RESUMEN
The aim of this study was to establish a web-based platform for exchanging medical device management and maintenance experiences to enhance the professional competency of clinical engineers (CEs), which ensures the quality of medical devices and increases patients' satisfaction with medical services. Medical devices play an essential role in diagnosis and disease management. CEs are responsible for providing functional medical devices that contribute worthwhile functions to a medical service to improve patients' health and safety. The purpose of the platform is to facilitate collection and sharing of medical device incidents experiences to improve CEs' capability. To provide useful and practical information for CEs, an event review committee, composed of experts with more than 20 years of clinical engineering experience who were recruited as reviewers, was established under the platform. Cases submitted to the platform were required to have comprehensive descriptions of the device and events. Each case was evaluated by at least two reviewers based on five evaluation indices: (1) severity, (2) breadth, (3) frequency, (4) insidiousness, and (5) correctness. After being reviewed, each final report was published on the platform to be shared with the event submitters and other members. The results show that 116 staffs from 32 different hospitals, registered to join this platform. From January 2015 to December 2016, 70 events were submitted with 56 reports. This study also assessed the platform's benefits for CEs. A total of 93 respondents completed a questionnaire survey: 93% of the CEs agreed that the information from the platform helped them do their job. The web-based platform has high value as an experience-sharing interface for medical devices. The CEs obtained extremely useful information from the platform for medical device management and their daily duties. This study provided an online training model with systematic methods to improve the quality and effectiveness of medical device management.
RESUMEN
Calcaneal fracture can lead to long-term disability and have a considerable economic effect. Most calcaneal fractures are intraarticular fractures involving the posterior facet of the subtalar joint. Treating displaced intraarticular calcaneal fractures is complicated because of the lack of an optimal treatment option. Internal fixation typically involves screw-and-plate implants, which can be unfavorable owing to the lack of an anatomic design and the intraoperative bending required for the plate to contour to the irregular surface of the calcaneus. We assessed the outcomes of 30 patients treated using innovative, anatomically designed calcaneal locking plates and the perceived advantages for surgeons. Postoperative computed tomography images of the affected feet were obtained, and the functional performance was recorded. The mean average Böhler angle had increased significantly from 16.8° ± 14.9° to 28.5° ± 9.4° (p < .001). The mean average maximal fracture gap and maximal step-off in the posterior facet of the subtalar joint in the coronal computed tomography images also decreased significantly from 2.8 ± 3.7 mm to 0.8 ± 1.3 mm (p < .01) and from 3.3 ± 2.8 mm to 0.8 ± 1.2 mm (p < .001), respectively. The mean average American Orthopaedic Foot and Ankle Ankle-Hindfoot scale score was 93.9 ± 7.1 at the final follow-up visit. In addition, the surgical time was reduced because bending the plate was not required and the quality of reduction could be assessed easily by examining the gap between the cortex and the plate. The results were promising, revealing that the anatomic locking plate can be used effectively in the treatment of displaced intraarticular calcaneal fractures using simple reduction techniques with a potentially shortened operating time.
Asunto(s)
Placas Óseas , Calcáneo/lesiones , Traumatismos de los Pies/cirugía , Fijación Interna de Fracturas/métodos , Fracturas Intraarticulares/cirugía , Adulto , Calcáneo/cirugía , Diseño de Equipo , Femenino , Traumatismos de los Pies/diagnóstico por imagen , Fijación Interna de Fracturas/instrumentación , Humanos , Fracturas Intraarticulares/diagnóstico por imagen , Masculino , Persona de Mediana Edad , Radiografía , Adulto JovenRESUMEN
PURPOSE: Segmentation of the left ventricle (LV) in cardiac CT (CCT) images is difficult due to the intensity heterogeneity arising from accumulation of contrast agent in papillary muscle and trabeculae carneae. In this study, we demonstrated the random walks method for LV segmentation in CCT through cardiac phases. METHODS: 63 CCT data sets from 7 patients with 9 cardiac phases were included in this study. All cardiac CT examinations were performed with GE 64-detector CT scanner with ECG gating. In each patient, 60-80 ml iohexol was injected at a flow rate of 5 ml/sec followed by 60 ml normal saline solution. Random walks (RW) based on probability of labels was used for LV segmentation. The LV delineations generated by the experienced physician (MD), conventional image-based method (IB), and RW were compared. RESULTS: In general the contours segment the LV closely by RW and MD, but the discrepancies in papillary muscle and trabeculae carneae were observed while using the IB method. CONCLUSION: We showed the RW method potentially improved LV segmentation as compared to the volume by conventional IB method. In this study, we demonstrated the clinical feasibility of LV volume segmentation using random walks algorithm.
