Ligand-Driven Grain Engineering of High Mobility Two-Dimensional Perovskite Thin-Film Transistors.

Controlling grain growth is of great importance in maximizing the charge carrier transport for polycrystalline thin-film electronic devices. The thin-film growth of halide perovskite materials has been manipulated via a number of approaches including solvent engineering, composition engineering, and post-treatment processes. However, none of these methods lead to large-scale atomically flat thin films with extremely large grain size and high charge carrier mobility. Here, we demonstrate a novel π-conjugated ligand design approach for controlling the thin-film nucleation and growth kinetics in two-dimensional (2D) halide perovskites. By extending the π-conjugation and increasing the planarity of the semiconducting ligand, nucleation density can be decreased by more than 5 orders of magnitude. As a result, wafer-scale 2D perovskite thin films with highly ordered crystalline structures and extremely large grain size are readily obtained. We demonstrate high-performance field-effect transistors with hole mobility approaching 10 cm2 V-1 s-1 with ON/OFF current ratios of ∼106 and excellent stability and reproducibility. Our modeling analysis further confirms the origin of enhanced charge transport and field and temperature dependence of the observed mobility, which allows for clear deciphering of the structure-property relationships in these nascent 2D semiconductor systems.

[Challenges and Dilemmas of Providing Healthcare to Patients in Home Care Settings With Hard-to-Heal Wounds].

Hard-to-heal wounds (HHW) represent wound beds that are at high risk of stagnating during the inflammatory or proliferative phase because of various internal or external factors. A wound area reduction of less than 40% in 4 weeks is an indicator of HHW. With the acceleration of population aging, an increasing number of older adults are developing various chronic diseases with comorbidities. Although many older adults are affected by HHW, patients are regularly expected to recuperate at home or in long-term care institutions rather than in hospitals because of shortened hospitalization periods and changes in the medical insurance system. The provision of healthcare to patients with HHW in home settings is currently complicated by the lack of systematic nursing education on wound care, the lack of evidence-based guidelines for home wound care, and the inadequate wound care skills of nurses. HHW have major physical, psychological, and economic impacts on patients and their families and increase stress and frustration in nurses. Inappropriate wound care interventions increase medical expenditures and have multifaceted effects that are largely ignored by the medical care system. This phenomenon, which encompasses HHW, has been called a silent epidemic. In this paper, HHW are defined, the current status of home wound healing worldwide is analyzed, the relevant challenges and strategy implementations are discussed, and recommendations for the home care of HHW are provided.

Immunomodulator polyinosinic-polycytidylic acid enhances the inhibitory effect of 13-cis-retinoic acid on neuroblastoma through a TLR3-related immunogenic-apoptotic response.

High-risk neuroblastoma is associated with low long-term survival rates due to recurrence or metastasis. Retinoids, including 13-cis-retinoic acid (13cRA), are commonly used for the treatment of high-risk neuroblastoma after myeloablative therapy; however, there are significant side effects and resistance rates. In this study, we demonstrated that 13cRA has a better antiproliferative effect in MYCN-amplified neuroblastoma cells than in MYCN-nonamplified neuroblastoma cells. In MYCN-amplified SK-N-DZ cells, 13cRA induced significant upregulation of toll-like receptor 3 (TLR3) and mitochondrial antiviral-signaling protein (MAVS) expression in a time-dependent manner. Furthermore, poly (I:C), a synthetic agonist of TLR3, effectively synergized with 13cRA to enhance antiproliferative effects through upregulation of the innate immune signaling and the mitochondrial stress response, leading to augmentation of the apoptotic response in 13cRA-responsive cancer cells. In addition, the 13cRA/poly (I:C) combination induced neural differentiation through activation of retinoic acid receptors beta (RAR-ß), restoring expression of α-thalassemia/mental retardation syndrome X-linked (ATRX) protein, and inhibiting vessel formation, leading to retarded tumor growth in a mouse xenograft model. These results suggest that the combination of poly (I:C) and RA may provide synergistic therapeutic benefits for treatment of patients with high-risk neuroblastoma.

First principles study on hydrogen doping induced metal-to-insulator transition in rare earth nickelates RNiO3 (R = Pr, Nd, Sm, Eu, Gd, Tb, Dy, Yb).

