Label-free cell phenotypic profiling of histamine H4R receptor and discovery of non-competitive H4R antagonist from natural products.

Histamine 4 receptor (H4R), the most recently identified subtype of histamine receptor, primarily induces inflammatory reactions upon activation. Several H4R antagonists have been developed for the treatment of inflammatory bowel disease (IBD) and atopic dermatitis (AD), but their use has been limited by adverse side effects, such as a short half-life and toxicity. Natural products, as an important source of anti-inflammatory agents, offer minimal side effects and reduced toxicity. This work aimed to identify novel H4R antagonists from natural products. An H4R target-pathway model deconvoluted downstream Gi and MAPK signaling pathways was established utilizing cellular label-free integrative pharmacology (CLIP), on which 148 natural products were screened. Cryptotanshinone was identified as selective H4R antagonist, with an IC50 value of 11.68 ± 1.30 µM, which was verified with Fluorescence Imaging Plate Reader (FLIPR) and Cellular Thermal Shift (CTS) assays. The kinetic binding profile revealed the noncompetitive antagonistic property of cryptotanshinone. Two allosteric binding sites of H4R were predicted using SiteMap, Fpocket and CavityPlus. Subsequent molecular docking and dynamics simulation indicated that cryptotanshinone interacts with H4R at a pocket formed by the outward interfaces between TM3/4/5, potentially representing a new allosteric binding site for H4R. Overall, this study introduced cryptotanshinone as a novel H4R antagonist, offering promise as a new hit for drug design of H4R antagonist. Additionally, this study provided a novel screening model for the discovery of H4R antagonists.

Human NOP2/NSUN1 regulates ribosome biogenesis through non-catalytic complex formation with box C/D snoRNPs.

5-Methylcytosine (m5C) is a base modification broadly found on various RNAs in the human transcriptome. In eukaryotes, m5C is catalyzed by enzymes of the NSUN family composed of seven human members (NSUN1-7). NOP2/NSUN1 has been primarily characterized in budding yeast as an essential ribosome biogenesis factor required for the deposition of m5C on the 25S ribosomal RNA (rRNA). Although human NOP2/NSUN1 has been known to be an oncogene overexpressed in several types of cancer, its functions and substrates remain poorly characterized. Here, we used a miCLIP-seq approach to identify human NOP2/NSUN1 RNA substrates. Our analysis revealed that NOP2/NSUN1 catalyzes the deposition of m5C at position 4447 on the 28S rRNA. We also find that NOP2/NSUN1 binds to the 5'ETS region of the pre-rRNA transcript and regulates pre-rRNA processing through non-catalytic complex formation with box C/D snoRNAs. We provide evidence that NOP2/NSUN1 facilitates the recruitment of U3 and U8 snoRNAs to pre-90S ribosomal particles and their stable assembly into snoRNP complexes. Remarkably, expression of both WT and catalytically inactive NOP2/NSUN1 in knockdown background rescues the rRNA processing defects and the stable assembly of box C/D snoRNP complexes, suggesting that NOP2/NSUN1-mediated deposition of m5C on rRNA is not required for ribosome synthesis.

Platelet-Rich Plasma Lysate Enhances the Osteogenic Differentiation of Adipose-Derived Stem Cells.

ABSTRACT: Adipose-derived stem cells (ADSCs) have become an accepted source of cells in bone tissue engineering. This study aimed to investigate whether platelet-rich plasma (PRP) lysate can replace traditional fetal bovine serum as a culture medium with the enhanced proliferation and osteogenic potential of ADSCs. We divided the experiment into 5 groups where the ADSCs were cultured in an osteogenic medium containing 2.5%, 5%, 7.5%, and 10% PRP lysate with 10% fetal bovine serum as the control group. The cell proliferation, alkaline phosphatase (ALP) activity, ALP stain, alizarin red stain, osteocalcin (OCN) protein expression, and osteogenic-specific gene expression were analyzed and compared among these groups. The outcome showed that all PRP lysate-treated groups had good ALP stain and ALP activity performance. Better alizarin red stains were found in the 2.5%, 5%, and 7.5% PRP lysate groups. The 2.5% and 5% PRP lysate groups showed superior results in OCN quantitative polymerase chain reaction, whereas the 5% and 7.5% PRP lysate groups showed higher OCN protein expressions. Early RUNX2 (Runt-related transcription factor 2 () genes were the most expressed in the 5% PRP lysate group, followed by the 2.5% PRP lysate group, and then the 7.5% PRP lysate group. Thus, we concluded that 5% PRP lysate seemed to provide the optimal effect on enhancing the osteogenic potential of ADSCs. Platelet-rich plasma lysate-treated ADSCs were considered to be a good cell source for application in treating nonunion or bone defects in the future.

