Magnetic Field Enhanced Cobalt Iridium Alloy Catalyst for Acidic Oxygen Evolution Reaction.

Magnetic field mediated magnetic catalysts provide a powerful pathway for accelerating their sluggish kinetics toward the oxygen evolution reaction (OER) but remain great challenges in acidic media. The key obstacle comes from the production of an ordered magnetic domain catalyst in the harsh acidic OER. In this work, we form an induced local magnetic moment in the metallic Ir catalyst via the significant 3d-5d hybridization by introducing cobalt dopants. Interestingly, CoIr nanoclusters (NCs) exhibit an excellent magnetic field enhanced acidic OER activity, with the lowest overpotential of 220 mV at 10 mA cm-2 and s long-term stability of 120 h under a constant magnetic field (vs 260 mV/20 h without a magnetic field). The turnover frequency reaches 7.4 s-1 at 1.5 V (vs RHE), which is 3.0 times higher than that without magnetization. Density functional theory results show that CoIr NCs have a pronounced spin polarization intensity, which is preferable for OER enhancement.

Extending Ring-Chain Coupling Empirical Law to Lithium-Mediated Electrochemical Ammonia Synthesis.

With its efficient nitrogen fixation kinetics, electrochemical lithium-mediated nitrogen reduction reaction (LMNRR) holds promise for replacing Haber-Bosch process and realizing sustainable and green ammonia production. However, the general interface problem in lithium electrochemistry seriously impedes the further enhancement of LMNRR performance. Inspired by the development history of lithium battery electrolytes, here, we extend the ring-chain solvents coupling law to LMNRR system to rationally optimize the interface during the reaction process, achieving nearly a two-fold Faradaic efficiency up to 54.78±1.60 %. Systematic theoretical simulations and experimental analysis jointly decipher that the anion-rich Li+ solvation structure derived from ring tetrahydrofuran coupling with chain ether successfully suppresses the excessive passivation of electrolyte decomposition at the reaction interface, thus promoting the mass transfer of active species and enhancing the nitrogen fixation kinetics. This work offers a progressive insight into the electrolyte design of LMNRR system.

Optimizing Intermediate Adsorption over PdM (M=Fe, Co, Ni, Cu) Bimetallene for Boosted Nitrate Electroreduction to Ammonia.

Electrochemical reduction of nitrate to ammonia (NO3RR) is a promising and eco-friendly strategy for ammonia production. However, the sluggish kinetics of the eight-electron transfer process and poor mechanistic understanding strongly impedes its application. To unveil the internal laws, herein, a library of Pd-based bimetallene with various transition metal dopants (PdM (M=Fe, Co, Ni, Cu)) are screened to learn their structure-activity relationship towards NO3RR. The ultra-thin structure of metallene greatly facilitates the exposure of active sites, and the transition metals dopants break the electronic balance and upshift its d-band center, thus optimizing intermediates adsorption. The anisotropic electronic characteristics of these transition metals make the NO3RR activity in the order of PdCu>PdCo≈PdFe>PdNi>Pd, and a record-high NH3 yield rate of 295 mg h-1 mgcat -1 along with Faradaic efficiency of 90.9 % is achieved in neutral electrolyte on PdCu bimetallene. Detailed studies further reveal that the moderate N-species (*NO3 and *NO2) adsorption ability, enhanced *NO activation, and reduced HER activity facilitate the NH3 production. We believe our results will give a systematic guidance to the future design of NO3RR catalysts.

High-Performance Piezoelectric Two-Dimensional Covalent Organic Frameworks.

Organic piezoelectric nanogenerators (PENGs) are attractive in harvesting mechanical energy for various self-powering systems. However, their practical applications are severely restricted by their low output open circuit voltage. To address this issue, herein, we prepared two two-dimensional (2D) covalent organic frameworks (COFs, CityU-13 and CityU-14), functionalized with fluorinated alkyl chains for PENGs. The piezoelectricity of both COFs was evidenced by switchable polarization, characteristic butterfly amplitude loops, phase hysteresis loops, conspicuous surface potentials and high piezoelectric coefficient value (d33). The PENGs fabricated with COFs displayed highest output open circuit voltages (60 V for CityU-13 and 50 V for CityU-14) and delivered satisfactory short circuit current with an excellent stability of over 600 seconds. The superior open circuit voltages of CityU-13 and CityU-14 rank in top 1 and 2 among all reported organic materials-based PENGs.

