Direct angiographic comparison of different velocity-selective saturation, inversion, and DANTE labeling modules on cerebral arteries.

PURPOSE: This study evaluated the velocity-selective (VS) MRA with different VS labeling modules, including double refocused hyperbolic tangent, eight-segment B1-insensitive rotation, delay alternating with nutation for tailored excitation, Fourier transform-based VS saturation, and Fourier transform-based inversion. METHODS: These five VS labeling modules were evaluated first through Bloch simulations, and then using VSMRA directly on various cerebral arteries of healthy subjects. The relative signal ratios from arterial ROIs and surrounding tissues as well as relative arteria-tissue contrast ratios of different methods were compared. RESULTS: Double refocused hyperbolic tangent and eight-segment B1-insensitive rotation showed very similar labeling effects. Delay alternating with nutation for tailored excitation yielded high arterial signal but with residual tissue signal due to the spatial banding effect. Fourier transform-based VS saturation with half the time of other techniques serves as an efficient nonsubtractive VSMRA method, but the remaining tissue signal still obscured some small distal arteries that were delineated by other subtraction-based VSMRA, allowing more complete cancelation of static tissue. Fourier transform-based inversion produced the highest arterial signal in VSMRA with minimal tissue background. CONCLUSION: This is the first study that angiographically compared five different VS labeling modules. Their labeling characteristics on arteries and tissue and implications for VSMRA and VS arterial spin labeling are discussed.

Evaluating cerebrovascular reactivity measured by velocity selective inversion arterial spin labeling with different post-labeling delays: The effect of fast flow.

PURPOSE: Velocity selective arterial spin labeling (VSASL) quantification assumes that the labeled bolus continuously moves into the imaging voxel during the post-labeling delay (PLD). Faster blood flow could lead to a bolus duration shorter than the applied PLD of VSASL and cause underestimation of cerebral blood flow (CBF). This study aims to evaluate the performance of velocity-selective inversion (VSI) prepared arterial spin labeling (ASL) with different PLDs and pseudo-continuous ASL (PCASL) for quantification of hypercapnia-induced cerebrovascular reactivity (CVR), using phase-contrast (PC) MRI as a global reference. METHODS: We compared CVR obtained by VSI-ASL with PLD of 1520 ms (VSASL-1520), 1000 ms (VSASL-1000), and 500 ms (VSASL-500), PCASL with PLD of 1800 ms (PCASL-1800), and PC MRI on eight healthy volunteers at two sessions. RESULTS: Compared with PC MRI, VSASL-1520 produced significantly lower global CVR values, while PCASL-1800, VSASL-1000, and VSASL-500 yielded more consistent results. The reduced CVR in VSASL-1520 was more pronounced in carotid territories including frontal and temporal lobes than in vertebral territories such as the occipital lobe. This is largely caused by the underestimated perfusion during hypercapnia due to the reduced bolus duration being less than the PLD. CONCLUSION: Although VSASL offers certain advantages over spatially selective ASL due to its reduced susceptibility to delayed ATT, this technique is prone to biases when the ATT is excessively short. Therefore, a short PLD should be employed for reliable perfusion and CVR quantification in populations or conditions with fast flow.

Type-I Photodynamic Therapy Induced by Pt-Coordination of Type-II Photosensitizers into Supramolecular Complexes.

Platinum supramolecular complexes based on photosensitizers have garnered great interest in photodynamic therapy (PDT) due to Pt (II) centers as chemotherapeutic agents to eliminate tumor cells completely, which greatly improve the antitumor efficacy of PDT. However, in comparison to precursor photosensitizer ligand, the formed platinum supramolecular complexes typically exhibit inferior outcomes in terms of reactive oxygen species (ROS) generation. How to boost ROS generation in the formed platinum supramolecular complexes for enhanced PDT is an enticing yet highly challenging task. Here we report a Pt-coordination-based dimeric photosensitizer complex (Cz-BTZ-Py)2Pt(OTf)2. It is found that comparing with photosensitizer ligand Cz-BTZ-Py, the formed supramolecular complex exhibit redshifts of absorption wavelength as well as enhanced ROS generation efficiency. Moreover, type-I ROS generation (O2⋅-) is produced in the formed platinum supramolecular complexes mainly due to a reduced energy gap ΔEST resulting from exciton coupling between two photosensitizer ligands. And type-I ROS (O2⋅-) generation significantly amplifies the photodynamic therapy (PDT) outcomes. In vitro evaluation shows excellent photochemotherapy performance of (Cz-BTZ-Py)2Pt(OTf)2 nanoparticles. We anticipate this work would provide a novel approach to design type-I photosensitizers for efficient PDT.

