Treatment of severe Class II skeletal malocclusion in a hyperdivergent adult patient via hybrid clear aligner approach: A case report.

This case report describes the camouflage treatment of an adult patient with hyperdivergent facial pattern presenting with severe Class II skeletal malocclusion, through the use of a hybrid clear aligner approach, that relies on both a partial lingual fixed appliance and the continuous use of Class II elastics throughout therapy. After 11 months of treatment, the goals had been achieved, highlighting that the correct diagnostic framework, proper patient selection and careful digital planning of a compromise treatment can provide satisfactory aesthetic and functional outcomes.

Analysis of biological and structural factors implicated in the clinical success of orthodontic miniscrews at posterior maxillary interradicular sites.

OBJECTIVE: This study aims to evaluate success factors implicated in clinical orthodontic miniscrew stability after their interradicular placement in maxilla. MATERIALS AND METHODS: Six hundred seventy-six miniscrews were inserted in maxillary interradicular sites in a sample of 276 patients (109 males and 167 females; mean age 19 ± 1.7 years) and immediately loaded. Percentage failure rate was recorded, and the influence of the following factors was investigated: structural (miniscrew length, diameter and body shape), operative (side of insertion site, pilot hole drilling or not) and biological (maximal insertion torque [MIT] and type of gingiva). A chi-square test with Monte Carlo correction was performed to detect the influence of these variables on the failure rate of orthodontic miniscrews. Then both multivariate logistic regression and post hoc analysis were performed, followed by classification and regression tree (CART) analysis. RESULTS: The average success rate was 88%. The principal factors implicated in the failure rate were miniscrew length, MIT values and type of gingiva. Specifically, 8 mm miniscrew length, alveolar mucosa and 5-10 Ncm MIT values were linked to higher failure rates. According to CART, the main variable influencing failure is miniscrew length (≤ 8 mm for higher failure rates). For others, MIT values of 5-10 Ncm are linked to higher failure rates (p < 0.05). CONCLUSION: Orthodontic miniscrews inserted in the maxilla display good success rates. However, clinicians should be discouraged from using miniscrews of length ≤ 8 mm and MIT values < 10 Ncm, even with longer miniscrews. CLINICAL RELEVANCE: Information about factors related to failure rate of miniscrews placed at posterior maxillary interradicular sites is given.

Nine weeks versus 1 year adjuvant trastuzumab in combination with chemotherapy: final results of the phase III randomized Short-HER study‡.

Background: Chemotherapy plus 1-year trastuzumab is the standard adjuvant treatment of HER2-positive breast cancer. The efficacy of less extended trastuzumab exposure is under investigation. The short-HER study was aimed to assess the non-inferiority of 9 weeks versus 1 year of adjuvant trastuzumab combined with chemotherapy. Patients and methods: HER2-positive breast cancer patients with node-positive or, if node negative, with at least one risk factor (pT>2 cm, G3, lympho-vascular invasion, Ki-67 > 20%, age ≤35 years, or hormone receptor negativity) were randomly assigned to receive sequential anthracycline-taxane combinations plus 1-year trastuzumab (arm A, long) or plus 9 weeks trastuzumab (arm B, short). This study was designed as a non-inferiority trial with disease-free survival (DFS) as primary end point. A DFS hazard ratio (HR) <1.29 was chosen as the non-inferiority margin. Analyses according to the frequentist and Bayesian approach were planned. Secondary end points included 2-year failure rate and cardiac safety. Results: A total of 1254 patients from 82 centers were randomized (arm A, long: n = 627; arm B, short: n = 626). Five-year DFS is 88% in the long and 85% in the short arm. The HR is 1.13 (90% CI 0.89-1.42), with the upper limit of the CI crossing the non-inferiority margin. According to the Bayesian analysis, the probability that the short arm is non-inferior to the long one is 80%. The 5-year overall survival (OS) is 95.2% in the long and 95.0% in the short arm (HR 1.07, 90% CI 0.74-1.56). Cardiac events are significantly lower in the short arm (risk-ratio 0.33, 95% CI 0.22-0.50, P < 0.0001). Conclusions: This study failed to show the non-inferiority of a shorter trastuzumab administration. One-year trastuzumab remains the standard. However, a 9-week administration decreases the risk of severe cardiac toxicity and can be an option for patients with cardiac events during treatment and for those with a low risk of relapse. Trial Registration: EUDRACT number: 2007-004326-25; NCI ClinicalTrials.gov number: NCT00629278.

