Comparative Study on Proton Conductivity and Mechanism Analysis of Two Imidazole Modified Imine-Based Covalent Organic Frameworks.

This work elucidates the potential impact of intramolecular H-bonds within the pore walls of covalent organic frameworks (COFs) on proton conductivity. Employing DaTta and TaTta as representative hosts, it was observed that their innate proton conductivities (σ) are both unsatisfactory and σ(DaTta)<σ(TaTta). Intriguingly, the performance of both imidazole-loaded products, Im@DaTta and Im@TaTta is greatly improved, and the σ of Im@DaTta (0.91×10-2  S cm-1 ) even surpasses that of Im@TaTta (3.73×10-3  S cm-1 ) under 100 °C and 98 % relative humidity. The structural analysis, gas adsorption tests, and activation energy calculations forecast the influence of imidazole on the H-bonded system within the framework, leading to observed changes in proton conductivity. It is hypothesized that intramolecular H-bonds within the COF framework impede efficient proton transmission. Nevertheless, the inclusion of an imidazole group disrupts these intramolecular bonds, leading to the formation of an abundance of intermolecular H-bonds within the pore channels, thus contributing to a dramatic increase in proton conductivity. The related calculation of Density Functional Theory (DFT) provides further evidence for this inference.

Icing on the Cake: Imidazole-Anchored Strategy To Enhance the Proton Conductivity of Two Isostructural Ce(IV)/Hf(IV) Metal-Organic Frameworks.

In the field of proton conduction, the acquisition of crystalline metal-organic frameworks (MOFs) with high stability and ultrahigh proton conductivity has been of great research value and is worth continuous exploration. Here, we greenly synthesized a three-dimensional porous MOF (MOF-801-Ce) by using [(NH4)2Ce(NO3)6 and fumaric acid as starting materials and solvothermally synthesized Hf-UiO-66-NO2 by using HfCl4 and 2-nitroterephthalic acid as starting materials. A series of measurements have shown that both MOFs exhibit good water stability, acid-base stability, and thermal stability and demonstrate outstanding proton conductivity. At 100 °C and 98% relative humidity (RH), the proton conductivities (σ) could be 2.59 × 10-3 S·cm-1 for MOF-801-Ce and 0.89 × 10-3 S·cm-1 for Hf-UiO-66-NO2. To pursue higher proton conductivity, we further adopted the evaporation approach to encapsulate imidazole molecules in the pores of the two compounds, achieving the imidazole-encapsulated MOFs, Im@MOF-801-Ce and Im@Hf-UiO-66-NO2. As expected, their σ values were significantly boosted by almost an order of magnitude up to 10-2 S·cm-1. Finally, their proton-conductive mechanisms were explored in light of the structural information, gas adsorption/desorption, and other tests. The outstanding structural stability of these MOFs and their durability of the proton conduction capability manifested that they have great promise in electrochemical fields.

Two Dual-Function Zr/Hf-MOFs as High-Performance Proton Conductors and Amines Impedance Sensors.

In the field of sensing, finding high-performance amine molecular sensors has always been a challenging topic. Here, two highly stable 3D MOFs DUT-67(Hf) and DUT-67(Zr) with large specific surface areas and hierarchical pore structures were conveniently synthesized by solvothermal reaction of ZrCl4/HfCl4 with a simple organic ligand, 2,5-thiophene dicarboxylic acid (H2TDC) according to literature approach. By analyzing TGA data, it was found that the two MOFs have defects (unsaturated metal sites) that can interact with substrates (H2O and volatile amine gas), which is conducive to proton transfer and amine compound identification. Further experiments showed that at 100 °C and 98% relative humidity (RH), the optimized proton conductivities of DUT-67(Zr) and DUT-67(Hf) can reach the high values of 2.98 × 10-3 and 3.86 × 10-3 S cm-1, respectively. Moreover, the room temperature sensing characteristics of MOFs' to amine gases were evaluated at 68, 85 and 98% RHs, respectively. Impressively, the prepared MOFs-based sensors have the desired stability and higher sensitivity to amines. Under 68% RH, the detection limits of DUT-67(Zr) or DUT-67(Hf) for volatile amine gases were 0.5 (methylamine), 0.5 (dimethylamine) and 1 ppm (trimethylamine), and 0.5 (methylamine), 0.5 (dimethylamine) and 0.5 ppm (trimethylamine), respectively. As far as we know, this is the best performance of ammonia room temperature sensors in the past proton-conductive MOF sensors.