Three Birds with One Stone: Multifunctional TiN-MXene-Co@CNTs Network as Sulfur/Lithium Host for High-Areal-Capacity Lithium-Sulfur Batteries.

The inevitable shuttling and slow redox kinetics of lithium polysulfides (LiPSs) as well as the uncontrolled growth of Li dendrites have strongly limited the practical applications of lithium-sulfur batteries (LSBs). To address these issues, we have innovatively constructed the carbon nanotubes (CNTs) encapsulated Co nanoparticles in situ grown on TiN-MXene nanosheets, denoted as TiN-MXene-Co@CNTs, which could serve simultaneously as both sulfur/Li host to kill "three birds with one stone" to (1) efficiently capture soluble LiPSs and expedite their redox conversion, (2) accelerate nucleation/decomposition of solid Li2S, and (3) induce homogeneous Li deposition. Benefiting from the synergistic effects, the TiN-MXene-Co@CNTs/S cathode with a sulfur loading of 2.5 mg cm-2 could show a high reversible specific capacity of 1129.1 mAh g-1 after 100 cycles at 0.1 C, and ultralong cycle life over 1000 cycles at 1.0 C. More importantly, it even achieves a high areal capacity of 6.3 mAh cm-2 after 50 cycles under a sulfur loading as high as 8.9 mg cm-2 and a low E/S ratio of 5.0 µL mg-1. Besides, TiN-MXene-Co@CNTs as Li host could deliver a stable Li plating/striping behavior over 1000 h.

Dynamic Modulation of Li2O2 Growth in Li-O2 Batteries through Regulating Oxygen Reduction Kinetics with Photo-Assisted Cathodes.

Widely acknowledged that the capacity of Li-O2 batteries (LOBs) should be strongly determined by growth behaviors of the discharge product of lithium peroxide (Li2O2) that follows both coexisting surface and solution pathways. However until now, it remains still challenging to achieve dynamic modulation on Li2O2 morphologies. Herein, the photo-responsive Au nanoparticles (NPs) supported on reduced oxide graphene (Au/rGO) have been utilized as cathode to manipulate oxygen reduction reaction (ORR) kinetics by aid of surface plasmon resonance (SPR) effects. Thus, we can experimentally reveal the importance of matching ORR kinetics with Li+ migration towards battery performance. Moreover, it is found that Li+ concentration polarization caused "sudden death" of LOBs is supposed to be just a form of suspended animation that could timely recover under irradiation. This work provides us an in-depth explanation on the working mechanism of LOBs from a kinetic perspective, offering valuable insights for the future battery design.

Test-retest reliability of 3D velocity-selective arterial spin labeling for detecting normal variations of cerebral blood flow.

Velocity-selective inversion (VSI) based velocity-selective arterial spin labeling (VSASL) has been developed to measure cerebral blood flow (CBF) with low susceptibility to the prolonged arterial transit time and high sensitivity to brain perfusion signal. The purpose of this magnetic resonance imaging study is to evaluate the test-retest reliability of a VSI-prepared 3D VSASL protocol with whole-brain coverage to detect baseline CBF variations among cognitively normal participants in different brain regions. Coefficients of variation (CoV) of both absolute and relative CBF across scans or sessions, subjects, and gray matter regions were calculated, and corresponding intraclass correlation coefficients (ICC) were computed. The higher between-subject CoV of absolute CBF (13.4 ± 2.0%) over within-subject CoV (within-session: 3.8 ± 1.1%; between-session: 4.9 ± 0.9%) yielded moderate to excellent ICC (within-session: 0.88±0.08; between-session: 0.77±0.14) to detect normal variations of individual CBF. The higher between-region CoV of relative CBF (11.4 ± 3.0%) over within-region CoV (within-session: 2.3 ± 0.9%; between-session: 3.3 ± 1.0%) yielded excellent ICC (within-session: 0.92±0.06; between-session: 0.85±0.12) to detect normal variations of regional CBF. Age, blood pressure, end-tidal CO2, and hematocrit partially explained the variability of CBF across subjects. Together these results show excellent test-retest reliability of VSASL to detect both between-subject and between-region variations supporting its clinical utility.

