Effects of a powered air-purifying respirator intervention on indium exposure reduction and indium related biomarkers among ITO sputter target manufacturing workers.

This study aimed to evaluate the efficacy of powered air-purifying respirators (PAPRs) worn by the workers, and to investigate the effect of this application on exposure and preclinical effects in terms of workplace measuring and biomarker monitoring in ITO sputter target manufacturing plants and workers, respectively. Fifty-four workers were recruited and investigated from 2010-2012, during which PAPRs were provided to on-site workers in September 2011. Each worker completed questionnaires and provided blood and urine samples for analysis of biomarkers of indium exposure and preclinical effects. Area and personal indium air samples were randomly collected from selected worksites and from participants. The penetration percentage of the respirator (concentration inside respirator divided by concentration outside respirator) was 6.6%. Some biomarkers, such as S-In, SOD, GPx, GST, MDA, and TMOM, reflected the decrease in exposure and showed lower levels, after implementation of PAPRs. This study is the first to investigate the efficacy of PAPRs for reducing indium exposure. The measurement results clearly showed that the implementation of PAPRs reduces levels of indium-related biomarkers. These findings have practical applications for minimizing occupational exposure to indium and for managing the health of workers exposed to indium.

Simultaneous Detection of 3-Nitrotyrosine and 3-Nitro-4-hydroxyphenylacetic Acid in Human Urine by Online SPE LC-MS/MS and Their Association with Oxidative and Methylated DNA Lesions.

Reactive nitrogen species (RNS) can modify proteins at tyrosine and tryptophan residues, and they are involved in the pathogenesis of various human diseases. In this study, we present the first liquid chromatography-tandem mass spectrometry (LC-MS/MS)-based method that enables the simultaneous measurement of urinary 3-nitrotyrosine (3-NTYR) and its metabolite 3-nitro-4-hydroxyphenylacetic acid (NHPA). After the addition of stable isotope-labeled internal standards, urine samples were purified and enriched using manual solid-phase extraction (SPE) and HPLC fractionation followed by online SPE LC-MS/MS analysis. The limits of quantification in urine were 3.1 and 2.5 pg/mL for 3-NTYR and NHPA, respectively. Inter- and intraday imprecision was <15%. The mean relative recoveries of 3-NTYR and NHPA in urine were 89-98% and 90-98%, respectively. We further applied this method to 65 urinary samples from healthy subjects. Urinary samples were also analyzed for N-nitrosodimethylamine (NDMA) as well as oxidative and methylated DNA lesions, namely, 8-oxo-7,8-dihydroguanine (8-oxoGua), 8-oxo-7,8-dihydro-2'-deoxyguanosine (8-oxodGuo), N7-methylguanine (N7-MeG), and N3-methyladenine (N3-MeA), using reported LC-MS/MS methods. Urinary 3-NTYR and NHPA levels were measured at concentrations of 63.2 ± 51.5 and 77.4 ± 60.8 pg/mL, respectively. Urinary 3-NTYR and NHPA levels were highly correlated with each other and with 8-oxoGua and 8-oxodGuo. Our findings demonstrated that a relationship exists between oxidative and nitrative stress. However, 3-NTYR and NHPA were correlated with N7-MeG and N3-MeA but not with NDMA, suggesting that NDMA may not be a representative biomarker of N-nitroso compounds that are induced by RNS.

Investigation of metal concentration distribution and corresponding health exposure assessment of fabricated metal product manufacturers.

The fabricated metal product industries were identified as producers of variable and heterogeneous pollution. Workers in these manufacturing facilities are exposed to multiple pollutants present at variable concentrations. Specific known adverse health effects include bladder cancer associated with metalworking fluid exposure and lung cancer associated with electroplating processes. To reduce the incidence of these adverse effects, the main challenge is to identify the most hazardous pollutants within this complex exposure environment and evaluate the corresponding health potentials. In this study, exposure indices were formulated to assess multiple metal exposures with the ultimate goal of providing relevant information for exposure reduction and control measures. Fifteen plants, including metal mold manufacturing, metal casting, and surface treatment plants, were investigated in terms of total concentration, summation of corresponding ratio to threshold limit value (STLVr), hazard index (HI), and incremental cancer risk. The results revealed that emissions of aluminum, iron, and manganese were primarily found in the metal mold manufacturing/casting plants, while emissions of chromium, nickel, and zinc were found in surface treatment plants. STLVr and HI were more useful than the total concentration for identifying hazardous metals, which were chromium and nickel, and could specify the facilities that were in need of control measures. As for cancer risk, the metal mold manufacturing/casting plants had lower risk than the surface treatment plants, and the contributing metals for these two plant types were cobalt and chromium, respectively. This study established a useful procedure to evaluate health hazards and cancer risk. The resulting information is useful for prioritizing mitigation control of multiple metal exposures.

