2D Ruthenium-Chromium Oxide with Rich Grain Boundaries Boosts Acidic Oxygen Evolution Reaction Kinetics.

Ruthenium oxide is currently considered as the promising alternative to Ir-based catalysts employed for proton exchange membrane water electrolyzers but still faces the bottlenecks of limited durability and slow kinetics. Herein, a 2D amorphous/crystalline heterophase ac-Cr0.53Ru0.47O2-δ substitutional solid solution with pervasive grain boundaries (GBs) is developed to accelerate the kinetics of acidic oxygen evolution reaction (OER) and extend the long-term stability simultaneously. The ac-Cr0.53Ru0.47O2-δ shows a super stability with a slow degradation rate and a remarkable mass activity of 455 A gRu -1 at 1.6 V vs RHE, which is ≈3.6- and 5.9-fold higher than those of synthesized RuO2 and commercial RuO2, respectively. The strong interaction of Cr-O-Ru local units in synergy with the specific 2D structural characteristics of ac-Cr0.53Ru0.47O2-δ dominates its enhanced stability. Meanwhile, high-density GBs and the shortened Ru-O bonds tailored by amorphous/crystalline structure and Cr-O-Ru interaction regulate the adsorption and desorption rates of oxygen intermediates, thus accelerating the overall acidic OER kinetics.

Synergistic Effect of Grain Boundaries and Oxygen Vacancies on Enhanced Selectivity for Electrocatalytic CO2 Reduction.

Dual-engineering involved of grain boundaries (GBs) and oxygen vacancies (VO) efficiently engineers the material's catalytic performance by simultaneously introducing favorable electronic and chemical properties. Herein, a novel SnO2 nanoplate is reported with simultaneous oxygen vacancies and abundant grain boundaries (V,G-SnOx/C) for promoting the highly selective conversion of CO2 to value-added formic acid. Attributing to the synergistic effect of employed dual-engineering, the V,G-SnOx/C displays highly catalytic selectivity with a maximum Faradaic efficiency (FE) of 87% for HCOOH production at -1.2 V versus RHE and FEs > 95% for all C1 products (CO and HCOOH) within all applied potential range, outperforming current state-of-the-art electrodes and the amorphous SnOx/C. Theoretical calculations combined with advanced characterizations revealed that GB induces the formation of electron-enriched Sn site, which strengthens the adsorption of *HCOO intermediate. While GBs and VO synergistically lower the reaction energy barrier, thus dramatically enhancing the intrinsic activity and selectivity toward HCOOH.

Substantial Impact of Built-in Electric Field and Electrode Potential on the Alkaline Hydrogen Evolution Reaction of Ru-CoP Urchin Arrays.

Although great efforts on the delicate construction of a built-in electric field (BIEF) to modify the electronic properties of active sites have been conducted, the substantial impact of BIEF coupled with electrode potential on the electrochemical reactions has not been clearly investigated. Herein, we designed an alkaline hydrogen evolution reaction (HER) catalyst composed of heterogeneous Ru-CoP urchin arrays on carbon cloth (Ru-CoP/CC) with a strong BIEF with the guidance of density functional theory (DFT) calculations. Impressively, despite its unsatisfactory activity at 10 mA cm-2 (overpotential of 44 mV), Ru-CoP/CC exhibited better activity (357 mV) than the benchmark Pt/C catalyst (505 mV) at 1 A cm-2 . Experimental and theoretical studies revealed that strong hydrogen adsorption on the interfacial Ru atoms created a high energy barrier for hydrogen desorption and spillover, resulting in unsatisfactory activity at low current densities. However, as the electrode potential became more negative (i.e., the current density increased), the barrier for hydrogen spillover from the interfacial Ru to the Co site, which had near-zero hydrogen adsorption energy, significantly decreased, thus greatly accelerating the whole alkaline HER process. This explains why the activity of Ru-CoP is relatively susceptible to the electrode potential compared to Pt/C.

Grain Boundary Tailors the Local Chemical Environment on Iridium Surface for Alkaline Electrocatalytic Hydrogen Evolution.