Enhancement of TKI sensitivity in lung adenocarcinoma through m6A-dependent translational repression of Wnt signaling by circ-FBXW7.

BACKGROUND: Tyrosine kinase inhibitors (TKIs) that specifically target mutational points in the EGFR gene have significantly reduced suffering and provided greater relief to patients with lung adenocarcinoma (LUAD). The third-generation EGFR-TKI, Osimertinib, has been successfully employed in clinical treatments to overcome resistance to both original and acquired T790M and L858R mutational points. Nevertheless, the issue of treatment failure response has emerged as an insurmountable problem. METHODS: By employing a combination of multiple and integrated approaches, we successfully identified a distinct population within the tumor group that plays a significant role in carcinogenesis, resistance, and recurrence. Our research suggests that addressing TKI resistance may involve targeting the renewal and repopulation of stem-like cells. To investigate the underlying mechanisms, we conducted RNA Microarray and m6A Epi-Transcriptomic Microarray analyses, followed by assessment of transcription factors. Additionally, we specifically designed a tag to detect the polypeptide circRNA-AA, and its expression was confirmed through m6A regulations. RESULTS: We initially identified unique molecular signatures present in cancer stem cells that contributed to poor therapeutic responses. Activation of the alternative Wnt pathway was found to sustain the renewal and resistant status of these cells. Through bioinformatics analysis and array studies, we observed a significant decrease in the expression of circFBXW7 in Osimertinib-resistant cell lines. Notably, the abnormal expression pattern of circFBXW7 determined the cellular response to Osimertinib. Functional investigations revealed that circFBXW7 inhibits the renewal of cancer stem cells and resensitizes both resistant LUAD cells and stem cells to Osimertinib. In terms of the underlying mechanism, we discovered that circFBXW7 can be translated into short polypeptides known as circFBXW7-185AA. These polypeptides interact with ß-catenin in an m6A-dependent manner. This interaction leads to reduced stability of ß-catenin by inducing subsequent ubiquitination, thereby suppressing the activation of canonical Wnt signaling. Additionally, we predicted that the m6A reader, YTHDF3, shares common binding sites with hsa-Let-7d-5p. Enforced expression of Let-7d post-transcriptionally decreases the levels of YTHDF3. The repression of Let-7d by Wnt signaling releases the stimulation of m6A modification by YTHDF3, promoting the translation of circFBXW7-185AA. This creates a positive feedback loop contributing to the cascade of cancer initiation and promotion. CONCLUSIONS: Our bench study, in vivo experiments, and clinical validation have unequivocally shown that circFBXW7 effectively inhibits the abilities of LUAD stem cells and reverses resistance to TKIs by modulating Wnt pathway functions through the action of circFBXW7-185AA on ß-catenin ubiquitination and inhibition. The regulatory role of circRNA in Osimertinib treatment has been rarely reported, and our findings reveal that this process operates under the influence of m6A modification. These results highlight the tremendous potential of this approach in enhancing therapeutic strategies and overcoming resistance to multiple TKI treatments.

Prostate perfusion mapping using Fourier-transform based velocity-selective arterial spin labeling: Choice of cutoff velocity and comparison with brain.

PURPOSE: To develop velocity selective arterial spin labeling (VSASL) protocols for prostate blood flow (PBF) and prostate blood volume (PBV) mapping. METHODS: Fourier-transform based velocity-selective inversion and saturation pulse trains were utilized in VSASL sequences to obtain blood flow and blood volume weighted perfusion signal, respectively. Here four cutoff velocities (Vcut = 0.25, 0.50, 1.00, and 1.50 cm/s) for PBF and PBV mapping sequences were evaluated with a parallel implementation in brain for measuring cerebral blood flow (CBF) and cerebral blood volume (CBV) with identical 3D readout. This study was performed at 3T on eight young and middle-aged healthy subjects comparing both perfusion weighted signal (PWS) and temporal SNR (tSNR). RESULTS: In contrast to CBF and CBV, the PWS of PBF and PBV were rather unobservable at Vcut of 1.00 or 1.50 cm/s and both PWS and tSNR of PBF and PBV considerably increased at the lower Vcut , indicating that blood moves much slower in prostate than in brain. Similar to the brain results, the tSNR of PBV-weighted signal was about two to four times over the corresponding values of PBF-weighted signal. The results also suggested a trend of reduced vascularity within prostate during aging. CONCLUSION: For prostate, a low Vcut of 0.25-0.50 cm/s seemed necessary for both PBF and PBV measurements to obtain adequate perfusion signal. As in brain, PBV mapping yielded a higher tSNR than PBF.