Asunto(s)
Interpretación Estadística de Datos , Ventrículos Cardíacos/diagnóstico por imagen , Reconocimiento de Normas Patrones Automatizadas/métodos , Interpretación de Imagen Radiográfica Asistida por Computador/métodos , Tomografía Computarizada por Rayos X/métodos , Disfunción Ventricular Izquierda/diagnóstico por imagen , Algoritmos , Simulación por Computador , Humanos , Modelos Estadísticos , Intensificación de Imagen Radiográfica/métodos , Reproducibilidad de los Resultados , Sensibilidad y EspecificidadRESUMEN
Adequately shaped femoral plate is critical for the fixation of fracture in the pertrochanteric regions. Lateral aspect of greater trochanter is an important region where the proximal femoral plate anchored. However, little is known regarding the morphology of greater trochanter. The objective of this study was to measure main dimensions of greater trochanter and other regions in the proximal end of the femur to provide an anatomical basis for the design of the proximal femoral plate. Anthropometric data on the proximal femur were performed utilizing three-dimensional computational modeling. Computed tomography images of healthy femurs in 53 women and 47 men were contributed to three-dimensional femur modeling. All data were compared between male and female femora. The results showed that mean values for male group were found to be greater in most of measured femoral dimensions. Oppositely, females demonstrated higher neck-shaft angle on anteroposterior view and femoral anteversion angle. The anthropometric data can be used for the anatomical shape design of femoral plates for osteosynthesis of fractures in the trochanteric regions. A distinct plate design may be necessary to accommodate differences between the genders.
Asunto(s)
Pueblo Asiatico , Placas Óseas , Fémur/anatomía & histología , Diseño de Prótesis , Adulto , China , Femenino , Fémur/diagnóstico por imagen , Humanos , Masculino , Tomografía Computarizada por Rayos XRESUMEN
Ventricular hemodynamics plays an important role in assessing cardiac function in clinical practice. The aim of this study was to determine the ventricular hemodynamics based on contrast movement in the left ventricle (LV) between the phases in a cardiac cycle recorded using an electrocardiography (ECG) with cardiac computed tomography (CT) and optical flow method. Cardiac CT data were acquired at 120 kV and 280 mA with a 350 ms gantry rotation, which covered one cardiac cycle, on the 640-slice CT scanner with ECG for a selected patient without heart disease. Ventricular hemodynamics (mm/phase) were calculated using the optical flow method based on contrast changes with ECG phases in anterior-posterior, lateral and superior-inferior directions. Local hemodynamic information of the LV with color coating was presented. The visualization of the functional information made the hemodynamic observation easy.
Asunto(s)
Ventrículos Cardíacos/diagnóstico por imagen , Corazón/diagnóstico por imagen , Hemodinámica/fisiología , Tomografía Computarizada por Rayos X/métodos , Electrocardiografía , Humanos , Procesamiento de Imagen Asistido por ComputadorRESUMEN
Nighttime object detection is challenging due to dim, uneven lighting. The IIHS research conducted in 2022 shows that pedestrian anti-collision systems are less effective at night. Common solutions utilize costly sensors, such as thermal imaging and LiDAR, aiming for highly accurate detection. Conversely, this study employs a low-cost 2D image approach to address the problem by drawing inspiration from biological dark adaptation mechanisms, simulating functions like pupils and photoreceptor cells. Instead of relying on extensive machine learning with day-to-night image conversions, it focuses on image fusion and gamma correction to train deep neural networks for dark adaptation. This research also involves creating a simulated environment ranging from 0 lux to high brightness, testing the limits of object detection, and offering a high dynamic range testing method. Results indicate that the dark adaptation model developed in this study improves the mean average precision (mAP) by 1.5-6% compared to traditional models. Our model is capable of functioning in both twilight and night, showcasing academic novelty. Future developments could include using virtual light in specific image areas or integrating with smart car lighting to enhance detection accuracy, thereby improving safety for pedestrians and drivers.
