A Cox Nomogram for Assessing Recurrence Free Survival in Hepatocellular Carcinoma Following Surgical Resection Using Dynamic Contrast-Enhanced MRI Radiomics.

BACKGROUND: The prognosis of hepatocellular carcinoma (HCC) is difficult to predict and carries high mortality. This study utilized radiomic techniques with clinical examinations to assess recurrence in HCC. PURPOSE: To develop a Cox nomogram to assess the risk of postoperative recurrence in HCC using radiomic features of three volumes of interest (VOIs) in preoperative dynamic contrast-enhanced MRI (DCE-MRI), along with clinical findings. STUDY TYPE: Retrospective. SUBJECTS: 249 patients with pathologically proven HCCs undergoing surgical resection at three institutions were selected. FIELD STRENGTH/SEQUENCE: Fat saturated T2-weighted, Fat saturated T1-weighted, and DCE-MRI performed at 1.5 T and 3.0 T. ASSESSMENT: Three VOIs were generated; the tumor VOI corresponds to the area from the tumor core to the outer perimeter of the tumor, the tumor +10 mm VOI represents the area from the tumor perimeter to 10 mm distal to the tumor in all directions, finally, the background liver parenchyma VOI represents the hepatic tissue outside the tumor. Three models were generated. The total radiomic model combined information from the three listed VOI's above. The clinical-radiological model combines physical examination findings with imaging characteristics such as tumor size, margin features, and metastasis. The combined radiomic model includes features from both models listed above and showed the highest reliability for assessing 24-month survival for HCC. STATISTICAL TESTS: The least absolute shrinkage and selection operator (LASSO) Cox regression, univariable, and multivariable Cox regression, Kmeans clustering, and Kaplan-Meier analysis. The discrimination performance of each model was quantified by the C-index. A P value <0.05 was considered statistically significant. RESULTS: The combined radiomic model, which included features from the radiomic VOI's and clinical imaging provided the highest performance (C-index: training cohort = 0.893, test cohort = 0.851, external cohort = 0.797) in assessing the survival of HCC. CONCLUSION: The combined radiomic model provides superior ability to discern the possibility of recurrence-free survival in HCC over the total radiomic and the clinical-radiological models. EVIDENCE LEVEL: 4. TECHNICAL EFFICACY: Stage 2.

Ligustrazine Attenuates Liver Fibrosis by Targeting miR-145 Mediated Transforming Growth Factor-ß/Smad Signaling in an Animal Model of Biliary Atresia.

To investigate therapeutic target for ligustrazine during liver fibrosis in an ethanol-induced biliary atresia rat model and transforming growth factor-ß (TGF-ß) induced hepatic stellate cell activation cell model, and the underlying mechanism, a total of 30 rats were randomly assigned into five groups (n = 6 per group): control, sham, ethanol-induced biliary atresia model, model plus pirfenidone, and model plus ligustrazine groups. The liver changes were assessed using H&E and Masson staining and transmission electron microscopy. Expression of miR-145 and mRNA and protein levels of TGF-ß/smads pathway-related proteins were detected. HSC-T6 cells were infected with LV-miR or rLV-miR-145 in the presence or absence of SMAD3 inhibitor SIS3 and treated with 2.5 ng/ml TGF-ß1 and then with ligustrazine. Collected cells were subjected to detect the expression of miR-145 and mRNA and protein expression levels of TGF-ß/smads pathway-related proteins. Ligustrazine rescued liver fibrogenesis and pathology for ethanol-caused bile duct injury, revealed by decreased α-smooth muscle actin and collagen I expression and liver tissue and cell morphology integrity. Further experiments showed that ligustrazine inhibited intrinsic and phosphorylated Smad2/3 protein expression and modification. Similar results were obtained in cells. In addition, ligustrazine altered miR-145 expression in both animal and cell models. Lentivirus mediated miR-145 overexpression and knockdown recombinant virus showed that miR-145 enhanced the TGF-ß/Smad pathway, which led to hepatic stellate cell activation, and ligustrazine blocked this activation. This work validated that ligustrazine-regulated miR-145 mediated TGF-ß/Smad signaling to inhibit the progression of liver fibrosis in a biliary atresia rat model and provided a new therapeutic strategy for liver fibrosis. SIGNIFICANCE STATEMENT: With an ethanol-induced biliary atresia rat model, ligustrazine was found to rescue liver fibrogenesis and pathology for ethanol caused bile duct injury, revealed by decreased α-smooth muscle actin and collagen I expression and liver tissue and cell morphology integrity. Furthermore, we found ligustrazine upregulated miR-145 expression and inhibited TGF-ß/SMAD signaling pathway both in vivo and in vitro. In addition, overexpression and knockdown of miR-145 confirmed that miR-145 is involved in the ligustrazine inhibition of liver fibrosis through the TGF-ß/SMAD signaling pathway.