Evaluation of 3D stack-of-spiral turbo FLASH acquisitions for pseudo-continuous and velocity-selective ASL-derived brain perfusion mapping.

PURPOSE: The most-used 3D acquisitions for ASL are gradient and spin echo (GRASE)- and stack-of-spiral (SOS)-based fast spin echo, which require multiple shots. Alternatively, turbo FLASH (TFL) allows longer echo trains, and SOS-TFL has the potential to reduce the number of shots to even single-shot, thus improving the temporal resolution. Here we compare the performance of 3D SOS-TFL and 3D GRASE for ASL at 3T. METHODS: The 3D SOS-TFL readout was optimized with respect to fat suppression and excitation flip angles for pseudo-continuous ASL- and velocity-selective (VS)ASL-derived cerebral blood flow (CBF) mapping as well as for VSASL-derived cerebral blood volume (CBV) mapping. Results were compared with 3D GRASE readout on healthy volunteers in terms of perfusion quantification and temporal SNR (tSNR) efficiency. CBF and CBV mapping derived from 3D SOS-TFL-based ASL was demonstrated on one stroke patient, and the potential for single-shot acquisitions was exemplified. RESULTS: SOS-TFL with a 15° flip angle resulted in adequate tSNR efficiency with negligible image blurring. Selective water excitation was necessary to eliminate fat-induced artifacts. For pseudo-continuous ASL- and VSASL-based CBF and CBV mapping, compared to the employed four-shot 3D GRASE with an acceleration factor of 2, the fully sampled 3D SOS-TFL delivered comparable performance (with a similar scan time) using three shots, which could be further undersampled to achieve single-shot acquisition with higher tSNR efficiency. SOS-TFL had reduced CSF contamination for VSASL-CBF. CONCLUSION: 3D SOS-TFL acquisition was found to be a viable substitute for 3D GRASE for ASL with sufficient tSNR efficiency, minimal relaxation-induced blurring, reduced CSF contamination, and the potential of single-shot, especially for VSASL.

Metal-Coordination-Mediated H-Aggregates of Cyanine Dyes for Effective Photothermal Therapy.

Integration of cyanine dyes and metal ions into one nanoplatform via metal-coordination interactions is an effective strategy to build multimodality phototheranostics. The multifunctionalities of the formed nanoscale metal-organic particles (NMOPs) have been widely explored. However, the effect of metal-coordination interaction on the aggregation behavior of cyanine dyes is rarely reported. Herein, we reported the H-aggregation behavior of cyanine dye Cy-3COOH induced by different metal ions M (Fe2+ or Mn2+ ). Moreover, the extent of H-aggregates varied with different metal-coordination interactions. Upon NIR irradiation, H-aggregates of Cy-3COOH remarkably promoted photothermal conversion efficiency. Interestingly, we also find that H-aggregates of Cy-3COOH induced by metal ions can generate the reactive oxygen species (ROS) involving singlet oxygen (1 O2 ) and superoxide anion radical (O2 - ⋅) upon light irradiation. In addition, the ROS efficiency varies depending on the extent of H-aggregates. Additionally, the photoinduced ROS could disassemble aggregates and decompose cyanine dye Cy-3COOH, which limits the photothermal capability of Cy-3COOH/M NPs. Therefore, the photothermal performance of Cy-3COOH/M NPs could be manipulated by the degree of H-aggregation. This would provide a new insight to develop efficient phototheranostics NMOPs for cancer treatment.

Self-Healable, Malleable, Ecofriendly Recyclable and Robust Polyimine Thermosets Derived from Trifluoromethyl Diphenoxybenzene Backbones.

