Mechanisms and models for water transport in reverse osmosis membranes: history, critical assessment, and recent developments.

Water scarcity is one of the greatest societal challenges facing humanity. Reverse osmosis (RO) desalination, a widely used membrane-based technology, has proven to be effective to augment water supply in water-stressed regions of our planet. However, progress in the design and development of RO membranes has been limited. To significantly enhance the performance of RO membranes, it is essential to acquire a deep understanding of the membrane separation and transport mechanisms. In this tutorial review, we cover the pivotal historical developments in RO technology, examine the chemical and physical properties of RO membrane materials, and critically review the models and mechanisms proposed for water transport in RO membranes. Based on recent experimental and computational findings, we conduct a thorough analysis of the key transport models-the solution-diffusion and pore-flow models-to assess their validity for accurately describing water transport in RO membranes. Our analysis involves examining the experimental evidence in favor of the solution-diffusion mechanism. Specifically, we explain whether the water content gradient within the membrane, cited as evidence for the key assumption in the solution-diffusion model, can drive a diffusive transport through RO membranes. Additionally, we review the recent molecular dynamics simulations which support the pore-flow mechanism for describing water transport in RO membranes. We conclude by providing future research directions aimed at addressing key knowledge gaps in water transport phenomena in RO membranes, with the goal of advancing the development of next-generation RO membranes.

"One-Pot" In Situ Tandem Reaction─Dy(III) Coordination-Catalyzed Multicomponent Condensation of Salicylaldehyde Derivatives to Obtain Ketals.

It is difficult to subject simple reaction starting materials to a "one-pot" in situ tandem reaction without post-treatment under mild reaction conditions to obtain multimers with complex structural linkages. In organic synthesis, acetal reactions are often used to protect derivatives containing carbonyl functional groups. Therefore, acetal products tend to have very low stability, and performing multi-step condensation to obtain complex multimeric products is difficult. Herein, we achieved the first efficient multiple condensation of o-vanillin derivatives using Dy(OAc)3·6H2O undergoing a "one-pot" in situ tandem reaction under mild solvothermal conditions to obtain a series of dimers (I and II, clusters 1 and 2) and trimers (I and II, clusters 3 and 4). When methanol or ethanol is used as the solvent, the alcoholic solvent participates in acetal and dehydration reactions to obtain dimers (I and II). Surprisingly, when using acetonitrile as the reaction solvent, the o-vanillin derivatives undergo acetal and dehydration reactions to obtain trimers (I and II). In addition, clusters 1-4 all showed distinct single-molecule magnetic behaviors under zero-field conditions. To the best of our knowledge, this is the first time that multiple acetal reactions catalyzed by coordination-directed catalysis under "one-pot" conditions have been realized, opening a new horizon for the development of fast, facile, green, and efficient synthetic methods for complex compounds.

Bioinspired N-Oxide-Based Zwitterionic Polymer Brushes for Robust Fouling-Resistant Surfaces.

Fouling-resistant surfaces are needed for various environmental applications. Inspired by superhydrophilic N-oxide-based osmolytes in saltwater fish, we demonstrate the use of a trimethylamine N-oxide (TMAO) analogue for constructing fouling-resistant surfaces. The readily synthesized N-oxide monomer of methacrylamide is grafted to filtration membrane surfaces by surface-initiated atom transfer radical polymerization (SI-ATRP). Successful grafting of the amine N-oxide brush layer as confirmed by material characterization endows the surface with increased hydrophilicity, reduced charge, and decreased roughness. Notably, the introduction of the N-oxide layer does not compromise transport properties, i.e., water permeability and water-salt selectivity. Moreover, the modified membrane exhibits improved antifouling properties with a lower flux decline (32.1%) and greater fouling reversibility (18.55%) than the control sample (45.4% flux decline and 3.26% fouling reversibility). We further evaluate foulant-membrane interaction using surface plasmon resonance (SPR) to relate the reduced fouling tendency to the synergic effects of surface characteristic changes after amine N-oxide modification. Our results demonstrate the promise and potential of the N-oxide-based polymer brushes for the design of fouling resistance surfaces for a variety of emerging environmental applications.

Anion-Manipulated Hydrolysis Process Assembles of Giant High-Nucleation Lanthanide-Oxo Cluster.