RESUMEN
The management of peptic ulcer bleeding is clinically challenging. For decades, the Forrest classification has been used for risk stratification for nonvariceal ulcer bleeding. The perception and interpretation of the Forrest classification vary among different endoscopists. The relationship between the bleeder and ulcer images and the different stages of the Forrest classification has not been studied yet. Endoscopic still images of 276 patients with peptic ulcer bleeding for the past 3 years were retrieved and reviewed. The intra-rater agreement and inter-rater agreement were compared. The obtained endoscopic images were manually drawn to delineate the extent of the ulcer and bleeding area. The areas of the region of interest were compared between the different stages of the Forrest classification. A total of 276 images were first classified by two experienced tutor endoscopists. The images were reviewed by six other endoscopists. A good intra-rater correlation was observed (0.92-0.98). A good inter-rater correlation was observed among the different levels of experience (0.639-0.859). The correlation was higher among tutor and junior endoscopists than among experienced endoscopists. Low-risk Forrest IIC and III lesions show distinct patterns compared to high-risk Forrest I, IIA, or IIB lesions. We found good agreement of the Forrest classification among different endoscopists in a single institution. This is the first study to quantitively analyze the obtained and explain the distinct patterns of bleeding ulcers from endoscopy images.
RESUMEN
Red blood cell (RBC) dynamics in capillaries is a useful diagnostic tool for many diseases. Previous study showed that optical flow estimation (OFE) is capable of accurately calculating RBC velocities using image registration technique. The computational fluid dynamics (CFD) method is explored in this study to calculate the RBC velocity in capillaries of finger nail-fold for six cases. The two-dimensional capillary images were reconstructed to three-dimensional, assuming circular cross sections. The no-slip boundary conditions were applied on the vessel walls. The initial velocity of the RBC going into each capillary was calculated by OFE. The velocities of multiple points along each capillary calculated by CFD, V(CFD), were compared with OFE calculations, V(OFE). The calculated RBC velocity was in the range of 56-685µm/s. The average difference (V(CFD) - V(OFE)) with one standard deviation is -2.66±18.61µm/s for all the 48 calculation points, and 0.03±0.12µm/s for all except one points (47 points), indicating that CFD can provide a reasonable accuracy in RBC velocity calculation in finger nail-fold capillaries.
Asunto(s)
Capilares/fisiología , Dedos/irrigación sanguínea , Hemodinámica/fisiología , Hidrodinámica , Angioscopía Microscópica/métodos , Modelos Biológicos , Adulto , Algoritmos , Velocidad del Flujo Sanguíneo/fisiología , Simulación por Computador , Eritrocitos/citología , Humanos , Masculino , Flujo Sanguíneo Regional/fisiología , Adulto JovenRESUMEN
Cutaneous red blood cell velocity in vivo can be measured by using capillaroscopy with image processing techniques. However, unlike simulated blood flow images, there is no standard to determine the accuracy of the techniques for computing blood flow velocities. In this paper, we quantitatively evaluated the accuracy of previously proposed optical flow method for measuring red blood cell velocity in nail-fold capillaries. Blood flow images of subjects under normal and occlusion-release conditions were examined by a capillaroscope. To obtain velocity values, the images were further analyzed by using optical flow, cross-correlation and visual inspection methods, respectively. Visual inspection method was taken as the golden standard to determine the accuracy of blood flow velocity measurement using optical flow and cross-correlation techniques. Results showed that optical flow estimation provided superior accuracy to cross-correlation when assessing real blood flow velocity in nail-fold capillaries. Optical flow estimation is able to measure red blood cell velocity with a high accuracy of 91% and 86% when the observed velocity is less than 0.5mm/s under normal and occlusion-release conditions, respectively. In addition, optical flow method showed good agreement with visual inspection in determining blood flow velocity in both normal and occlusion-release conditions when the high-velocity zone is excluded.