Plasma homocysteine is associated with increased oxidative stress and antioxidant enzyme activity in welders.

The purpose of this study was to examine the association of vitamin B6 status and plasma homocysteine with oxidative stress and antioxidant capacities in welders. Workers were divided into either the welding exposure group (n = 57) or the nonexposure controls (n = 42) based on whether they were employed as welders. There were no significant differences in vitamin B6 status and plasma homocysteine concentration between the welding exposure group and the nonexposure controls. The welding exposure group had significantly higher levels of oxidized low-density lipoprotein cholesterol and lower erythrocyte glutathione concentration and superoxide dismutase (SOD) activities when compared to nonexposure controls. Plasma pyridoxal 5'-phosphate concentration did not correlate with oxidative stress indicators or antioxidant capacities in either group. However, plasma homocysteine significantly correlated with total antioxidant capacity (TAC) (partial r(s) = -0.34, P < 0.05) and erythrocyte SOD activities (partial r(s) = 0.29, P < 0.05) after adjusting for potential confounders in the welding exposure group. In the welding exposure group, adequate vitamin B6 status was not associated with oxidative stress or antioxidant capacities. However, elevated plasma homocysteine seemed to be a major contributing factor to antioxidant capacities (TAC and erythrocyte SOD activities) in welders.

Direct analysis of 5-methylcytosine and 5-methyl-2'-deoxycytidine in human urine by isotope dilution LC-MS/MS: correlations with N-methylated purines and oxidized DNA lesions.

Recent evidence suggests that active DNA demethylation involves base excision repair (BER) and nucleotide excision repair (NER) pathways. We hypothesized that the resulting excision products could be further excreted and present in urine. A highly specific and sensitive liquid chromatography-tandem mass spectrometric (LC-MS/MS) method was first developed for simultaneously measuring urinary 5-methylcytosine (5-meC) and 5-methyl-2'-deoxycytidine (5-medC). With the use of isotope internal standards and online solid-phase extraction (SPE), the detection limits of 5-meC and 5-medC were estimated to be 1.2 and 0.3 pg, respectively. This method was applied to measure urinary samples of 376 healthy males. Urinary samples were also measured for methylated and oxidized DNA lesions, namely, N7-methylguanine (N7-meG), N3-methyladenine (N3-meA), 8-oxo-7,8-dihydroguanine (8-oxoGua), and 8-oxo-7,8-dihydro-2'-deoxyguanosine (8-oxodG), using reported online SPE LC-MS/MS methods. Results showed that mean urinary levels of 5-meC and 5-medC were 28.4 ± 14.3 and 7.04 ± 7.2 ng/mg creatinine, respectively, supporting the possible presence of DNA demethylation through BER and NER mechanisms. Urinary levels of 5-meC were significantly positively correlated with N7-meG, N3-meA, and 8-oxodG. Good correlations between 5-meC and methylated and oxidized DNA lesions may have implied the underlying linkage between genetic (DNA lesions) and epigenetic (DNA methylation) alterations derived from exogenous exposure and/or from endogenous cellular processes in human and require further investigation.

Relationship between indium exposure and oxidative damage in workers in indium tin oxide production plants.