Widespread concern has been raised over the synthesis of highly nucleated lanthanide clusters with special shapes and/or specific linkages. Construction of lanthanide clusters with specific shapes and/or linkages can be achieved by carefully regulating the hydrolysis of lanthanide metal ions and the resulting hydrolysis products. However, studies on the manipulation of lanthanide-ion hydrolysis to obtain giant lanthanide-oxo clusters have been few. In this study, we obtained a tetraicosa lanthanide cluster (3) by manipulating the hydrolysis of Dy(III) ions using an anion (OAc-). As far as we know, cluster 3 has the highest nucleation among all lanthanide-oxo clusters reported. In 3, two triangular Dy3O4 are oriented in opposite directions to form the central connecting axis Dy6(OH)8, which is in turn connected to six Dy3O4 that are oriented in different directions. Meanwhile, a sample of a chiral trinuclear dysprosium cluster (1) was obtained in a mixed CH3OH and CH3CN solvent and by replacing the anion in the reaction to Cl- ions. In this cluster, 1,3,4-thiadiazole-2,5-diamine (L2) is free on one side through π···π interactions and is parallel to the o-vanillin (L1)- ligand, thus resulting in a triangular arrangement. The arrangement of L2 affects the end group coordination in the cluster 1 structure through hydrogen bonding and induces the cluster to exhibit chirality. When the reaction solvent was changed to CH3OH, a sample of cluster 2, composed of two independent triangular Dy3 that have different end group arrangements, was obtained. Magnetic analysis showed that clusters 1 and 3 both exhibit distinctive single-molecule magnetic properties under zero-magnetic-field conditions. This study thus provides a method for the creation of chiral high-nucleation clusters from achiral ligands and potentially paves the way for the synthesis of high-nucleation lanthanide clusters with unique forms.

Manipulating Solvothermal Coordination-Catalyzed In Situ Tandem Reactions to Construct Dysprosium-Based Complexes with Different Shapes and Zero-Field SMM Behaviors.

By changing the coordination anions (OAc- and Cl-), reaction temperature, solvent, and ligand substituents, four Dy(III)-based complexes were obtained by directed synthesis, which are [Dy4(L1)2(L2)2(OAc)4]·4C2H5OH·3H2O (1, L1 = 1,3,4-thiadiazole-2,5-diamine, H4L2 = 6,6'-(((1,3,4-thiadiazole-2,5-diyl)bis(azanediyl))bis(((3-ethoxy-2-hydroxybenzyl)oxy)methylene))bis(2-ethoxyphen), [Dy4(L3)4(OAc)4]·C2H5OH·H2O (2, H3L3 = 2-(((5-amino-1,3,4-thiadiazol-2-yl)amino)((3-ethoxy-2-hydroxybenzyl)oxy)methyl)-6-ethoxyphenol)), [Dy6(L4)4(L5)2(µ3-OH)4(CH3O)4Cl4]Cl2 (3, H2L4 = 2-hydroxy-3-methoxybenzaldehyde, H2L5 = 2-(((5-amino-1,3,4-thiadiazol-2-yl)amino)(hydroxy)methyl)-6-methoxyphenol), and [Dy6(L6)4(L7)2(µ3-OH)4(CH3O)4Cl4]Cl2·2H3O (4, H2L6 = 2-hydroxy-3-ethoxybenzaldehyde, H2L7 = 2-(((5-amino-1,3,4-thiadiazol-2-yl)amino)(hydroxy)methyl)-6-ethoxyphenol). A series of acetal products (H4L2, H3L3, H2L5, and H2L7) were obtained through dehydration in situ tandem reactions. Magnetic studies show that complexes 1-4 exhibited different single-molecule magnet behavior under zero-field conditions. The best fitting results showed that under zero DC field, the effective energy barriers (Ueff) and magnetic relaxation times (τ0) of complexes 1-4 are Ueff = 117.0 (2.1) K and τ0 = 6.07 × 10-7 s; Ueff = 83.91 (1.5) K and τ0 = 4.28 × 10-7 s; Ueff = 1.28 (0.2) K and τ0 = 0.73 s, and Ueff = 104.43 (13.3) K and τ0 = 8.25 × 10-8 s, respectively.

Fabrication of desalination membranes by interfacial polymerization: history, current efforts, and future directions.