Misdiagnosis of ß-Thalassemia Major Due to Chinese Gγ+(Aγδß)0-Thalassemia Combined with ß0-Thalassemia.

δß-thalassemia is a rare type of thalassemia characterized by increased Hb F levels, including mainly Chinese Gγ(Aγδß)0-thalassemia, Yunnanese Gγ(Aγδß)0-thalassemia, Cantonese Gγ(Aγδß)0-thalassemia in China. Due to the low rate of δß-thalassemia carriers, there are few reports of δß-thalassemia combined with ß-thalassemia causing ß-thalassemia major. Herein, we described the combination of Chinese Gγ(Aγδß)0-thalassemia and ß-thalassemia leading to ß-thalassemia major in a Chinese patient. Hemoglobin analysis was performed by capillary electrophoresis (CE). Routine genetic analysis was carried out by gap-polymerase chain reaction (Gap-PCR) and PCR and reverse dot blot (PCR-RDB). Multiple ligation-dependent probe amplification (MLPA) was used to detect the large deletion, and Gap-PCR confirmed the deletion. A CE result showed an elevated Hb F level of 98.7% and 11.7% in the proband and her mother, but the proband was diagnosed with ßCD17M/ßCD17M using routine genetic analysis. However, her father was heterozygous for CD17 in ß-globin, and her mother was detected as SEA heterozygous. The further analysis presented that the proband had actually missed the diagnosis of Chinese Gγ(Aγδß)0-thalassemia by MLPA and PCR-RDB. Finally, the genotype of the proband was corrected from ßCD17M/ßCD17M to ßCD17M/ßGγ(Aγδß)0. This is the first report of Chinese Gγ(Aγδß)0-thalassemia combined with ß-thalassemia resulting in ß-thalassemia major in China. Screening for δß-thalassemia by Hb analysis could be an effective method.

[Mechanism of Yupingfeng Powder on hepatic insulin resistance in type 2 diabetes mellitus rats by regulating IRS/PI3K/Akt pathway].

Based on the insulin receptor substrate(IRS)/phosphoinositide 3-kinase(PI3K)/protein kinase B(Akt) pathway, the intervention effect of Yupingfeng Powder on type 2 diabetes mellitus(T2DM) rats was studied, and the potential mechanism of improving T2DM hepatic insulin resistance was explored. A T2DM rat model was established by feeding with high-fat and high-sugar feed combined with intraperitoneal injection of streptozotocin. Successfully modeled rats were selected and divided into a model group, a positive control group(MET), and a Yupingfeng Powder group. At the same time, a blank group was set up, and corresponding drugs were given by gavage. The model group and blank group were given an equal amount of physiological saline by gavage. During the experiment, body mass and fasting blood glucose were regularly measured, and glucose tolerance and insulin tolerance were measured at the end of the experiment. After the experiment, the levels of blood glucose, insulin, blood lipids, and related liver function indicators were measured; changes in liver pathological damage were observed, levels of liver monoamine oxidase were detected, and qRT-PCR was used to detect mRNA expression levels of IRS/PI3K/Akt pathway related genes. Compared with the model group, the Yupingfeng Powder group had an increase in body weight, a decrease in fasting blood glucose, fasting insulin, and steady-state model evaluation index, a decrease in the area under the curve of glucose tolerance and insulin tolerance tests, a decrease in serum total cholesterol, triglycerides, and low-density lipoprotein cholesterol content, and an increase in high-density lipoprotein cholesterol content. Compared with the model group, the Yupingfeng Powder group showed a decrease in liver monoamine oxidase levels, a decrease in serum aspartate aminotransferase, alanine aminotransferase, alkaline phosphatase, and total bilirubin levels, and an increase in total protein and albumin levels. Hematoxylin-eosin(HE) staining showed a reduction in pathological liver cell damage. Compared with the model group, the Yupingfeng Powder group showed a significant increase in the mRNA expression levels of IRS1, PI3K, and Akt in the liver of rats, as well as a significant decrease in the mRNA expression levels of interleukin-6(IL-6) and tumor necrosis factor-α(TNF-α). This indicates that Yupingfeng Powder can regulate the IRS/PI3K/Akt signaling pathway and glucose and lipid metabolism disorders, increase insulin sensitivity, improve hepatic insulin resistance, and thus play a therapeutic role in T2DM.

