RESUMEN
Photonic-assisted microwave frequency identification has been extensively studied in civil and defense applications due to its distinct features including wide frequency coverage, large instantaneous bandwidth, high frequency resolution, and immunity to electromagnetic interference. In this paper, we propose and experimentally demonstrate an approach for high-resolution frequency identification of wideband microwave signals by linearly mapping the microwave frequencies to the time delays of the optical pulses. In the proposed system, an ultrahigh-Q hybrid optical filter is a key component, which consists of a fiber ring resonator (FRR) and a silicon photonic racetrack micro-ring resonator (MRR). The FRR has an ultra-narrow bandwidth of 7.6â MHz and a small free spectral range (FSR) of 292.5â MHz, while the MRR has a bandwidth of 167.5â MHz and a large FSR of 73.8â GHz. By precisely matching the resonance wavelengths of the FRR and the MRR, a hybrid optical filter with an ultrahigh Q-factor and a large FSR is realized, which is much preferred to realizing a high resolution and a wide measurement range for microwave frequency identification. An experiment is performed and different types of microwave signals are identified. A frequency measurement range as broad as 33â GHz from 2 to 35â GHz, a frequency resolution as high as 15â MHz and a measurement accuracy as high as 5.6â MHz are experimentally demonstrated. The proposed frequency identification system holds great advantages including high frequency resolution, high measurement accuracy, and wide frequency coverage, which can find extensive applications in next-generation electronic warfare and cognitive radio systems.
RESUMEN
The discovery and implementation of media that derive from bioinspired designs and bear optical readouts featuring large Stokes shifts are of continued interest to a wide variety of researchers and clinicians. Myco-F, a novel mycophenolic acid precursor-based probe features a cleavable tert-butyldimethylsiloxy group to allow for fluoride detection. Myco-F exhibits high selectivity and specificity towards F- (Stokes shift = 120 nm). All measurements were performed in complete aqueous media (LOD=0.38 µM). Myco-F enables detection of fluoride ions in living HEK293 cells and localizes in the eye region (among other regions) of the zebrafish. DFT calculations support the proposed ESIPT working photomechanism.
Asunto(s)
Fluoruros , Pez Cebra , Animales , Humanos , Ácido Micofenólico , Células HEK293 , Colorantes FluorescentesRESUMEN
This study adopted a quasi-experimental design to explore the effects of fundamental movement skill intervention on the acquisition and retention of physical activity levels and health-related fitness in children with autism spectrum disorder (ASD). In the experiments, 11 children received fundamental motor skill training (12 weeks, 60 min/session, 4 times/week), and 10 children maintained traditional physical activity. Assessments were performed using an ActiGraph GT3X+ accelerometer, health-related fitness pre-post intervention, and 1-month follow-up tests. The sedentary time during physical activity was significantly decreased (p = 0.01), and there were large changes in health-related physical fitness indicators, including significantly improved body composition (body mass index, F(1,19) = 8.631, p = 0.03, partial η2 = 0.312), muscle strength and endurance (sit-ups, F(1,19) = 3.376, p = 0.02, partial η2 = 0.151 and vertical jumps, F(1,19) = 5.309, p = 0.04, partial η2 = 0.218), and flexibility (sit and reach, F(1,19) = 36.228, p = 0.02, partial η2 = 0.656). Moreover, the follow-up tests showed that the children's sedentary time continued to reduce, and the muscle strength and endurance (sit-ups, F(1,19) = 4.215, p = 0.01, partial η2 = 0.426) improved continuously after the intervention. Based on this study, actionable and regular fundamental movement skill programs can be provided in the future as an effective way to achieve the healthy development goals of children with ASD.
RESUMEN
Brain-computer interface (BCI) has been the subject of extensive research recently. Governments and companies have substantially invested in relevant research and applications. The restoration of communication and motor function, the treatment of psychological disorders, gaming, and other daily and therapeutic applications all benefit from BCI. The electrodes hold the key to the essential, fundamental BCI precondition of electrical brain activity detection and delivery. However, the traditional rigid electrodes are limited due to their mismatch in Young's modulus, potential damages to the human body, and a decline in signal quality with time. These factors make the development of flexible electrodes vital and urgent. Flexible electrodes made of soft materials have grown in popularity in recent years as an alternative to conventional rigid electrodes because they offer greater conformance, the potential for higher signal-to-noise ratio (SNR) signals, and a wider range of applications. Therefore, the latest classifications and future developmental directions of fabricating these flexible electrodes are explored in this paper to further encourage the speedy advent of flexible electrodes for BCI. In summary, the perspectives and future outlook for this developing discipline are provided.