Psychological impairments burden and spirituality in caregivers of terminally ill cancer patients.

The role of spirituality on the psychological health was mostly investigated through studies conducted in terminally ill patients. However, there are not studies investigating the role of religious and spiritual beliefs on psychological state and on burden dimensions in caregivers. The purpose of this study was to investigate the association between spirituality, burden, and psychological state in caregivers of terminally ill cancer patients. Two hundred caregivers of terminally ill patients with cancer were interviewed using Prolonged Grief Disorder 12 (PG-12), Hamilton Anxiety Rating Scale (HAM-A), Hamilton Depression Scale (HAM-D), Caregiver Burden Inventory (CBI) and System of Belief Inventory (SBI-15R). The caregiver burden was positively correlated with anxiety, depression and PG-12 scores. The intrinsic spirituality was a significant predictor of the time-dependence burden (positively associated); and of the emotional burden (negatively associated). In caregivers of terminally ill cancer patients, higher levels of intrinsic spirituality predicted a higher amount of time devote to caregiving, and also protected against the emotional distress linked to providing assistance.

Phonetic analysis during treatment with rapid maxillary expander.

OBJECTIVES: To investigate possible changes and/or device-related impairments in phonetic habits produced by rapid maxillary expansion (RME). MATERIALS AND METHODS: Thirty-five patients scheduled for RME were divided into two groups: Group A (banded two-arm Hyrax) and Group B (banded four-arm Hyrax). Speech samples were collected at six time points, before, during and after RME removal. Acoustical analysis was performed using PRAAT and BioVoice analysis tools. Ten volunteers completed a questionnaire on the acceptability of patient's speech. Maxillary dimensions and palatal volume were measured on dental casts before and after expansion using a digital gauge. RESULTS: Voice analysis showed an increase in the peak frequency of fricative consonants (/s/,/ʃ/) after expansion, whereas there was no change of formant frequencies of palatal consonants (/ɲ/,/ʎ/). Vowel /i/ displayed a lowering of the first formant frequency, and an increase in the second and third formant frequencies. After bonding, Group B showed both a greater reduction in the peak frequency of fricatives and a greater increase in the formant frequencies of palatal consonants than Group A. CONCLUSION: Rapid maxillary expansion causes a slight phonetic change in the acoustical parameters of both consonants and vowels. The two-arm Hyrax caused less speech impairment than the four-arm Hyrax during the treatment.

Temporomandibular disorders and dental occlusion. A systematic review of association studies: end of an era?

To answer a clinical research question: 'is there any association between features of dental occlusion and temporomandibular disorders (TMD)?' A systematic literature review was performed. Inclusion was based on: (i) the type of study, viz., clinical studies on adults assessing the association between TMD (e.g., signs, symptoms, specific diagnoses) and features of dental occlusion by means of single or multiple variable analysis, and (ii) their internal validity, viz., use of clinical assessment approaches to TMD diagnosis. The search accounted for 25 papers included in the review, 10 of which with multiple variable analysis. Quality assessment showed some possible shortcomings, mainly related with the unspecified representativeness of study populations. Seventeen (N = 17) articles compared TMD patients with non-TMD individuals, whilst eight papers compared the features of dental occlusion in individuals with TMD signs/symptoms and healthy subjects in non-patient populations. Findings are quite consistent towards a lack of clinically relevant association between TMD and dental occlusion. Only two (i.e., centric relation [CR]-maximum intercuspation [MI] slide and mediotrusive interferences) of the almost forty occlusion features evaluated in the various studies were associated with TMD in the majority (e.g., at least 50%) of single variable analyses in patient populations. Only mediotrusive interferences are associated with TMD in the majority of multiple variable analyses. Such association does not imply a causal relationship and may even have opposite implications than commonly believed (i.e., interferences being the result, and not the cause, of TMD). Findings support the absence of a disease-specific association. Based on that, there seems to lack ground to further hypothesise a role for dental occlusion in the pathophysiology of TMD. Clinicians are encouraged to abandon the old gnathological paradigm in TMD practice.

Clinical outcome of a two-piece implant system with an internal hexagonal connection: a prospective study.