Rare earth nickelates (RNiO3), consisting of a series of correlated transition metal oxides, have received increasing attention due to their sharp metal-to-insulator transition (MIT). Previous reports focused on understanding the origin and modulation of thermally driven MIT by strain effects, cation doping, or external electric field. Recently, it was reported that isothermal chemical doping of hydrogen can induce MIT and increase resistivity by ∼8 orders of magnitude, which opens up the possibility of utilizing these oxides to develop advanced electronic and sensing devices. In this study, we applied first principles methods to study geometric and electronic structures of MIT driven by hydrogen doping in a series of rare earth nickelates RNiO3 (R = Pr, Nd, Sm, Eu, Gd, Tb, Dy, Yb). Hybrid functional HSE06 calculations predict that all oxides under study exhibit sharp MIT, opening up an ∼3 eV band gap after hydrogen doping, with band gap values slightly increasing from Pr to Yb. We find that the R site elements play a key role in determining hydrogen adsorption energies and hydrogen migration barriers, which controls how difficult it would be for the hydrogen atoms to migrate inside the oxides. Detailed information on geometries, electronic structures, migration barriers and adsorption energies of hydrogen provides guidance for further optimizing these materials for future experiments and applications.

A Surface-Oxide-Rich Activation Layer (SOAL) on Ni2 Mo3 N for a Rapid and Durable Oxygen Evolution Reaction.

The oxygen evolution reaction (OER) is key to renewable energy technologies such as water electrolysis and metal-air batteries. However, the multiple steps associated with proton-coupled electron transfer result in sluggish OER kinetics and catalysts are required. Here we demonstrate that a novel nitride, Ni2 Mo3 N, is a highly active OER catalyst that outperforms the benchmark material RuO2 . Ni2 Mo3 N exhibits a current density of 10 mA cm-2 at a nominal overpotential of 270 mV in 0.1 m KOH with outstanding catalytic cyclability and durability. Structural characterization and computational studies reveal that the excellent activity stems from the formation of a surface-oxide-rich activation layer (SOAL). Secondary Mo atoms on the surface act as electron pumps that stabilize oxygen-containing species and facilitate the continuity of the reactions. This discovery will stimulate the further development of ternary nitrides with oxide surface layers as efficient OER catalysts for electrochemical energy devices.

Highly Stable Lead-Free Perovskite Field-Effect Transistors Incorporating Linear π-Conjugated Organic Ligands.

Sn(II)-based halide perovskite semiconductor materials are promising for a variety of electronics and optoelectronics applications but suffer from poor intrinsic materials stability. Here, we report the synthesis and characterization of a stable Sn (II)-based two-dimensional perovskite featuring a π-conjugated oligothiophene ligand, namely (4Tm)2SnI4, where 4Tm is 2-(3″',4'-dimethyl-[2,2':5',2″:5″,2″'-quaterthiophen]-5-yl)ethan-1-ammonium. The conjugated ligands facilitate formation of micrometer-size large grains, improve charge injections, and stabilize the inorganic perovskite layers. Thin film field-effect transistors based on (4Tm)2SnI4 exhibit enhanced hole mobility up to 2.32 cm2 V-1 s-1 and dramatically improved stability over the previous benchmark material (PEA)2SnI4. Stabilization mechanisms were investigated via single-crystal structure analysis as well as density functional theory calculations. It was found that the large conjugated organic layers not only serve as thick and dense barriers for moisture and oxygen but also increase the crystal formation energy via strong intermolecular interactions. This work demonstrates the great potential of molecular engineering for organic-inorganic hybrid perovskite materials toward applications in high-performance electronics and optoelectronics.

A computational study of hydrogen doping induced metal-to-insulator transition in CaFeO3, SrFeO3, BaFeO3 and SmMnO3.