Dynamic covalent chemistry opens up great opportunities for a sustainable society by producing reprocessable networks of polymers and even thermosets. However, achieving the closed-loop recycling of polymers with high performance remains a grand challenge. The introduction of aromatic monomers and fluorine into covalent adaptable networks is an attractive method to tackle this challenge. Therefore, we present a facile and universal strategy to focus on the design and applications of polyimine vitrimers containing trifluoromethyl diphenoxybenzene backbones in applications of dynamic covalent polymers. In this study, fluorine-containing polyimine vitrimer networks (FPIVs) were fabricated, and the results revealed that the FPIVs not only exhibited good self-healability, malleability and processability without the aid of any catalyst, but also possessed decent mechanical strength, superior toughness and thermal stability. We hope that this work could provide a novel pathway for the design of high-performance polyimine vitrimers by recycling of plastic wastes.

Genome-wide association studies demonstrate the genes associated with perimysial thickness in ducks.

The thickness of the perimysium has an essential effect on the tenderness of the meat. However, the genetic basis underlying perimysial thickness has not been determined. The objective of this study was to explore the quantitative trait loci (QTL) that influence perimysial thickness in an F2 segregating population generated by Mallard × Pekin duck using the genome-wide association study (GWAS) method. Two QTL identified in chromosomes 27 and 13 displayed significant associations with perimysial thickness traits at the genome-wide level. The strongest association was the QTL located in chromosome 27, and this region had an effect on perimysial thickness and contained a promising candidate gene MAGI3 (Membrane-associated guanylate kinase, WW and PDZ domain containing 3). Meanwhile, association analysis showed that the top SNP within the MAGI3 gene was also associated with intramuscular fat content traits, which showed that perimysial thickness was positively correlated with intramuscular fat content. The second strongest association was the QTL region of chromosome 13. SUCLG2 (Succinate-CoA ligase GDP-forming subunit beta) is proximal to the top SNP and stood out as another candidate gene. Furthermore, the Transposase-Accessible Chromatin using Sequencing result showed that some key transcription factors (MYF5, MYOD1, KLF11) related to muscle development or energy metabolism might bind to the open regions of MAGI3 and SUCLG2. By analyzing the expression of different genotypes of the candidate gene, we speculate that different genotypes of MAGI3 may have an effect on breast muscle development, and then affect the thickness of the perimysium. This study maps two major genes of the duck breast muscle perimysial thickness trait, which helps to characterize muscle development and contributes to the genetic improvement of meat yield and quality in livestock.

Comparison of two novel diagnostic criteria for bronchopulmonary dysplasia in predicting adverse outcomes of preterm infants: a retrospective cohort study.

BACKGROUND: This study aimed to compare the predictive value of two diagnostic criteria for bronchopulmonary dysplasia (BPD) in preterm infants with gestational age (GA) < 32 weeks for death or severe respiratory morbidity at corrected age of 18-24 months. METHODS: In this retrospective cohort study, clinical data from July 2019 to September 2021 were classified by 2018 National Institute of Child Health and Human Development (NICHD) and 2019 Jensen definitions of BPD. Based on the follow-up results, the enrolled population was divided into adverse outcome group and normal outcome group. Logistic regression and receiver operating characteristic (ROC) curve analyses were conducted to explore the risk factors of adverse outcomes and evaluate the predictive value of both diagnostic criteria. RESULTS: Of 451 infants, 141 (31.3%) had adverse outcomes, which increased with increasing severity of BPD. Logistic regression analysis showed only BPD was an independent risk factor for adverse outcomes in preterm infants. ROC analysis revealed that both diagnostic criteria showed similar predictive values (2018 NICHD definition AUC = 0.771 vs. 2019 Jensen definition AUC = 0.770), with specificities of 93.5% and 96.8%, respectively; however, combining them separately with GA or birth weight did not improve their predictive values. CONCLUSIONS: The two novel definitions of BPD demonstrate similar predictive values in predicting death or severe respiratory morbidity at corrected age of 18-24 months, with higher specificity observed in both.

Medial minimally invasive percutaneous plate osteosynthesis for humeral shaft fractures: a case series and novel technique description.