The purpose of this prospective clinical study was to evaluate the survival rate (SVR - i.e. fixtures still in place at the end of the observation period) and success rate (SCR - i.e. bone resorption around implant neck) of an implant system characterized by cylindrical and tapered implants, both provided with an internal hexagonal connection. In the period between January 1996 and October 2011, 52 implants with internal hexagonal connection were inserted in 21 females and 31 males, mean age 54±11 years. The mean post-surgical follow-up was 44.6±34.4 months. Several parameters were evaluated as potential outcome conditioners: age, gender, smoking, replaced tooth, periodontal disease, fixture shape (i.e. cylindrical or tapered), jaw location (i.e. maxilla or mandible), bone graft, immediate loading, post-extractive placement, type of prosthesis (i.e. single crown or bridge), edentulism, implant diameter and length. An SPSS statistical program was used and Cox regression analysis performed. SVR was 100% since no fixtures were lost. SCR, expressed through the mean marginal bone loss, was 77%. No significant differences were found, for most of the parameters analyzed, with the exception of prosthetic bridges, where implants supporting this type of rehabilitation showed a worse clinical outcome in comparison to single crown rehabilitations. Internal hexagonal connection is a reliable tool for oral rehabilitation.

Maxillary sinus by-pass with tilted implants via tapered-screw bone expanders in low density bone: one year follow -up of a case series.

In the present paper the use of tapered-screw bone expanders (TSBEs) is proposed, in combination with the placement of tilted implants in close proximity to the anterior sinus wall, solving the problem of the reduced height of the alveolar bone in the sub-antral area. The Authors named the procedure: Tilted Implant Expansion Osteotomy (TIEO). Fifteen patients (10 females and 5 males, mean age 47.8±8.15 years) with distal edentulous maxillae were enrolled in this study. For each edentulous site 2 implants were placed, the anterior implant in the area of the most anterior missing tooth while, the posterior implant, immediately in front of the maxillary sinus, with an inclined position. Adopting the aforesaid procedure, 34 cylindrical two-piece implants were placed, 17 of which were placed in tilted position, in order to by-pass the maxillary sinus. After a healing period of 4-6 months, the second stage surgery was performed. The cases were finalized by metal-ceramic cementable restorations with a variable number of elements, from 2 to 4, without any cantilever element. The post finalization follow-up was at 12 months. Survival rate was 100% since no fixtures were lost. At the one-year follow-up the clinical and radiological appearance of the soft and hard tissues was optimal and no pathological signs were recorded. TIEO is a promising surgical procedure for oral rehabilitation of maxillary edentulous sites and represents a therapeutic alternative to sinus lift techniques.

A prospective evaluation of outcomes of two tapered implant systems.

The purpose of this prospective clinical study was to evaluate survival rate (SVR - i.e. fixtures still in place at the end of the observation period) and success rate (SCR - i.e. bone resorption around the implant neck) of two tapered implant systems. Both systems were equipped with a tapered connection, one requiring bone-level (BL) placement, while the other required soft-tissue-level (STL) placement. In the period between January 1996 and October 2011, 133 fixtures were inserted, 90 in females and 43 in males, with a mean age of 60±11 years. The mean post-surgical follow-up was 64±38 months. Several clinical parameters were evaluated as potential outcome conditioners. An SPSS program was used for statistical analysis and a Cox analysis was performed. The SVR was 100% since no fixtures were lost. SCR, expressed through the mean marginal bone loss, was 88%. No significant differences were found, for most of the variables investigated with the exception of bone grafting and implant type: STL implants showed a better clinical outcome than BL implants when bone grafting was performed simultaneously with implant placement. Tapered implants are reliable devices for oral rehabilitation of jaws.

Endoscopically controlled hydraulic sinus lift in combination with rotary instruments: one-year follow-up of a case series.

The aim of this study was to evaluate a sinus lift via crestal approach (SLVCA) case series, performed with rotary instruments and hydraulic pressure, analyzed under endoscopic control. Sixteen patients (11 female, 5 male, mean age 47.13±8.07 years) candidates for SLVCA were enrolled in this study. Twenty-two cylindrical two-piece implants were placed. After a suitable period of time needed for the consolidation of the graft (mean value 5.78±1.49 months), the bone augmentation was assessed by means of intraoral X-ray exams before the surgical procedure of re-entry. After a functional load with temporary acrylic fixed prosthesis, on Peek abutments, for a span of 4 months, the cases were finalized with cemented metal-ceramic prosthesis (10 single crowns, 6 bridges). The post finalization follow-up was at 12 months. During the perforation of the sinus floor via rotary instruments no perforations of the sinus membrane were observed either during the hydraulic detachment or simultaneous filling of the subantral space with the graft material. Survival rate was 94.5% since one fixture was lost, but immediately replaced with a new one. At the one-year follow-up the clinical and radiological appearance of the soft and hard tissues was optimal and no pathological signs were recorded. The SLVCA performed with rotary instruments and hydraulic pressure is a reliable grafting procedure for oral rehabilitation of maxillary edentulous sites.