The metal-to-insulator transition (MIT) in rare earth perovskite oxides has drawn significant research interest for decades to unveil the underlying physics and develop novel electronic materials. Recently, chemical doping induced MIT in SmNiO3 has been observed experimentally, with its resistivity changed by eight orders of magnitude. The mechanism of switching from one singly occupied Ni eg orbital to two singly occupied eg orbitals upon doping has been proposed by experimentalists and verified by computation. Here, we tested if this mechanism can be generally applied to other perovskite oxides with non-Ni B site elements. We applied first principles density functional theory (DFT) to study a series of perovskite oxides, CaFeO3, SrFeO3, BaFeO3 and SmMnO3. We investigated the geometry and electronic structures of pure and hydrogen doped oxides. We found that pure CaFeO3, SrFeO3 and BaFeO3 are metallic while pure SmMnO3 has a small band gap of 0.69 eV. Upon hydrogen doping, band gap opening was predicted for all four oxides: HSE06 predicted band gap values of 1.58 eV, 1.40 eV, 1.20 eV and 2.55 eV for H-doped CaFeO3, SrFeO3, BaFeO3 and SmMnO3, respectively. This finding opens up research opportunities for exploring a broader range of materials for MIT to be used in optical and electronic devices.

Chiral features of metal phthalocyanines sitting atop the pre-assembled TiOPc monolayer on Ag(111).

The chiral features of the top-layer TiOPc molecules on monolayered TiOPc assembly on Ag(111) were carefully investigated by scanning tunnelling microscopy and local work function measurements. Combined with the density functional theory calculations, systematic experimental explorations of the TiOPc/TiOPc, CuPc/TiOPc and TiOPc/CuPc systems on Ag(111) revealed that the chirality originated from asymmetric electronic interactions rather than conformational change, which might be related to the high performance of the photoelectronic devices based on the MPc complexes.

Steering On-Surface Reactions by a Self-Assembly Approach.

4,4'-Bis(2,6-difluoropyridin-4-yl)-1,1':4',1''-terphenyl (BDFPTP) molecules underwent dehydrocyclization and covalent coupling reactions on Au(111) according to scanning tunneling microscopy (STM) measurements and density functional theory (DFT) calculations. Self-assembly of the reactants in well-defined molecular domains prior to reaction could greatly enhance the regioselectivity of the dehydrocyclization reaction and suppress defluorinated coupling, demonstrating that self-assembly can efficiently steer on-surface reactions. Such a strategy could be of great importance in surface chemistry and widely applied to control on-surface reactions.

Destruction of chemical warfare agents using metal-organic frameworks.

Chemical warfare agents containing phosphonate ester bonds are among the most toxic chemicals known to mankind. Recent global military events, such as the conflict and disarmament in Syria, have brought into focus the need to find effective strategies for the rapid destruction of these banned chemicals. Solutions are needed for immediate personal protection (for example, the filtration and catalytic destruction of airborne versions of agents), bulk destruction of chemical weapon stockpiles, protection (via coating) of clothing, equipment and buildings, and containment of agent spills. Solid heterogeneous materials such as modified activated carbon or metal oxides exhibit many desirable characteristics for the destruction of chemical warfare agents. However, low sorptive capacities, low effective active site loadings, deactivation of the active site, slow degradation kinetics, and/or a lack of tailorability offer significant room for improvement in these materials. Here, we report a carefully chosen metal-organic framework (MOF) material featuring high porosity and exceptional chemical stability that is extraordinarily effective for the degradation of nerve agents and their simulants. Experimental and computational evidence points to Lewis-acidic Zr(IV) ions as the active sites and to their superb accessibility as a defining element of their efficacy.

Low-temperature scanning tunneling microscopy study on the electronic properties of a double-decker DyPc2 molecule at the surface.

To fully achieve potential applications of the double-decker molecules containing rare earth elements as single-molecule magnets in molecular spintronics, it is crucial to understand the 4f states of the rare earth atoms sandwiched in the double-decker molecules by metal electrodes. In this study, low-temperature scanning tunneling microscopy and spectroscopy were employed to investigate the isolated double-decker DyPc2 molecule adsorbed on Au(111) via its differential conductance measurements. The experimental results revealed that the differential conductance maps acquired at a constant height mode simply depicted the authentic molecular orbitals; moreover, the differential conductance maps achieved at a constant current mode could not directly probe the 4f states of the sandwiched Dy atom. This was consistent with the spectra obtained over the molecule center around the Fermi level, indicative of no Kondo feature. Upon decreasing the tip-molecule distance, the CH-mode images presented high-resolution structure but no information of the 4f states. All results indicated that the Dy atom barely contributed to the tunneling current because of the absence of coupling with the microscope tip, echoing the inaccessibility of the Dy 4f states in the double-decker DyPc2 molecule.