Transcriptome, genetic editing, and microRNA divergence substantiate sympatric speciation of blind mole rat, Spalax.

Incipient sympatric speciation in blind mole rat, Spalax galili, in Israel, caused by sharp ecological divergence of abutting chalk-basalt ecologies, has been proposed previously based on mitochondrial and whole-genome nuclear DNA. Here, we present new evidence, including transcriptome, DNA editing, microRNA, and codon usage, substantiating earlier evidence for adaptive divergence in the abutting chalk and basalt populations. Genetic divergence, based on the previous and new evidence, is ongoing despite restricted gene flow between the two populations. The principal component analysis, neighbor-joining tree, and genetic structure analysis of the transcriptome clearly show the clustered divergent two mole rat populations. Gene-expression level analysis indicates that the population transcriptome divergence is displayed not only by soil divergence but also by sex. Gene ontology enrichment of the differentially expressed genes from the two abutting soil populations highlights reproductive isolation. Alternative splicing variation of the two abutting soil populations displays two distinct splicing patterns. L-shaped FST distribution indicates that the two populations have undergone divergence with gene flow. Transcriptome divergent genes highlight neurogenetics and nutrition characterizing the chalk population, and energetics, metabolism, musculature, and sensory perception characterizing the abutting basalt population. Remarkably, microRNAs also display divergence between the two populations. The GC content is significantly higher in chalk than in basalt, and stress-response genes mostly prefer nonoptimal codons. The multiple lines of evidence of ecological-genomic and genetic divergence highlight that natural selection overrules the gene flow between the two abutting populations, substantiating the sharp ecological chalk-basalt divergence driving sympatric speciation.

The draft genome of Tibetan hulless barley reveals adaptive patterns to the high stressful Tibetan Plateau.

The Tibetan hulless barley (Hordeum vulgare L. var. nudum), also called "Qingke" in Chinese and "Ne" in Tibetan, is the staple food for Tibetans and an important livestock feed in the Tibetan Plateau. The diploid nature and adaptation to diverse environments of the highland give it unique resources for genetic research and crop improvement. Here we produced a 3.89-Gb draft assembly of Tibetan hulless barley with 36,151 predicted protein-coding genes. Comparative analyses revealed the divergence times and synteny between barley and other representative Poaceae genomes. The expansion of the gene family related to stress responses was found in Tibetan hulless barley. Resequencing of 10 barley accessions uncovered high levels of genetic variation in Tibetan wild barley and genetic divergence between Tibetan and non-Tibetan barley genomes. Selective sweep analyses demonstrate adaptive correlations of genes under selection with extensive environmental variables. Our results not only construct a genomic framework for crop improvement but also provide evolutionary insights of highland adaptation of Tibetan hulless barley.

Influences of the steam sterilization on the properties of calcium phosphate porous bioceramics.