INTRODUCTION: Minimally Invasive Percutaneous Plate Osteosynthesis (MIPPO) is increasingly favored for treating humeral shaft fractures (HSFs). However, conventional MIPPO techniques pose challenges in fixing fractures near fossa olecranon and carry a risk of iatrogenic radial nerve palsy. A novel technique using a medial MIPPO for treating humeral shaft fractures (HSFs) is described. Results of clinical follow-up are presented. MATERIALS AND METHODS: This study is a retrospective case series study. Twenty-one patients (mean age 43.9 ± 17.66 [22‒81] years) with HSFs were treated with the novel MIPPO fixation method. Clinical outcomes including time for radiographic consolidation, Disabilities of the Arm, Shoulder, and Hand (DASH) score, and complications were assessed at the last follow-up. The mean follow-up was 26 ± 17.12 (range 12-67) months. RESULTS: All patients had a bony union at a mean of 15.76 ± 6.74 (range 8-40) weeks based on X-ray with an early and aggressive range of motion. The complication rate was 0. The mean DASH score was3.29 ± 4.09 (range 0-14.17) at the time of the last follow-up. The mean screw density was 0.49 ± 0.1 (range 0.2-0.65). CONCLUSION: This novel surgical technique for HSFs is a viable alternative to previously described methods with the advantage of being less prone to nerve injury and easy to fix distal extra-articular HSFs. The learning curve is short. LEVEL OF EVIDENCE: IV.

Bayesian Optimization-guided Discovery of High-performance Methane Combustion Catalysts based on Multi-component PtPd@CeZrOx Core-Shell Nanospheres.

Formula regulation of multi-component catalysts by manual search is undoubtedly a time-consuming task, which has severely impeded the development efficiency of high-performance catalysts. In this work, PtPd@CeZrOx core-shell nanospheres, as a successful case study, is explicitly demonstrated how Bayesian optimization (BO) accelerates the discovery of methane combustion catalysts with the optimal formula ratio (the Pt/Pd mole ratio ranges from 1/2.33-1/9.09, and Ce/Zr from 1/0.22-1/0.35), which directly results in a lower conversion temperature (T50 approaching to 330 °C) than ones reported hitherto. Consequently, the best sample obtained could be efficiently developed after two rounds of iterations, containing only 18 experiments in all that is far less than the common human workload via the traditional trial-and-error search for optimal compositions. Further, this BO-based machine learning strategy can be straightforward extended to serve the autonomous discovery in multi-component material systems, for other desired properties, showing promising opportunities to practical applications in future.

Is an anteromedial minimally invasive approach for middle and distal third humeral fractures feasible? A cadaveric study and clinical case series.

BACKGROUND: Iatrogenic injury to the radial nerve is a risk in surgical treatment for extraarticular fractures of the middle and distal third of the humerus. We aimed to investigate the safety, feasibility and advantages of minimally invasive percutaneous plate osteosynthesis (MIPPO) via an anteromedial approach in the treatment of middle and middle-distal humeral fractures and to evaluate proximity to neurovascular structures. MATERIALS AND METHODS: In 2016, 13 adult cadaver arms were used to simulate a minimally invasive surgical approach to the anteromedial humerus followed by fixation with a locking compression plate (LCP), and several sets of anatomical data were measured to clarify the possible risk of iatrogenic vascular and nerve injury in this surgical approach. Then, a case series study of 12 patients with humeral fractures who were treated with this surgical approach was conducted between 2017 and 2020. RESULTS: The average humeral length was 29.22 ± 1.62 cm, the average width of the medial epicondyle of the humerus was 1.31 ± 0.17 cm, and the average distance from the vertex of the medial epicondyle to the median nerve was 2.96 ± 1.62 cm. Furthermore, the safe area for distal humeral screw placement was 6.28 ± 0.39 cm, and the average distance from the tip of the distal end of the screw in the medial epicondyle to the ulnar nerve was 1.7 ± 1.25 mm. None of the 12 patients had nerve damage or an incisional infection after the operation. CONCLUSIONS: The new approach was performed as described, and no cases of iatrogenic nerve palsy occurred. This approach can be used as an alternative for the treatment of extraarticular fractures of the middle and distal thirds of the humerus. LEVEL OF EVIDENCE: Level IV, therapeutic study.

Genome-wide association study reveals the genetic determinism of serum biochemical indicators in ducks.