PURPOSE: The study aimed to assess the relationship between indium exposure and surfactant protein and any oxidative damage in indium tin oxide (ITO)-exposed workers. METHODS: The study was conducted in two typical ITO-manufacturing plants in Taiwan. One hundred and seventy manufacturing workers and 132 administrators were recruited. RESULTS: The geometric mean serum indium (S-In) level in the workers of the manufacturing department was 1.26 µg/l, which was significantly higher than those in the administrative department (0.72 µg/l). The S-In levels of 49 workers were higher than 3 µg/l (49/302, 16.2%), exceeding an occupational exposure limit suggested by the Japan Society for Occupational Health. Significant positive relationships were found between S-In and surfactant protein A (SP-A), and surfactant protein D (SP-D) levels. SP-A and SP-D levels were elevated significantly in the workers with moderately high indium exposure. CONCLUSION: The present study indicates a significant elevating trend of SP-A and SP-D levels in ITO-manufacturing workers, which are sensitive markers of interstitial lung disease. Though the indium exposure is not directly linked to all indicators of oxidative DNA damage, the ITO-manufacturing workplace is suggested to be related to oxidative DNA damage for the workers in the current study. Therefore, in addition to the indium exposure, there might be other occupational hazards in the ITO workplace to cause oxidative damage.

Influences of shift work on fatigue among nurses.

AIM: To compare the symptoms of fatigue and physiological indices in nurses who work during the day with nurses who work in shifts. METHOD: One-hundred and seven nurses were recruited and asked to assess their symptoms of fatigue before their work commenced and after it finished. RESULTS: Using logistic regression analysis adjusted for covariates, it was found that nurses who work in shifts were more fatigued than nurses who work during the day (odds ratio = 2.44, P < 0.10). There was a significant difference regarding critical flicker fusion in the two groups of nurses (P = 0.032), and nurses who work in shifts had poorer physiological indices than nurses who work during the day. CONCLUSION: It is clear that differing work schedules result in differing levels of fatigue, with shift work attributing to higher levels than day work. IMPLICATIONS FOR NURSING MANAGEMENT: Nurse managers need to take into account the fatiguing effects of different work schedules when designing rostering patterns.

Evaluation of erythemal UV effective irradiance from UV lamp exposure and the application in shield metal arc welding processing.

Ultraviolet radiation (UVR) exposure is known to cause potential effects such as erythema in skin. For UV-induced erythema (sunburn), the action spectrum from the Commission Internationale de l'Eclairage, International Commission on Illumination (CIE) was adopted. Erythemal UV effects from UVR lamp exposure were investigated with commercial spectroradiometry devices in this research. Three kinds of portable UV germicidal lamps with broadband UVA (BB UVA, 350-400 nm), broadband UVB (BB UVB, 280-350 nm), and narrowband UVC (NB UVC, 254 nm) wavelengths served as the UVR emission sources. An action spectrum expresses the effectiveness of radiation for assessing the hazard of UVR in the erythemal action spectrum from 250-400 nm. The UV Index (UVI) is an irradiance scale computed by multiplying the CIE erythemal irradiance integral in milliwatts per square meter by 0.04 m mW. A comprehensive approach to detecting erythemal UVR magnitude was developed to monitor the effective exposure from UV lamps. The erythemal UVR measurement was established and the exposure assessment was applied to monitor erythemal UVR magnitude from shield metal arc welding (SMAW) processing. From this study, the erythemal UVR exposures were assessed and evaluated with environmental solar simulation of the UVI exposure.

Children are particularly vulnerable to environmental tobacco smoke exposure: Evidence from biomarkers of tobacco-specific nitrosamines, and oxidative stress.

BACKGROUND: Worldwide, smoking is a major public health problem, with exposure to environmental tobacco smoke (ETS) affecting both smokers, and passive smokers, including children. Despite ETS also describing secondhand, and thirdhand smoke (SHS, and THS respectively), the health effects of exposure to passive smoking via these sources are not fully understood, particularly in children. Although cotinine, the primary proximate metabolite of nicotine, has been widely used as a biomarker of ETS exposure, 4-(methylnitrosamino)-1-(3-pyridyl)-1-butanol (NNAL), the metabolite of the tobacco-specific nitrosamine 4-(methylnitrosamino)-1-(3-pyridyl)-1-butanone (NNK), provides a uniquely important contribution, both as a biomarker of exposure, and as a specific risk indicator for pulmonary carcinogenesis. METHODS: We used LC-MS/MS to study NNK metabolites, cotinine, and 8-oxo-7,8-dihydro-2'-deoxyguanosine (a biomarker of oxidative stress), in the urine of 110 non-smoking adults (age range: 23-62) and 101 children (age range: 9-11), exposed to ETS. RESULTS: In our study of passive smoking adults, and children exposed to ETS, we showed that although the children had a similar urinary level of cotinine compared to the adults, the children had approximately two times higher levels of urinary total NNAL (P = 0.002), and free NNAL (P = 0.01), than adults. The children also had three times lower ability to detoxify NNK than adults (P < 0.001). Furthermore, the children showed 1.5 times higher ratio of total NNAL/cotinine than adults (P = 0.01), implying that THS is another important source of ETS in this population. Furthermore, ETS exposure in children appeared to lead to an increase in levels of oxidative stress. CONCLUSIONS: Taken together, our results demonstrate that, in children, THS may play an important role in the ETS exposure, and that children are at particular risk of ETS-induced health effects.