The influences of steam sterilization on the physicochemical properties of calcium phosphate (Ca-P) porous bioceramics, including ß-tricalcium phosphate (ß-TCP), biphasic calcium phosphate (BCP) and hydroxyapatite (HA) are investigated. After being steam sterilized in an autoclave (121 °C for 40 min), the porous bioceramics are dried and characterized. The steam sterilization has no obvious effects on the phase composition, thermal stability, pH value and dissolubility of ß-TCP porous bioceramic, but changes its morphology and mechanical strength. Meanwhile, the steam sterilization leads to the significant changes of the morphology, phase composition, pH value and dissolubility of BCP porous bioceramic. The increase of dissolubility and mechanical strength, the decrease of pH value of the immersed solution and partial oriented growth of crystals are also observed in HA porous bioceramic after steam sterilization. These results indicate that the steam sterilization can result in different influences on the physicochemical properties of ß-TCP, BCP and HA porous bioceramics, thus the application of the steam sterilization on the three kinds of Ca-P porous bioceramics should be considered carefully based on the above changed properties.

Osteo-immunomodulatory effects of macrophage-derived extracellular vesicles treated with biphasic calcium phosphate ceramics on bone regeneration.

Literature on osteoimmunology has demonstrated that macrophages have a great influence on biomaterial-induced bone formation. However, there are almost no reports clarifying the osteo-immunomodulatory capacity of macrophage-derived extracellular vesicles (EVs). This study comprehensively investigated the effects of EVs derived from macrophages treated with biphasic calcium phosphate (BCP) ceramics (BEVs) on vital events associated with BCP-induced bone formation such as immune response, angiogenesis, and osteogenesis. It was found that compared with EVs derived from macrophages alone (control, CEVs), BEVs preferentially promoted macrophage polarization towards a wound-healing M2 phenotype, enhanced migration, angiogenic differentiation, and tube formation of human umbilical vein endothelial cells, and induced osteogenic differentiation of mesenchymal stem cells. Analysis of 15 differentially expressed microRNAs (DEMs) related to immune, angiogenesis, and osteogenesis suggested that BEVs exhibited good immunomodulatory, pro-angiogenic, and pro-osteogenic abilities, which might be attributed to their specific miRNA cargos. These findings not only deepen our understanding of biomaterial-mediated osteoinduction, but also suggest that EVs derived from biomaterial-treated macrophages hold great promise as therapeutic agents with desired immunomodulatory capacity for bone regeneration.

Unveiling protein corona composition: predicting with resampling embedding and machine learning.

Biomaterials with surface nanostructures effectively enhance protein secretion and stimulate tissue regeneration. When nanoparticles (NPs) enter the living system, they quickly interact with proteins in the body fluid, forming the protein corona (PC). The accurate prediction of the PC composition is critical for analyzing the osteoinductivity of biomaterials and guiding the reverse design of NPs. However, achieving accurate predictions remains a significant challenge. Although several machine learning (ML) models like Random Forest (RF) have been used for PC prediction, they often fail to consider the extreme values in the abundance region of PC absorption and struggle to improve accuracy due to the imbalanced data distribution. In this study, resampling embedding was introduced to resolve the issue of imbalanced distribution in PC data. Various ML models were evaluated, and RF model was finally used for prediction, and good correlation coefficient (R2) and root-mean-square deviation (RMSE) values were obtained. Our ablation experiments demonstrated that the proposed method achieved an R2 of 0.68, indicating an improvement of approximately 10%, and an RMSE of 0.90, representing a reduction of approximately 10%. Furthermore, through the verification of label-free quantification of four NPs: hydroxyapatite (HA), titanium dioxide (TiO2), silicon dioxide (SiO2) and silver (Ag), and we achieved a prediction performance with an R2 value >0.70 using Random Oversampling. Additionally, the feature analysis revealed that the composition of the PC is most significantly influenced by the incubation plasma concentration, PDI and surface modification.

Exploring the potential mechanism of Heng-Gu-Gu-Shang-Yu-He-Ji therapy for osteoporosis based on network pharmacology and transcriptomics.