New concepts and modeling strategies to design and evaluate photo-electro-catalysts based on transition metal oxides.

Photocatalytic production of transportation fuels should be among our long term strategies to achieve energy and environmental sustainability for the planet, but the technology is hampered by a lack of sufficiently efficient catalysts. Although efficiency is ultimately determined by laboratory measurements, theory and computation have become powerful tools for examining underlying mechanisms and guiding avenues of inquiry. In this review, we focus on first principles calculations of transition metal oxide semiconductor photocatalysts. We discuss how theory can be applied to investigate various aspects of a photocatalytic cycle: light absorption, electron/hole transport, band edge alignments of semiconductors, and surface chemistry. Emphasis is placed on identifying accurate models for specific properties and theoretical insights into improving photocatalytic performance.

The only species of Calvisia (Phasmatodea, Necrosciinae) from China, with a new synonymy and additional descriptions.

Calvisia is a colorful winged stick insect genus consisting of 6 subgenera and 44 species widely distributed in temperate and tropical Asia. C. medogensis syn. nov. was discovered in Mdog, Xizang (Tibet), China and is so far the only species recorded from China. We here propose that C. medogensis syn. nov. is a synonym of C. fuscoalata after checking type specimens of both species. New materials studied are deposited in Yunnan Agricultural University, China (YNAU).

In Situ Precision Cell Electrospinning as an Efficient Stem Cell Delivery Approach for Cutaneous Wound Healing.

Mesenchymal stem cell (MSC) therapies have been brought forward as a promising treatment modality for cutaneous wound healing. However, current approaches for stem cell delivery have many drawbacks, such as lack of targetability and cell loss, leading to poor efficacy of stem cell therapy. To overcome these problems, in the present study, an in situ cell electrospinning system is developed as an attractive approach for stem cell delivery. MSCs have a high cell viability of over 90% even with a high applied voltage of 15 kV post-cell electrospinning process. In addition, cell electrospinning does not show any negative effect on the surface marker expression and differentiation capacity of MSCs. In vivo studies demonstrate that in situ cell electrospinning treatment can promote cutaneous wound healing through direct deposition of bioactive fish gelatin fibers and MSCs onto wound sites, leading to a synergic therapeutic effect. The approach enhances extracellular matrix remodeling by increasing collagen deposition, promotes angiogenesis by increasing the expression of vascular endothelial growth factor (VEGF) and forming small blood vessels, and dramatically reduces the expression of interleukin-6 (IL-6) during wound healing. The use of in situ cell electrospinning system potentially provides a rapid, no touch, personalized treatment for cutaneous wound healing.

Water oxidation on pure and doped hematite (0001) surfaces: prediction of Co and Ni as effective dopants for electrocatalysis.

In photoelectrochemical cells, sunlight may be converted into chemical energy by splitting water into hydrogen and oxygen molecules. Hematite (α-Fe(2)O(3)) is a promising photoanode material for the water oxidation component of this process. Numerous research groups have attempted to improve hematite's photocatalytic efficiency despite a lack of foundational knowledge regarding its surface reaction kinetics. To elucidate detailed reaction mechanisms and energetics, we performed periodic density functional theory + U calculations for the water oxidation reaction on the fully hydroxylated hematite (0001) surface. We investigate two different concentrations of surface reactive sites. Our best model involves calculating water oxidation mechanisms on a pure (1×1) hydroxylated hematite slab (corresponding to 1/3 ML of reactive sites) with an additional overlayer of water molecules to model solvation effects. This yields an overpotential of 0.77 V, a value only slightly above the 0.5-0.6 V experimental range. To explore whether doped hematite can exhibit an even lower overpotential, we consider cation doping by substitution of Fe by Ti, Mn, Co, Ni, or Si and F anion doping by replacing O on the fully hydroxylated surface. The reaction energetics on pure or doped hematite surfaces are described using a volcano plot. The relative stabilities of holes on the active O anions are identified as the underlying cause for trends in energetics predicted for different dopants. We show that moderately charged O anions give rise to smaller overpotentials. Co- or Ni-doped hematite surfaces give the most thermodynamically favored reaction pathway (lowest minimum overpotential) among all dopants considered. Very recent measurements (Electrochim. Acta 2012, 59, 121-127) reported improved reactivity with Ni doping, further validating our predictions.