Doped Graphene To Mimic the Bacterial NADH Oxidase for One-Step NAD+ Supplementation in Mammals.

Nicotinamide adenine dinucleotide (NAD) is a critical regulator of metabolic networks, and declining levels of its oxidized form, NAD+, are closely associated with numerous diseases. While supplementing cells with precursors needed for NAD+ synthesis has shown poor efficacy in combatting NAD+ decline, an alternative strategy is the development of synthetic materials that catalyze the oxidation of NADH into NAD+, thereby taking over the natural role of the NADH oxidase (NOX) present in bacteria. Herein, we discovered that metal-nitrogen-doped graphene (MNGR) materials can catalyze the oxidation of NADH into NAD+. Among MNGR materials with different transition metals, Fe-, Co-, and Cu-NGR displayed strong catalytic activity combined with >80% conversion of NADH into NAD+, similar specificity to NOX for abstracting hydrogen from the pyridine ring of nicotinamide, and higher selectivity than 51 other nanomaterials. The NOX-like activity of FeNGR functioned well in diverse cell lines. As a proof of concept of the in vivo application, we showed that FeNGR could specifically target the liver and remedy the metabolic flux anomaly in obesity mice with NAD+-deficient cells. Overall, our study provides a distinct insight for exploration of drug candidates by design of synthetic materials to mimic the functions of unique enzymes (e.g., NOX) in bacteria.

Synergistic Effect of Fe Single-Atom Catalyst for Highly Efficient Microwave-Stimulated Remediation of Chloramphenicol-Contaminated Soil.

Chloramphenicol (CAP) has long been used extensively in agriculture and is severely toxic to the biological environment. Microwave catalysis appears a promising method for soil remediation due to its fast and effective heat transfer, but it is challenging to prepare catalysts with good electromagnetic wave absorption and robust catalytic activity. In this study, atomically dispersed Fe on three-dimensional N-doped carbon supports (3D Fe-NC) is firstly used for microwave remediation of soil. Thanks to the synergistic effect of microwave "hot spots" and reactive oxygen species (•OH, •O2 - ), 3D Fe-NC can completely remove 99.9% of CAP in 5 min. The removal rate constant is nearly twice that of commercial activated carbon. Significantly, the germination rate of lettuce seeds in microwave-repaired soil contaminated by CAP reaches 70%. This work demonstrates the application of Fe single-atom catalyst in microwave remediation of contaminated soil, providing a novel insight for agricultural soil remediation.

Divalent Oxidation State Ni as an Active Intermediate in Prussian Blue Analogues for Electrocatalytic Urea Oxidation.

Urea degradation is one of the most crucial links in the natural nitrogen cycle. Exploring the real active species in the urea electro-oxidation process is of great significance for understanding the urea electro-oxidation mechanism and designing catalysts. A highly active and stable Prussian blue analogue catalyst (PBA@NiFe/NF) loaded on nickel foam was synthesized for electro-oxidation of urea. In situ Raman spectra revealed that Ni in PBA@NiFe/NF was able to maintain a stable divalent nickel (Ni(II)) state for up to 3.5 h during the initial urea oxidation process, which is rarely reported in previous research studies. In addition, with the participation of iron, the Ni-Fe bimetallic center significantly improves the electro-oxidation of urea. Our work provides a new idea for prolonging the Ni(II) activity in electrocatalytic oxidation of urea.

Natural Geranylated Sulfur-Containing Amides with Inhibitory Effect on Th17 Differentiation.

Chemical investigation of medicinal plant Glycosmis lucida Wall. ex C. C. Huang leaves led to the production of ten compounds (1-10), including two previously unreported geranylated sulfur-containing amides (1 and 2) and eight known ones (3-10). Structural characterization was carried out using comprehensive spectroscopic methods including NMR, MS and CD. The inhibitory effects of all isolates on Th17 differentiation were evaluated, of which compounds 1 and 6 significantly inhibited Th17 differentiation with IC50 values of 0.36 and 1.30 µM, respectively, while both 1 and 6 failed to bind to retinoic acid-related orphan receptor gamma t (RORγt), suggesting that their inhibition of Th17 differentiation is independent of RORγt.

Comparative Study of the Structural Characteristics and Bioactivity of Polysaccharides Extracted from Aspidopterys obcordata Hemsl. Using Different Solvents.