ETHNOPHARMACOLOGICAL RELEVANCE: Heng-Gu-Gu-Shang-Yu-He-Ji (Osteoking, OK) is a well-known formula for fracture therapy. In clinic, OK is effective in treating fractures while alleviating osteoporosis (OP) symptoms. However, active components of OK and the associated molecular mechanisms remain not fully elucidated. AIM OF THE STUDY: This study aims to systematically evaluate the anti-osteoporosis efficacy of OK and for the first time combine network pharmacology with high-throughput whole gene transcriptome sequencing to study its underlying mechanism. MATERIALS AND METHODS: In this study, the osteoporosis model was established by the castration of both ovaries. The level of serum bone turnover factor was detected by enzyme-linked immunosorbent assay. Micro-CT and HE staining were used to observe the changes of bone histopathology, and nano-indentation technique was used to detect the biomechanical properties of rat bone. The main active Chemical components of OK were identified using UPLC-DAD. Efficacy verification and mechanism exploration were conducted by network pharmacology, molecular docking, whole gene transcriptomics and in vivo experiments. RESULTS: In our study, OK significantly improved bone microarchitecture and bone biomechanical parameters in OVX rats, reduced osteoclast indexes such as C-telopeptide of type I collage (CTX-I) and increased Osteoprotegerin (OPG)/Receptor activator of NF-κB ligand (RANKL) levels. Mechanistically, PI3K/AKT pathway was a common pathway for genome enrichment analysis (KEGG) of both network pharmacology and RNA-seq studies. G protein-ß-like protein (GßL), Ribosomal-protein S6 kinase homolog 2 (S6K2), and Phosphoinositide 3-kinase (PI3K) appeared differentially expression in the PI3K-AKT signaling pathway. These results were also confirmed by qRT-PCR and immunohistochemistry. CONCLUSIONS: OK may be used to treat osteoporosis, at least partly by activating PI3K/AKT/mTORC1 signaling pathway.

Control and guidance: a comparative study of building and planning standards for age-friendly built environment in the UK and China.

The crux of building and planning standards for age-friendly built environment in all countries resides in the regulation of age-friendly built environment practices, yet there exist variations in the representation of content dimensions. The UK is distinguished by its discretionary approach to guidance, whereas China exhibits a highly controlled disposition. Control and guidance may appear to be antithetical, it is essential to recognize that the building and planning standards for age-friendly built environment in both countries never deviate from the legal constraints while providing guidance in achieving age-friendly environments, thus striking a delicate balance between control and guidance. The study examines the standard systems of national standards, local standards and organizational standards, as well as the three dimensions of foundation standards, generic standards and specialized standards. The analysis of building and planning standards for age-friendly built environment in the UK and China scrutinizes the disparities between control and guidance, identifying similarities and differences in the building and planning standard system and content dimensions of the two countries. This analysis serves as a valuable reference for the development of building and planning standards for age-friendly built environment in China.

Construction of Vascularized Tissue Engineered Bone with nHA-Coated BCP Bioceramics Loaded with Peripheral Blood-Derived MSC and EPC to Repair Large Segmental Femoral Bone Defect.

The regenerative repair of segmental bone defect (SBD) is an urgent problem in the field of orthopedics. Rapid induction of angiogenesis and osteoinductivity after implantation of scaffold is critical. In this study, a unique tissue engineering strategy with mixture of peripheral blood-derived mesenchymal stem cells (PBMSC) and endothelial progenitor cells (PBEPC) was applied in a 3D-printed biphasic calcium phosphate (BCP) scaffold with highly bioactive nano hydroxyapatite (nHA) coating (nHA/BCP) to construct a novel vascularized tissue engineered bone (VTEB) for rabbit femoral SBD repair. The 2D coculture of PBMSC and PBEPC showed that they could promote the osteogenic or angiogenic differentiation of the cells from each other, especially in the group of PBEPC/PBMSC = 75:25. Besides, the 3D coculture results exhibited that the nHA coating could further promote PBEPC/PBMSC adhesion, proliferation, and osteogenic and angiogenic differentiation on the BCP scaffold. In vivo experiments showed that among the four groups (BCP, BCP-PBEPC/PBMSC, nHA/BCP, and nHA/BCP-PBEPC/PBMSC), the nHA/BCP-PBEPC/PBMSC group induced the best formation of blood vessels and new bone and, thus, the good repair of SBD. It revealed the synergistic effect of nHA and PBEPC/PBMSC on the angiogenesis and osteogenesis of the BCP scaffold. Therefore, the construction of VTEB in this study could provide a possibility for the regenerative repair of SBD.