Membrane desalination is a promising technology for addressing the global challenge of water scarcity by augmenting fresh water supply. Continuous progress in this technology relies on development of membrane materials. The state-of-the-art membranes used in a wide range of desalination applications are polyamide thin-film composite (TFC) membranes which are formed by interfacial polymerization (IP). Despite the wide use of such membranes in desalination, their real-world application is still hampered by several technical obstacles. These challenges of the TFC membranes largely stem from the inherent limitations of the polyamide chemistry, as well as the IP reaction mechanisms. In the past decade, we have witnessed substantial progress in the understanding of polyamide formation mechanisms and the development of new IP strategies that can potentially lead to the redesign of TFC membranes. In this Tutorial, we first present a brief history of the development of desalination membranes and highlight the major challenges of the existing TFC membranes. We then proceed to discuss the pros and cons of emerging IP-based fabrication strategies aiming at improving the performance of TFC membranes. Next, we present technical obstacles and recent efforts in the characterization of TFC membranes to enable fundamental understanding of relevant mechanisms. We conclude with a discussion of the current gap between industrial needs and academic research in designing high-performance TFC membranes, and provide an outlook on future research directions for advancing IP-based fabrication processes.

Joule-Heated Layered Double Hydroxide Sponge for Rapid Removal of Silica from Water.

Dissolved silica is a major concern for a variety of industrial processes owing to its tendency to form complex scales that severely deteriorate system performance. In this work, we present a pretreatment technology using a Joule-heated sponge to rapidly remove silica from saline waters through adsorption, thereby effectively mitigating silica scaling in subsequent membrane desalination processes. The adsorbent sponge is fabricated by functionalizing two-dimensional layered double hydroxide (LDH) nanosheets on a porous, conductive stainless-steel sponge. With the application of an external voltage of 4 V, the Joule-heated sponge achieves 85% silica removal and 95% sponge regeneration within 15 min, which is much more efficient than its counterpart without Joule-heating (360 min for silica adsorption and 90 min for sponge regeneration). Material characterization and reaction kinetics analysis reveal that electrostatic interactions and "memory effect"-induced intercalation are the primary mechanisms for silica removal by the LDH nanosheets. Moreover, Joule-heating reduces the boundary layer resistance on nanosheets and facilitates intraparticle diffusion of dissolved silica, thereby increasing silica removal kinetics. Joule-heating also enhances the release of silicate ions during the regeneration stage through exchange with the surrounding anions (OH- or CO32-), resulting in a more efficient sponge regeneration. Pretreatment of silica-rich feedwaters by the Joule-heated sponge effectively reduces reverse osmosis membrane scaling by amorphous silica scale, demonstrating great potential for silica scaling control in a broad range of engineered processes.

Graphene Oxide-Functionalized Membranes: The Importance of Nanosheet Surface Exposure for Biofouling Resistance.

Surface functionalization using two-dimensional (2D) graphene oxide (GO) materials is a promising technique to enhance the biofouling resistance of membranes used in water purification and reuse. However, the role of GO exposure, which is crucial for the contact-mediated toxicity mechanism, has not been well evaluated or elucidated in previous studies. Herein, we employ bioinspired polydopamine chemistry to fabricate GO-functionalized membranes through two strategies: coating and blending. The two types of GO-functionalized membranes displayed comparable roughness, hydrophilicity, water permeability, and solute retention properties but different degrees of GO nanosheet exposure on the membrane surface. When in contact with the model bacterium, Escherichia coli, the GO-coated membrane exhibited enhanced biofouling resistance compared to that of the GO-blended membrane, as evidenced by lower viable cells in static adsorption experiments, and lower water flux decline and higher flux recovery in dynamic biofouling experiments. Moreover, the development of biofilm on the GO-coated membrane was also inhibited to a greater extent than on the GO-blended membrane. Taken together, our findings indicate the paramount importance of GO exposure on the membrane surface in conferring antibacterial activity and biofouling resistance, which should be considered in the future design of antibiofouling membranes using 2D nanomaterials.

Utilization of Bidirectional Cation Transport in a Thin Film Composite Membrane: Selective Removal and Reclamation of Ammonium from Synthetic Digested Sludge Centrate via an Osmosis-Distillation Hybrid Membrane Process.