Transcriptionally regulated miR-26a-5p may act as BRCAness in Triple-Negative Breast Cancer.

BACKGROUND: DNA damage and DNA damage repair (DDR) are important therapeutic targets for triple-negative breast cancer (TNBC), a subtype with limited chemotherapy efficiency and poor outcome. However, the role of microRNAs in the therapy is emerging. In this study, we explored whether miR-26a-5p could act as BRCAness and enhance chemotherapy sensitivity in TNBC. METHODS: Quantitative reverse transcription polymerase chain reaction (RT-qPCR) was used to detect the expression of miR-26a-5p in breast cancer tissues and cell lines. CCK-8 was used to measure drug sensitivity in concentration gradient and time gradient. Comet assay was used to detect DNA damage. Flow cytometry was performed to examine apoptosis. Moreover, we used western blot and immunofluorescence to detect biomarkers. Luciferase reporter assay was performed to verify the combination of miR-26a-5p and 3'UTR of target gene. Hormone deprivation and stimulation assay were used to validate the effect of hormone receptors on the expression of miR-26a-5p. Chromatin immunoprecipitation (ChIP) assays were used to verify the binding sites of ER-a or PR with the promoter of miR-26a-5p. Animal experiments were performed to the effect of miR-26a-5p on Cisplatin treatment. RESULTS: The expression of miR-26a-5p was significantly downregulated in TNBC. Overexpressing miR-26a-5p enhanced the Cisplatin-induced DNA damage and following apoptosis. Interestingly, miR-26a-5p promoted the expression of Fas without Cisplatin stimulating. It suggested that miR-26a-5p provided a hypersensitivity state of death receptor apoptosis and promoted the Cisplatin sensitivity of TNBC cells in vitro and in vivo. Besides, miR-26a-5p negatively regulated the expression of BARD1 and NABP1 and resulted in homologous recombination repair defect (HRD). Notably, overexpressing miR-26a-5p not only facilitated the Olaparib sensitivity of TNBC cells but also the combination of Cisplatin and Olaparib. Furthermore, hormone receptors functioned as transcription factors in the expression of miR-26a-5p, which explained the reasons that miR-26a-5p expressed lowest in TNBC. CONCLUSIONS: Taken together, we reveal the important role of miR-26a-5p in Cisplatin sensitivity and highlight its new mechanism in DNA damage and synthetic lethal.

High resolution, high channel count silicon arrayed waveguide grating router on-chip.

A 32×32 100 GHz silicon photonic integrated arrayed waveguide grating router (AWGR) is experimentally demonstrated for dense wavelength division multiplexing (DWDM) applications. The dimension of the AWGR is 2.57 mm×1.09 mm with a core size of 1.31 mm×0.64 mm. It exhibits 6.07 dB maximum channel loss non-uniformity with -1.66 dB best-case insertion loss and average channel crosstalk of -15.74 dB. In addition, in the case of 25 Gb/s signals, the device successfully realizes high-speed data routing. The AWG router provides clear optical eye diagrams and low power penalty at bit-error-rates of 10-9.

Compact, ultrabroadband and temperature-insensitive arbitrary ratio power splitter based on adiabatic rib waveguides.

We propose a compact, ultrabroadband and temperature-insensitive adiabatic directional coupler based on rib silicon waveguide-enabling arbitrary splitting ratios. Simulation results show that the device can achieve arbitrary splitting ratios from 1400 to 1600 nm, equal to 50%:50%, 60%:40%, 70%:30%, 80%:20%, and 90%:10% for the fundamental transverse electric mode. The designed device has an excess loss of less than 0.19 dB on the operational waveband. Furthermore, the proposed device shows a great robustness to fabrication imperfection, with a waveguide width deviation of 50 nm and ambient temperature change from 0°C to 200°C. These properties make the design a potential candidate for ultrahigh-density photonic integration chips.