Strategies of strengthening mechanical properties in the osteoinductive calcium phosphate bioceramics.

Calcium phosphate (CaP) bioceramics are widely applied in the bone repairing field attributing to their excellent biological properties, especially osteoinductivity. However, their applications in load-bearing or segmental bone defects are severely restricted by the poor mechanical properties. It is generally considered that it is challenging to improve mechanical and biological properties of CaP bioceramics simultaneously. Up to now, various strategies have been developed to enhance mechanical strengths of CaP ceramics, the achievements in recent researches need to be urgently summarized. In this review, the effective and current means of enhancing mechanical properties of CaP ceramics were comprehensively summarized from the perspectives of fine-grain strengthening, second phase strengthening, and sintering process optimization. What's more, the further improvement of mechanical properties for CaP ceramics was prospectively proposed including heat treatment and biomimetic. Therefore, this review put forward the direction about how to compatibly improve mechanical properties of CaP ceramics, which can provide data and ideas for expanding the range of their clinical applications.

Aspect ratio-dependent dual-regulation of the tumor immune microenvironment against osteosarcoma by hydroxyapatite nanoparticles.

Accumulating studies demonstrated that hydroxyapatite nanoparticles (HANPs) showed a selective anti-tumor effect, making them a good candidate for osteosarcoma (OS) treatment. However, the capacity of HANPs with different aspect ratios to regulate tumor immune microenvironment (TIM) was scarcely reported before. To explore it, the three HANPs with aspect ratios from 1.86 to 6.25 were prepared by wet chemical method. After a 24 or 72 h-exposure of OS UMR106 cells or macrophages to the nanoparticles, the tumor cells exhibited immunogenic cell death (ICD) indicated by the increased production of calreticulin (CRT), adenosine triphosphate (ATP) and high mobility group box 1 (HMGB1), and macrophages were activated with the release of pro-inflammatory cytokines. Next, the beneficial crosstalk between tumor cells and macrophages generated in the presence of HANPs for improved anti-tumor immunity activation. In the OS-bearing cognate rat model, HANPs inhibited OS growth, which was positively correlated with CRT and HMGB1 expression, and macrophage polarization in the tumor tissues. Additionally, HANPs promoted CD8+ T cell infiltration into the tumor and systemic dendritic cell maturation. Particularly, HANPs bearing the highest aspect ratio exhibited the strongest immunomodulatory and anti-tumor function. This study suggested the potential of HANPs to be a safe and effective drug-free nanomaterial to control the TIM for OS therapy. STATEMENT OF SIGNIFICANCE: Emerging studies demonstrated that hydroxyapatite nanoparticles (HANPs) inhibited tumor cell proliferation and tumor growth. However, the underlying anti-tumor mechanism still remains unclear, and the capacity of HANPs without any other additive to regulate tumor immune microenvironment (TIM) was scarcely reported before. Herein, we demonstrated that HANPs, in an aspect ratio-dependent manner, showed the potential to delay the growth of osteosarcoma (OS) and to regulate TIM by promoting the invasion of CD8+ T cells and F4/80+ macrophages, and inducing immunogenic cell death (ICD) in tumors. This work revealed the new molecular mechanism for HANPs against OS, and suggested HANPs might be a novel ICD inducer for OS treatment.