Guided bone regeneration by means of a preformed titanium foil: A case of severe atrophy of edentulous posterior mandible.

The aim of this case report was to evaluate the potential of preformed titanium foil (PTF) as membrane, used together with a mouldable allograft paste, for guided bone regeneration in a case of severe mandibular posterior atrophy involving the alveolar nerve. In order to create a rigid barrier to the competitive growth of soft tissues and a stable volume for the colonization of the osteoprogenitor cells, a foil of pure titanium was pre-shaped by means of a stereolithographic model, obtained from a CT-scan of the patient. This procedure showed promising results, allowing to maximize the outcome and simplifying the surgical phase.

Modified connective tissue punch technique to increase the vestibular/buccal keratinized tissue on flapless implant surgery: a case series.

The aim of this article is to show a simple and predictable technique to enhance both the vestibular/buccal (V/B) gingival thickness (GT) and keratinized tissue width (KTW) improving the soft-tissue profile after flapless implant placement. The technique proposed was named Modified Connective Tissue Punch (MCTP). Fourteen patients (6 men and 8 women) aged between 35 and 69 years (mean value 48.07±13.023 years) were enrolled in this case series. Seventeen implant sites were submitted to flapless procedure. The connective punch (CP) was harvested with a motor-driven circular tissue punch and then a full-split dissection was executed, in order to create a deep pouch, beyond the mucogingival junction, on the V/B side. In this recipient site the CP was placed. The normal flapless surgical protocol was used; implants were inserted and covered with transgingival healing cap screws. GT and KTW were measured: both immediately before and after surgery; at the time of the prosthetic finalization (3-4months, respectively, for mandible and maxilla); 1 year post surgery follow-up. GT was measured at 1 mm, 2 mm and 5 mm on the V/B side, from the outline of the punch. Both KTW and GT at 1 and 2 mm can be effectively increased, while no significant effects for GT at 5 mm can be expected from this technique. Furthermore, the mean values of KTW and GT at 1 mm and 2 mm show significant increases at 3-4 months post-operative, while no further significant increments are shown at 1 year post-operative follow-up. The Authors recommend the use of the MCTP technique to reduce the number of aesthetic complications and soft tissue defects in flapless implant surgery. Longer follow-ups are needed to evaluate the stability of peri-implant tissues over time.

Retrospective study on bone-level and soft-tissue-level cylindrical implants.

The purpose of this prospective clinical study was to evaluate the survival rate (SVR - i.e. fixtures still in place at the end of the observation period) and success rate (SCR - i.e. bone resorption around implant neck) of two cylindrical implant systems. Both systems were equipped with a tapered connection, one requiring a bone-level (BL) placement, while the other a soft-tissue-level (STL) placement. In the period between January 1996 and October 2011, a total of 150 implants (76 in females and 74 in males, mean age 60±11 years) were inserted. The mean post-surgical follow-up was 84±47 months. Several parameters were evaluated as potential outcome conditioners: age, gender, diabetes, smoking, periodontitis, type of edentulism, replaced tooth, jaw location (i.e. maxilla or mandible), bone graft, immediate loading, post-extractive, type of prosthesis, implant diameter and length. An SPSS program was used for statistical analysis. Only two fixtures were lost, therefore SVR was 98.7%. SCR, expressed through the mean marginal bone loss, was 92%. The mean peri-implant bone loss was 0.121.47 mm for BL implants and 0.041.3 mm for STL implants. None of the studied variables had a statistical significant impact on SVR or SCR. Cylindrical implants are reliable for oral rehabilitation.

The influence of “conical plus octagonal” internal connection on implant survival and success rate: a retrospective study of 66 fixtures.