High Protonic Conductivity of Three Highly Stable Nanoscale Hafnium(IV) Metal-Organic Frameworks and Their Imidazole-Loaded Products.

Attracted by the exceptional structural rigidity and inherent porous structures of the Hf-based metal-organic frameworks (MOFs), we adopted a rapid synthesis approach to preparing three nanoscale MOFs, Hf-UiO-66 (1), Hf-UiO-66-(OH)2 (2), and Hf-UiO-66-NH2 (3), and systematically explored the water-assisted proton conductivities of the original ones and the post-modified products. Interestingly, the proton conductivities (σ) of all three MOFs exhibit significant temperature and humidity dependence. At 98% RH and 100 °C, their optimal σ values can reach up to 10-3 S·cm-1. Consequently, imidazole units are loaded into 1-3 to obtain related MOFs, Im@1, Im@2, and Im@3, and the σ values of the imidazole-loaded products are boosted to 10-2 S·cm-1. Note that these modifications not only do not change the frameworks of the pristine MOFs but also do not affect their high chemical and water stability. The proton-conductive mechanisms of these MOFs before and after modification have been thoroughly discussed based on structural analyses, N2 and H2O vapor adsorptions, and activation energy values. The excellent structural stability as well as the durability and stability of their proton conduction ability indicate that these MOFs can be used in the field of fuel cells and so on.

Comparative Studies on the Proton Conductivities of Hafnium-Based Metal-Organic Frameworks and Related Chitosan or Nafion Composite Membranes.

Hafnium (Hf)-based UiO-66 series metal-organic frameworks (MOFs) have been widely studied on gas storage, gas separation, reduction reaction, and other aspects since they were first prepared in 2012, but there are few studies on proton conductivity. In this work, one Hf-based MOF, Hf-UiO-66-fum showing UiO-66 structure, also known as MOF-801-Hf, was synthesized at room temperature using cheap fumaric acid as the bridging ligand, and then imidazole units were successfully introduced into MOF-801-Hf to obatin a doped product, Im@MOF-801-Hf. Note that both MOF-801-Hf and Im@MOF-801-Hf demonstrate excellent thermal, water, and acid-base stabilities. Expectedly, the maximum proton conductivity (σ) of Im@MOF-801-Hf (1.46 × 10-2 S·cm-1) is nearly 4 times greater than that of MOF-801-Hf (3.98 × 10-3 S·cm-1) under 100 °C and 98% relative humidity (RH). To explore their possible practical application value, we doped them into chitosan (CS) or Nafion membranes as fillers, namely, CS/MOF-801-Hf-X, CS/Im@MOF-801-Hf-Y, and Nafion/MOF-801-Hf-Z (X, Y, and Z are the doping percentages of MOF in the membrane, respectively). Intriguingly, it was found that CS/MOF-801-Hf-6 and CS/Im@MOF-801-Hf-4 indicated the highest σ values of 1.73 × 10-2 and 2.14 × 10-2 S·cm-1, respectively, under 100 °C and 98% RH and Nafion/MOF-801-Hf-9 also revealed a high σ value of 4.87 × 10-2 S·cm-1 under 80 °C and 98% RH, which showed varying degrees of enhancement compared to the original MOFs or pure CS and Nafion membranes. Our study illustrates that these Hf-based MOFs and related composite membranes offer great potential in electrochemical fields.

Two Highly Stable Proton Conductive Cobalt(II)-Organic Frameworks as Impedance Sensors for Formic Acid.