High-efficiency and CMOS compatible out-of-plane light emission based on a silicon coupler.

Photonic antennas are critical in applications such as spectroscopy, photovoltaics, optical communications, holography, and sensors. Metal antennas are widely used because of their small size, but they are difficult to be compatible with a CMOS. All-dielectric antennas are easier to integrate with Si waveguides, but are generally larger in size. In this paper, we propose the design of a small-sized, high-efficiency semicircular dielectric grating antenna. The antenna's key size is only 2.37µm×4.74µm, and the emission efficiency reaches over 64% in the wavelength range from 1.16 to 1.61 µm. The antenna provides a new, to the best of our knowledge, approach for three-dimensional optical interconnections between different decks of integrated photonic circuits.

The Comparison of Functional Outcomes in Patients With Unilateral or Bilateral Intracapsular Mandibular Condylar Fractures After Closed or Open Treatment: A 10-Year Retrospective Study.

BACKGROUND: The treatment strategies for mandibular condylar head fractures, also known as intracapsular condylar fractures (ICFs), have not been concluded. We humbly present our treatment outcomes and share our experience in our department. AIMS AND OBJECTIVES: The aim of this study was to compare the functional outcomes between closed reduction (CR) and open reduction and internal fixation (ORIF) for management of unilateral or bilateral ICFs. MATERIALS AND METHODS: This 10-year retrospective cohort study included 71 patients with 102 ICFs who were treated in our department from May 2007 to August 2017. Nine patients mixed with extracapsular fractures were excluded; thus, 62 patients with 93 ICFs were included. All patients received treatment by the senior surgeon in Chang Gung Memorial Hospital, Linkou Branch, Taiwan. The patient's basic data, fracture morphologies, associated injuries, managements, complications, and maximal mouth opening (MMO) measurement at 1, 3, 6, and 12 months postoperative were reviewed for analysis. RESULTS: Among the 93 fractures, 31 (50%) were bilateral and 31 were unilateral (50%). Based on He's classification, 45 (48%) had type A fracture, 13 (14%) had type B, 5 (5%) had type C, 20 (22%) had type M, and 10 (11%) had no displacement. Maximal mouth opening of 37 mm in unilateral cases after 6 months was significantly higher than the 33-mm MMO in bilateral cases. In addition, the MMO in the ORIF group was significantly higher than that of the CR group in 3 months postoperative. Univariate (odds ratio, 4.92; P = 0.01) and multivariate (odds ratio, 4.76; P = 0.027) analyses revealed CR as an independent risk factor for trismus development compared with ORIF. Malocclusion was observed in 5 patients in both CR and ORIF groups. In addition, 1 patient developed temporomandibular joint osteoarthritis in the CR group. No surgical-related temporary or permanent facial nerve palsy was observed. CONCLUSIONS: Open reduction and internal fixation for condylar head fracture provided better recovery in MMO than CR, and the MMO recovery was less in bilateral condylar head fracture than unilateral condylar head fracture. Open reduction and internal fixation in ICFs have a lower risk for trismus development and should be the treatment of choice in selected cases.

Application of Orthognathic Surgery Principles and Techniques in the Management of Craniomaxillofacial Trauma.

BACKGROUND: Posttraumatic secondary deformities of facial skeleton may occur because of nonmanagement or ill management of primary injuries, whereas some unexpectedly occur even after dedicated management attempts. Orthognathic surgery (OGS) principles and techniques can be used as an efficient tool to correct posttraumatic craniomaxillofacial deformities or skeletal developmental deformities during trauma management. AIM AND OBJECTIVES: The aims of this study were to describe the different types of posttraumatic secondary deformity and address how to use the principles of orthognathic techniques to correct them. MATERIALS AND METHODS: Patients with orthognathic surgical osteotomies during primary or secondary management of facial trauma (referred to as trauma-OGS) during the period of 2010 to 2018 were retrospectively reviewed. Variables pertaining to patients and surgery were collected, including trauma diagnosis, etiology, duration between trauma/primary surgery and secondary presentation, suggested reason for secondary deformity, intervention undertaken to address, and the surgical outcome. RESULTS: Twenty-seven patients were eligible and extensively reviewed. Etiological categorization of trauma-OGS could be done into posttraumatic deformities (18) and developmental deformities (9). The former group was further categorized as OGS done as primary procedure (8) that included immobile Le Fort fractures and delayed initial treatment, and OGS done as secondary procedure (10) that included complex fractures and condylar fractures. The developmental deformity group was categorized into OGS done simultaneously during trauma management (5) or done as a secondary procedure after trauma management (4). CONCLUSIONS: Application of principles and techniques of OGS in indicated primary or secondary management of facial trauma patients should always be considered. The categorization of scenarios presented in this article relating facial trauma and OGS may further help to understand the application.