Even though grain boundaries (GBs) have been previously employed to increase the number of active catalytic sites or tune the binding energies of reaction intermediates for promoting electrocatalytic reactions, the effect of GBs on the tailoring of the local chemical environment on the catalyst surface has not been clarified thus far. In this study, a GBs-enriched iridium (GB-Ir) was synthesized and examined for the alkaline hydrogen evolution reaction (HER). Operando Raman spectroscopy and density functional theory (DFT) calculations revealed that a local acid-like environment with H3 O+ intermediates was created in the GBs region owing to the electron-enriched surface Ir atoms at the GBs. The H3 O+ intermediates lowered the energy barrier for water dissociation and provided enough hydrogen proton to promote the generation of hydrogen spillover from the sites at the GBs to the sites away from the GBs, thus synergistically enhancing the hydrogen evolution activity. Notably, the GB-Ir catalyst exhibited a high alkaline HER activity (10 mV @ 10 mA cm-2 , 20 mV dec-1 ). We believe that our findings will promote further research on GBs and the surface science of electrochemical reactions.

Switching Product Selectivity in CO2 Electroreduction via Cu-S Bond Length Variation.

Regulating competitive reaction pathways to direct the selectivity of electrochemical CO2 reduction reaction toward a desired product is crucial but remains challenging. Herein, switching product from HCOOH to CO is achieved by incorporating Sb element into the CuS, in which the Cu-S ionic bond is coupled with S-Sb covalent bond through bridging S atoms that elongates the Cu-S bond from 2.24 Å to 2.30 Å. Consequently, CuS with a shorter Cu-S bond exhibited a high selectivity for producing HCOOH, with a maximum Faradaic efficiency (FE) of 72%. Conversely, Cu3SbS4 characterized by an elongated Cu-S bond exhibited the most pronounced production of CO with a maximum FE of 60%. In situ spectroscopy combined with density functional theory calculations revealed that the altered Cu‒S bond length and local coordination environment make the *HCOO binding energy weaker on Cu3SbS4 compared to that on CuS. Notably, a volcano-shaped correlation between the Cu-S bond length and adsorption strength of *COOH indicates that Cu-S in Cu3SbS4 as double-active sites facilitates the adsorption of *COOH, and thus results in the high selectivity of Cu3SbS4 toward CO.

Constructing Interfacial Oxygen Vacancy and Ruthenium Lewis Acid-Base Pairs to Boost the Alkaline Hydrogen Evolution Reaction Kinetics.

Simultaneous optimization of the energy level of water dissociation, hydrogen and hydroxide desorption is the key to achieving fast kinetics for the alkaline hydrogen evolution reaction (HER). Herein, the well-dispersed Ru clusters on the surface of amorphous/crystalline CeO2-δ (Ru/ac-CeO2-δ ) is demonstrated to be an excellent electrocatalyst for significantly boosting the alkaline HER kinetics owing to the presence of unique oxygen vacancy (VO ) and Ru Lewis acid-base pairs (LABPs). The representative Ru/ac-CeO2-δ exhibits an outstanding mass activity of 7180 mA mgRu -1 that is approximately 9 times higher than that of commercial Pt/C at the potential of -0.1 V (V vs RHE) and an extremely low overpotential of 21.2 mV at a geometric current density of 10 mA cm-2 . Experimental and theoretical studies reveal that the VO as Lewis acid sites facilitate the adsorption of H2 O and cleavage of H-OH bonds, meanwhile, the weak Lewis basic Ru clusters favor for the hydrogen desorption. Importantly, the desorption of OH from VO sites is accelerated via a water-assisted proton exchange pathway, and thus boost the kinetics of alkaline HER. This study sheds new light on the design of high-efficiency electrocatalysts with LABPs for the enhanced alkaline HER.

MnOx Film-Coated NiFe-LDH Nanosheets on Ni Foam as Selective Oxygen Evolution Electrocatalysts for Alkaline Seawater Oxidation.

