Nanomechanical Stability of Laterally Heterogeneous Films of Corrosion Inhibitor Molecules Obtained by Microcontact Printing on Au Model Substrates.

Self-assembled monolayers of corrosion inhibitors of the mercaptobenzimidazole family, SH-BimH, SH-BimH-5NH2, and SH-BimH-5OMe, were formed on template-stripped ultraflat Au surfaces using microcontact printing, and subsequently analyzed using X-ray photoelectron spectroscopy (XPS), atomic force microscopy (AFM), and AFM-force spectroscopy (AFM-FS) using a quantitative imaging (QI) mode. Printing of all used inhibitor molecules resulted in clear patterns and in slightly more compact films compared to immersion. The stability of the monolayers is further probed by AFM-FS. Adhesion values of laterally heterogeneous inhibitor-modified surfaces compared to bare Au surfaces, nonpatterned areas, and fully covered surfaces are analyzed and discussed. Microcontact printing confers a superior nanomechanical stability to imidazole-modified films of the printed surface patches as compared to homogeneously covered surfaces by immersion into the inhibitor solution.

Lipid bilayers: Phase behavior and nanomechanics.

Lipid membranes are involved in many physiological processes like recognition, signaling, fusion or remodeling of the cell membrane or some of its internal compartments. Within the cell, they are the ultimate barrier, while maintaining the fluidity or flexibility required for a myriad of processes, including membrane protein assembly. The physical properties of in vitro model membranes as model cell membranes have been extensively studied with a variety of techniques, from classical thermodynamics to advanced modern microscopies. Here we review the nanomechanics of solid-supported lipid membranes with a focus in their phase behavior. Relevant information obtained by quartz crystal microbalance with dissipation monitoring (QCM-D) and atomic force microscopy (AFM) as complementary techniques in the nano/mesoscale interface is presented. Membrane morphological and mechanical characterization will be discussed in the framework of its phase behavior, phase transitions and coexistence, in simple and complex models, and upon the presence of cholesterol.

Liquid-liquid criticality in the dielectric constant and refractive index: A perspective.

The critical region in the phase diagram of condensed matter systems such as fluids or fluid mixtures is characterized by the anomalous behaviour of specific thermodynamic properties. Here, we discuss the progress of understanding the behaviour of two intimately related properties, the dielectric constant [Formula: see text] and the refractive index n, when approaching the liquid-liquid critical point in binary liquid mixtures. Phenomenological scaling approaches, in particular, complete scaling formulation, are highlighted. In addition, experimental evidence provided by dielectric spectroscopy and optical measurements supporting the asymmetry-related critical features in [Formula: see text] and n in the one- and two-phase regions is assessed. We revisit recent experimental data and point out peculiar patterns of behaviour of polar-polar liquid mixtures as compared to (much more frequently studied) polar-non-polar mixtures. We point the necessity of additional research efforts towards the study of polar-polar mixtures, which would shed light into the influence of (microscopic) system-dependent parameters on asymmetry-related features of liquid-liquid criticality.

Array formatting of the heat-transfer method (HTM) for the detection of small organic molecules by molecularly imprinted polymers.

In this work we present the first steps towards a molecularly imprinted polymer (MIP)-based biomimetic sensor array for the detection of small organic molecules via the heat-transfer method (HTM). HTM relies on the change in thermal resistance upon binding of the target molecule to the MIP-type receptor. A flow-through sensor cell was developed, which is segmented into four quadrants with a volume of 2.5 µL each, allowing four measurements to be done simultaneously on a single substrate. Verification measurements were conducted, in which all quadrants received a uniform treatment and all four channels exhibited a similar response. Subsequently, measurements were performed in quadrants, which were functionalized with different MIP particles. Each of these quadrants was exposed to the same buffer solution, spiked with different molecules, according to the MIP under analysis. With the flow cell design we could discriminate between similar small organic molecules and observed no significant cross-selectivity. Therefore, the MIP array sensor platform with HTM as a readout technique, has the potential to become a low-cost analysis tool for bioanalytical applications.

