Tunable Construction of Chiral Nematic Cellulose Nanocrystals/ZnO Films for Ultra-Sensitive, Recyclable Sensing of Humidity and Ethanol.

The investigation of functional materials derived from sustainable and eco-friendly bioresources has generated significant attention. Herein, nanocomposite films based on chiral nematic cellulose crystals (CNCs) were developed by incorporating xylose and biocompatible ZnO nanoparticles (NPs) via evaporation-induced self-assembly (EISA). The nanocomposite films exhibited iridescent color changes that corresponded to the birefringence phenomenon under polarized light, which was attributed to the formation of cholesteric structures. ZnO nanoparticles were proved to successfully adjust the helical pitches of the chiral arrangements of the CNCs, resulting in tunable optical light with shifted wavelength bands. Furthermore, the nanocomposite films showed fast humidity and ethanol stimuli response properties, exhibiting the potential of stimuli sensors of the CNC-based sustainable materials.

Impact Dynamics of a Droplet on Superhydrophobic Cylinders Structured with a Macro Ridge.

Reducing the contact time of a droplet hitting a solid surface is crucial for many situations. In this work, the dynamic behavior of a low-viscosity droplet on a superhydrophobic surface, which consists of a cylindrical substrate and a macro ridge placed axially on the peak, was numerically investigated via the lattice Boltzmann method. The focus was given to the spreading and the detaching morphology of the droplet at the Weber number We = 0.84-37.8 and the cylinder-to-droplet radius ratio R* = 0.57-5.71. The ridge is found to redistribute the droplet mass and affect the impact outcomes, as well as the contact time. For each R*, a jug rebound, a stretched rebound straddling the ridge, and a split detachment occur sequentially with the increasing We. When R* does not exceed 1.71, the contact time decreases continuously with the increase in We. With R* being taken between 1.71 and 5.14, the contact time initially reduces with We and plateaus after We reaches 10.3. Once R* exceeds 5.14, the split droplets may present as a bestriding shape at We > 30.3 rather than the regular jug shape with a small We. The contact time would be decreased to a second plateau in this case. In most cases, the contact time can be shortened effectively for the droplet on a ridged cylinder compared with that of a smooth cylinder.

Contact Time of a Droplet Off-Centered Impacting a Superhydrophobic Cylinder.

Extensive research has shown that a superhydrophobic cylindrical substrate could lead to a noncircumferential symmetry of an impacting droplet, reducing the contact time accordingly. It is of practical significance in applications, such as anti-icing, anticorrosion, and antifogging. However, few accounts have adequately addressed the off-centered impact of the droplet, despite it being more common in practice. This work investigates the dynamic behavior of a droplet off-centered impacting a superhydrophobic cylinder via the lattice Boltzmann method. The effect of the off-centered distance is primarily discussed for droplets taking various Weber numbers and cylinder sizes. The results show that the imposition of an off-center distance can further disrupt the droplet symmetry during the impact. As the off-center distance increases, the droplet movement is gradually tilted toward the offset side until it tangentially passes the cylinder side, resulting in a direct dripping mode. The dynamic features, focusing mainly on maximum spreading in the axial direction and contact time, are specifically explored. A quantitative model of the maximum spreading factor is proposed based on the equivalent transformation from the off-center impact into oblique hitting, considering the full range of off-centered distance. A preliminary contact time model is established for droplet off-centered impacting superhydrophobic cylinders by substituting the maximum spreading and the effective velocity of the liquid moving. This work aims to make an original contribution to the fundamental knowledge of droplet impact and could be of value for related applications.

Effect of Asymmetry on the Contact Time of Droplet Impact on Superhydrophobic Cylindrical Surfaces.