Compared to freshwater electrolysis, seawater electrolysis to produce hydrogen is preferable and more promising, but this technology is plagued by the electrode's corrosion and oxidative reactions of the competitive Cl- ion on the anode. To develop efficient oxygen evolution reaction (OER) catalysts for seawater electrolysis, the ultrathin MnOx film-covered NiFe-layered double-hydroxide nanosheet array is directly assembled on Ni foam (MnOx/NiFe-LDH/NF) by hydrothermal and electrodeposition in turn. This catalyst demonstrates excellent OER-selective activity in alkaline saline electrolytes. In 1 M KOH/0.5 M NaCl and 1 M KOH/seawater electrolytes, MnOx/NiFe-LDH/NF exhibits lower overpotentials at 100 mA cm-2 (η100 values of 265 and 276 mV, respectively) and Tafel slopes (73 and 77 mV decade-1, respectively) than does the NiFe-LDH/NF electrode (η100 values of 298 and 327 mV and Tafel slopes of 91 and 140 mV decade-1, respectively). In alkaline saline solutions, the stability and durability of the former are also better than those of the latter. The good OER selectivity and catalytic performance are attributed to the MnOx overlayer that selectively blocks Cl- anions from approaching catalytic centers, and the good conductivity, fast kinetics, more oxygen vacancies, and abundant active sites of MnOx/NiFe-LDH/NF. The robust stability is due to the enhanced resistance for Cl- corrosion stemming from the MnOx protective film. Hence, MnOx/NiFe-LDH/NF can act as a promising OER electrocatalyst for alkalized natural seawater electrolysis.

Boosting Hydrogen Evolution Reaction by Phase Engineering and Phosphorus Doping on Ru/P-TiO2.

Synergistic optimization of the elementary steps of water dissociation and hydrogen desorption for the hydrogen evolution reaction (HER) in alkaline media is a challenge. Herein, the Ru cluster anchored on a trace P-doped defective TiO2 substrate (Ru/P-TiO2 ) was synthesized as an electrocatalyst for the HER; it exhibited a commercial Pt/C-like geometric activity and an excellent mass activity of 9984.3 mA mgRu -1 at -0.05 V vs. RHE, which is 34.3 and 18.7 times higher than that of Pt/C and Ru/TiO2 , respectively. Experimental and theoretical studies indicated that using a rutile-TiO2 -crystal-phase substrate enhanced the HER activity more than the anatase phase. Rich surface oxygen vacancies on rutile-TiO2 facilitated the adsorption and dissociation of water, while the partial substitution of Ti4+ with P5+ enhanced H2 generation by facilitating hydrogen spillover from the Ru site to the surface P site, synergistically enhancing the HER activity.

GCN-BMP: Investigating graph representation learning for DDI prediction task.

One drug's pharmacological activity may be changed unexpectedly, owing to the concurrent administration of another drug. It is likely to cause unexpected drug-drug interactions (DDIs). Several machine learning approaches have been proposed to predict the occurrence of DDIs. However, existing approaches are almost dependent heavily on various drug-related features, which may incur noisy inductive bias. To alleviate this problem, we investigate the utilization of the end-to-end graph representation learning for the DDI prediction task. We establish a novel DDI prediction method named GCN-BMP (Graph Convolutional Network with Bond-aware Message Propagation) to conduct an accurate prediction for DDIs. Our experiments on two real-world datasets demonstrate that GCN-BMP can achieve higher performance compared to various baseline approaches. Moreover, in the light of the self-contained attention mechanism in our GCN-BMP, we could find the most vital local atoms that conform to domain knowledge with certain interpretability.

Sodium-Decorated Amorphous/Crystalline RuO2 with Rich Oxygen Vacancies: A Robust pH-Universal Oxygen Evolution Electrocatalyst.

The oxygen evolution reaction (OER) is a key reaction for many electrochemical devices. To date, many OER electrocatalysts function well in alkaline media, but exhibit poor performances in neutral and acidic media, especially the acidic stability. Herein, sodium-decorated amorphous/crystalline RuO2 with rich oxygen vacancies (a/c-RuO2 ) was developed as a pH-universal OER electrocatalyst. The a/c-RuO2 shows remarkable resistance to acid corrosion and oxidation during OER, which leads to an extremely high catalytic stability, as confirmed by a negligible overpotential increase after continuously catalyzing OER for 60 h at pH=1. Besides, a/c-RuO2 also exhibits superior OER activities to commercial RuO2 and most reported OER catalysts under all pH conditions. Theoretical calculations indicated that the introduction of Na dopant and oxygen vacancy in RuO2 weakens the adsorption strength of the OER intermediates by engineering the d-band center, thereby lowering the energy barrier for OER.