Spontaneous nanotube formation of an asymmetric glycolipid.

Over the past decades, advances in lipid nanotechnology have shown that self-assembled lipid structures providing ease of preparation, chemical stability, and biocompatibility represent a landmark on the development of multidisciplinary technologies. Lipid nanotubes (LNTs) are a unique class of lipid self-assembled structures, bearing unique properties such as high-aspect ratio, tunable diameter size, and precise molecular recognition. They can be obtained either by the action of external factors to already formed vesicles or spontaneously, the latter depending strongly on subtle molecular features. Here, we report on the spontaneous formation of supported lipid nanotubes of a particular type of glycolipid, ohmline, whose hydrophobic core displays remarkable asymmetry. The combination of bulk and surface-sensitive techniques indicates that below its main transition, ohmline displays an interdigitated gel phase, likely driven by the unique asymmetry in its hydrophobic core. Enhanced order packing by interdigitation favors the formation of ohmline nanotubes in agreement with chiral-based models of nanotube formation. The findings presented in this work call for additional studies to link lipid molecular structure-assembly relationships, whose understanding is relevant for the controlled design of lipid nanotubes networks in particular and controlled design of soft-matter nanomaterials in general.

Kinetic control of liposome size by direct lipid transfer.

Spontaneous lipid vesiculation and related size distribution are traditionally studied in the framework of equilibrium thermodynamics and continuum mechanics, overlooking the kinetic aspects of the process. In the scenario of liposomes consisting of different lipid molecules dispersed in the same medium - a non-equilibrium situation -, the system evolves driven by lipid monomer transfer among the different liposomes. This process encompasses time-dependent changes in liposome size and size distribution, thus predicting size and composition at a given time would entail the control of the size of liposomes by kinetic means, an asset in the framework of diagnostics and synthetic biology. We introduce a direct transfer model, based on the fact that monomers are highly reactive species and apply it to saturated phospholipid molecules differing in hydrophobic chain length. Considering a well-defined gamma-type liposome size distribution, we demonstrate a clear liposome size-composition correlation and are able to predict liposome size and size distribution at any time in the transfer process. The size-composition correlation opens up new prospects for the control of the self-assembling properties of lipids and thereby the control of the liposome size.

Bioanalytical sensors using the heat-transfer method HTM and related techniques.

This review provides an overview on bio- and chemosensors based on a thermal transducer platform that monitors the thermal interface resistance R th between a solid chip and the supernatant liquid. The R th parameter responds in a surprisingly strong way to molecular-scale changes at the solid-liquid interface, which can be measured thermometrically, using for instance thermocouples in combination with a controllable heat source. In 2012, the effect was first observed during on-chip denaturation experiments on complementary and mismatched DNA duplexes that differ in their melting temperature. Since then, the concept is addressed as heat-transfer method, in short HTM, and numerous applications of the basic sensing principle were identified. Functionalizing the chip with bioreceptors such as molecularly imprinted polymers makes it possible to detect neurotransmitters, inflammation markers, viruses, and environmental pollutants. In combination with aptamer-type receptors, it is also possible to detect proteins at low concentrations. Changing the receptors to surface-imprinted polymers has opened up new possibilities for quantitative bacterial detection and identification in complex matrices. In receptor-free variants, HTM was successfully used to characterize lipid vesicles and eukaryotic cells (yeast strains, cancer cell lines), the latter showing spontaneous detachment under influence of the temperature gradient inherent to HTM. We will also address modifications to the original HTM technique such as M-HTM, inverted HTM, thermal wave transport analysis TWTA, and the hot-wire principle. The article concludes with an assessment of the possibilities and current limitations of the method, together with a technological forecast.

The critical behavior of the refractive index near liquid-liquid critical points.