Reducing the contact time during the droplet impact on the surface is crucial for anti-icing, self-cleaning, and heat transfer optimization applications. This study aims to minimize the contact time by modifying the surface curvature to create an asymmetric impact process. Our experiments showed that the increase in Weber numbers (We) and the decrease in the ratio of surface diameter to droplet diameter (D*) intensify the asymmetry of the impact process, yielding four distinct rebound modes. Low asymmetry observes the liquid retract toward the central point (Rebound Modes 1 and 2), whereas high asymmetry yields a wing-like rebound (Rebound Modes 3 and 4). In Rebound Mode 1, increased asymmetry would lead to more extended contact due to the prolonged waiting period. Conversely, the reduction in contact time in Rebound Mode 2 occurs due to increased asymmetry with no waiting period. For Rebound Modes 3 and 4, the retraction time could be divided into three stages, generated by two liquid detachment modes from the surface. Analysis reveals that an increased asymmetry would reduce the retraction time during the first stage but prolong it during the third stage, with no significant effects on the second. Four correlations, each pertaining to a distinct impact mode, are proposed based on these analyses to describe the contact time concerning We and D* for droplets impacting a superhydrophobic cylindrical surface.

Comprehensive transcriptomic profiling and mutational landscape of primary gastric linitis plastica.

BACKGROUND: Primary gastric linitis plastica (GLP) is a distinct phenotype of gastric cancer with poor survival. Comprehensive molecular profiles and putative therapeutic targets of GLP remain undetermined. METHODS: We subjected 10 tumor-normal tissue pairs to whole exome sequencing (WES) and whole transcriptome sequencing (WTS). 10 tumor samples were all GLP which involves 100% of the gastric wall macroscopically. TCGA data were compared to generate the top mutated genes and the overexpressed genes in GLP. RESULTS: Our results reveal that GLP has distinctive genomic and transcriptomic features, dysfunction in the Hippo pathway is likely to be a key step during GLP development. 6 genes were identified as significantly highly mutated genes in GLP, including AOX1, ANKRD36C, CPXM1, PTPN14, RPAP1, and DCDC1). MUC6, as a previously identified gastric cancer driver gene, has a high mutation rate (20%) in GLP. 20% of patients in our GLP cohort had CDH1 mutations, while none had RHOA mutations. GLP exhibits high immunodeficiency and low AMPK pathway activity. Our WTS results showed that 3 PI3K-AKT pathway-related genes (PIK3R2, AKT3, and IGF1) were significantly up-regulated in GLP. Two genes were identified using immunohistochemistry (IHC), IGF2BP3 and MUC16, which specifically expressed in diffuse-type-related gastric cancer cell lines, and its knockdown inhibits PI3K-AKT pathway activity. CONCLUSIONS: We provide the first integrative genomic and transcriptomic profiles of GLP, which may facilitate its diagnosis, prognosis, and treatment.

Impact Dynamics of a Single Droplet on Hydrophobic Cylinders: A Lattice Boltzmann Study.

This study numerically investigates the effects of the Weber number (We) and cylinder-to-droplet radius ratio (R*) on the impact dynamics of a low-viscosity droplet on a hydrophobic cylinder by the lattice Boltzmann method. The intrinsic contact angle of the surface is chosen as θ0 = 122°± 2°, which ensures a representative hydrophobicity. The regime diagram of the impact dynamics in the parameter space of We versus R* is established with categories of split and nonsplit regimes. The droplet would split during impact as α = We/R* exceeds a critical value. In the nonsplit regime, the droplet bounces off the cylinder at most Weber numbers unless the impact velocity is minuscule (We < 2). The contact time of the droplet on the cylinder surface decreases with increasing R* or decreasing We, indicating bouncing is facilitated under such conditions. This can be explained by the suppressed adhesion dissipation between the droplet and surface due to a reduction in the contact area. In the split regime, sufficient kinetic energy inside the impacting droplet determines whether the whole droplet could detach from the surface. With a small cylinder (R* < 0.83) and large We (>25), the adhesion effect is weakened for the side fragments because of the small contact area, and it facilitates the dripping of fragments. For other conditions, the detachment, especially for the tiny droplet on the cylinder top, only occurs if the deformation is prominent at We > 35. Moreover, the spreading dynamics of the impacting droplet are also highlighted in this work.