Selective removal and resource recovery of ammonium nitrogen (NH4+-N) from high-strength ammonium waste streams is of practical importance for biological wastewater treatment and environmental protection. In this study, we demonstrate the simultaneous removal and reclamation of ammonium from synthetic digested sludge centrate via a novel osmosis-distillation hybrid membrane (ODHM) process. Using NaHCO3 as the draw solute, ammonium diffuses from the synthetic centrate to the draw solution by utilizing the bidirectional cation transport nature of the thin film composite (TFC) membrane. Then, NH4+ is converted to gaseous NH3 at 60 °C and recovered by a sweeping gas membrane distillation (SGMD) process. Herein, the bidirectional transport of monovalent cations in the osmotic process, selectivity of TFC membranes for different cations, and recovery of the draw solution following the extraction of ammonia through the SGMD process were systematically investigated. The removal of NH4+-N from the synthetic centrate achieved 21.34% during a 6-h continuous operation of the ODHM system, with ammonium fluxes through the TFC and SGMD membranes at 1.39 and 0.57 mol m-2 h-1, respectively. A secondary interfacial polymerization was proposed to further enhance ammonium transport through the TFC membrane. Results reported here highlight the potential of the ODHM process for the selective removal and reclamation of ammonium from ammonium-rich waste streams.

Relating Selectivity and Separation Performance of Lamellar Two-Dimensional Molybdenum Disulfide (MoS2) Membranes to Nanosheet Stacking Behavior.

Increased demand for highly selective and energy-efficient separations processes has stimulated substantial interest in emerging two-dimensional (2D) nanomaterials as a potential platform for next-generation membranes. However, persistently poor separation performance continues to hinder the viability of many novel 2D-nanosheet membranes in desalination applications. In this study, we examine the role of the lamellar structure of 2D membranes on their performance. Using self-fabricated molybdenum disulfide (MoS2) membranes as a platform, we show that the separation layer of 2D nanosheet frameworks not only fails to demonstrate water-salt selectivity but also exhibits low rejection toward dye molecules. Moreover, the MoS2 membranes possess a molecular weight cutoff comparable to its underlying porous support, implying negligible selectivity of the MoS2 layer. By tuning the nanochannel size through intercalation with amphiphilic molecules and analyzing mass transport in the lamellar structure using Monte Carlo simulations, we reveal that small imperfections in the stacking of MoS2 nanosheets result in the formation of catastrophic microporous defects. These defects lead to a precipitous reduction in the selectivity of the lamellar structure by negating the interlayer sieving mechanism that prevents the passage of large penetrants. Notably, the imperfect stacking of nanosheets in the MoS2 membrane was further verified using 2D X-ray diffraction measurements. We conclude that developing a well-controlled fabrication process, in which the lamellar structure can be carefully tuned, is critical to achieving defect-free and highly selective 2D desalination membranes.

Enhanced antibacterial activity through the controlled alignment of graphene oxide nanosheets.

The cytotoxicity of 2D graphene-based nanomaterials (GBNs) is highly important for engineered applications and environmental health. However, the isotropic orientation of GBNs, most notably graphene oxide (GO), in previous experimental studies obscured the interpretation of cytotoxic contributions of nanosheet edges. Here, we investigate the orientation-dependent interaction of GBNs with bacteria using GO composite films. To produce the films, GO nanosheets are aligned in a magnetic field, immobilized by cross-linking of the surrounding matrix, and exposed on the surface through oxidative etching. Characterization by small-angle X-ray scattering and atomic force microscopy confirms that GO nanosheets align progressively well with increasing magnetic field strength and that the alignment is effectively preserved by cross-linking. When contacted with the model bacterium Escherichia coli, GO nanosheets with vertical orientation exhibit enhanced antibacterial activity compared with random and horizontal orientations. Further characterization is performed to explain the enhanced antibacterial activity of the film with vertically aligned GO. Using phospholipid vesicles as a model system, we observe that GO nanosheets induce physical disruption of the lipid bilayer. Additionally, we find substantial GO-induced oxidation of glutathione, a model intracellular antioxidant, paired with limited generation of reactive oxygen species, suggesting that oxidation occurs through a direct electron-transfer mechanism. These physical and chemical mechanisms both require nanosheet penetration of the cell membrane, suggesting that the enhanced antibacterial activity of the film with vertically aligned GO stems from an increased density of edges with a preferential orientation for membrane disruption. The importance of nanosheet penetration for cytotoxicity has direct implications for the design of engineering surfaces using GBNs.