Ethylene oxide sterilization in the medical-supply manufacturing industry: assessment and control of worker exposure.

OBJECTIVE: In 2005, the Taiwan Institute of Occupational Safety and Health started an on-site consulting program for the medical supplies manufacturing industry, which use ethylene oxide (EO) as a sterilant, with the goal of enhancing occupational hygiene practices and controlling EO-related risks. This study presents EO exposure assessment results and examines the effectiveness of control measures. METHODS: Detailed surveys, including exposure monitoring, were conducted at 10 factories. Airborne EO was collected using an HBr-coated charcoal tube and analyzed using GC/MS. RESULTS: Sterilizer operators had an average short-term EO exposure level of 27.61 ppm during unloading; mean time-weighted average workshift exposure was 7.35 ppm. High EO concentrations were also present throughout the facilities. Specifically, mean EO concentrations in the aeration area, near the sterilizer and in the warehouse were 10.19, 5.75, and 8.78 ppm, respectively. These findings indicate that immediate controls are needed, and that EO emissions from sterilized products during storage cannot be overlooked. Worker short-term exposures during unloading was inversely correlated (p < 0.05) with the numbers of poststerilization purge cycle applied. The specific controls implemented and their usefulness is discussed. CONCLUSION: Increasing the number of poststerilization purge cycles is a simple approach to eliminating extremely high exposure during unloading. Improvements to ventilation, particularly in the aeration area and warehouse, were also effective in minimizing worker exposures. Use of effective respirator is recommended until the EO exposure levels, averaging 3.41 ppm after the controls, fall below the permissible exposure limit.

Mass, number and surface area concentrations of alpha-quartz exposures of refractory material manufacturing workers.

This study set out to assess the respirable mass, surface area, and number concentrations of the alpha-quartz content particles (C(r-m), C(r-s) and C(r-n)) to which workers were exposed in six different exposure groups, the raw material handling (n=10), crushing (n=12), mixing (n=12), forming (n=10), furnace (n=10), and packaging (n=10), in a refractory material manufacturing plant. For C(r-m), the exposure values in sequence were found as: mixing (68.1 microg/m3)>packaging (55.9 microg/m3)>raw material handling (53.3 microg/m3)>furnace (31.0 microg/m3)>crushing (29.8 microg/m3)>forming (22.4 microg/m3). We also found that ~21.2-68.2% of the above Cr-m exceeded the current TLV-TWA for the alpha-quartz content (50 microg/m3) suggesting a need for initiating control strategies immediately. We further conducted particle size-segregating samplings in four workplaces: crushing (n=3), mixing (n=3), forming (n=3), and furnace (n=3). We found that all resultant particle size distributions shared a quite similar geometric standard deviation (sigma(g); =2.24-2.92), but the process area, associated with higher mechanical energy (i.e., crushing process), contained finer alpha-quartz content particles (mass median aerodynamic diameter; MMAD=3.22 microm) than those areas associated with lower mechanical energy (i.e., mixing, forming, and furnace; MMAD=6.17, 5.95, and 8.92 microm, respectively). These results gave a ratio of C(r-m) in the above four exposure groups (i.e., crushing: mixing: forming: furnace=1.00: 2.30: 0.753: 1.04) which was quite different from those of C(r-s) (1.00: 1.74: 0.654: 0.530) and C(r-n) (1.00: 1.27: 0.572: 0.202). Our results clearly indicate the importance of measuring particle size distributions for assessing workers' free silica exposures.

Evaluation and monitoring of UVR in Shield Metal ARC Welding processing.