Golgi scaffold protein PAQR3 as a candidate suppressor of gastric cardia adenocarcinoma via regulating TGF-ß/Smad pathway.

OBJECTIVES: To investigate the function of PAQR3 in gastric cardia adenocarcinoma (GCA) and understand the possible mechanism of PAQR3 in regulating epithelial-mesenchymal transition (EMT). METHODS: We detected PAQR3 protein in 146 GCA tissues and paired normal adjacent tissues (PNTs) specimens using immunohistochemical analysis, and explored its clinical significance. The expression levels of PAQR3 protein in 20 GCA tissues, their paired PNTs, HGC27, SGC7901, and GES-1 cells were analyzed by Western blot. Wild-type PAQR3 was overexpressed in HGC27 cells. The effects of PAQR3 overexpression on the function of HGC27 cells and its underlying mechanisms were then analyzed through a series of cell and molecular biology experiments. RESULTS: PAQR3 was significantly down-regulated in GCA tissues when compared with paired PNTs (p < 0.0001). The expression level of PAQR3 in GCA tissues was significantly negatively correlated with Helicobacter pylori infection (p = 0.000), venous invasion (p = 0.000), invasion depth (p = 0.000), lymph node metastasis (p = 0.022), tumor stage (p = 0.000), and patient survival (p = 0.009). Downregulation of PAQR3 was highly correlated with increased EMT signature and activated TGF-ß/Smad pathway in GCA tissues. Overexpression of PAQR3 in HGC27 cells negatively regulates its cellular functions, such as cell proliferation and migration, and suppresses EMT. Mechanistically, overexpression of PAQR3 significantly down-regulates the protein expression levels of TGF-1, p-Smad2, and p-Smad3 in HGC27 cells. CONCLUSION: PAQR3 was significantly down-regulated in GCA tissues, HGC27, and SGC7901 cells. PAQR3 significantly inhibits the proliferation, migration, and invasion of HGC27 cells. Mechanistically, PAQR3 can inhibit the EMT process in HGC27 cells by regulating TGF-ß/Smad signaling pathway.

Supramolecular Deconstruction of Bamboo Holocellulose via Hydrothermal Treatment for Highly Efficient Enzymatic Conversion at Low Enzyme Dosage.

Hydrothermal pretreatment (HTP) has long been considered as an efficient and green treatment process on lignocellulosic biomass for bioconversion. However, the variations of cellulose supramolecular structures during HTP as well as their effects on subsequent enzymatic conversion are less understood. In this work, bamboo holocellulose with well-connected cellulose and hemicelluloses polysaccharides were hydrothermally treated under various temperatures. Chemical, morphological, and crystal structural determinations were performed systematically by a series of advanced characterizations. Xylan was degraded to xylooligosaccharides in the hydrolyzates accompanied by the reduced degree of polymerization for cellulose. Cellulose crystallites were found to swell anisotropically, despite the limited decrystallization by HTP. Hydrogen bond linkages between cellulose molecular chains were weakened due to above chemical and crystal variations, which therefore swelled, loosened, and separated the condensed cellulose microfibrils. Samples after HTP present notably increased surface area, favoring the adsorption and subsequent hydrolysis by cellulase enzymes. A satisfying enzymatic conversion yield (>85%) at rather low cellulase enzyme dosage (10 FPU/g glucan) was obtained, which would indicate new understandings on the green and efficient bioconversion process on lignocellulosic biomass.

Preparation and Characterization of Degradable Cellulose-Based Paper with Superhydrophobic, Antibacterial, and Barrier Properties for Food Packaging.