Drug molecules bridge with small gatekeeper to co-block mesoporous silica nanoparticles for drug delivery.

In this study, a filter-like blocking system based on MSN with small gatekeeper 5- mercapto-2 nitrobenzoic acid (MNBA) has developed. The MNBA grafted nanoparticle MSN-SS-MNBA shows excellent blocking performance with negligible leakage when loaded with doxorubicin (DOX), and the release profiles illustrate stimuli-responsive property when triggered by GSH. Viability experiments indicate that MSN-SS-MNBA has obvious inhibition for both Hela cells and HCT116 cells, while showing good biocompatibility for L929 cells, which suggests that the modified MNBA has a synergistic effect on cancer cells-killing. Since the small grafted molecule MNBA cannot block the channels of MSN via self-assembly, a filter-like blocking model that the loaded drug bridged with modified MNBA to fulfill the blocking process is proposed. The novel blocking strategy provides a new possible way for pore blocking, and the small nanovalve can be used as synergistic molecule for cancer therapy.

Increased expression of NCAPG (Non-SMC condensing I complex subunit G) is associated with progression and poor prognosis of lung adenocarcinoma.

Recently, studies have shown that the up-regulation of Non-SMC Condensin I Complex Subunit G (NCAPG) in some tumors can promote tumor progression, and its high expression has a strong correlation with the poor prognosis of patients. However, there are few studies on NCAPG in lung adenocarcinoma (LUAD). Our research is to explore the role of NCAPG in LUAD and try to reveal the possible molecular mechanism. We use public databases and tissue samples from LUAD patients to verify that NCAPG is significantly up-regulated in LUAD, and the high expression of NCAPG is related to the poor prognosis of patients. Subsequently, we found that silencing NCAPG can inhibit the proliferation and invasion of LUAD cells in vitro and the growth of subcutaneous tumors in nude mice in vivo. In order to explore the possible molecular mechanism of NCAPG's function, we found out the genes co-expressed with NCAPG through the cBioportal database, and discovered that these genes were significantly enriched in the cell cycle and other pathways through DAVID analysis, which implies the importance of NCAPG in the cell cycle. Finally, we confirmed by flow cytometry that NCAPG affects the conversion of cell cycle mitosis from G1 to S. Taken together, our research results suggest that NCAPG plays a role in the progress of LUAD. Moreover, NCAPG can be used as a potential biomarker for the diagnosis of LUAD, as well as a potential therapeutic target for patients with LUAD.

Chromosome-level genome assembly of Monochamus saltuarius reveals its adaptation and interaction mechanism with pine wood nematode.

Monochamus saltuarius (Coleoptera: Cerambycidae) was reported as the vector beetle of the pine wood nematode (PWN, Bursaphelenchus xylophilus) in Japan and Europe. It was first reported to transmitted the PWN to native Pinus species in 2018 in Liaoning Province, China. However, the lack of genomic resources has limited the in-depth understanding of its interspecific relationship with PWN. Here, we obtained a chromosome-level reference genome of M. saltuarius combining Illumina, Nanopore and Hi-C sequencing technologies. We assembled the scaffolds into ten chromosomes (including an X chromosome) and obtained a 682.23 Mb chromosome-level genome with a N50 of 73.69 Mb. In total, 427.67 Mb (62.69 %) repeat sequences were identified and 14, 492 protein-coding genes were predicted, of which 93.06 % were annotated. We described the mth/mthl, P450, OBP and OR gene families associated with the vector beetle's development and resistance, as well as the host selection and adaptation, which serve as a valuable resource for understanding the host adaptation in insects during evolution. This high quality reference genome of M. saltuarius also provide new avenues for researching the mechanism of this synergistic damage between vector beetles and PWN.

Application of osteoinductive calcium phosphate ceramics in giant cell tumor of the sacrum: report of six cases.