Metal-organic frameworks (MOFs) have been extensively explored as advanced chemical sensors in recent years. However, there are few studies on MOFs as acidic gas sensors, especially proton conductive MOFs. In this work, two new proton-conducting 3D MOFs, {[Co3 (p-CPhHIDC)2 (4,4'-bipy)(H2 O)]⋅2 H2 O}n (1) (p-CPhH4 IDC=2-(4-carboxylphenyl)-1 H-imidazole-4,5-dicarboxylic acid; 4,4'-bipy=4,4'-bipyridine) and {[Co3 (p-CPhHIDC)2 (bpe)(H2 O)]⋅3 H2 O}n (2) (bpe=trans-1,2-bis(4-pyridyl)ethylene) have been solvothermally prepared and investigated their formic acid sensing properties. Both MOFs 1 and 2 show temperature- and humidity-dependent proton conductive properties and exhibit optimized proton conductivities of 1.04×10-3 and 7.02×10-4  S cm at 98 % relative humidity (RH) and 100 °C, respectively. The large number of uncoordinated carboxylic acid sites, free and coordination water molecules, and hydrogen-bonding networks inside the frameworks are favorable to the proton transfer. By measuring the impedance values after exposure to formic acid vapor at 98 % or 68 % RH and 25 °C, both MOFs indicate reproducibly high sensitivity to the analyte. The detection limit of formic acid vapor is as low as 35 ppm for 1 and 70 ppm for 2. Meanwhile, both MOFs also show commendable selectivity towards formic acid among interfering solutions. The proton conducting and formic acid sensing mechanisms have been suggested according to the structural analysis, Ea calculations, N2 and water vapor absorptions, PXRD and SEM measurements. This work will open a new avenue for proton-conductive MOF-based impedance sensors and promote the potential application of these MOFs for indirectly monitoring the concentrations of formic acid vapors.

Remarkable water-mediated proton conductivity of two porous zirconium(IV)/hafnium(IV) metal-organic frameworks bearing porphyrinlcarboxylate ligands.

Obtaining crystalline materials with high structural stability as well as super proton conductivity is a challenging task in the field of energy and material chemistry. Therefore, two highly stable metal-organic frameworks (MOFs) with macro-ring structures and carboxylate groups, Zr-TCPP (1) and Hf-TCPP (2) assembled from low-toxicity as well as highly coordination-capable Zr(IV)/Hf(IV) cations and the multifunctional linkage, meso-tetra(4-carboxyphenyl)porphine (TCPP) have attracted our strong interest. Note that TCPP as a large-size rigid ligand with high symmetry and multiple coordination sites contributes to the formation of the two stable MOFs. Moreover, the pores with large sizes in the two MOFs favor the entry of more guest water molecules and thus result in high H2O-assisted proton conductivity. First, their distinguished structural stabilities covering water, thermal and chemical stabilities were verified by various determination approaches. Second, the dependence of the proton conductivity of the two MOFs on temperature and relative humidity (RH) is explored in depth. Impressively, MOFs 1 and 2 demonstrated the optimal proton conductivities of 4.5 × 10-4 and 0.78 × 10-3 S·cm-1 at 100 °C/98 % RH, respectively. Logically, based on the structural information, gas adsorption/desorption features, and activation energy values, their proton conduction mechanism was deduced and highlighted.

[Analysis of rational clinical uses of traditional Chinese medicine injections and factors influencing adverse drug reactions].

OBJECTIVE: To rationalize the clinical use and safety are some of the key issues in the surveillance of traditional Chinese medicine injections (TCMIs). METHOD: In this 2011 study, 240 medical records of patients who had been discharged following treatment with TCMIs between 1 and 12 month previously were randomly selected from hospital records. Consistency between clinical use and the description of TCMIs was evaluated. Research on drug use and adverse drug reactions/events using logistic regression analysis was carried out. RESULT: There was poor consistency between clinical use and best practice advised in manuals on TCMIs. Over-dosage and overly concentrated administration of TCMIs occurred, with the outcome of modifying properties of the blood. Logistic regression analysis showed that, drug concentration was a valid predictor for both adverse drug reactions/events and benefits associated with TCMIs. CONCLUSION: Surveillance of rational clinical use and safety of TCMIs finds that clinical use should be consistent with technical drug manual specifications, and drug use should draw on multi-layered logistic regression analysis research to help avoid adverse drug reactions/events.

Ultrahigh Proton Conductivities of Postmodified Hf(IV) Metal-Organic Frameworks and Related Chitosan-Based Composite Membranes.