Asunto(s)
Interfaces Cerebro-Computador , Humanos , Electroencefalografía , Electrodos , EncéfaloRESUMEN
High-voltage and high-power devices are indispensable in spacecraft for outer space explorations, whose operations require aerospace materials with adequate vacuum surface insulation performance. Despite persistent attempts to fabricate such materials, current efforts are restricted to trial-and-error methods and a universal design guideline is missing. The present work proposes to improve the vacuum surface insulation by tailoring the surface trap state density and energy level of the metal oxides with varied bandgaps, using coating on a polyimide (PI) substrate, aiming for a more systematical workflow for the insulation material design. First-principle calculations and trap diagnostics are employed to evaluate the material properties and reveal the interplay between trap states and the flashover threshold, supported by dedicated analyses of the flashover voltage, secondary electron emission (SEE) from insulators, and surface charging behaviors. Experimental results suggest that the coated PI (i.e., CuO@PI, SrO@PI, MgO@PI, and Al2O3@PI) can effectively increase the trap density and alter the trap energy levels. Elevated trap density is demonstrated to always yield lower SEE. In addition, increasing shallow trap density accelerates surface charge dissipation, which is favorable for improving surface insulation. CuO@PI exhibits the most remarkable increase in shallow trap density, and accordingly, the highest flashover voltage is 42.5% higher than that of pristine PI. This study reveals the critical role played by surface trap states in flashover mitigation and offers a novel strategy to optimize the surface insulation of materials.
RESUMEN
Background: Falls and fall-related injuries are not uncommon among older adults and may lead to serious health deterioration and decreased quality of life. Numerous types of physical activity have been proposed to improve balance and strength in older adults with varying degrees of success. Nintendo's Wii Fit video exergame uses body movement as a game controller and provides real-time feedback for games designed to enhance balance and muscle strength. However, whether Wii Fit exercise improves the balance and lower limb muscle strength of older adults remains uncertain. Objective: To evaluate the current literature by using meta-analyses to assess whether Wii Fit exercise is associated with improved balance and lower limb muscle strength in older adults. Methods: We searched PubMed, EMBASE, Web of Science, China National Knowledge Infrastructure, and Wanfang Data from inception to February 16, 2022, for relevant studies and conducted a manual search of the literature. Data extraction of the included studies were independently performed by two authors. The methodologic quality of each included study was assessed using the Physical Therapy Evidence Database (PEDro) scale. Meta-analyses were conducted using Review Manager 5.3. Results: Of 991 articles initially identified, 10 articles (379 participants; aged ≥65 years, range 65-92 years; 188 participants in Wii Fit exercise groups, and 191 participants in control groups), including 8 randomized controlled trials, were assessed in this meta-analysis. The methodologic quality of the included studies evaluated with the PEDro average score was 6.4 and ranged from 5 to 8 points, indicating moderate quality. Compared with no exercise, Wii Fit exercise was associated with significant improved scores on the Berg Balance Scale, which evaluates functional balance (mean difference, 1.38; 95% CI, 0.61-2.16; I 2 = 31%; P = 0.0005) and on the Timed Up and Go test, which evaluates static and dynamic balance (standardized mean difference, -0.51; 95% CI,-0.88 to -0.14; I 2 = 52%; P = 0.007). However, for the three studies assessed, Wii Fit exercise did not significantly improve scores on the 30-s chair stand test, which evaluates the functional strength and endurance of the lower limb muscles (mean difference, 0.82; 95% CI, -0.14 to 1.77; z = 1.68; P = 0.09). Conclusions: Our findings indicated that Wii Fit exercise is an effective approach to improve functional, static, and dynamic balance among older adults. Additional meta-analyzes with higher numbers of randomized controlled trials are suggested to confirm the benefits of Wii Fit exercise on balance in older adults, to establish whether functional strength and endurance of lower limb muscles are improved, and to explore the relationship between improved balance and fall prevention in this population.