The nature of the critical behavior in the refractive index n is revisited in the framework of the complete scaling formulation. A comparison is made with the critical behavior of n as derived from the Lorentz-Lorenz equation. Analogue anomalies to those predicted for the dielectric constant ε, namely, a leading |t|(2ß) singularity in the coexistence-curve diameter in the two-phase region and a |t|(1-α) along the critical isopleth in the one phase region, are expected in both cases. However, significant differences as regards the amplitudes of both singularities are obtained from the two approaches. Analysis of some literature data along coexistence in the two-phase region and along the critical isopleth in the one-phase region provide evidence of an intrinsic effect, independent of the density, in the critical anomalies of n. This effect is governed by the shift of the critical temperature with an electric field, which is supposed to take smaller values at optical frequencies than at low frequencies in the Hz to MHz range.

Molecularly Imprinted Polymer Nanoparticles Enable Rapid, Reliable, and Robust Point-of-Care Thermal Detection of SARS-CoV-2.

Rapid antigen tests are currently used for population screening of COVID-19. However, they lack sensitivity and utilize antibodies as receptors, which can only function in narrow temperature and pH ranges. Consequently, molecularly imprinted polymer nanoparticles (nanoMIPs) are synthetized with a fast (2 h) and scalable process using merely a tiny SARS-CoV-2 fragment (∼10 amino acids). The nanoMIPs rival the affinity of SARS-CoV-2 antibodies under standard testing conditions and surpass them at elevated temperatures or in acidic media. Therefore, nanoMIP sensors possess clear advantages over antibody-based assays as they can function in various challenging media. A thermal assay is developed with nanoMIPs electrografted onto screen-printed electrodes to accurately quantify SARS-CoV-2 antigens. Heat transfer-based measurements demonstrate superior detection limits compared to commercial rapid antigen tests and most antigen tests from the literature for both the alpha (∼9.9 fg mL-1) and delta (∼6.1 fg mL-1) variants of the spike protein. A prototype assay is developed, which can rapidly (∼15 min) validate clinical patient samples with excellent sensitivity and specificity. The straightforward epitope imprinting method and high robustness of nanoMIPs produce a SARS-CoV-2 sensor with significant commercial potential for population screening, in addition to the possibility of measurements in diagnostically challenging environments.

Synchronized, Spontaneous, and Oscillatory Detachment of Eukaryotic Cells: A New Tool for Cell Characterization and Identification.

Despite the importance of cell characterization and identification for diagnostic and therapeutic applications, developing fast and label-free methods without (bio)-chemical markers or surface-engineered receptors remains challenging. Here, we exploit the natural cellular response to mild thermal stimuli and propose a label- and receptor-free method for fast and facile cell characterization. Cell suspensions in a dedicated sensor are exposed to a temperature gradient, which stimulates synchronized and spontaneous cell-detachment with sharply defined time-patterns, a phenomenon unknown from literature. These patterns depend on metabolic activity (controlled through temperature, nutrients, and drugs) and provide a library of cell-type-specific indicators, allowing to distinguish several yeast strains as well as cancer cells. Under specific conditions, synchronized glycolytic-type oscillations are observed during detachment of mammalian and yeast-cell ensembles, providing additional cell-specific signatures. These findings suggest potential applications for cell viability analysis and for assessing the collective response of cancer cells to drugs.

The critical behavior of the dielectric constant in the polar + polar binary liquid mixture nitromethane + 3-pentanol: an unusual sign of its critical amplitude in the one-phase region.

Dielectric constant measurements have been carried out in the one- and two-phase regions near the critical point of the polar + polar binary liquid mixture nitromethane + 3-pentanol. In the two-phase region, evidence for the |t|(2ß) singularity in the coexistence-curve diameter has been detected, thus confirming the novel predictions of complete scaling theory for liquid-liquid criticality. In the one-phase region, an "unusual" negative sign for the amplitude of the |t|(1-α) singularity has been encountered for the first time in an upper critical solution temperature type of binary liquid mixture at atmospheric pressure. Mass density measurements have also been carried out to provide additional information related to such experimental finding, which entails an increase of the critical temperature T(c) under an electric field.