Recently, researchers have focused on preparing and studying proton exchange membranes. Metal-organic frameworks (MOFs) are candidates for composite membrane fillers due to their high crystallinity and structural characteristics, and Hf-based MOFs have attracted our attention with their high porosity and high stability. Therefore, in this study, Hf-based MOFs were doped into a cost-effective chitosan matrix as fillers to fabricate composite films having excellent proton conductivity (σ). First, the nanoscale MOFs Hf-UiO-66-(OH)2 (1) and Hf-UiO-66-NH2 (2) were chemically modified by a ligand design strategy to obtain SA-1 and CBD-2 bearing free -COOH units. The proton conductivities of SA-1 and CBD-2 under optimal test conditions reached 1.23 × 10-2 and 0.71 × 10-2 S cm-1. After that, we prepared composite membranes CS/SA-1 and CS/CBD-2 by the casting method; tests revealed that the introduction of MOFs improved the stabilities and σ values of the membranes, and their best σ could reach above 10-2 S cm-1 under 100 °C/98% RH. Further structural characterization and activation energy calculation revealed the conductive mechanism of the composite films. This investigation not only proposes a novel chemical modification method for optimizing the σ of MOFs but also promotes the development of MOF-doped composite membranes and provides a basis for future applications of MOFs in fuel cells.

Metal@COFs Possess High Proton Conductivity with Mixed Conducting Mechanisms.

The inherent porous structures and aligned functional units inside the skeleton of covalent organic frameworks (COFs) provide an extraordinary promise for post-modification and deservedly expand their application in the field of proton conduction. Herein, we tactfully introduced copper ions into a two-dimensional COF (TpTta) furnished with ample N,O-chelating sites by a post-modification strategy to achieve two copper(II)-modified products, namely, CuCl2@TpTta-3 and CuCl2@TpTta-10. Inspiringly, the two modified COFs demonstrated the higher conductivities of 1.77 × 10-3 and 8.81 × 10-3 S cm-1 under 100 °C and 98% relative humidity, respectively, among the previously reported COFs with higher σ values. In comparison to the pristine COFs, the σ values of CuCl2@TpTta-3 and CuCl2@TpTta-10 are boosted by 2 orders of magnitude. On the basis of structural analyses, nitrogen and water vapor adsorption tests, and proton conduction mechanism analysis, we deeply analyzed the reason why the conductivity of the modified COFs was significantly increased. To the best of our knowledge, it is the first time to employ the CuCl2-modified strategy to boost the conductivity of COFs, which offers a wise idea for the fabrication of highly conductive materials in the field of fuel cells.

Proton-Conductive 3D LnIII Metal-Organic Frameworks for Formic Acid Impedance Sensing.

Metal-organic frameworks (MOFs) as new classes of proton-conducting materials have been highlighted in recent years. Nevertheless, the exploration of proton-conducting MOFs as formic acid sensors is extremely lacking. Herein, we prepared two highly stable 3D isostructural lanthanide(III) MOFs, {(M(µ3 -HPhIDC)(µ2 -C2 O4 )0.5 (H2 O))⋅2 H2 O}n (M=Tb (ZZU-1); Eu (ZZU-2)) (H3 PhIDC=2-phenyl-1H-imidazole-4,5-dicarboxylic acid), in which the coordinated and uncoordinated water molecules and uncoordinated imidazole N atoms play decisive roles for the high-performance proton conduction and recognition ability for formic acid. Both ZZU-1 and ZZU-2 show temperature- and humidity-dependent proton-conducting characteristics with high conductivities of 8.95×10-4 and 4.63×10-4  S cm-1 at 98 % RH and 100 °C, respectively. Importantly, the impedance values of the two MOF-based sensors decrease upon exposure to formic acid vapor generated from formic aqueous solutions at 25 °C with good reproducibility. By comparing the changes of impedance values, we can indirectly determine the concentration of HCOOH in aqueous solution. The results showed that the lowest detectable concentrations of formic acid aqueous solutions are 1.2×10-2  mol L-1 by ZZU-1 and 2.0×10-2  mol L-1 by ZZU-2. Furthermore, the two sensors can distinguish formic acid vapor from interfering vapors including MeOH, N-hexane, benzene, toluene, EtOH, acetone, acetic acid and butane. Our research provides a new platform of proton-conductive MOFs-based sensors for detecting formic acid.