This study aimed at evaluating the possibility and effectiveness of osteoinductive bioceramics to fill the tumor cavity following the curettage of sacral giant cell tumor (GCT). Six patients (four females and two males, 25-45 years old) underwent nerve-sparing surgery, in which the tumor was treated by denosumab, preoperative arterial embolization and extensive curettage. The remaining cavity was filled with commercial osteoinductive calcium phosphate (CaP) bioceramics, whose excellent osteoinductivity was confirmed by intramuscular implantation in beagle canine. All patients were followed by computed tomography (CT) scans postoperatively. According to the modified Neer criterion, five cases obtained Type I healing status, and one case had Type II. At the latest follow-up, no graft-related complications and local recurrence were found. The CT scan indicated a median time of healing initiation of 3 months postoperatively, and the median time for relatively complete healing was 12 months. The excellent bone regenerative ability of the ceramics was also confirmed by increased CT attenuation value, blurred boundary and cortical rim rebuilding. In conclusion, osteoinductive CaP bioceramics could be an ideal biomaterial to treat the large remaining cavity following extensive curettage of sacral GCT. However, further investigation with more cases and longer follow-up was required to confirm the final clinical effect.

A Selective Reduction of Osteosarcoma by Mitochondrial Apoptosis Using Hydroxyapatite Nanoparticles.

Background: In recent years, using hydroxyapatite nanoparticles (HANPs) for tumor therapy attracted increasing attention because HANPs were found to selectively suppress the growth of tumor cells but exhibit ignorable toxicity to normal cells. Purpose: This study aimed to investigate the capacities of HANPs with different morphologies and particle sizes against two kinds of osteosarcoma (OS) cells, human OS 143B cells and rat OS UMR106 cells. Methods: Six kinds of HANPs with different morphologies and particle sizes were prepared by wet chemical method. Then, the antitumor effect of these nanoparticles was characterized by means of in vitro cell experiments and in vivo tumor-bearing mice model. The underlying antitumor mechanism involving mitochondrial apoptosis was also investigated by analysis of intracellular calcium, expression of apoptosis-related genes, reactive oxygen species (ROS), and the endocytosis efficiency of the particles in tumor cells. Results: Both in vitro cell experiments and in vivo mice model evaluation revealed the anti-OS performance of HANPs depended on the concentration, morphology, and particle size of the nanoparticles, as well as the OS cell lines. Among the six HANPs, rod-like HANPs (R-HANPs) showed the best inhibitory activity on 143B cells, while needle-like HANPs (N-HANPs) inhibited the growth of UMR106 cells most efficiently. We further demonstrated that HANPs induced mitochondrial apoptosis by selectively raising intracellular Ca2+ and the gene expression levels of mitochondrial apoptosis-related molecules, and depolarizing mitochondrial membrane potential in tumor cells but not in MC3T3-E1, a mouse pre-osteoblast line. Additionally, the anti-OS activity of HANPs also linked with the endocytosis efficiency of the particles in the tumor cells, and their ability to drive oxidative damage and immunogenic cell death (ICD). Conclusion: The current study provides an effective strategy for OS therapy where the effectiveness was associated with the particle morphology and cell line.

Fabrication and biological evaluation of 3D-printed calcium phosphate ceramic scaffolds with distinct macroporous geometries through digital light processing technology.