A great paradigm for foremost food packaging is to use renewable and biodegradable lignocellulose-based materials instead of plastic. Novel packages were successfully prepared from the cellulose paper by coating a mixture of polylactic acid (PLA) with cinnamaldehyde (CIN) as a barrier screen and nano silica-modified stearic acid (SA/SiO2) as a superhydrophobic layer. As comprehensively investigated by various tests, results showed that the as-prepared packages possessed excellent thermal stability attributed to inorganic SiO2 incorporation. The excellent film-forming characteristics of PLA improved the tensile strength of the manufactured papers (104.3 MPa) as compared to the original cellulose papers (70.50 MPa), enhanced by 47.94%. Benefiting from the rough nanostructure which was surface-modified by low surface energy SA, the contact angle of the composite papers attained 156.3°, owning superhydrophobic performance for various liquids. Moreover, the composite papers showed excellent gas, moisture, and oil bacteria barrier property as a result of the reinforcement by the functional coatings. The Cobb300s and WVP of the composite papers were reduced by 100% and 88.56%, respectively, and their antibacterial efficiency was about 100%. As the novel composite papers have remarkable thermal stability, tensile strength, and barrier property, they can be exploited as a potential candidate for eco-friendly, renewable, and biodegradable cellulose paper-based composites for the substitute of petroleum-derived packages.

Janus Biopolymer Sponge with Porous Structure Based on Water Hyacinth Petiole for Efficient Solar Steam Generation.

Solar-driven steam generation for desalination is a facile, sustainable, and energy-saving approach to produce clean freshwater. However, the complicated fabrication process, high cost, potential environmental impact, and salt crystallization of conventional evaporators limit their large-scale application. Herein, we present a sustainable Janus evaporator based on a biopolymer sponge from the water hyacinth petiole (WHP) for high-performance solar steam generation. The freeze-dried WHP maintained its original porous structure and aligned channels well, and therefore holds the capability for rapid water transport due to strong capillary action. The WHP coated with carbon nanotubes/ethyl cellulose paste on its surface (WHP-C) gains a good photothermal property, thus achieving an efficient solar steam generation with a rate of 1.50 kg m-2 h-1 under 1 sun irradiation. Moreover, the WHP-C after hydrophobic modification by fluorocarbon (WHP-CH) is endowed with high water repellency and exhibits good salt resistance during long-term solar desalination. Additionally, we demonstrate that a stable wet surface that enables efficient water supply and vapor escape is also significant to the successive desalination of a solar evaporator. Our work provides new insights into the high-value utilization of biomass waste, i.e., water hyacinth, and the development of sustainable interfacial solar evaporators for the environmentally friendly production of freshwater.

Enzyme-Responsive Aqueous Two-Phase Systems in a Cationic-Anionic Surfactant Mixture.

Enzyme-instructed self-assembly is an increasingly attractive topic owing to its broad applications in biomaterials and biomedicine. In this work, we report an approach to construct enzyme-responsive aqueous surfactant two-phase (ASTP) systems serving as enzyme substrates by using a cationic surfactant (myristoylcholine chloride) and a series of anionic surfactants. Driven by the hydrophobic interaction and electrostatic attraction, self-assemblies of cationic-anionic surfactant mixtures result in biphasic systems containing condensed lamellar structures and coexisting dilute solutions, which turn into homogeneous aqueous phases in the presence of hydrolase (cholinesterase). The enzyme-sensitive ASTP systems reported in this work highlight potential applications in the active control of biomolecular enrichment/release and visual detection of cholinesterase.

Rebound Behaviors of Multiple Droplets Simultaneously Impacting a Superhydrophobic Surface.

The rebound behaviors of multiple droplets simultaneously impacting a superhydrophobic surface were investigated via lattice Boltzmann method (LBM) simulations. Three rebound regions were identified, i.e., an edge-dominating region, a center-dominating region, and an independent rebound region. The occurrence of the rebound regions strongly depends on the droplet spacing and the associated Weber and Reynolds numbers. Three new rebound morphologies, i.e., a pin-shaped morphology, a downward comb-shaped morphology, and an upward comb-shaped morphology, were presented. Intriguingly, in the edge-dominating region, the central droplets experience a secondary wetting process to significantly prolong the contact time. However, in the center-dominating region, the contact time is dramatically shortened because of the strong interactions generated by the central droplets and the central ridges. These findings provide useful information for practical applications such as self-cleaning, anticorrosion, anti-icing, and so forth.