The polysaccharides extracted from Aspidopterys obcordata are thought to have anti-urolithiasis activity in Drosophila kidney stones. This study aimed to assess the effects of different extraction solvents on the yield, chemical composition, and bioactivity of polysaccharides from A. obcordata. A. obcordata polysaccharides were extracted by using four solutions: hot water, HCl solution, NaOH solution, and 0.1 M NaCl. The results revealed that the extraction solvents significantly influenced the extraction yields, molecular weight distribution, monosaccharide compositions, preliminary structural characteristics, and microstructures of polysaccharides. The NaOH solution's extraction yield was significantly higher than the other extraction methods. Vitro antioxidant activity assays revealed that the NaOH solution extracted exhibited superior scavenging abilities towards DPPH and ABTS radicals and higher FRAP values than other polysaccharides. The vitro assays conducted for calcium oxalate crystallization demonstrated that four polysaccharides exhibited inhibitory effects on the nucleation and aggregation of calcium oxalate crystals, impeded calcium oxalate monohydrate growth, and induced calcium oxalate dihydrate formation. The NaOH solution extracted exhibited the most pronounced inhibition of calcium oxalate crystal nucleation, while the hot water extracted demonstrated the most significant suppression of calcium oxalate crystal aggregation. Therefore, it can be inferred that polysaccharides extracted with NaOH solution exhibited significant potential as a viable approach for extracting polysaccharides from stems due to their superior yield and the remarkable bioactivity of the resulting products.

Vibration-driven Reduction of CO2 to Acetate with 100 % Selectivity by SnS Nanobelt Piezocatalysts.

Converting CO2 into high-value C2 chemicals such as acetate with high selectivity and efficiency is a critical issue in renewable energy storage. Herein, for the first time we present a vibration-driven piezocatalysis with tin(II) monosulfide (SnS) nanobelts for conversion of CO2 to acetate with 100 % selectivity, and the highest production rate (2.21 mM h-1 ) compared with reported catalysts. Mechanism analysis reveal that the polarized charges triggered by periodic mechanical vibration promote the adsorption and activation of CO2 . The electron transfer can be facilitated due to built-in electric field, decreased band gap and work function of SnS under stress. Remarkably, reduced distance between active sites leads to charge enrichment on Sn sites, promoting the C-C coupling, reducing the energy barriers of the rate determining step. It puts forward a bran-new strategy for converting CO2 into high-value C2 products with efficient, low-cost and environment-friendly piezocatalysis utilizing mechanical energy.

Eliminating Concentration Polarization with Cationic Covalent Organic Polymer to Promote Effective Overpotential of Nitrogen Fixation.

Electrocatalytic nitrogen reduction reaction offers a sustainable alternative to the conventional Haber-Bosch process. However, it is currently restricted by low effective overpotential due to the concentration polarization, which arises from accumulated products, ammonium, at the reaction interface. Here, a novel covalent organic polymer with ordered periodic cationic sites is proposed to tackle this challenge. The whole network exhibits strong positive charge and effectively repels the positively charged ammonium, enabling an ultra-low interfacial product concentration, and successfully driving the reaction equilibrium to the forward direction. With the given potential unchanged, the suppressed overpotential can be much liberated, ultimately leading to a continuous high-level reaction rate. As expected, when this tailored microenvironment is coupled with a transition metal-based catalyst, a 24-fold improvement is generated in the Faradaic efficiency (73.74 %) as compared with the bare one. The proposed strategy underscores the importance of optimizing dynamic processes as a means of improving overall performance in electrochemical syntheses.

Antibacterial Nanomaterials: Mechanisms, Impacts on Antimicrobial Resistance and Design Principles.

Antimicrobial resistance (AMR) is one of the biggest threats to the environment and health. AMR rapidly invalidates conventional antibiotics, and antimicrobial nanomaterials have been increasingly explored as alternatives. Interestingly, several antimicrobial nanomaterials show AMR-independent antimicrobial effects without detectable new resistance and have therefore been suggested to prevent AMR evolution. In contrast, some are found to trigger the evolution of AMR. Given these seemingly conflicting findings, a timely discussion of the two faces of antimicrobial nanomaterials is urgently needed. This review systematically compares the killing mechanisms and structure-activity relationships of antibiotics and antimicrobial nanomaterials. We then focus on nano-microbe interactions to elucidate the impacts of molecular initiating events on AMR evolution. Finally, we provide an outlook on future antimicrobial nanomaterials and propose design principles for the prevention of AMR evolution.

Ion-in-Conjugation: A Promising Concept for Multifunctional Organic Semiconductors.