RESUMEN
Terahertz imaging and spectroscopy is an exciting technology that has the potential to provide insights in medical imaging. Prior research has leveraged statistical inference to classify tissue regions from terahertz images. To date, these approaches have shown that the segmentation problem is challenging for images of fresh tissue and for tumors that have invaded muscular regions. Artificial intelligence, particularly machine learning and deep learning, has been shown to improve performance in some medical imaging challenges. This paper builds on that literature by modifying a set of deep learning approaches to the challenge of classifying tissue regions of images captured by terahertz imaging and spectroscopy of freshly excised murine xenograft tissue. Our approach is to preprocess the images through a wavelet synchronous-squeezed transformation (WSST) to convert time-sequential terahertz data of each THz pixel to a spectrogram. Spectrograms are used as input tensors to a deep convolution neural network for pixel-wise classification. Based on the classification result of each pixel, a cancer tissue segmentation map is achieved. In experimentation, we adopt leave-one-sample-out cross-validation strategy, and evaluate our chosen networks and results using multiple metrics such as accuracy, precision, intersection, and size. The results from this experimentation demonstrate improvement in classification accuracy compared to statistical methods, an improvement to segmentation between muscle and cancerous regions in xenograft tumors, and identify areas to improve the imaging and classification methodology.
RESUMEN
Purpose: We investigate the enhancement in terahertz (THz) images of freshly excised breast tumors upon treatment with an optical clearance agent. The hyperspectral imaging and spectral classifications are used to quantitatively demonstrate the image enhancement. Glycerol solution with 60% concentration is applied to excised breast tumor specimens for various time durations to investigate the effectiveness on image enhancement. Approach: THz reflection spectroscopy is utilized to obtain the absorption coefficient and the index of refraction of untreated and glycerol-treated tissues at each frequency up to 3 THz. Two classifiers, spectral angular mapping (SAM) based on several kernels and Euclidean minimum distance (EMD) are implemented to evaluate the effectiveness of the treatment. The testing raw data is obtained from five breast cancer specimens: two untreated specimens and three specimens treated with glycerol solution for 20, 40, or 60 min. All tumors used in the testing data have healthy tissues adjacent to cancerous ones consistent with the challenge faced in lumpectomy surgeries. Results: The glycerol-treated tissues showed a decrease in the absorption coefficients compared with untreated tissues, especially as the period of treatment increased. Although the sensitivity metric of the classifier presented higher values in the untreated tissues compared with the treated ones, the specificity and accuracy metrics demonstrated higher values for the treated tissues compared with the untreated ones. Conclusions: The biocompatible glycerol solution is a potential optical clearance agent in THz imaging while keeping the histopathology imaging intact. The SAM technique provided a good classification of cancerous tissues despite the small amount of cancer in the training data (only 7%). The SAM exponential kernel and EMD presented classification accuracy of â¼ 80 % to 85% compared with linear and polynomial kernels that provided accuracy ranging from 70% to 80%. Overall, glycerol treatment provides a potential improvement in cancer classification in freshly excised breast tumors.
RESUMEN
Electronic skin (e-skin) has brought us great convenience and revolutionized our way of life. However, due to physical or chemical aging and damage, they will inevitably be degraded gradually with practical operation. The emergence of self-healing materials enables e-skins to achieve repairment of cracks and restoration of mechanical function by themselves, meeting the requirements of the era for building durable and self-healing electronic devices. This work reviews the current development of self-healing e-skins with various application scenarios, including motion sensor, human-machine interaction and soft robots. The new application fields and present challenges are discussed; meanwhile, thinkable strategies and prospects of future potential applications are conferenced.