Silica Removal Using Magnetic Iron-Aluminum Hybrid Nanomaterials: Measurements, Adsorption Mechanisms, and Implications for Silica Scaling in Reverse Osmosis.

Composite magnetic aluminum hydroxide at iron oxide nanomaterials, Al(OH)3@Fe3O4, with a well-defined core-shell structure, were used as pretreatment adsorbents for the removal of silica in brackish water. The Al(OH)3 outer shell confers silica adsorption capacity, and the superparamagnetic Fe3O4 core allows material separation and magnetic recovery. The as-prepared nanomaterials (2 g L-1) remove ∼95 and ∼80% silica from Si-rich solutions with 0.5 and 2 mM initial silica concentrations, respectively. Regeneration under basic conditions was evaluated, and post-adsorption treatment with 0.05 M NaOH yielded optimal material reusability. After four regeneration cycles, the Al(OH)3@Fe3O4 nanomaterials retain their magnetic property while still being able to remove ∼40% silica from solutions at an adsorbent concentration of 2 g L-1. The mechanism of silica adsorption onto the surface of the nanomaterials was probed using several spectroscopic techniques. ATR-FTIR (attenuated total reflection-Fourier transform infrared) integrated with two-dimensional correlation analysis shows that silica species vary from Q2 to Q4 with adsorption time corresponding to silica polymerization. 29Si solid-state NMR spectra show an upfield chemical shift displacement of the Q2 signal, which indicates the formation of Q4 units, suggesting silica polymerization onto the Al(OH)3 shell. In addition, a laboratory-scale reverse osmosis setup was used to evaluate Al(OH)3@Fe3O4 as pretreatment materials for silica removal. Results show that silica scaling was significantly alleviated, and water recovery was enhanced when feed waters were pretreated with the magnetic nanomaterials. Taken together, our study highlights the promise of magnetic Al(OH)3@Fe3O4 nanomaterials in treating brackish water and achieving higher water recovery for inland desalination.

Application of a New Geophone and Geometry in Tunnel Seismic Detection.

Seismic imaging is the most effective geophysical method and has been extensively implemented to detect potential geological hazards in tunnels during construction. The coupling of geophones and the design of geometry in tunnels are the two major challenges. To ensure successful coupling, a high-sensitivity semi-automatic coupling geophone with a broadband was designed. In practice, this geophone is attached with a wheel and two springs. Once inserted into the borehole, an automatic coupling action occurs. This semi-automatic coupling design within the geophone not only guarantees good coupling, but reduces the time and costs usually required to install a traditional geophone. In the use of geophones for tunnel seismic detection, we propose two new two-dimensional (2D) seismic geometries based on the two commonly used geometries. A test to assess the effectiveness of the qualities of imaging from four geometries was completed by comparing the results of the forward modeling of sandwich models. The conclusion is that the larger the horizontal offset of the layout geometry, the higher the resolution of the imaging; the larger the vertical offset, the weaker the mirror image. The vertical offset is limited due to the narrow tunnel condition. Therefore, the mirror effect cannot be entirely eliminated; however, it can be further suppressed by constructing 2D geometry. The two newly proposed 2D geometries caused the imaging arc of the inter-layer, but suppressed the mirror image. The mirror image added a significant number of errors to the data, which could misguide tunnel construction; therefore the new 2D geometries are more reasonable than the two most commonly used. We applied one of the two new 2D geometries that was more practical to an actual project, the Chongqing Jinyunshan Tunnel in China, and acquired high-quality seismic data using two semi-automatic coupling geophones. The detection results were essentially consistent with the excavation conclusions.

A Semi-Automatic Coupling Geophone for Tunnel Seismic Detection.

The tunnel seismic method allows for the detection of the geology in front of a tunnel face for the safety of tunnel construction. Conventional geophones have problems such as a narrow spectral width, low sensitivity, and poor coupling with the tunnel wall. To tackle issues above, we propose a semi-automatic coupling geophone equipped with a piezoelectric sensor with a spectral range of 10-5000 Hz and a sensitivity of 2.8 V/g. After the geophone was manually pushed into the borehole, it automatically coupled with the tunnel wall under the pressure of the springs within the device. A comparative experiment showed that the data spectrum acquired by the semi-automatic coupling geophone was much higher than that of the conventional geophone equipped with the same piezoelectric sensor. The seismic data were processed in combination with forward modeling. The imaging results also show that the data acquired by the semi-automatic coupling geophone were more in line with the actual geological conditions. In addition, the semi-automatic coupling geophone's installation requires a lower amount of time and cost. In summary, the semi-automatic coupling geophone is able to efficiently acquire seismic data with high fidelity, which can provide a reference for tunnel construction safety.