Large heat capacity anomaly near the consolute point of the binary mixture nitromethane and 3-pentanol.

The large critical anomaly in the isobaric heat capacity C(p,x)(T) of the binary mixture nitromethane + 3-pentanol is measured using high-resolution adiabatic scanning calorimetry. The unique features of this technique provided an alternative approach to the study of the critical behavior of C(p,x)(T), providing further C(p,x)(T) related quantities from which valuable information could be extracted. Our data are in full agreement with the predictions of the Modern Theory of Critical Phenomena; specifically, 3D-Ising model values for the critical exponent α and the universal amplitude ratio values of the leading critical amplitudes, as well as for the first correction-to-scaling ones, provide the optimum fits to represent the experimental data. Evidence for the need of higher-order terms, i.e., first correction-to-scaling term, is given. The large value of the coefficient E for the linear temperature dependence of the background obtained is ascribed to a possible contribution of the regular linear background term, of a higher-order asymmetry term, and of the second correction-to-scaling term. Internal consistency of C(p,x)(T) and its related quantities is successfully checked.

Asymmetric Lipid Transfer between Zwitterionic Vesicles by Nanoviscosity Measurements.

The interest in nano-sized lipid vesicles in nano-biotechnology relies on their use as mimics for endosomes, exosomes, and nanocarriers for drug delivery. The interactions between nanoscale size lipid vesicles and cell membranes involve spontaneous interbilayer lipid transfer by several mechanisms, such as monomer transfer or hemifusion. Experimental approaches toward monitoring lipid transfer between nanoscale-sized vesicles typically consist of transfer assays by fluorescence microscopy requiring the use of labels or calorimetric measurements, which in turn require a large amount of sample. Here, the capability of a label-free surface-sensitive method, quartz crystal microbalance with dissipation monitoring (QCM-D), was used to monitor lipid transfer kinetics at minimal concentrations and to elucidate how lipid physicochemical properties influence the nature of the transfer mechanism and dictate its dynamics. By studying time-dependent phase transitions obtained from nanoviscosity measurements, the transfer rates (unidirectional or bidirectional) between two vesicle populations consisting of lipids with the same head group and differing alkyl chain length can be estimated. Lipid transfer is asymmetric and unidirectional from shorter-chain lipid donor vesicles to longer-chain lipid acceptor vesicles. The transfer is dramatically reduced when the vesicle populations are incubated at temperatures below the melting of one of the vesicle populations.

1D-Confinement Inhibits the Anomaly in Secondary Relaxation of a Fluorinated Polymer.

We present an experimental study of the dynamics of a well-pronounced secondary relaxation observed in bulk and ultrathin films of the fluorinated copolymer poly(vinylidene fluoride-co-hexafluoropropylene) (PVdF-HFP). In proximity to the glass transition, an anomalous phenomenon is observed: the ß-relaxation slows down upon heating. Measurements as a function of the film thickness show that this exceptional behavior gradually vanishes upon confinement at the nanoscale level. Regardless of sample size, the relaxation dynamics could be described in terms of the Minimal Model via an asymmetric double well potential. Supported by a structural investigation of surfaces and interfaces, our results reveal that the presence of adsorbing walls induces an increase in glass transition temperature, which counterbalances the asymmetry in the double well potential responsible for molecular motion.

Ionic strength controls long-term cell-surface interactions - A QCM-D study of S. cerevisiae adhesion, retention and detachment.