The Heterostructure of Ru2 P/WO3 /NPC Synergistically Promotes H2 O Dissociation for Improved Hydrogen Evolution.

Facilitating the dissociation of water and desorption of hydrogen are both crucial challenges for improving the hydrogen evolution reaction (HER) in alkaline media. Herein, we report the synthesis of heterostructure of Ru2 P/WO3 @NPC (N, P co-doped carbon) by a simple hydrothermal reaction using ruthenium and tungsten salts as precursors, followed by pyrolyzing under an Ar atmosphere. The Ru2 P/WO3 @NPC electrocatalyst exhibits an outstanding HER activity with an overpotential of 15 mV at a current density of 10 mA cm-2 and excellent durability in a 1.0 M KOH solution, outperforming state-of-the-art Pt/C and most reported electrocatalysts. Experimental results combined with density functional calculations reveal that the electron density redistribution in Ru2 P/WO3 @NPC is achieved by electron transfer from NPC to Ru2 P/WO3 and from Ru2 P to WO3 , which directly promotes the dissociation of water on W sites in WO3 and desorption of hydrogen on Ru sites in Ru2 P.

MoS2 /NiS Yolk-Shell Microsphere-Based Electrodes for Overall Water Splitting and Asymmetric Supercapacitor.

Rational designing of the composition and structure of electrode material is of great significance for achieving highly efficient energy storage and conversion in electrochemical energy devices. Herein, MoS2 /NiS yolk-shell microspheres are successfully synthesized via a facile ionic liquid-assisted one-step hydrothermal method. With the favorable interface effect and hollow structure, the electrodes assembled with MoS2 /NiS hybrid microspheres present remarkably enhanced electrochemical performance for both overall water splitting and asymmetric supercapacitors. In particular, to deliver a current density of 10 mA cm-2 , the MoS2 /NiS-based electrolysis cell for overall water splitting only needs an output voltage of 1.64 V in the alkaline medium, lower than that of Pt/C-IrO2 -based electrolysis cells (1.70 V). As an electrode for supercapacitors, the MoS2 /NiS hybrid microspheres exhibit a specific capacitance of 1493 F g-1 at current density of 0.2 A g-1 , and remain 1165 F g-1 even at a large current density of 2 A g-1 , implying outstanding charge storage capacity and excellent rate performance. The MoS2 /NiS- and active carbon-based asymmetric supercapacitor manifests a maximum energy density of 31 Wh kg-1 at a power density of 155.7 W kg-1 , and remarkable cycling stability with a capacitance retention of approximately 100% after 10 000 cycles.

Antimony-Based Composites Loaded on Phosphorus-Doped Carbon for Boosting Faradaic Efficiency of the Electrochemical Nitrogen Reduction Reaction.

A nanocomposite of PC/Sb/SbPO4 (PC, phosphorus-doped carbon) exhibits a high activity and an excellent selectivity for efficient electrocatalytic conversion of N2 to NH3 in both acidic and neutral electrolytes under ambient conditions. At a low reductive potential of -0.15 V versus the reversible hydrogen electrode (RHE), the PC/Sb/SbPO4 catalyst achieves a high Faradaic efficiency (FE) of 31 % for ammonia production in 0.1 m HCl under mild conditions. In particular, a remarkably high FE value of 34 % is achieved at a lower reductive potential of -0.1 V (vs. RHE) in a 0.1 m Na2 SO4 solution, which is better than most reported electrocatalysts towards the nitrogen reduction reaction (NRR) in neutral electrolyte under mild conditions. The change in surface species and electrocatalytic performance before and after N2 reduction is explored by an ex situ method. PC and SbPO4 are both considered as the active species that enhanced the performance of NRR.