Circulating methylated THBS1 DNAs as a novel marker for predicting peritoneal dissemination in gastric cancer.

OBJECTIVES: Thrombospondin 1 (THBS1) is known to play a key role in tumor metastasis, and aberrant DNA methylation is one of the mechanisms regulating THBS1. The present study investigated whether methylated THBS1 in circulating cell-free DNA from preoperative peritoneal lavage fluid (PPLF) and peripheral blood could be used as a potential biomarker for predicting peritoneal dissemination in gastric cancer (GC) patients. METHODS: The status of THBS1 methylation was detected by quantitative methylation-specific PCR (MSP) in tumor tissues, paired PPLF, and serum from 92 GC patients. The correlation between methylated THBS1 levels and peritoneal dissemination of GC was studied, and its diagnostic value for predicting peritoneal dissemination was clarified by the receiver operating characteristic (ROC) curve. RESULTS: Aberrant THBS1 methylation in tumor tissues was significantly higher than that in paracancerous normal tissues (p < 0.0001). No THBS1 methylation was found in 40 healthy controls, and partial methylation was detected in 3 of 48 patients with chronic non-atrophic gastritis. The frequency of THBS1 methylation in pairing PPLF and serum from 92 GC patients was 52.2% (48/92) and 58.7% (54/92), respectively. The results of methylated THBS1 in pairing PPLF and serum were similar to those of tumor tissues. Aberrant THBS1 methylation in tumor tissues and pairing PPLF or serum was closely related to peritoneal dissemination, tumor progression, and poor prognosis (all p < 0.0001). CONCLUSION: Circulating methylated THBS1 DNAs in PPLF/serum may predict peritoneal dissemination, a potential poor prognostic factor for GC patients.

Atomic Resolution of Cotton Cellulose Structure Enabled by Dynamic Nuclear Polarization Solid-State NMR.

The insufficient resolution of conventional methods has long limited the structural elucidation of cellulose and its derivatives, especially for those with relatively low crystallinities or in native cell walls. Recent 2D/3D solid-state NMR studies of 13C uniformly labeled plant biomaterials have initiated a re-investigation of our existing knowledge in cellulose structure and its interactions with matrix polymers but for unlabeled materials, this spectroscopic method becomes impractical due to limitations in sensitivity. Here, we investigate the molecular structure of unlabeled cotton cellulose by combining natural abundance 13C-13C 2D correlation solid-state NMR spectroscopy, as enabled by the sensitivity-enhancing technique of dynamic nuclear polarization (DNP), with statistical analysis of the observed and literature-reported chemical shifts. The atomic resolution allows us to monitor the loss of Iα and Iß allomorphs and the generation of a novel structure during ball-milling, which reveals the importance of large crystallite size for maintaining the Iα and Iß model structures. Partial order has been identified in the "disordered" domains, as evidenced by a discrete distribution of well-resolved peaks. This study not only provides heretofore unavailable high-resolution insights into cotton cellulose but also presents a widely applicable strategy for analyzing the structure of cellulose-rich materials without isotope-labeling. This work was part of a multi-technique study of ball-milled cotton described in the previous article in the same issue.

Characterization of the Micromorphology and Topochemistry of Poplar Wood during Mild Ionic Liquid Pretreatment for Improving Enzymatic Saccharification.

Ionic liquids (ILs) as designer solvents have been applied in biomass pretreatment to increase cellulose accessibility and therefore improve the enzymatic hydrolysis. We investigated the characterization of the micromorphology and the topochemistry of poplar wood during 1-ethyl-3-methylimidazolium acetate pretreatment with mild conditions (90 °C for 20 and 40 min) by multiple microscopic techniques (FE-SEM, CLSM, and CRM). Chemical composition analysis, XRD, cellulase adsorption isotherm, and enzymatic hydrolysis were also performed to monitor the variation of substrate properties. Our results indicated that the biomass conversion was greatly enhanced (from 20.57% to 73.64%) due to the cell wall deconstruction and lignin dissolution (29.83% lignin was removed after incubation for 40 min), rather than the decrystallization or crystallinity transformation of substrates. The mild ILs pretreatment, with less energy input, can not only enhance enzymatic hydrolysis, but also provide a potential approach as the first step in improving the sequential pretreatment effectiveness in integrated methods. This study provides new insights on understanding the ILs pretreatment with low temperature and short duration, which is critical for developing individual and/or combined pretreatment technologies with reduced energy consumption.