Asunto(s)
Velocidad del Flujo Sanguíneo/fisiología , Capilares/fisiología , Eritrocitos/citología , Angioscopía Microscópica/métodos , Uñas/irrigación sanguínea , Sesgo , Humanos , Interpretación de Imagen Asistida por Computador/métodos , Reproducibilidad de los Resultados , TorniquetesRESUMEN
Sufficient interfragmental movement is the key to successful fracture healing in the theory of secondary bone healing. The far-cortical locking technique enables both stiffness reduction and parallel motion for ideal callus formation and fracture healing, but the influence of plate-bone gap on the performance of far-cortical locking technique remains unclear. The current study conducted a series of finite element analyses with mechanical validation to clarify this issue. Plate-bone gaps were assigned by 1, 2, 3, and 4 mm in a simulated mid-shaft fracture model fixed with locking plate and six semi-rigid locking screws. Axial compressive load to 500 N was applied to the fixation structure to evaluate the structural stiffness, pattern of interfragmental movement (parallel motion), and stresses on the screws. Results revealed the increased plate-bone gaps reduced the structural in order (315.3, 288.8, 264.9, and 243.4 N/mm). Tilting angles for determining parallel interfragmental movement (1.58°-1.85°) and stresses on semi-rigid screws for evaluating implant safety were not severely altered. Greater stresses were found on the screws adjacent to the fracture site in all simulated models. The current study suggested that 1 mm gap between the locking plate and the bone shall be ideal in view of parallel motion achieved balanced callus formation in far-cortical locking technique. Issue of reducing structural stiffness with limited plate-bone gap distance should be further investigated.
Asunto(s)
Tornillos Óseos , Fijación Interna de Fracturas , Fenómenos Biomecánicos , Placas Óseas , Análisis de Elementos Finitos , Curación de FracturaRESUMEN
With the decreasing incidence of peptic ulcer bleeding (PUB) over the past two decades, the clinician experience of managing patients with PUB has also declined, especially for young endoscopists. A patient with PUB management requires collaborative care involving the emergency department, gastroenterologist, radiologist, and surgeon, from initial assessment to hospital discharge. The application of artificial intelligence (AI) methods has remarkably improved people's lives. In particular, AI systems have shown great potential in many areas of gastroenterology to increase human performance. Colonoscopy polyp detection or diagnosis by an AI system was recently introduced for commercial use to improve endoscopist performance. Although PUB is a longstanding health problem, these newly introduced AI technologies may soon impact endoscopists' clinical practice by improving the quality of care for these patients. To update the current status of AI application in PUB, we reviewed recent relevant literature and provided future perspectives that are required to integrate such AI tools into real-world practice.
RESUMEN
ABSTRACT: Intradialytic hypotension (IDH) may lead to a poor life quality and was associated with cardiovascular mortality in patients under hemodialysis. This study investigated the autonomic nerve and cardiovascular function in the IDH episodes.In this case-control study, 70 end stage renal disease patients (198 visits) were recruited. Pulse wave analysis and heart rate variability were evaluated before hemodialysis. Two definitions of IDH were confirmed by medical records. IDH-f indicated a drop of systolic blood pressure or mean arterial pressure, accompanied with symptoms; IDH-n indicated a low nadir systolic pressure during the hemodialysis. All parameters were evaluated for the possible predisposing factors under each definition.A total of 24 IDH-f and 37 IDH-n were noted in 177 visits. For both definitions, central pulse pressure seemed to be a consistent predisposing factor. Furthermore, lower sympathetic activity (odds ratio [OR] 0.55; 95% confidence interval [CI] 0.35-0.87), lower pulse pressure (OR 0.95; 95% CI 0.92-0.98), and higher augmentation index (OR 17.36; 95% CI 1.48-204.10) were the possible predisposing factors for IDH-f. On the contrary, lower mean arterial pressure (OR 0.87; 95% CI 0.78-0.98) was identified as the possible factor for IDH-n.It was suggested that the lower central pulse pressure and sympathetic activity might be involved in the development of IDH.