Understanding microbial adhesion and retention is crucial for controlling many processes, including biofilm formation, antimicrobial therapy as well as cell sorting and cell detection platforms. Cell detachment is inextricably linked to cell adhesion and retention and plays an important part in the mechanisms involved in these processes. Physico-chemical and biological forces play a crucial role in microbial adhesion interactions and altering the medium ionic strength offers a potential means for modulating these interactions. Real-time studies on the effect of ionic strength on microbial adhesion are often limited to short-term bacterial adhesion. Therefore, there is a need, not only for long-term bacterial adhesion studies, but also for similar studies focusing on eukaryotic microbes, such as yeast. Hereby, we monitored, in real-time, S. cerevisiae adhesion on gold and silica as examples of surfaces with different surface charge properties to disclose long-term adhesion, retention and detachment as a function of ionic strength using quartz crystal microbalance with dissipation monitoring. Our results show that short- and long-term cell adhesion levels in terms of mass-loading increase with increasing ionic strength, while cells dispersed in a medium of higher ionic strength experience longer retention and detachment times. The positive correlation between the cell zeta potential and ionic strength suggests that zeta potential plays a role on cell retention and detachment. These trends are similar for measurements on silica and gold, with shorter retention and detachment times for silica due to strong short-range repulsions originating from a high electron-donicity. Furthermore, the results are comparable with measurements in standard yeast culture medium, implying that the overall effect of ionic strength applies for cells in nutrient-rich and nutrient-deficient media.

Immobilization of Molecularly Imprinted Polymer Nanoparticles onto Surfaces Using Different Strategies: Evaluating the Influence of the Functionalized Interface on the Performance of a Thermal Assay for the Detection of the Cardiac Biomarker Troponin I.

We demonstrate that a novel functionalized interface, where molecularly imprinted polymer nanoparticles (nanoMIPs) are attached to screen-printed graphite electrodes (SPEs), can be utilized for the thermal detection of the cardiac biomarker troponin I (cTnI). The ultrasensitive detection of the unique protein cTnI can be utilized for the early diagnosis of myocardial infraction (i.e., heart attacks), resulting in considerably lower patient mortality and morbidity. Our developed platform presents an innovative route to develop accurate, low-cost, and disposable sensors for the diagnosis of cardiovascular diseases, specifically myocardial infraction. A reproducible and advantageous solid-phase approach was utilized to synthesize high-affinity nanoMIPs (average size = 71 nm) for cTnI, which served as synthetic receptors in a thermal sensing platform. To assess the performance and commercial potential of the sensor platform, various approaches were used to immobilize nanoMIPs onto thermocouples or SPEs: dip coating, drop casting, and a covalent approach relying on electrografting with an organic coupling reaction. Characterization of the nanoMIP-functionalized surfaces was performed with electrochemical impedance spectroscopy, atomic force microscopy, and scanning electron microscopy. Measurements from an in-house designed thermal setup revealed that covalent functionalization of nanoMIPs onto SPEs led to the most reproducible sensing capabilities. The proof of application was provided by measuring buffered solutions spiked with cTnI, which demonstrated that through monitoring changes in heat transfer at the solid-liquid interface, we can measure concentrations as low as 10 pg L-1, resulting in the most sensitive test of this type. Furthermore, preliminary data are presented for a prototype platform, which can detect cTnI with shorter measurement times and smaller sample volumes. The excellent sensor performance, versatility of the nanoMIPs, and reproducible and low-cost nature of the SPEs demonstrate that this sensor platform technology has a clear commercial route with high potential to contribute to sustainable healthcare.

Critical behavior of static properties for nitrobenzene-alkane mixtures.

We present experimental data of the isobaric heat capacity per unit volume C(p,x)V(-1) for mixtures containing nitrobenzene and an alkane (C(N)H(2N+2), with N ranging from 6 to 15) upon approaching their liquid-liquid critical points along a path of constant composition. Values for the critical amplitude A(+) have been determined. They have been combined with the previously reported ones for the leading term of the coexistence-curve width to obtain, with the aid of well-known universal relations, the critical amplitudes of the correlation length and of the osmotic susceptibility. The trends of all these critical parameters, which exhibit anomalous behavior in the low N region, are discussed in terms of particular microscopic phenomena characterizing NB-C(N)H(2N+2) mixtures. The work is completed with an analysis of the analog of the Yang-Yang anomaly in liquid-liquid criticality: the behavior of the partial molar heat capacities of the two liquid components is found to illustrate previously uncovered asymmetry effects.