Systematic pan-cancer analyses of the potential function of the Golgi scaffold protein PAQR3.

Progesterone and AdipoQ Receptor 3 (PAQR3) is a member of the AdipoQ receptor. Our previous studies have found that PAQR3 plays a role as a candidate inhibitor in cardiac adenocarcinoma, breast cancer, gastric cancer and colorectal cancer, but the systematic analysis of PAQR3 in tumors is currently lacking. The objective of this study was to investigate the prognostic and therapeutic value of PAQR3 in 31 tumors. Through the analysis of TCGA, UALCAN, GEO, GEPIA2, TIMER, Kaplan-Meier plotter, TISIDB and other databases, it was found that the expression level of PAQR3 changed significantly in different tumor types, and the expression level of Neuroblastoma was very high. And the level of Prostate adenocarcinoma is low. In addition, the expression level of PAQR3 in Cholangiocarcinoma, Esophageal carcinoma, Head and neck squamous carcinoma, Liver Hepatocellular Carcinoma, Lung Adenocarcinoma and Lung squamous cell carcinoma was significantly higher than that in normal tissues. However, the expression level of PAQR3 in Breast Cancer, Kidney Renal Clear Cell Carcinoma, Kidney renal papillary cell carcinoma, Prostate Adenocarcinoma, Rectum Adenocarcinoma, Thyroid Cancer and Uterine Corpus Endometrial Carcinoma was lower than that in normal tissues. Subsequently, we explored the value of PAQR3 as a prognostic indicator of cancer. In Acute Myeloid Leukemia, Lower-grade Glioma and Glioblastoma, Pediatric Low-grade Gliomas, Kidney Chromophobe, and Thyroid Cancer, PAQR3 expression was positively correlated with OS and DSS, while in Rectum Adenocarcinoma, PAQR3 expression was negatively correlated with OS. PAQR3 high expression group Lower-grade Glioma and Glioblastoma, Pediatric Low-grade Gliomas, Uveal Melanoma, Kidney Chromophobe and DFI were positively correlated. PAQR3 can be used as a risk factor for the prognosis of multiple tumors. Then, we discussed the correlation between PAQR3 and immunology, and found that PAQR3 has a wide range of mutations in various tumor types, the most common mutation type is missense mutation, and common mutation types also include amplification, depth deletion, splicing, truncation and structural variation. Among the tumor samples with PAQR3 alterations, mutation occurred in all tumor samples except prostate adenocarcinoma and adrenal cortical carcinoma, head and neck squamous cell carcinoma, brain low-grade glioma, and kidney clear cell carcinoma, while esophageal adenocarcinoma had the highest total alteration frequency. PAQR3 was strongly associated with CNV in 18 tumors, particularly in Ovarian cancer, Lung squamous cell carcinoma, and Adenoid cystic carcinoma. On the other hand, PAQR3 has a higher SNV frequency in Uterine Corpus Endometrial Carcinoma, Skin Cutaneous Melanoma and Lung Adenocarcinoma, among which Uterine Corpus Endometrial Carcinoma has the highest SNV frequency. These results showed that PAQR3 expression levels were significantly correlated with tumor mutation load, microsatellite instability, neoantigens, and purity. In summary, PAQR3 can affect the tumor microenvironment and has potential for chemotherapy. Finally, we investigated the role of PAQR3 in tumor resistance and found that the expression of PAQR3 affects the efficacy of multiple chemotherapy drugs. Based on these studies, we found that PAQR3 plays an important role in cancer and has potential in tumor diagnosis and prognosis.