Asunto(s)
Hemodinámica/fisiología , Hipotensión/etiología , Hipotensión/fisiopatología , Fallo Renal Crónico/terapia , Diálisis Renal/efectos adversos , Adulto , Anciano , Anciano de 80 o más Años , Presión Sanguínea/fisiología , Estudios de Casos y Controles , Frecuencia Cardíaca , Humanos , Persona de Mediana Edad , Análisis de la Onda del PulsoRESUMEN
Quantization of red blood cell (RBC) velocity in micro-vessel is one of the techniques for dynamic observation of microvascular mechanisms. The flow measurement of RBC in micro-vessels is still a challenge nowadays. Image processing for velocity measurement using a frame by frame analysis is a common approach. The accuracy of the calculations, which is algorithm dependant, has rarely been examined. In this paper, we evaluated the accuracy of the existing methods, which includes cross correlation method, Hough transform method, and optical flow method, by applying these methods to simulated micro-vessel image sequences. Simulated experiments in various micro-vessels with random RBC motion were applied in the evaluation. The blood flow variation in the same micro-vessels with different RBC densities and velocities was considered in the simulations. The calculation accuracy of different flow patterns and vessel shapes were also examined, respectively. Based on the comparison, the use of an optical flow method, which is superior to a cross-correlation method or a Hough transform method, is proposed for measuring RBC velocity. The study indicated that the optical flow method is suitable for accurately measuring the velocity of the RBCs in small or large micro-vessels.
Asunto(s)
Simulación por Computador , Eritrocitos/fisiología , Interpretación de Imagen Asistida por Computador , Microcirculación , Microscopía por Video , Microvasos/fisiología , Modelos Cardiovasculares , Algoritmos , Animales , Velocidad del Flujo Sanguíneo , Hemorreología , Humanos , Microvasos/anatomía & histología , Reproducibilidad de los ResultadosRESUMEN
A new approach for the measurement of the red blood cell (RBC) velocity from capillary video by using optical flow estimation has been developed. An image registration function based on mutual information was used for stabilizing images in order to cope with slight finger movement during video acquisition. After image alignment, a skeleton extraction algorithm implemented by thinning was followed which enabled tracking blood flow entirely in arteriolar and venular limbs, and the curved segment as well. Optical flow and cross-correlation approaches were applied individually for velocity estimation of twelve microcirculation videos acquired independently from three healthy volunteers. The RBC velocity of 12 vessels at three given measurement sites (arteriolar, curve and venular sites) in a 45-second period of occlusion-release condition of vessel were examined. There were four stages of flow conditions: resting (T(1)), pre-occlusion (T(2)), post-occlusion (T(3)) and release (T(4)). The results from both approaches revealed that the velocity difference among the three sites were not significant. The pattern of distribution of RBC velocity was also reported. The correlation coefficient (r) of the velocity calculated using optical flow and cross-correlation in four stages of blood flow conditions and the overall correlation were: 1-window: r(T1)=0.68, r(T2)=0.67, r(T3)=0.92, r(T4)=0.88 and r(All)=0.79; 2-window: r(T1)=0.84, r(T2)=0.88, r(T3)=0.87, r(T4)=0.93 and r(All)=0.88. The averaged velocity results showed no significant differences between optical flow and 2-window cross-correlation in all flow conditions. Optical flow estimation is not only independent to the direction of flow, but also able to calculate the intensity displacement of all pixels. The proposed velocity measurement system has been shown to provide complete velocity information for the whole vessel limb which demonstrates the advantage of measuring blood flow at the level of microcirculation more accurately.
Asunto(s)
Velocidad del Flujo Sanguíneo/fisiología , Capilares/fisiología , Eritrocitos/fisiología , Microscopía por Video/métodos , Uñas/irrigación sanguínea , Algoritmos , Arteriolas/fisiología , Humanos , Interpretación de Imagen Asistida por Computador , Microcirculación , Angioscopía Microscópica , Reproducibilidad de los Resultados , Vénulas/fisiologíaRESUMEN
A 3-dimensional (3D) optical flow program that includes a multi-resolution feature has been developed and applied to 3D anatomical structure and gross tumor volume (GTV) contour mapping for 4-dimensional (4D) CT data. The study includes contour mapping for 3 real patient CT data sets, and also for a thoracic phantom in which the displacement for each voxel is known. Of the real patient CT data sets, one set has been used to map contours of lung and GTV over all the respiration phases, while the others were studied using only the end inspiration and end expiration phases, in which the displacement between the phases were the largest. Including the residual motion in the 4D CT data and motion table shaking, the optical flow calculation agrees to within 1 mm with the known displacement. Excluding those errors that are not introduced by optical flow algorithm, the agreement can be within 0.1 mm with a displacement magnitude of 24 mm. The mapped contours of lungs, liver, esophagus, GTV, etc. in real patient 4D CT images were acceptable to clinicians. The 3D optical flow program is a good tool for anatomical structure and tumor volume contour mapping across 4D CT scans.