Digital light processing (DLP)-based 3D printing technique holds promise in fabricating scaffolds with high precision. Here raw calcium phosphate (CaP) powders were modified by 5.5% monoalcohol ethoxylate phosphate (MAEP) to ensure high solid loading and low viscosity. The rheological tests found that photocurable slurries composed of 50 wt% modified CaP powders and 2 wt% toners were suitable for DLP printing. Based on geometric models designed by computer-aided design (CAD) system, three printed CaP ceramics with distinct macroporous structures were prepared, including simple cube, octet-truss and inverse face-centered cube (fcc), which presented the similar phase composition and microstructure, but the different macropore geometries. Inverse fcc group showed the highest porosity and compressive strength. The in vitro and in vivo biological evaluations were performed to compare the bioactivity of three printed CaP ceramics, and the traditional foamed ceramic was used as control. It suggested that all CaP ceramics exhibited good biocompatibility, as evidence by an even bone-like apatite layer formation on the surface, and the good cell proliferation and spreading. A mouse intramuscular implantation model found that all of CaP ceramics could induce ectopic bone formation, and foam group had the strongest osteoinduction, followed by inverse fcc, while cube and octet-truss had the weakest one. It indicated that macropore geometry was of great importance to affect the osteoinductivity of scaffolds, and spherical, concave macropores facilitated osteogenesis. These findings provide a strategy to design and fabricate high-performance orthopedic grafts with proper pore geometry and desired biological performance via DLP-based 3D printing technique.

Surface Stability and Morphology of Calcium Phosphate Tuned by pH Values and Lactic Acid Additives: Theoretical and Experimental Study.

The ubiquitous mineralization of calcium phosphate (CaP) facilitates biological organisms to produce hierarchically structured minerals. The coordination number and strength of Ca2+ ions with phosphate species, oxygen-containing additives, and solvent molecules played a crucial role in tuning nucleation processes and the surface stability of CaP under the simulated body fluid (SBF) or aqueous solutions upon the addition of oligomeric lactic acid (LACn, n = 1, 8) and changing pH values. As revealed by ab initio molecular dynamics (AIMD), density functional theory (DFT), and molecular dynamics (MD) simulations as well as high-throughput experimentation (HTE), the binding of LAC molecules with Ca2+ ions and phosphate species could stabilize both the pre-nucleation clusters and brushite (DCPD, CaHPO4·2H2O) surface through intermolecular electrostatic and hydrogen bonding interactions. When the concentration of Ca2+ ions ([Ca2+]) is very low, the amount of the formed precipitation decreased with the addition of LAC based on UV-vis spectroscopic analysis due to the reduced chance for the LAC capped Ca2+ ions to coordinate with phosphates and the increased solubility in the acid solution. With the increasing [Ca2+] concentration, the kinetically stable DCPD precipitation was obtained with high Ca2+ coordination number and low surface energy. Morphologies of DCPD precipitation are in plate, needle, or rod, depending on the initial pH values that were tuned by adding NH3·H2O, HCl, or CH3COOH. The prepared samples at pH ≈ 7.4 with different Ca/P ratios exhibited negative zeta potential values, which were correlated with the surface electrostatic potential distributions and potential biological applications.

Optimal regenerative repair of large segmental bone defect in a goat model with osteoinductive calcium phosphate bioceramic implants.

So far, how to achieve the optimal regenerative repair of large load-bearing bone defects using artificial bone grafts is a huge challenge in clinic. In this study, a strategy of combining osteoinductive biphasic calcium phosphate (BCP) bioceramic scaffolds with intramedullary nail fixation for creating stable osteogenic microenvironment was applied to repair large segmental bone defects (3.0 cm in length) in goat femur model. The material characterization results showed that the BCP scaffold had the initial compressive strength of over 2.0 MPa, and total porosity of 84%. The cell culture experiments demonstrated that the scaffold had the excellent ability to promote the proliferation and osteogenic differentiation of rat bone marrow-derived mesenchymal stem cells (BMSCs). The in vivo results showed that the intramedullary nail fixation maintained the initial stability and structural integrity of the implants at early stage, promoting the osteogenic process both guided and induced by the BCP scaffolds. At 9 months postoperatively, good integration between the implants and host bone was observed, and a large amount of newborn bones formed, accompanying with the degradation of the material. At 18 months postoperatively, almost the complete new bone substitution in the defect area was achieved. The maximum bending strength of the repaired bone defects reached to the 100% of normal femur at 18 months post-surgery. Our results demonstrated the good potential of osteoinductive BCP bioceramics in the regenerative repair of large load-bearing bone defects. The current study could provide an effective method to treat the clinical large segmental bone defects.