This study established a comprehensive approach to monitoring UVR magnitude from Shield Metal Arc Welding (SMAW) processing and quantified the effective exposure based on measured data. The irradiances from welding UVR were calculated with biological effective parameter (Slambda) for human exposure assessment. The spectral weighting function for UVR measurement and evaluation followed the American Conference of Governmental Industrial Hygienists (ACGIH) guidelines. Arc welding processing scatters bright light with UVR emission over the full UV spectrum (UVA, UVB, and UVC). The worst case of effective irradiance from a 50 cm distance arc spot with a 200 A electric current and an electrode E6011 (4 mm) is 311.0 microW cm(-2) and has the maximum allowance time (Tmax) of 9.6 s. Distance is an important factor affecting the irradiance intensity. The worst case of the effective irradiance values from arc welding at 100, 200, and 300 cm distances are 76.2, 16.6, and 12.1 microW cm(-2) with Tmax of 39.4, 180.7, and 247.9 s, respectively. Protective materials (glove and mask) were demonstrated to protect workers from hazardous UVR exposure. From this study, the methodology of UVR monitoring in SMAW processing was developed and established. It is recommended that welders should be fitted with appropriate protective materials for protection from UVR emission hazards.

UVR measurement of a UV germicidal lamp.

Ultraviolet radiation (UVR) exposure is known to cause serious effects such as conjunctivitis and keratitis in eyes and erythema in skin. The exposure assessment of UVR has not been well established and developed in workplaces due to the lack of suitable UV detecting instruments. Therefore, UV monitoring and measuring procedures were investigated and developed with commercial spectroradiometry devices described in this paper. The UVR irradiance integrated with a biological effective parameter (S lambda) represents the impacts on human skin and eyes as UV effective irradiance. The spectral weighting function derived from the American Conference of Governmental Industrial Hygienists was applied and evaluated to indicate the degree of harmfulness of UVR as a function of wavelength. A portable UV germicidal lamp with short and long wavelengths (254 nm and 365 nm) served as the UVR emission source. The UVR photon count similar to the perceived brightness of a source, irradiance, and effective irradiance (E eff) of the germicidal lamp were measured and analyzed, then the permissible exposure times (T max) were derived for UVR exposure assessment. This monitoring provided a comprehensive approach to detecting UVR magnitude, evaluated the performance of the approach, and quantified the effective exposure based on measured data. From this study, the methodology of UV measurement was established and could be applied to further UVR exposure assessment in the workplace.

Exposure assessment of aluminum arc welding radiation.

The purpose of this study is to evaluate the non-ionizing radiation (NIR) exposure, especially optical radiation levels, and potential health hazard from aluminum arc welding processes based on the American Conference of Governmental Industrial Hygienists (ACGIH) method. The irradiance from the optical radiation emissions can be calculated with various biological effective parameters [i.e., S(lambda), B(lambda), R(lambda)] for NIR hazard assessments. The aluminum arc welding processing scatters bright light with NIR emission including ultraviolet radiation (UVR), visible, and infrared spectra. The UVR effective irradiance (Eeff) has a mean value of 1,100 microW cm at 100 cm distance from the arc spot. The maximum allowance time (tmax) is 2.79 s according to the ACGIH guideline. Blue-light hazard effective irradiance (EBlue) has a mean value of 1840 microW cm (300-700 nm) at 100 cm with a tmax of 5.45 s exposure allowance. Retinal thermal hazard effective calculation shows mean values of 320 mW cm(-2) sr(-1) and 25.4 mW (cm-2) (380-875 nm) for LRetina (spectral radiance) and ERetina (spectral irradiance), respectively. From this study, the NIR measurement from welding optical radiation emissions has been established to evaluate separate types of hazards to the eye and skin simultaneously. The NIR exposure assessment can be applied to other optical emissions from industrial sources. The data from welding assessment strongly suggest employees involved in aluminum welding processing must be fitted with appropriate personal protection devices such as masks and gloves to prevent serious injuries of the skin and eyes upon intense optical exposure.

Urinary nitrite/nitrate ratio measured by isotope-dilution LC-MS/MS as a tool to screen for urinary tract infections.