Facial Fracture Patterns and Severity of Associated Injuries After Motorcycle Accidents.

BACKGROUND: Motorcycle injuries remain a significant cause of motor vehicle-related morbidity and mortality in Taiwan. Besides, the facial region is a commonly fractured site under motorcycle accidents. To date, there are no trauma mechanism-based studies of facial fractures. AIM AND OBJECTIVES: This study aims to determine the facial fracture patterns, the severity of head trauma, and associated injuries by different motorcycle-related trauma mechanisms enabling a greater understanding of its distribution and magnitude. METHODS: This is a retrospective descriptive analysis conducted over a 2-year period at Linkou Chang Gung Memorial Hospital. We focused on the population of maxillofacial injury caused by motorcycle accidents. We divided the patient cohort into 3 main trauma mechanisms: single-motorcycle collision (SM group), motorcycle-to-motorcycle collision (MM group), motorcycle-to-vehicle collision (MV group). Data, including demographics, age, fracture patterns of facial bones, and other associated injuries, were collected. RESULTS: A total of 881 cases were identified that involved facial fractures. Most patients were male (71%), young adult (mean age, 32.49 years), and the most common fracture region is the midfacial fracture (79.5%, 700 victims). Among the 3 groups, the MM group was less likely to sustain severe injuries by trauma score system, less head injury and mortality rate. The MV group and SM group have similar mortality rates but different fracture pattern tendencies. Lower facial fractures were more likely in the MV group, but midface fractures in the SM group. Associated injuries were higher in the MV group. CONCLUSIONS: Our study presents the different trends of fracture patterns and injury under 3 main mechanisms of motorcycle casualties. We document all these data in the hope of providing insights into trauma doctors dealing with motorcycle accidents.

Comparison of the Effectiveness Between Conventional and Modified Cinch Suture Techniques in LeFort I Osteotomy: A Systematic Review and Meta-Analysis of Randomized Control Trials.

BACKGROUND: LeFort I osteotomy changes the morphology of the nose. The cinch suture has been proven to prevent the increase in nasal base and alar width. Different types of cinch sutures have been proposed. However, their effectiveness is unclear. AIM AND OBJECTIVES: The aim of this study was to compare the surgical outcomes between conventional and modified cinch techniques through a systematic review and meta-analysis of randomized control trials (RCTs). MATERIAL AND METHODS: We performed systematic search from Embase, PubMed, and the Cochrane Library according to the Preferred Reporting Items for Systematic Reviews and Meta-Analyses statement up to March 2021. The surgical techniques of different cinch sutures were reviewed, and the outcomes of nasal alar width and alar base width were compared between modified and conventional methods. RESULTS: A total of 4 eligible RCTs were included in this meta-analysis. Pooled data showed no significant difference in alar base width change between modified and conventional methods (mean difference, -0.37; 95% confidence interval, -1.32 to 0.57; P = 0.44). Pooled data of 3 studies also showed no significant difference in nasal alar width change (mean difference, -0.11; 95% confidence interval, -1.18 to 0.95; P = 0.83). CONCLUSION: Based on the current data pooled from the available RCTs, no significant difference was found between the conventional cinch technique and the modified technique.

The influence on surface characteristic and biocompatibility of nano-SnO2-modified titanium implant material using atomic layer deposition technique.