Asunto(s)
Imagenología Tridimensional/métodos , Radiometría/métodos , Planificación de la Radioterapia Asistida por Computador/métodos , Radioterapia Conformacional/métodos , Neoplasias Torácicas/diagnóstico por imagen , Neoplasias Torácicas/radioterapia , Tomografía Computarizada por Rayos X/métodos , Simulación por Computador , Humanos , Modelos Biológicos , Interpretación de Imagen Radiográfica Asistida por Computador/métodosRESUMEN
The purpose of this paper is to validate a dose mapping program using optical flow method (OFM), and to demonstrate application of the program in radiotherapy follow-up evaluation. For the purpose of validation, the deformation matrices between four-dimensional (4D) CT data of different simulated respiration phases of a phantom were calculated using OFM. The matrices were then used to map doses of all phases to a single-phase image, and summed in equal time weighting. The calculated dose should closely represent the dose delivered to the moving phantom if the deformation matrices are accurately calculated. The measured point doses agreed with the OFM calculations better than 2% at isocenters, and dose distributions better than 1mm for the 50% isodose line. To demonstrate proof-of-concept for the use of deformable image registration in dose mapping for treatment evaluation, the treatment-planning CT was registered with the post-treatment CT image from the positron emission tomography (PET)/CT resulting in a deformation matrix. The dose distribution from the treatment plan was then mapped onto the restaging PET/CT using the deformation matrix. Two cases in which patients had thoracic malignancies are presented. Each patient had CT-based treatment planning for radiotherapy and restaging fluorodeoxy glucose (FDG)-PET/CT imaging 4-6 weeks after completion of treatments. Areas of pneumonitis and recurrence were identified radiographically on both PET and CT restaging images. Local dose and standard uptake values for pneumonitis and recurrence were studied as a demonstration of this method. By comparing the deformable mapped dose to measurement, the treatment evaluation method which is introduced in this manuscript proved to be accurate. It thus provides a more accurate analysis than other rigid or linear dose-image registration when used in studying treatment outcome versus dose.
Asunto(s)
Imagenología Tridimensional/métodos , Modelos Biológicos , Interpretación de Imagen Radiográfica Asistida por Computador/métodos , Radiometría/métodos , Planificación de la Radioterapia Asistida por Computador/métodos , Radioterapia Asistida por Computador/métodos , Carga Corporal (Radioterapia) , Simulación por Computador , Estudios de Seguimiento , Humanos , Dosificación Radioterapéutica , Efectividad Biológica Relativa , Reproducibilidad de los Resultados , Sensibilidad y Especificidad , Tomografía Computarizada por Rayos X/métodosRESUMEN
The far cortical locking (FCL) system, a novel bridge-plating technique, aims to deliver controlled and symmetric interfragmentary motion for a potential uniform callus distribution. However, clinical data for the practical use of this system are limited. The current study investigated the biomechanical effect of a locking plate/far cortical locking construct on a simulated comminuted diaphyseal fracture of the synthetic bones at different distance between the plate and the bone. Biomechanical in vitro experiments were performed using composite sawbones as bone models. A 10-mm osteotomy gap was created and bridged with FCL constructs to determine the construct stiffness, strength, and interfragmentary movement under axial compression, which comprised one of three methods: locking plates applied flush to bone, at 2â¯mm, or at 4â¯mm from the bone. The plate applied flush to the bone exhibited higher stiffness than those at 2â¯mm and 4â¯mm plate elevation. A homogeneous interfragmentary motion at the near and far cortices was observed for the plate at 2â¯mm, whereas a relatively large movement was observed at the far cortex for the plate applied at 4â¯mm. A plate-to-bone distance of 2â¯mm had the advantages of reducing axial stiffness and providing nearly parallel interfragmentary motion. The plate flush to the bone prohibits the dynamic function of the far cortical locking mechanism, and the 4-mm offset was too unstable for fracture healing.