Origin of the energy barrier to chemical reactions of O2 on Al(111): evidence for charge transfer, not spin selection.

Dissociative adsorption of molecular oxygen on the Al(111) surface exhibits mechanistic complexity that remains surprisingly poorly understood in terms of the underlying physics. Experiments clearly indicate substantial energy barriers and a mysteriously large number of adsorbed single oxygen atoms instead of pairs. Conventional first principles quantum mechanics (density functional theory) predicts no energy barrier at all; instead, spin selection rules have been invoked to explain the barrier. In this Letter, we show that correct barriers arise naturally when embedded correlated electron wave functions are used to capture the physics of the interaction of O(2) with the metal surface. The barrier originates from an abrupt charge transfer (from metal to oxygen), which is properly treated within correlated wave function theory but not within conventional density functional theory. Our potential energy surfaces also identify oxygen atom abstraction as the dominant reaction pathway at low incident energies, consistent with measurements, and show that charge transfer occurs in a stepwise fashion.

Electron transport in pure and doped hematite.

Hematite (α-Fe(2)O(3)) is a promising candidate for photoelectrochemical splitting of water. However, its intrinsically poor conductivity is a major drawback. Doping hematite to make it either p-type or n-type enhances its measured conductivity. We use quantum mechanics to understand how titanium, zirconium, silicon, or germanium n-type doping affects the electron transport mechanism in hematite. Our results suggest that zirconium, silicon, or germanium doping is superior to titanium doping because the former dopants do not act as electron trapping sites due to the higher instability of Zr(III) compared to Ti(III) and the more covalent interactions between silicon (germanium) and oxygen. This suggests that use of n-type dopants that easily ionize completely or promote covalent bonds to oxygen can provide more charge carriers while not inhibiting transport.

Effectiveness of an E-Book App on the Knowledge, Attitudes and Confidence of Nurses to Prevent and Care for Pressure Injury.

AIMS: This study evaluates the effectiveness of an interactive E-book app training program in improving nurses' knowledge, attitudes, and confidence to prevent and care for pressure injury. DESIGN: Randomized experimental study. METHODS: Participants were recruited from a teaching hospital in Taiwan. The study was carried out between 20 March 2014 to 1 April 2016. In total, 164 participants were randomly assigned to a pressure injury E-book app training program (n = 86) or a conventional education program (n = 78) with a one-month follow-up. Outcome variables were levels of pressure injury knowledge, attitudes, and confidence of pressure injury care. RESULTS: Participants answered 51.96% of the pressure injury knowledge questions correctly before the intervention and 75.5% after the intervention. The pressure injury attitude score was slightly positive, with moderate confidence in pressure injury care. The knowledge, attitudes, and confidence of pressure injury care of the two groups in the pretest and posttest groups increased significantly. Analysis of covariance indicated that nurses in the pressure injury E-book app group had significantly greater improvement in knowledge, attitudes, and pressure injury care confidence as compared with the control group. CONCLUSION: The pressure injury E-book app interactive training program was effective in improving nurses' knowledge and attitudes toward pressure injury care and in enhancing their confidence in pressure injury care; therefore, this program has potential for nurses' in-service education in both Taiwan and worldwide. IMPACT: E-book apps allow individuals to control the time and place of learning. Direct observation of procedural skills can provide feedback to trainees on techniques to ensure learning effectiveness and pressure injury care quality.

Testing variations of the GW approximation on strongly correlated transition metal oxides: hematite (α-Fe2O3) as a benchmark.

Quantitative characterization of low-lying excited electronic states in materials is critical for the development of solar energy conversion materials. The many-body Green's function method known as the GW approximation (GWA) directly probes states corresponding to photoemission and inverse photoemission experiments, thereby determining the associated band structure. Several versions of the GW approximation with different levels of self-consistency exist in the field. While the GWA based on density functional theory (DFT) works well for conventional semiconductors, less is known about its reliability for strongly correlated semiconducting materials. Here we present a systematic study of the GWA using hematite (α-Fe(2)O(3)) as the benchmark material. We analyze its performance in terms of the calculated photoemission/inverse photoemission band gaps, densities of states, and dielectric functions. Overall, a non-self-consistent G(0)W(0) using input from DFT+U theory produces physical observables in best agreement with experiments.