BACKGROUND/PURPOSE: To investigate the surface characteristics of titanium (Ti) implant materials, which were coated with different thicknesses of nanoscale tin oxide (SnO2) using the atomic layer deposition technique, and evaluated its biological performance on human embryonic palatal mesenchyme (HEPM) cells. METHODS: The thickness of the coating layer on Ti was 0 (Ti0), 20 nm (Ti20), 50 nm (Ti50), and 100 nm (Ti100), respectively. The surface morphology was observed with an SEM and AFM. The root mean square roughness of micron-scale (mRq) and nanoroughness (nRq) of Ti discs' surface were measured. The Alamar blue (AB) assay and F-actin fluorescence staining were used to evaluate the biocompatibility, and the osteocalcin (OCN) was measured to clarify the differentiation of HEPM cells on materials. RESULTS: In the coating groups, the mRq was decreased, but the nRq was increased. The spreading and polygonal morphology of HEPMs was apparent in coating groups. On Day 4, the survival rate of HEPM cells on Ti0 was higher than on Ti20 and Ti50. There was no significant difference on Day 7, Day 10, and Day 14. The OCN was significantly higher on Day 14 in all the coating groups than Ti0. CONCLUSION: The results showed that the cell growth was intensified with rough surfaces. However, the OCN and morphology change was prominent when the nanoroughness was increased, which meant the increased nanoroughness might enhance OCN production and improve the tendency of osseointegration. The nanoscale SnO2 coating could increase the ability of bone formation but not cell growth.

Aesthetic Outcome of Primary Rhinoplasty of Saddle Nose Deformity in Naso-Orbital Ethmoidal Fractures in Asian Patients.

BACKGROUND: Saddle nose deformity following naso-orbital ethmoidal (NOE) fractures remain a challenging problem for the reconstructive surgeon. Early reduction and internal fixation allow for fracture stabilization but is unable to address the problem of the depressed nasal dorsum, especially after soft tissue shrinkage. The aim of this study is to evaluate the outcome of primary rhinoplasty in patients with NOE fractures. MATERIALS AND METHODS: From 2016 to 2019, 9 patients presented to our department with NOE fractures complicated by saddle nose deformity underwent primary nasal reconstruction at the time of their fracture fixation. Life size (1:1) frontal and lateral postoperative photographs were taken. Three objective measurements were made, including the nasofrontal angle, tip projection, and radix projection. These measurements were compared between normal persons (group 1), preoperative patients (group 2), and postoperative patients (group 3). Nose aesthetic assessment was carried out via a panel assessment using a Visual Analog Scale of 5. Patient satisfaction was further assessed subjectively by the patient themselves using the Visual Analog Scale. RESULTS: When comparing group 3 to 2, a significant reduction in the nasofrontal angles was found with an accompanying increase in the radix and tip projection ( P <0.05). No statistical significance between normal persons and postprimary rhinoplasty patients was noted between groups 1 and 3. Average patient satisfaction scored 3.86±1.07 compared with 3.63±0.84 by laypersons and 4±0.77 by specialists' panel. CONCLUSION: Primary nasal reconstruction may be an alternative method for achieving optimum results following NOE fractures preventing the development of secondary saddle nose deformity with a shortened nose which may potentially be more difficult to correct.

Silicon modulator based on omni junctions by effective 3D Monte-Carlo method.

3D doping structure has significant advantages in modulation efficiency and loss compared with 2D modulator doping profiles. However, to the best of our knowledge, previous work on 3D simulation methods for interdigitated doping designs applied simplified models, which prohibited complex 3D doping. In this work, innovative omni junctions, based on the effective 3D Monte-Carlo method, are believed to be the first proposed for high-performance modulators. Simulation results show that the modulation efficiency reaches 0.88 V·cm, while the loss is only 16 dB/cm, with capacitance below 0.42 pF/mm. This work provides a modulator design with superior modulation efficiency and serviceability for high-speed datacom.

De-Escalation Dual Antiplatelet Therapy Prevail over Potent P2Y12 Inhibitor Monotherapy in Patients with Acute Coronary Syndrome Undergone Percutaneous Coronary Intervention: A Network Meta-Analysis.