Asunto(s)
Placas Óseas , Fijación Interna de Fracturas/instrumentación , Tornillos Óseos , Diáfisis/lesiones , Diáfisis/cirugía , HumanosRESUMEN
Headless compression screws (HCSs) are commonly used to fixate small bones and articular fractures. Understanding the biomechanical efficacy of different HCS designs can help surgeons make proper interfragmentary compression when a specific implant is chosen. HCSs with three different central shaft designs (unthreaded, fully threaded, and partially threaded) were studied: the Herbert-Whipple, Mini-Acutrak 2, and headless reduction (HLR). Polyurethane foam blocks were machined with a simulated fracture gap of 0.5 mm and set onto a custom-made jig to simultaneously measure compression force and driving torque during screw insertion. The maximal achievable compression forces and driving torques recorded were 47.4 ± 0.9 N and 145.11 ± 1.65 N mm for the HLR, 50.98 ± 1.29 N and 152.62 ± 2.83 N mm for the Mini-Acutrak 2, and 19.33 ± 1.0 N and 33.4 ± 2.2 N mm for the Herbert-Whipple. Overall, the compression force of the Mini-Acutrak 2 and HLR increased with the torque. Unlike the other screws, the Herbert-Whipple's driving torque increased while the compression force decreased after peak compression force was achieved. The partially threaded shaft design (HLR) demonstrated equivalent biomechanical advantage with the Mini-Acutrak 2 in interfragmentary compression. The HCSs with cone-shaped proximal ends (HLR and Mini-Acutrak 2) maintained their compression force during over-fastening, whereas the unthreaded central shaft of the Herbert-Whipple screw caused it to lose compression force.
Asunto(s)
Tornillos Óseos , Simulación por Computador , Fijación Interna de Fracturas/métodos , Fracturas Óseas/cirugía , Fracturas Intraarticulares/cirugía , Fenómenos Biomecánicos , Humanos , Poliuretanos , PresiónRESUMEN
The purpose of this study was to develop a biofeedback tilt-table for automatic tilt-table training, helping patients with spinal cord injury (SCI) to recover more rapidly from orthostatic hypotension, and increasing safety to avoid syncope during training. This biofeedback tilt-table implemented automatic training maneuvers and included three closed feedback loops to monitor the acquisition of physiological signals from patients and the feedback of presyncope symptoms (PS) to regulate the angle of tilt. The results of clinical testing revealed that the mean blood pressure and oxygen saturation represented the most useful physiological signals for determining PS feedback and the quantitative criteria adopted were practicable and useful in describing the level of PS. This novel biofeedback tilt-table system offered higher patient throughput, faster training and safety in training of SCI patients to overcome their orthostatic hypotension than traditional tilt-table training, and could provide quantitative information of PS to assist medical staff in studying the mechanism of orthostatic syncope.
Asunto(s)
Ingeniería Biomédica/métodos , Hipotensión Ortostática/rehabilitación , Modalidades de Fisioterapia/instrumentación , Traumatismos de la Médula Espinal/rehabilitación , Adulto , Biorretroalimentación Psicológica , Diseño de Equipo , Femenino , Humanos , Hipotensión Ortostática/etiología , Masculino , Persona de Mediana Edad , Postura , Traumatismos de la Médula Espinal/complicaciones , Pruebas de Mesa Inclinada/instrumentaciónRESUMEN
Headless compression screws (HCSs) are commonly utilized devices for small bone fracture fixation. The Mini-Acutrak 2 and headless reduction (HLR) screws are the newer version types, in which both have fully threaded and variable pitch design. Specifically, the HLR is characterized by two thread runouts to facilitate implantation. With the thread runouts, the holding strength of the screw may be compromised. To the best of our knowledge, no study has examined the pullout force of the global sizes of a HCS. We sought to determine the pullout strength of the HLR and compare the strength of this screw with that of the Mini-Acutrak 2. Synthetic bone blocks with simulated transverse fractures were used to conduct the tests. Four commonly used sizes of the HLR were examined, and one Mini-Acutrak 2 was employed for comparison. Five screws of each size were tested. The pullout force of all screws that were tested in this study ranged from 45.23 to 233.22 N. The results revealed that the pullout force increased as the screw diameter increased. Interestingly, we found that one small screw outperformed the Mini-Acutrak 2, which has a larger diameter. This study provided extensive knowledge regarding the pullout strength of fully threaded HCSs of different sizes. An unexpected finding is that a small screw has higher holding power than a large one because of its increased number of threads. Therefore, we suggest that the thread number should be a critical consideration for the design of size distribution of HCSs.