Urinary tract infections (UTIs) are the most common type of nosocomial infection. Traditionally, the presence of white blood cells and microorganisms in the urine provides objective evidence for UTI diagnosis. Here, we describe the use of liquid chromatography-tandem mass spectrometry (LC-MS/MS) to measure the nitrite and nitrate levels in urine and investigate the potential of this method for UTI diagnosis. LC-MS/MS analysis was performed in positive electrospray ionization mode. After adding (15)N-labeled internal standards and derivatizing with 2,3-diaminonaphthalene (DAN), the urinary nitrite content was directly analyzed by LC-MS/MS, whereas the urinary nitrate was first reduced to nitrite before derivatization and LC-MS/MS analysis. The derivatization of nitrite and enzymatic reduction of nitrate were optimized. This method was then applied to 241 healthy subjects and 73 UTI patients. Optimization tests revealed that 1 mL of crude urine required at least 6.25 µmol of DAN to completely derivatize nitrite and 2.5 U of nitrate reductase to completely reduce nitrate to nitrite. Urinary analysis showed that the urinary concentration of nitrite and the nitrite/nitrate ratio were higher in UTI patients than in healthy subjects. Compared with the dipstick-based urinary nitrite test and using LC-MS/MS to determine the nitrite concentration (sensitivity: 23-25%), the nitrite/nitrate ratio was significantly more sensitive (95%) and exhibited a satisfactory specificity (91%) in the screening of UTIs. Taken together, the nitrite/nitrate ratio, which reflects the reducing ability of pathogenic bacteria, could be a better method for the diagnosis of UTIs that is not subject to variations in urine specimen quality.

Elevated urinary levels of carcinogenic N-nitrosamines in patients with urinary tract infections measured by isotope dilution online SPE LC-MS/MS.

N-nitrosamines (NAms) are well-documented for their carcinogenic potential. Human exposure to NAms may arise from the daily environment and endogenous formation via the reaction of secondary amines with nitrites or from bacteria infection. We describe the use of isotope dilution online solid-phase extraction (SPE) LC-MS/MS to quantify nine NAms in human urine. This method was validated and further applied to healthy subjects and patients with urinary tract infection (UTI). N-nitrosodimethylamine (NDMA), N-nitrosomethylethylamine (NMEA), N-nitrosopyrrolidine (NPYR) and N-nitrosomorpholine (NMOR) were analyzed with an APCI source, while N-nitrosodiethylamine (NDEA), N-nitrosopiperidine (NPIP), N-nitrosodi-n-propylamine (NDPA), N-nitrosodibutylamine (NDBA) and N-nitrosodiphenylamine (NDPhA) were quantified with an ESI source, due to their effect on the sensitivity and chromatography. NDMA was the most abundant N-nitrosamine, while NDPhA was firstly identified in human. UTI patients had three to twelve-fold higher concentrations for NDMA, NPIP, NDEA, NMOR and NDBA in urine than healthy subjects, and the NAms were significantly decreased after antibiotics treatment. NDMA concentrations were also significantly correlated with the pH value, leukocyte esterase activity or nitrite in urines of UTI patients. Our findings by online SPE LC-MS/MS method evidenced that UTI patients experienced various NAms exposures, especially the potent carcinogen NDMA, which was likely induced by bacteria infection.

Field evaluation of a passive sampler for assessing 2-ethoxyethyl acetate exposures.

This paper presents a field evaluation of a passive badge for measuring 2-ethoxyethyl acetate (2-EEAc) in a humid working environment. Forty-eight pairs of side-by-side active/passive 8-h full-shift personal samples were collected to evaluate the performance of a passive badge for monitoring 2-EEAc with the co-exposure of toluene and methyl iso-butyl ketone (MIBK) in a warm and humid workplace. Sixteen pairs of side-by-side passive badges, active charcoal tubes, and active charcoal tube with drying tube samples were also compared to evaluate the humidity effect in sampling. No statistical difference was found between the passive and active samples in assessing 2-EEAc. Linear regression showed the correlation to be high (r=0.987, slope=1.018, n=48) over the range 0.42-41.5 ppm. The mean concentration difference was 0.53 ppm and the mean relative error was 5.39%. Close correlation was also found between passive and active samples for assessing both toluene (r=0.949, slope=0.918, n=16), and MIBK (r=0.943, slope=1.098, n=16). Similar high correlation (r>0.962, n=16) was found among passive badges, active charcoal tubes, and active charcoal tube with drying tube samples. The humidity effect and the interference of co-exposure of polar and non-polar solvents were insignificant at a low sampling rate (26.6 ml/min) in assessing 2-EEAc exposures. The use of the passive samplers produces comparable findings to that of active sampling.