Production of sulfate radical and hydroxyl radical by reaction of ozone with peroxymonosulfate: a novel advanced oxidation process.

In this work, simultaneous generation of hydroxyl radical (•OH) and sulfate radical (SO4•−) by the reaction of ozone (O3) with peroxymonosulfate (PMS; HSO5−) has been proposed and experimentally verified. We demonstrate that the reaction between the anion of PMS (i.e.,SO52−) and O3 is primarily responsible for driving O3 consumption with a measured second order rate constant of (2.12 ± 0.03) × 10(4) M(-1) s(-1). The formation of both •OH and SO4•− from the reaction between SO52− and O3 is confirmed by chemical probes (i.e., nitrobenzene for •OH and atrazine forb oth •OH and SO4•−). The yields of •OH and SO4•− are determined to be 0.43 ± 0.1 and 0.45 ± 0.1 per mol of O3 consumption, respectively. An adduct,−O3SOO− + O3 → −O3SO5−, is assumed as the first step, which further decomposes into SO5•− and O3•−. The subsequent reaction of SO5•− with O3is proposed to generate SO4•−, while O3•− converts to •OH. A definition of R(ct,•OH) and R(ct,SO4•−) (i.e., respective ratios of •OH and SO4•− exposures to O3 exposure) is adopted to quantify relative contributions of •OH and SO4•−. Increasing pH leads to increases in both values of R(ct,•OH) and R(ct,SO4•−) but does not significantly affect the ratio of R(ct,SO4•−) to R(ct,•OH) (i.e., R(ct,SO4•−)/R(ct,•OH)), which represents the relative formation of SO4•− to •OH. The presence of bicarbonate appreciably inhibits the degradation of probes and fairly decreases the relative contribution of •OH for their degradation, which may be attributed to the conversion of both •OH and SO4•− to the more selective carbonate radical (CO3•−).Humic acid promotes O3 consumption to generate •OH and thus leads to an increase in the R(ct,•OH) value in the O3/PMS process,w hile humic acid has negligible influence on the R(ct,SO4•−) value. This discrepancy is reasonably explained by the negligible effect of humic acid on SO4•− formation and a lower rate constant for the reaction of humic acid with SO4•− than with •OH. In addition, the efficacy of the O3/PMS process in real water is also confirmed.

Influence of active layer and support layer surface structures on organic fouling propensity of thin-film composite forward osmosis membranes.

In this study, we investigate the influence of surface structure on the fouling propensity of thin-film composite (TFC) forward osmosis (FO) membranes. Specifically, we compare membranes fabricated through identical procedures except for the use of different solvents (dimethylformamide, DMF and N-methyl-2-pyrrolidinone, NMP) during phase separation. FO fouling experiments were carried out with a feed solution containing a model organic foulant. The TFC membranes fabricated using NMP (NMP-TFC) had significantly less flux decline (7.47 ± 0.15%) when compared to the membranes fabricated using DMF (DMF-TFC, 12.70 ± 2.62% flux decline). Water flux was also more easily recovered through physical cleaning for the NMP-TFC membrane. To determine the fundamental cause of these differences in fouling propensity, the active and support layers of the membranes were extensively characterized for physical and chemical characteristics relevant to fouling behavior. Polyamide surface roughness was found to dominate all other investigated factors in determining the fouling propensities of our membranes relative to each other. The high roughness polyamide surface of the DMF-TFC membrane was also rich in larger leaf-like structures, whereas the lower roughness NMP-TFC membrane polyamide layer contained more nodular and smaller features. The support layers of the two membrane types were also characterized for their morphological properties, and the relation between support layer surface structure and polyamide active layer formation was discussed. Taken together, our findings indicate that support layer structure has a significant impact on the fouling propensity of the active layer, and this impact should be considered in the design of support layer structures for TFC membranes.