Implant oral rehabilitation has become one of the most successful dentistry techniques over the last 30 years. However, peri-implantitis is the most important complication in implant dentistry. Peri-implantits can be caused by inadequate implant-abutment connections (IAC). The aim of our study is to evaluate the influence of “conical plus octagonal” (i.e. I-Fix connection) on implant survival and success rate. All the implants included in this study were of a completely new type (I-Fix implants and abutments by FMD Falappa Medical Devices S.p.A. Rome, Italy). Sixty-six implants were inserted in males and females. The implants were of different diameters and lengths, inserted both in the mandible and in the maxilla with immediate or delayed loading, with guided bone regeneration (GBR), and post-extractive surgery. All implants were provided with I-Fix connection, 64 abutments using passing screws and 2 using full screws. None of the 66 implants were lost (i.e. survival rate - SVR = 100%). Cox-regression analysis demonstrated that diabetes (p=0.0074), GBR (p=0.0115), maxilla (p=0.0117) and smoking (p=0.0194) have a statistical significant impact on clinical outcome (i.e. greater bone resorption around implant neck). Our data show that I-Fix connection did not influence SVR. This finding demonstrates that I-Fix design seemed to significantly affect the survival rate of the implants in a recent meta-analysis. In spite of the limits of our study, I-Fix connection has been demonstrated to be efficient in closing the gap between implant and abutment and maintaining a good connection over time.

Clinical outcome of 215 transmucosal implants with a conical connection: a retrospective study after 5-year follow-up.

The purpose of this retrospective clinical study was to evaluate the survival rate (i.e. SVR – fixtures still in place at the end of the observation period) and success rate (i.e. SCR - bone resorption around implant neck) of an implant system characterized by cylindrical and tapered implants, both types of implant being equipped with a conical connection with an internal octagon (COC), both implant types having a 1.8 mm smooth neck, positioned above the bone crest level. A total of 65 subjects received 215 COCs between January 1996 and October 2011. All COCs were placed and restored by three experienced dental surgeons. The mean follow-up was 84±44 months. The patients involved in the study were both male (30) and female (35), of whom 30 were smokers (less than 20 cigarettes/day) and none was diabetic. The implants differed in terms of diameter and length, and were inserted both in the mandible (97) and in the maxilla (118). Sixty-seven implants were single tooth rehabilitations, and 148 prosthetic bridges. Fourteen had guided bone regeneration (GBR), and 10 were placed in post-extractive sites. Forty of the implants were provided with passing-screw abutments and 175 with full-screw abutments. The data were analyzed using descriptive statistics. None of the implants failed before prosthetic restoration, resulting in an SVR=100% after loading. The radiographic and clinical data revealed well-maintained, hard and soft tissue around the COCs, with an SCR=92.6%. Cox regression analyses did not detect any variables with statistical impact on the clinical outcome. In conclusion, Shiner XT implants are reliable tools for oral rehabilitation.

Guided bone regeneration in distal mandibular atrophy by means of a preformed titanium foil: a case series.

The aim of this case series was to evaluate the clinical outcome of preformed titanium foil (PTF) to perform guided bone regeneration (GBR) in posterior mandibular atrophies. Thirteen patients (4 male; 9 female; mean age 58.85±10.16 years), with class II division C atrophy, according to Misch, were selected to perform GBR by means of PTF, using a moldable allograft paste as graft material. The devices, made of a 0.2mm thick pure titanium foil, were pre-shaped using stereolithographic models obtained from CT-scan of the patients’ recipient sites. In the second stage, performed at 6.35±2.15 months, 23 cylindrical two-piece implants were placed and the devices removed. At four months, the implants were exposed and submitted to progressive prosthetic load for a span of 4 months. The cases were finalized by means of metal-ceramic cementable restorations. The post finalization follow-up was at 12 months. Survival rate (i.e. SVR) was 100% since no fixtures were lost. At the one-year follow up, the clinical appearance of the soft tissues was optimal and no pathological signs on probing were recorded. The success rate (i.e. SCR) was 82.6% and the average peri-implant bone reabsorption was 0.99±0.59 mm. The results suggest good potentialities of this method for bone volume augmentation in distal mandibular atrophies, allowing to maximize the outcome and simplifying the surgical phase.

Effects of orthodontic aligners on 24-hour masseter muscle activity: a multiple-day electromyographic study.