Most organic semiconductors (OSCs) consist of conjugated skeletons with flexible peripheral chains. Their weak intermolecular interactions from dispersion and induction forces result in environmental susceptibilities and are unsuitable for many multifunctional applications where direct exposure to external environments is unavoidable, such as gas absorption, chemical sensing, and catalysis. To exploit the advantages of inorganic semiconductors in OSCs, ion-in-conjugation (IIC) materials are proposed. An IIC material refers to any conjugated material (molecules, polymers, and crystals) in Kekule's structural formula containing stoichiometric ionic states in its conjugated backbone in the electronic ground state. In this review, the definitions, structures, synthesis, properties, and applications of IIC materials are described briefly. Four types of IIC material, including zwitterionic conjugated molecules/polymers, conjugated ionic dyes, π-d conjugated molecules and polymers, and coordinatively doped polymers, are reported. Their applications in gas sensing, humidity sensing, resistive memory devices, and thermal/photo-/electro-catalysis are demonstrated. The challenges and opportunities for future research are also discussed. It is expected that this work will inspire the design of new organic electronic information materials.

NiCo Alloy Nanoparticles on a N/C Dual-Doped Matrix as a Cathode Catalyst for Improved Microbial Fuel Cell Performance.

The cathode material properties of the microbial fuel cell (MFC) have a quite important effect on their power generation capacity. Excellent oxygen reduction reaction (ORR) performance is the key to obtaining the remarkable capability of MFC. In this study, a series of catalysts are successfully prepared by a simple step-by-step hydrothermal, in situ growth, solution polymerization, and pyrolysis procedure. Here, the NiCo nanoparticles loading on nitrogen/carbon dual-doped matrix annealing at 800 °C (NiCo@DNC-800) under Ar shows good ORR activity with a maximum power density of 2325.60 ± 41.96 mW m-2 in the case of the 2 mg cm-2 minimal catalyst loading, and which is about 2.16 times more than that achieved by 20% Pt/C (1074.21 ± 39.36 mW m-2 ). The unique N/C duel-doped matrix provides more graphitic-N and pyridinic-N that can reduce the resistance of electron diffusion and transport, together with the synergistic catalysis of NiCo active sites improving the oxygen reduction reaction performance of MFC greatly. In addition, the NiCo@DNC-800 cathode catalyst demonstrates that composite materials have great application potential in water pollution treatment and new green energy strategies.

Nanomicelles Array for Ultrahigh-Density Data Storage.

High-density data storage devices based on organic and polymer materials are currently restricted by two key issues, size limitations and uniformity of memory cells. Herein, one triblock polymer is synthesized by ring-opening metathesis polymerization, where the polymer contains an electron-donor-acceptor (A1 D) segment, an electron-acceptor (A2 ) segment, and a hydrophilic segment, that shows ternary memory behavior in a conventional sandwich-type device. The polymers that have monodisperse molecular weight dispersity self-assemble into nanomicelles with a uniform size of 80 nm. Each nanomicelle is composed of an A1 DA2 -type hydrophobic core stabilized with a hydrophilic shell. Nanobowls based on conductive oxide are prepared via the template method, wherein the nanomicelles are present as independent nanoscale memory units to produce an array of micelle matrices. Investigations of the resulting nanomemory device using conductive atomic force microscopy show that the micelles exhibit a predominant semiconductor memory behavior. Compared to traditional ternary devices with a memory unit size of ≈1 mm, this innovative fabrication method based on arrayed uniform nanomicelles downscales the size of storage cells to 80 nm. Furthermore, the described system leads to a greatly enhanced storage density (>108 times over the same area), which opens up new paths for further development of ultrahigh-density data storage devices.

Visualizing Assembly Dynamics of All-Liquid 3D Architectures.

To better exploit all-liquid 3D architectures, it is essential to understand dynamic processes that occur during printing one liquid in a second immiscible liquid. Here, the interfacial assembly and transition of 5,10,15,20-tetrakis(4-sulfonatophenyl) porphyrin (H6 TPPS) over time provides an opportunity to monitor the interfacial behavior of nanoparticle surfactants (NPSs) during all-liquid printing. The formation of J-aggregates of H4 TPPS2- at the interface and the interfacial conversion of the J-aggregates of H4 TPPS2- to H-aggregates of H2 TPPS4- is demonstrated by interfacial rheology and in situ atomic force microscopy. Equally important are the chromogenic changes that are characteristic of the state of aggregation, where J-aggregates are green in color and H-aggregates are red in color. In all-liquid 3D printed structures, the conversion in the aggregate state with time is reflected in a spatially varying change in the color, providing a simple, direct means of assessing the aggregation state of the molecules and the mechanical properties of the assemblies, linking a macroscopic observable (color) to mechanical properties.