BACKGROUND: The serum is rich in nutrients and plays an essential role in electrolyte and acid-base balance, maintaining cellular homeostasis. In addition, serum parameters have been commonly used as essential biomarkers for clinical diagnosis. However, little is known about the genetic mechanism of the serum parameters in ducks. RESULTS: This study measured 18 serum parameters in 320 samples of the F2 segregating population generated by Mallard × Pekin duck. The phenotypic correlations showed a high correlation between LDH, HBDH, AST, and ALT (0.59-0.99), and higher coefficients were also observed among TP, ALB, HDL-C, and CHO (0.46-0.87). And then, we performed the GWAS to reveal the genetic basis of the 18 serum biochemical parameters in ducks. Fourteen candidate protein-coding genes were identified with enzyme traits (AST, ALP, LDH, HBDH), and 3 protein-coding genes were associated with metabolism and protein-related serum parameters (UA, TG). Moreover, the expression levels of the above candidate protein-coding genes in different stages of breast muscle and different tissues were analyzed. Furthermore, the genes located within the high-LD region (r2 > 0.4 and - log10(P) < 4) neighboring the significant locus also remained. Finally, 86 putative protein-coding genes were used for GO and KEGG enrichment analysis, the enzyme-linked receptor protein signaling pathway and ErbB signaling pathway deserve further focus. CONCLUSIONS: The obtained results can contribute to new insights into blood metabolism and provide new genetic biomarkers for application in duck breeding programs.

Genome-wide association analysis reveal the genetic reasons affect melanin spot accumulation in beak skin of ducks.

BACKGROUND: Skin pigmentation is a broadly appearing phenomenon of most animals and humans in nature. Here we used a bird model to investigate why melanin spot deposits on the skin. RESULTS: Our result showed that growth age and the sunlight might induce melanin deposition in bird beak skin which was determined by genetic factors. GWAS helped us to identify two major loci affecting melanin deposition, located on chromosomes 13 and 25, respectively. The fine mapping works narrowed the candidate regions to 0.98 Mb and 1.0 Mb on chromosomes 13 and 25. The MITF and POU2F3 may be the causative genes and synergistically affect melanin deposition during duck beak skin. Furthermore, our data strongly demonstrated that the pathway of melanin metabolism contributes to melanin deposition on the skin. CONCLUSIONS: We demonstrated that age and sunlight induce melanin deposition in bird beak skin, while heredity is fundamental. The MITF and POU2F3 likely played a synergistic effect on the regulation of melanin synthesis, and their mutations contribute to phenotypic differences in beak melanin deposition among individuals. It is pointed out that melanin deposition in the skin is related to the pathway of melanin metabolism, which provided insights into the molecular regulatory mechanisms and the genetic improvement of the melanin deposition in duck beak.

Velocity-selective arterial spin labeling perfusion MRI: A review of the state of the art and recommendations for clinical implementation.

This review article provides an overview of the current status of velocity-selective arterial spin labeling (VSASL) perfusion MRI and is part of a wider effort arising from the International Society for Magnetic Resonance in Medicine (ISMRM) Perfusion Study Group. Since publication of the 2015 consensus paper on arterial spin labeling (ASL) for cerebral perfusion imaging, important advancements have been made in the field. The ASL community has, therefore, decided to provide an extended perspective on various aspects of technical development and application. Because VSASL has the potential to become a principal ASL method because of its unique advantages over traditional approaches, an in-depth discussion was warranted. VSASL labels blood based on its velocity and creates a magnetic bolus immediately proximal to the microvasculature within the imaging volume. VSASL is, therefore, insensitive to transit delay effects, in contrast to spatially selective pulsed and (pseudo-) continuous ASL approaches. Recent technical developments have improved the robustness and the labeling efficiency of VSASL, making it a potentially more favorable ASL approach in a wide range of applications where transit delay effects are of concern. In this review article, we (1) describe the concepts and theoretical basis of VSASL; (2) describe different variants of VSASL and their implementation; (3) provide recommended parameters and practices for clinical adoption; (4) describe challenges in developing and implementing VSASL; and (5) describe its current applications. As VSASL continues to undergo rapid development, the focus of this review is to summarize the fundamental concepts of VSASL, describe existing VSASL techniques and applications, and provide recommendations to help the clinical community adopt VSASL.

High accurate self-calibration of photonic integrated circuit using lossless thermo-optic phase shifters.

The accurate calibration of large-scale switch networks is critical for integrated photonics, in which the integrated optical true time delay chip is typical. In this work, a novel self-calibration method without extra testing ports is proposed by introducing lossless thermo-optic phase shifters instead to calibrate the network. As a demonstration, a 5-bit delay line based on silicon nitride is fabricated and calibrated. The extinction ratio of all the switches is greater than 30.9 dB at the cross and bar states. Using this method, the 5-bit optical delay line which can be tuned in a range of 118.53 ps and reach a low delay time deviation less than ±0.4 ps.