously witnessed seizures and 51 without. The animals were classified according to these electroclinical phenotypes: presence or absence of interictal epileptic discharges (IEDs), seizures and photoparoxysmal or photoconvulsive responses. Effects of age, gender, and species on EEG phenotypes were also examined. Six discrete electroclinical phenotypes were identified. Generalized IEDs of 2-3, 4-6, and/or 6-7Hz were identified in 67 baboons. Epileptic seizures were recorded in 40 animals, including myoclonic and generalized tonic-clonic seizures. Thirty-three animals were photosensitive. Although the prevalence of IEDs and seizures were similar in seizure and asymptomatic animals, photosensitivity was more prevalent in the seizure animals (p=0.001). P.h. anubis/cynocephalus hybrids were more likely to be photosensitive than P.h. anubis (p=0.004). The reliable characterization of distinct epileptic phenotypes in this pedigreed colony is critical to the success of future genetic analyses to identify genetic factors underlying their epilepsy.

Changing Prevalence of Diabetes for Texas Nursing Home Residents, 1999-2009.

This article examines change in the composition of the Texas nursing home population between 1990 and 2009 in relation to the changing prevalence of diabetes. Data from the federal Minimum Data Set for Texas for 1999 and 2009 were analyzed for change in proportion of age groups by the Two-Sample Proportion Test. Change by gender within age groups while controlling for race/ethnicity was analyzed by the Cochran-Mantel-Haenszel test. The percentage of nursing home residents aged 50 to 64 years increased from 8% in 1999 to 12% in 2009, and the change was statistically significant for each race/ethnic group and both genders. The percentage reporting diabetes increased among all groups with more pronounced change for minorities. These results point to a need for closer examination of the impacts of changing diabetes prevalence on nursing homes.

Lethal toxicity, severe endothelial injury, and a threshold effect with high doses of an adenoviral vector in baboons.

The effects of intravenous administration of a first-generation adenoviral vector expressing beta-galactosidase were compared in two baboons receiving a high dose or lower dose of vector, 1.2 x 10(13) or 1.2 x 10(12) particles/kg, respectively. The high-dose baboon developed acute symptoms, decreased platelet counts, and increased liver enzymes, and became moribund at 48 hr after injection, while the lower-dose baboon developed no symptoms. Expression of the beta-galactosidase transgene was prominent in liver, spleen, and endothelium of the arterial vasculature in the high-dose baboon, but was much more limited and spared the endothelium in the lower-dose baboon. Injury to the vascular endothelium was the most prominent abnormality in the high-dose baboon. Extensive histological studies provide a detailed picture of the pathology associated with a lethal dose of first-generation adenoviral vector in a primate.