OBJECTIVE: This study aimed to assess the effects of aligners on masseter muscle activity by using an electromyographic device in the home environment. METHODS: The study was performed on healthy patients who required orthodontic treatment. Three different 24 h-EMG recording sessions were performed in different conditions: without aligners, with passive aligners, and with active aligners. The non-functional MMA work index (nfMMA-WI) and the non-functional MMA time index (nfMMA-TI) for both awake and sleep hours were assessed. ANOVA test was used to compare the average activity during the three recording conditions. RESULTS: On average, a total recording time of 204.7 ± 7.9 hours were provided for each patient. For most patients, ANOVA test showed an absence of significant differences between the recording sessions. CONCLUSIONS: The impact of our results is not negligible: clinicians can find remarkable support to the hypothesis that the use of aligners affects the MMA only in a minority of subjects.

Short-term dentoalveolar effects of aesthetic lip bumper appliance: A longitudinal cases-series and pilot study.

Background: To investigate the short-term dentoalveolar effects on the mandibular arch of a modified, aesthetic lip bumper (ALBAa). The study sample comprised 23 patients (13 boys and 10 girls, with a mean age of 9.5 ± 1.8 years) in mixed dentition, with no previous orthodontic treatment. For each patient, a scan of the mandibular arch was digitally acquired pre-treatment (T0), and at 3 months (T1), 6 months (T2) and 9 months (T3) post-treatment. Linear intra-arch measurements, Little's irregularity index of the amount of mandibular anterior crowding, and the crown tipping values on all mandibular teeth were measured and compared statistically between time points. ANOVA and subsequent post-hoc tests were performed, considering a p-value of < 0.05 as significant. Results: Linear intra-arch distances and crown tipping values on the mandibular teeth increased between the following time points: T0vsT1, T1vsT2, T0vsT2 and T0vsT3 (p < 0.05), although in the last three months of observation (T2vsT3) they only reached statistical significance at the lower incisors and lower left premolar concerning crown tipping values. There was a statistically significant decrease in anterior crowding throughout the observational period (p < 0.05), and this effect was equally distributed across the different time points investigated. Conclusions: ALBAa therapy led to an increase in both linear intra-arch distances and crown tipping values, with a reduction in Little's index. The distribution of the effects reported across the observational period depended on the mechanism of action (mechanical vs. functional).

Social support network characteristics and sexual risk taking among a racially/ethnically diverse sample of young, urban men who have sex with men.

Associations between social support network characteristics and sexual risk among racially/ethnically diverse young men who have sex with men (YMSM) were examined using egocentric network data from a prospective cohort study of YMSM (n = 501) recruited in New York City. Bivariate and multivariable logistic regression analyses examined associations between social support network characteristics and sexual risk taking behaviors in Black, Hispanic/Latino, and White YMSM. Bivariate analyses indicated key differences in network size, composition, communication frequency and average relationship duration by race/ethnicity. In multivariable analyses, controlling for individual level sociodemographic, psychosocial and relationship factors, having a sexual partner in one's social support network was associated with unprotected sexual behavior for both Hispanic/Latino (AOR = 3.90) and White YMSM (AOR = 4.93). Further examination of key network characteristics across racial/ethnic groups are warranted in order to better understand the extant mechanisms for provision of HIV prevention programming to racially/ethnically diverse YMSM at risk for HIV.

Cross-cultural standardization of the South Texas Assessment of Neurocognition in India.

BACKGROUND & OBJECTIVES: Despite the central role of cognition for mental disorders most studies have been conducted in western countries. Similar research from other parts of the world, particularly India, is very limited. As a first step in closing this gap this cross-cultural comparability study of the South Texas Assessment of Neurocognition (STAN) battery was conducted between USA and India. METHODS: One hundred healthy adults from Kerala, India, were administered six language independent subtests of the Java Neuropsychological Test (JANET) version of the STAN, assessing aspects of general intellectual ability (Matrix Reasoning), attention (Identical Pairs Continuous Performance, 3 Symbol Version Test; IPCPTS), working memory (Spatial Capacity Delayed Response Test; SCAP), response inhibition (Stop Signal Reaction Time; SSRT), Emotional Recognition and Risk taking (Balloon Analogue Risk Task; BART). Test results were compared to a demographically matched US sample. RESULTS: Overall test performance in the Kerala sample was comparable to that of the US sample and commensurate to that generally described in studies from western countries. INTERPRETATION & CONCLUSIONS: Our results support the metric equivalence of currently available cognitive test batteries developed in western countries for use in India. However, the sample was restricted to individuals who were literate and had completed basic primary and secondary education.