Integrating NiCo Alloys with Their Oxides as Efficient Bifunctional Cathode Catalysts for Rechargeable Zinc-Air Batteries.

The lack of high-efficient, low-cost, and durable bifunctional electrocatalysts that act simultaneously for the oxygen reduction reaction (ORR) and the oxygen evolution reaction (OER) is currently one of the major obstacles to commercializing the electrical rechargeability of zinc-air batteries. A nanocomposite CoO-NiO-NiCo bifunctional electrocatalyst supported by nitrogen-doped multiwall carbon nanotubes (NCNT/CoO-NiO-NiCo) exhibits excellent activity and stability for the ORR/OER in alkaline media. More importantly, real air cathodes made from the bifunctional NCNT/CoO-NiO-NiCo catalysts further demonstrated superior performance to state-of-the-art Pt/C or Pt/C+IrO2 catalysts in primary and rechargeable zinc-air batteries.

Nickel-rich layered lithium transition-metal oxide for high-energy lithium-ion batteries.

High energy-density lithium-ion batteries are in demand for portable electronic devices and electrical vehicles. Since the energy density of the batteries relies heavily on the cathode material used, major research efforts have been made to develop alternative cathode materials with a higher degree of lithium utilization and specific energy density. In particular, layered, Ni-rich, lithium transition-metal oxides can deliver higher capacity at lower cost than the conventional LiCoO2 . However, for these Ni-rich compounds there are still several problems associated with their cycle life, thermal stability, and safety. Herein the performance enhancement of Ni-rich cathode materials through structure tuning or interface engineering is summarized. The underlying mechanisms and remaining challenges will also be discussed.

Graphene-ruthenium complex hybrid photodetectors with ultrahigh photoresponsivity.

The maximum responsivity of a pure monolayer graphene-based photodetector is currently less than 10 mA W(-1) because of small optical absorption and short recombination lifetime. Here, a graphene hybrid photodetector functionalized with a photoactive ruthenium complex that shows an ultrahigh responsivity of ≈1 × 10(5) A W(-1) and a photoconductive gain of ≈3 × 10(6) under incident optical intensity of the order of sub-milliwatts is reported. This responsivity is two orders of magnitude higher than the precedent best performance of graphene-based photodetectors under a similar incident light intensity. Upon functionalization with a 4-nm-thick ruthenium complex, monolayer graphene-based photodetectors exhibit pronounced n-type doping effect due to electron transfer via the metal-ligand charge transfer (MLCT) from the ruthenium complex to graphene. The ultrahigh responsivity is attributed to the long lifetime and high mobility of the photoexcited charge carriers. This approach is highly promising for improving the responsivity of graphene-based photodetectors.

A Sustainable Route to Ruthenium Phosphide (RuP)/Ru Heterostructures with Electron-Shuttling of Interfacial Ru for Efficient Hydrogen Evolution.

Ruthenium (Ru) is a promising electrocatalyst for the hydrogen evolution reaction (HER), despite suffering from low activity in non-acidic conditions due to the high kinetic energy barrier of H2O dissociation. Herein, the synthesis of carbon nanosheet-supported RuP/Ru heterostructures (RuP/Ru@CNS) from a natural polysaccharide is reported and demonstrates its behavior as an effective HER electrocatalyst in non-acidic conditions. The RuP/Ru@CNS exhibits low overpotential (106 mV at 200 mA·cm-2) in alkaline electrolyte, exceeding most reported Ru-based electrocatalysts. The electron shuttling between Ru atoms at the RuP/Ru interface results in a lowered energy barrier for H2O dissociation by electron-deficient Ru atoms in the pure Ru phase, as well as optimized H* adsorption of electron-gaining Ru atoms in the neighboring RuP. A low H* spillover energy barrier between Ru atoms at the RuP/Ru interface further boosts HER kinetics. This study demonstrates a sustainable method for the fabrication of efficient Ru-based electrocatalysts and provides a more detailed understanding of interface effects in HER catalysis.