RESUMEN
In this paper, the fabrication and electrical performance optimization of a four-levels vertically stacked Si0.7Ge0.3 channel nanowires gate-all-around transistor are explored in detail. First, a high crystalline quality and uniform stacked Si0.7Ge0.3/Si film is achieved by optimizing the epitaxial growth process and a vertical profile of stacked Si0.7Ge0.3/Si fin is attained by further optimizing the etching process under the HBr/He/O2 plasma. Moreover, a novel ACT@SG-201 solution without any dilution at the temperature of 40 °C is chosen as the optimal etching solution for the release process of Si0.7Ge0.3 channel. As a result, the selectivity of Si to Si0.7Ge0.3 can reach 32.84 with a signature of "rectangular" Si0.7Ge0.3 extremities after channel release. Based on these newly developed processes, a 4-levels vertically stacked Si0.7Ge0.3 nanowires gate-all-around device is prepared successfully. An excellent subthreshold slope of 77 mV/dec, drain induced barrier-lowering of 19 mV/V, Ion/Ioff ratio of 9 × 105 and maximum of transconductance of ~83.35 µS/µm are demonstrated. However, its driven current is only ~38.6 µA/µm under VDS = VGS = -0.8 V due to its large resistance of source and drain (9.2 × 105 Ω). Therefore, a source and drain silicide process is implemented and its driven current can increase to 258.6 µA/µm (about 6.7 times) due to the decrease of resistance of source and drain to 6.4 × 104 Ω. Meanwhile, it is found that a slight increase of leakage after the silicide process online results in a slight deterioration of the subthreshold slope and Ion/Ioff ratio. Its leakage performance needs to be further improved through the co-optimization of source and drain implantation and silicide process in the future.
RESUMEN
In this paper, to solve the epitaxial thickness limit and the high interface trap density of SiGe channel Fin field effect transistor (FinFET), a four-period vertically stacked SiGe/Si channel FinFET is presented. A high crystal quality of four-period stacked SiGe/Si multilayer epitaxial grown with the thickness of each SiGe layer less than 10 nm is realized on a Si substrate without any structural defect impact by optimizing its epitaxial grown process. Meanwhile, the Ge atomic fraction of the SiGe layers is very uniform and its SiGe/Si interfaces are sharp. Then, a vertical profile of the stacked SiGe/Si Fin is achieved with HBr/O2/He plasma by optimizing its bias voltage and O2 flow. After the four-period vertically stacked SiGe/Si Fin structure is introduced, its FinFET device is successfully fabricated under the same fabrication process as the conventional SiGe FinFET. And it attains better drive current Ion, subthreshold slope (SS) and Ion/Ioff ratio electrical performance compared with the conventional SiGe channel FinFET, whose Fin height of SiGe channel is almost equal to total thickness of SiGe in the four-period stacked SiGe/Si channel FinFET. This may be attributed to that the four-period stacked SiGe/Si Fin structure has larger effective channel width (Weff) and may maintain a better quality and surface interfacial performance during the whole fabrication process. Moreover, Si channel of the stacked SiGe/Si channel turning on first also may have contribution to its better electrical properties. This four-period vertically stacked SiGe/Si channel FinFET device has been demonstrated to be a practical candidate for the future technology nodes.
RESUMEN
In the crystal structure of the title compound, C(21)H(25)NO(11), the hexopyranosyl ring adopts a chair conformation and the five substituents are in equatorial positions. An intra-molecular hydrogen bond between the amino group and a neighbouring carbonyl group is found. Two carbonyl groups are disordered and were refined using a split model.
RESUMEN
OBJECTIVE: To study the effects of universal adhesives and resin cement on the shear bond strength and durability of zirconia ceramics. METHODS: Zirconia ceramics were sintered into 20 mm×10 mm×10 mm and 10 mm×10 mm×10 mm specimens. The experiment was divided into 12 groups. The two types of specimens were bonded using two variants of resin cement (RelyX Ultimate and Clearfil SAC self-adhesive resin cement), universal adhesives (non-adhesive, Scotchbond uni-versal adhesive, and Clearfil SE One adhesive), and storage conditions (water bath and water bath-thermal cycling). The shear bond strengths were tested, and the fracture morphologies were analyzed. RESULTS: The cement (F=8.41, P<0.01) and adhesive (F=30.34, P<0.01) exerted a significant effect on the shear bond strength of zirconia, whereas storage condition showed no significant effect on this property (F=1.83, P=0.18). The lowest shear bond strength (14.02 MPa±6.86 MPa) was exhibited by the group treated with RelyX Ultimate resin cement, non-adhesive, and water bath-thermal cycling, whereas the highest shear bond strength (54.12 MPa±8.37 MPa) was displayed by the group treated with RelyX Ultimate resin cement, Scotchbond universal adhesive, and water bath-thermal cycling. CONCLUSIONS: Universal adhesives can improve the durability of the bonding of resin cement to zirconia. If non-self-adhesive resin cement is used without a universal adhe-sive, the durability of the bond will be greatly reduced.