Evaluating the efficacy of a thermal exposure chamber designed for assessing workers' thermal hazard.

This study was conducted on a thermal exposure chamber designed for assessing workers' thermal hazard. In order to assess the efficacy of the studied chamber, three environmental conditions were selected to simulate high, middle and low thermal impact situations, with air temperatures (Ta) of 43.12, 36.23 and 25.77 masculine C, globe temperatures (Tg) of 44.41, 41.07 and 29.24 masculine C, relative humidity (RH) of 77, 59 and 39%, and air flow velocities (Va) of 1.70, 0.91 and 0.25 m/s, respectively. For the three specified thermal impact conditions, results show that the coefficients of variation (CVs) for Ta, Tg, RH and Va measured in the chamber studied were consistently less than 10%, except for Va under the low thermal impact condition (=50%). For each specified thermal impact condition, we generated 1,000 environmental combinations by using the Monte Carlo simulation approach according to the variations obtained from the four environmental factors. We directly adopted the ISO 7933 approach to estimate the allowable exposure time (AET) for each simulated environmental condition. This study yielded a range in the 95% confidence interval (95% CI) of the estimated AETs for the three specified thermal impact conditions which were consistently less than 5 min. We further conducted the sensitivity analysis to examine the effect of the four environmental factors on estimating AETs. We found Va was the least important factor in estimating AETs for any specified thermal impact condition. In conclusion, although Va was found with great variation for the chamber specified in the low thermal impact condition, the exposure chamber studied can still be regarded as a feasible one for assessing workers' thermal hazard.

Oxidative damage in foundry workers occupationally co-exposed to PAHs and metals.

Occupational exposure to polycyclic aromatic hydrocarbons (PAHs) has been reported in foundries. A higher risk for DNA damage or oxidative damage lesions was also found in occupationally PAH-exposed groups. The aim of this study was to assess PAH exposure by urinary excretion of 1-hydroxypyrene (1-OHP), a biological exposure marker. Furthermore, we aimed to evaluate the oxidative damage of foundry workers with different job tasks and the association between 1-OHP, metal exposure and oxidative damage in foundry workers exposed to pervasive carcinogens. A higher concentration of 1-OHP was found in the exposed group (0.322+/-0.289 microg/g creatinine) relative to the control group (0.178+/-0.289 microg/g creatinine) (p<0.05). Moreover, higher levels of 1-OHP were found in workers involved in manufacturing processes (0.346 microg/g creatinine) compared to administrative workers (0.018 microg/g creatinine). A positive correlation was identified between levels of 1-OHP and 8-hydroxydeoxyguanosine (8-OH-dG), DNA strand breakage and malondialdehyde (MDA) in all study subjects. However, when foundry workers were considered based on their specific job categories, a similar trend for 1-OHP and three oxidative damage markers was only found for DNA strand breakage, but not for 8-OH-dG or MDA. Other factors such as furnace equipment, PAH types, and job categories may contribute to different PAH emissions. The study also suggested that co-exposure to metal and PAHs, and smoking status in foundry industries may also cause the oxidative damage in foundry workers.

Risk assessment of gaseous/particulate phase PAH exposure in foundry industry.

Thirty-seven air samplings in different working areas of two foundry industries were collected to assess polycyclic aromatic hydrocarbon (PAH) levels. The average PAH level inside Foundry A was 19.56 microg/m(3), which was higher than that in Foundry B (8.26 microg/m(3)), whereas for the benzo[a]pyrene toxic equivalent (BaPeq) level (38.81 ng/m(3) vs. 46.52 ng/m(3)). A higher PAH level was found for big moulding process than for the small one, and the chemical binder in the different size moulds was hypothesized to be the main cause. The higher PAH levels were found in the painting area (95.51 microg/m(3)), pouring area (18.42 microg/m(3)), and inside the office (16.48 microg/m(3)); as well as the higher BaPeq level was in the painting area (152.3 ng/m(3)), and the furnace for melting iron (96.9 ng/m(3)). The gas phase (over 90%) was the major contributor of total PAHs in the manufacturing areas. Moreover, health risk assessment of PAHs exposure showed that lung cancer risks were 9.06x10(-4) and 1.09x10(-3) in Foundries A and B, respectively. This study suggests that the workers shall use appropriate respiratory masks in painting, melting, and pouring areas to prevent their occupational exposure to PAHs.