Does the oxidation of nitric oxide by oxyMyoglobin share an intermediate with the metMyoglobin-catalyzed isomerization of peroxynitrite?

The reaction of nitric oxide with oxy-myoglobin (oxyMb) to form ferric myoglobin (metMb) and nitrate, and the metMb-catalyzed isomerization of peroxynitrite to nitrate, have long been assumed to proceed via the same iron-bound peroxynitrite intermediate (metMb(OONO)). More recent research showed that the metMb-catalyzed isomerization of peroxynitrite to nitrate produces detectable amounts of nitrogen dioxide and ferryl myoglobin (ferrylMb). This suggests a mechanism in which the peroxynitrite binds to the metMb, ferrylMb is transiently generated by dissociation of NO2, and nitrate is formed when the NO2 nitrogen attacks the ferrylMb oxo ligand. The presence of free NO2 and ferrylMb products reveals that small amounts of NO2 escape from myoglobin's interior before recombination can occur. Free NO2 and ferrylMb should also be generated in the reaction of oxyMb with NO, if the common intermediate metMb(OONO) is formed. However, this report presents a series of time-resolved UV/vis spectroscopy experiments in which no ferrylMb was detected when oxyMb and NO reacted. The sensitivity of the methodology is such that as little as 10% of the ferrylMb predicted from the experiments with metMb and peroxynitrite should have been detectable. These results lead to the conclusion that the oxyMb + NO and metMb + ONOO(-) reactions do not proceed via a common intermediate as previously thought. The conclusion has significant implications for researchers that propose a possible role of oxyMb in intracellular NO regulation, because it means that toxic NO2 and ferrylMb are not generated during NO oxidation by this species.

Competition between Lattice Oxygen and Adsorbate Evolving Mechanisms in Rutile Ru-Based Oxide for the Oxygen Evolution Reaction.

The oxygen evolution reaction (OER) is the primary bottleneck for electrochemical splitting of water into H2. Developing robust and active OER electrocatalysts through understanding the OER mechanism is essential. However, the mechanism for OER is not yet well understood even for the most studied rutile Ru-based oxide, especially in a water-solvent environment. It is still disputed whether the adsorbate evolving mechanism (AEM) is competitive with the lattice oxygen mechanism (LOM). In this article, the AEM and LOM for OER in transition metal (TM)-doped rutile RuO2 with different ratios of TM and Ru are discussed through density functional theory + U calculation. In low TM doping concentration, the evolved O2 is generated through the AEM, and the OER activity is limited by the scaling relationship of OER intermediates. In higher TM doping concentration, the evolved O2 is generated through the LOM for Cu- or Ni-doped RuO2. We find that the distribution of Ru 4d and O 2p orbitals and the adsorption energy of H and O are the major factors that affect the conversion of AEM into LOM. By explicitly considering the water-solvent environment, the LOM can result in higher theoretical OER activity arising from the effects of hydrogen-bond networks.

Fabrication of Ru/WO3-W2N/N-doped carbon sheets for hydrogen evolution reaction.

Recent experimental analysis indicates WO3-based nanostructures exhibit poor hydrogen evolution reactivity, particularly in alkaline medium, arising from the low electron transfer rate. It is imperative to tune the composition and structure of WO3 to boost the cleavage of H-OH bond. Here, we construct Ru/WO3-W2N/N-doped carbon sheets (Ru/WO3-W2N/NC) using m-WO3 nanosheets as precursors with the aid of RuCl3, Tris (hydroxymethyl) aminomethane, and dopamine. Structural investigation reveals the formation of N-doped carbon sheets, Ru nanoparticles, and WO3-W2N. As a result, hydrogen evolution reactivity is greatly improved on Ru/WO3-W2N/N-doped carbon sheets with 64 mV at 10 mA/cm2 in 1 mol/L (M) KOH, outperforming most of WO3-based electrocatalysts in previous literatures. Meanwhile, it facilitates the generation of H2 in 0.5 M H2SO4 with the excellent activity of 110 mV at 10 mA/cm2. Our work provides an efficient strategy to tailor the electronic structure of WO3 to catalyze acidic and alkaline hydrogen evolution reaction.