Highly Active La(III)-Based Metal-Organic Framework as a Heterogeneous Lewis Acid Catalyst for Friedel-Crafts Alkylation.

In this study, a novel La(III)-based two-dimensional (2D) metal-organic framework, [La2/3 (qptca)1/2 ] (referred to as SLX-2), from LaCl3 and 1,1' : 4',1'' : 4'',1''' : 4''',1''''-quinquephenyl]-2,2'',2'''',5''-tetracarboxylic acid (H4 qptca) was synthesized by conventional solvothermal method and thoroughly characterized by using X-ray single-crystal diffraction, powder X-ray diffraction, and thermogravimetric analyses. The 2D SLX-2 features a unique lanthanum center exposed to the skeleton and was used as an efficient Lewis acid catalyst for the Friedel-Crafts alkylation of indole and pyrrole with ß-nitrostyrene along with a wide substrate scope, giving the desired products in good-to-high yields under the optimal reaction conditions. Furthermore, the catalyst was used for twenty cycles, with nearly no effect on its activity, and the reaction was heterogeneous in nature. Moreover, compared to the previous hydrogen-bond-donating MOF catalysts for such alkylation reactions, SLX-2 showed an excellent stability toward harsh acidic and basic environment, and gave comparable catalytic activities.

Size-Selective Suzuki-Miyaura Coupling Reaction over Ultrafine Pd Nanocatalysts in a Water-Stable Indium-Organic Framework.

Metal nanoparticles stabilized by crystalline metal-organic frameworks (MOFs) are highly promising for green heterogeneous catalysis. In this work, in situ formed ultrafine Pd nanocatalysts with an average size of 3.14 nm have been successfully immobilized into the mesopores or defects of a water-stable indium-based MOF by the double-solvent method and subsequent reduction. Significantly, the obtained Pd@InOF-1 displays an obvious and satisfactory size-selective effect in the Suzuki-Miyaura coupling reaction between arylboronic acids and aryl bromides. On the basis of the synergistic effect, microporous InOF-1 nanorods afford a confined space for improving the selectivity of target products while Pd nanoparticles endow abundant active sites for catalysis. Herein, choosing the smallest size reactant with only one benzene ring gives the highest isolated yield of 90%, and if the size is larger, the yield is obviously reduced or even the target product could not be collected. Looking forward, this demonstrated study not only assembles a well-designed Pd@MOF composite with unique micro-nanostructures but also delivers an impressive option for cross-coupling reaction, which has implications for the further development of MOF hybrids for sustainable applications.

Croargoids A-G, Eudesmane Sesquiterpenes from the Bark of Croton argyratus.

Seven new sesquiterpenes, named croargoid A-G (1-7), were isolated from the bark of Croton argyratus. Compounds 1-4 were the first examples of eudesmane sesquiterpene lactones containing C5-OH group. Compound 7 was a highly degraded eudesmane sesquiterpene possessing a rare eleven-carbon skeleton. Their structures with stereochemistry were mainly elucidated by NMR analyses in combination with MS and ECD data. Cytotoxicities and NO inhibitions of all isolates were evaluated and only compound 5 showed moderate NO inhibitory activity.

Construction of Perylene-based Amphiphilic Micelle and Its Efficient Adsorption and In Situ Photodegradation of Bisphenol A in Aqueous Solution.

Low mass-transfer efficiency and reaction-driving force make it difficult to realize thorough purification in traditional low-concentration pollutant treatments. Herein, we propose an "adsorption/catalysis in situ" perylene based bifunctional micelle for efficient, accurate and rapid adsorption and catalytic degradation of low-concentration bisphenol A (BPA). They show super-fast (within 10 s), high capacity (448 mg g-1 ) and selectivity for BPA adsorption, due to π-π, hydrophobic interactions and hydrogen bonding. The BPA degradation efficiency improves by up to 8 times after forming micelles compared with simple perylene nanorods, which is primarily due to the superior mass-transfer from adsorption. Moreover, self-assembly can optimize the stacking of the perylene moieties and facilitate charge transfer in micelle, and the regular π-π stacking of inside perylene units enhances the response to visible light, resulting in high catalytic capacity and good cycling stability.