Background: Dual antiplatelet therapy (DAPT) with potent P2Y12 inhibitor is the cornerstone of acute coronary syndrome (ACS) management. Balancing the effects of different strategies of antiplatelet therapy including DAPT de-escalation, potent P2Y12 inhibitor monotherapy, and conventional DAPT is a hot topic. Methods: A systematic search was conducted from the MEDLINE, PubMed, and Embase through October 2021 to identify various DAPT strategies in randomized controlled trials (RCTs) for treatment of ACS patients after undergoing PCI with drug-eluting stent (DES). The network meta-analysis was performed to investigate the net clinic benefit of the DAPT de-escalation, potent P2Y12 inhibitor monotherapy, as well as conventional DAPT. The primary outcome was net adverse clinical events, defined as a composite of major bleeding and cardiac death, myocardial infarction, stroke, stent thrombosis, or target-vessel revascularization. The secondary outcomes include major adverse cardiac events and trial-defined major or minor bleeding. Results: A total of 14 RCTs with 63,982 patients were included. The DAPT de-escalation was associated with a lower risk of the primary outcome compared with potent P2Y12 inhibitor monotherapy (De-escalation vs monotherapy odds ratio (OR): 0.72 95% confidence interval (CI): 0.55-0.96), and other antiplatelet strategies (De-escalation vs clopidogrel + aspirin OR: 0.49 95% CI: 0.39-0.63; De-escalation vs prasugrel + aspirin OR: 0.76 95% CI: 0.59-0.98; De-escalation vs ticagrelor + aspirin OR: 0.76 95% CI: 0.55-0.90). There were no statistical differences in the incidence of bleeding (DAPT de-escalation vs P2Y12 inhibitor monotherapy OR: 0.73 95% CI: 0.47-1.12) and major adverse cardiac events (DAPT de-escalation vs P2Y12 inhibitor monotherapy OR: 0.79 95% CI: 0.59-1.08) between DAPT de-escalation and potent P2Y12 inhibitor monotherapy. Conclusions: This network meta-analysis showed that DAPT de-escalation would reduce the net adverse clinical events, compared with potent P2Y12 inhibitor monotherapy, for ACS patients undergone PCI treatment.

Target-Based Virtual Screening and LC/MS-Guided Isolation Procedure for Identifying Phloroglucinol-Terpenoid Inhibitors of SARS-CoV-2.

The coronavirus disease 2019 (COVID-19) pandemic, caused by severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2), has led to more than 5 million deaths worldwide to date. Due to the limited therapeutic options so far available, target-based virtual screening with LC/MS support was applied to identify the novel and high-content compounds 1-4 with inhibitory effects on SARS-CoV-2 in Vero E6 cells from the plant Dryopteris wallichiana. These compounds were also evaluated against SARS-CoV-2 in Calu-3 cells and showed unambiguous inhibitory activity. The inhibition assay of targets showed that compounds 3 and 4 mainly inhibited SARS-CoV-2 3CLpro, with effective Kd values. Through docking and molecular dynamics modeling, the binding site is described, providing a comprehensive understanding of 3CLpro and interactions for 3, including hydrogen bonds, hydrophobic bonds, and the spatial occupation of the B ring. Compounds 3 and 4 represent new, potential lead compounds for the development of anti-SARS-CoV-2 drugs. This study has led to the development of a target-based virtual screening method for exploring the potency of natural products and for identifying natural bioactive compounds for possible COVID-19 treatment.

Compact, broadband, and low-loss silicon photonic arbitrary ratio power splitter using adiabatic taper.

The arbitrary ratio power splitter is widely used in photonic integrated circuits (PICs), for signal monitoring, power equalization, signal feedback, and so on. Here we designed a fabrication-tolerant, compact, broadband, and low-loss arbitrary ratio power splitter. The proposed arbitrary ratio power splitter was realized with an adiabatically tapered silicon rib waveguide with 70 nm shallow etches and an Si3N4 waveguide. The fabrication analysis confirmed that both of them are robust to fabrication errors. 3D finite-difference time-domain simulations show a very low excess loss (less than 0.02 dB for Si3N4 waveguide and 0.05 dB for Si rib waveguide), and a broadband operating wavelength range (100 nm). Good fabrication tolerance and standard critical dimensions make the arbitrary ratio power splitter compatible with the standard fabrication process of commercial silicon photonic foundries.

Broadband and CMOS compatible polarization splitter-rotator based on a bi-level taper.

A silicon-on-insulator polarization diversity scheme is proposed. Based on an asymmetrical evanescent coupler, a broadband and compact polarization splitter-rotator comprising mode conversion tapers and mode sorting asymmetric Y junctions is optimized with silicon dioxide upper cladding and a silicon nitride waveguide. The simulation results show mode conversion loss is less than 0.2 dB, and the extinction ratio is lower than -17dB in the wavelength range of 1.48µm to 1.67µm.