A novel seawater hydrothermal-deep eutectic solvent pretreatment enhances the production of fermentable sugars and tailored lignin nanospheres from Pinus massoniana.

Lignocellulose biorefinery depended on effective pretreatment strategies is of great significance for solving the current global crisis of ecosystem and energy security. This study proposes a novel approach combining seawater hydrothermal pretreatment (SHP) and microwave-assisted deep eutectic solvent (MD) pretreatment to achieve an effective fractionation of Pinus massoniana into high value-added products. The results indicated that complex ions (Mg2+, Ca2+, and Cl-) in natural seawater served as Lewis acids and dramatically promoted the depolymerization of mannose and xylan into oligosaccharides with 40.17 % and 75.43 % yields, respectively. Subsequent MD treatment realized a rapid and effective lignin fractionation (~90 %) while retaining cellulose. As a result, the integrated pretreatment yielded ~85 % of enzymatic glucose, indicating an eightfold increase compared with untreated pine. Because of the increased hydrophobicity induced by the formation of acyl groups during MD treatment, uniform lignin nanospheres were successfully recovered from the DES. It exhibited low dispersibility (PDI = 2.23), small molecular weight (1889 g/mol), and excellent oxidation resistance (RSI = 5.94), demonstrating promising applications in functional materials. The mechanism of lignin depolymerization was comprehensively elucidated via FTIR, 2D-HSQC NMR, and GPC analyses. Overall, this study provides a novel and environmentally friendly strategy for lignocellulose biorefinery and lignin valorization.

Insights into the poplar cell wall deconstruction following deep eutectic solvent pretreatment for enhanced enzymatic saccharification and lignin valorization.

In this study, a combination of microcosmic and chemical analysis methods was used to investigate deep eutectic solvent (DES) pretreatment effects on cell wall's micromorphology and lignin's dissolution regular, in order to achieve high-performance biorefinery. The atomic force microscope observed that DES pretreatment peeled off non-cellulose components to reduced "anti-degradation barrier", resulting to improve the enzymatic saccharification from 12.36 % to 90.56 %. In addition, DES pretreatment can break the ß-O-4 bond between the lignin units resulting in a decline in molecular weight from 3187 g/mol to 1112 g/mol (0-6 h). However, long pretreatment time resulted regenerated lignin samples repolymerization. Finally, DES has good recoverability which showed saccharification still can reach 51.51 % at 6 h following four recycling rounds and regenerated lignin also had a typical and well-preserved structure. In general, this work offers important information for industrial biorefinery technologies and lignin valorization.

Biomimetic construction of environmental-tolerant composite hydrogels based on galactomannan for tough, flexible and conductive sensors.

Sustainable composite hydrogel materials with harsh environmental adaption and tolerance capability have received considerable interests but still remain as challenges. In this work, biomimetic strategy was adapted for construction of three-dimensional galactomannan (GM) hydrogels with intercalation of flexible polymer chains polyethyleneimine (PEI), biomacromolecules tannin acid (TA) and CeO2 nanoparticles (NPs). The hydrogels cross-linked with double-networks (DN) present not only pH-responsive water absorption property, but also boosted mechanical strength with highest toughness of 326 kJ/m3 and Young's modulus of 220 kPa. Self-healing and anti-freezing capabilities were revealed for the hydrogels by maintaining of fracture elongation (23 %) and fracture strength (250 kPa). TA, CeO2 NPs as well as the amide groups in PEI of the hydrogels introduced excellent bacterial prohibition performance on both Bacillus subtilis (B. subtilis) and Escherichia coli (E. coli). Also, due to the existence of the free ions, the hydrogels exhibited electric conductive properties, with wide-range high sensitivity and long-time conductive stability. In addition, various tensile strain degrees were related to the conductive resistance values, and the great recovery performance was proved by cyclic tensile-conductive tests for 3000 times. Therefore, the proposed GM-based hydrogels displayed great potentials as strain sensors that are adaptable and tolerant to various environmental conditions.