Heat capacity anomalies along the critical isotherm in fluid-fluid phase transitions.

The behavior of the isochoric heat capacity of pure fluids and the isobaric heat capacity at constant composition of binary mixtures along isothermal paths of approach to liquid-gas and liquid-liquid critical points is studied. From the complete scaling formulation of fluid-fluid criticality, explicit expressions for the critical amplitudes of the leading /Y-Y(c)/(-alpha/beta) (where Y can be the density or the mole fraction) contributions are found to reveal previously discovered features of the scaling function, whereas the nature of the most important asymmetry-related terms is characterized. Data for pure toluene and for the binary mixture nitromethane-isobutanol are described within experimental uncertainty using the /Y-Y(c)/(-alpha/beta) singularity plus a linear term. Extensive data for mixtures allow proper visualization of the topological features of the heat capacity-density-temperature surface in the critical region.

Temperature, concentration, and frequency dependence of the dielectric constant near the critical point of the binary liquid mixture nitrobenzene-tetradecane.

Detailed results are reported for the dielectric constant epsilon as a function of temperature, concentration, and frequency near the upper critical point of the binary liquid mixture nitrobenzene-tetradecane. The data have been analyzed in the context of the recently developed concept of complete scaling. It is shown that the amplitude of the low frequency critical Maxwell-Wagner relaxation (with a relaxation frequency around 10 kHz) along the critical isopleth is consistent with the predictions of a droplet model for the critical fluctuations. The temperature dependence of epsilon in the homogeneous phase can be well described with a combination of a (1-alpha) power law term (with alpha the heat capacity critical exponent) and a linear term in reduced temperature with the Ising value for alpha. For the proper description of the temperature dependence of the difference Deltaepsilon between the two coexisting phases below the critical temperature, it turned out that good fits with the Ising value for the order parameter exponent beta required the addition of a corrections-to-scaling contribution or a linear term in reduced temperature. Good fits to the dielectric diameter epsilon(d) require a (1-alpha) power law term, a 2beta power law term (in the past considered as spurious), and a linear term in reduced temperature, consistent with complete scaling.

QCM-D Study of Time-Resolved Cell Adhesion and Detachment: Effect of Surface Free Energy on Eukaryotes and Prokaryotes.

Cell-material interactions are crucial for many biomedical applications, including medical implants, tissue engineering, and biosensors. For implants, while the adhesion of eukaryotic host cells is desirable, bacterial adhesion often leads to infections. Surface free energy (SFE) is an important parameter that controls short- and long-term eukaryotic and prokaryotic cell adhesion. Understanding its effect at a fundamental level is essential for designing materials that minimize bacterial adhesion. Most cell adhesion studies for implants have focused on correlating surface wettability with mammalian cell adhesion and are restricted to short-term time scales. In this work, we used quartz crystal microbalance with dissipation monitoring (QCM-D) and electrical impedance analysis to characterize the adhesion and detachment of S. cerevisiae and E. coli, serving as model eukaryotic and prokaryotic cells within extended time scales. Measurements were performed on surfaces displaying different surface energies (Au, SiO2, and silanized SiO2). Our results demonstrate that tuning the surface free energy of materials is a useful strategy for selectively promoting eukaryotic cell adhesion and preventing bacterial adhesion. Specifically, we show that under flow and steady-state conditions and within time scales up to ∼10 h, a high SFE, especially its polar component, enhances S. cerevisiae adhesion and hinders E. coli adhesion. In the long term, however, both cells tend to detach, but less detachment occurs on surfaces with a high dispersive SFE contribution. The conclusions on S. cerevisiae are also valid for a second eukaryotic cell type, being the human embryonic kidney (HEK) cells on which we performed the same analysis for comparison. Furthermore, each cell adhesion phase is associated with unique cytoskeletal viscoelastic states, which are cell-type-specific and surface free energy-dependent and provide insights into the underlying adhesion mechanisms.