Bidirectional diffusion of ammonium and sodium cations in forward osmosis: role of membrane active layer surface chemistry and charge.

Systematic fundamental understanding of mass transport in osmosis-driven membrane processes is important for further development of this emerging technology. In this work, we investigate the role of membrane surface chemistry and charge on bidirectional solute diffusion in forward osmosis (FO). In particular, bidirectional diffusion of ammonium (NH4(+)) and sodium (Na(+)) is examined using FO membranes with different materials and surface charge characteristics. Using an ammonium bicarbonate (NH4HCO3) draw solution, we observe dramatically enhanced cation fluxes with sodium chloride feed solution compared to that with deionized water feed solution for thin-film composite (TFC) FO membrane. However, the bidirectional diffusion of cations does not change, regardless of the type of feed solution, for cellulose triacetate (CTA) FO membrane. We relate this phenomenon to the membrane fixed surface charge by employing different feed solution pH to foster different protonation conditions for the carboxyl groups on the TFC membrane surface. Membrane surface modification is also carried out with the TFC membrane using ethylenediamine to alter carboxyl groups into amine groups. The modified TFC membrane, with less negatively charged groups, exhibits a significant decrease in the bidirectional diffusion of cations under the same conditions employed with the pristine TFC membrane. Based on our experimental observations, we propose Donnan dialysis as a mechanism responsible for enhanced bidirectional diffusion of cations in TFC membranes.

Depolymerization mechanisms and closed-loop assessment in polyester waste recycling.

Alcoholysis of poly(ethylene terephthalate) (PET) waste to produce monomers, including methanolysis to yield dimethyl terephthalate (DMT) and glycolysis to generate bis-2-hydroxyethyl terephthalate (BHET), is a promising strategy in PET waste management. Here, we introduce an efficient PET-alcoholysis approach utilizing an oxygen-vacancy (Vo)-rich catalyst under air, achieving space time yield (STY) of 505.2 gDMT·gcat-1·h-1 and 957.1 gBHET·gcat-1·h-1, these results represent 51-fold and 28-fold performance enhancements compared to reactions conducted under N2. In situ spectroscopy, in combination with density functional theory calculations, elucidates the reaction pathways of PET depolymerization. The process involves O2-assisted activation of CH3OH to form CH3OH* and OOH* species at Vo-Zn2+-O-Fe3+ sites, highlighting the critical role of Vo-Zn2+-O-Fe3+ sites in ester bond activation and C-O bond cleavage. Moreover, a life cycle assessment demonstrates the viability of our approach in closed-loop recycling, achieving 56.0% energy savings and 44.5% reduction in greenhouse-gas emissions. Notably, utilizing PET textile scrap further leads to 58.4% reduction in initial total operating costs. This research offers a sustainable solution to the challenge of PET waste accumulation.

In situ surface chemical modification of thin-film composite forward osmosis membranes for enhanced organic fouling resistance.

Forward osmosis (FO) is an emerging membrane-based water separation process with potential applications in a host of environmental and industrial processes. Nevertheless, membrane fouling remains a technical obstacle affecting this technology, increasing operating costs and decreasing membrane life. This work presents the first fabrication of an antifouling thin-film composite (TFC) FO membrane by an in situ technique without postfabrication treatment. The membrane was fabricated and modified in situ, grafting Jeffamine, an amine-terminated poly(ethylene glycol) derivative, to dangling acyl chloride surface groups on the nascent polyamide active layer. Surface characterization by contact angle, Fourier transform infrared spectroscopy (ATR-FTIR), X-ray photoelectron spectroscopy (XPS), zeta potential, atomic force microscopy (AFM), and fluorescence microscopy, confirms the presence of Jeffamine on the membrane surface. We demonstrate the improved fouling resistance of the in situ modified membranes through accelerated dynamic fouling FO experiments using a synthetic wastewater feed solution at high concentration (250 mg/L) of alginate, a model macromolecule for the hydrophilic fraction of wastewater effluent organic matter. Our results show a significantly lower flux decline for the in situ modified membranes compared to pristine polyamide (14.3 ± 2.7% vs 2.8 ± 1.4%, respectively). AFM adhesion force measurements between the membrane and a carboxylate-modified latex particle, a surrogate for the organic (alginate) foulant, show weaker foulant-membrane interactions, further confirming the enhanced fouling resistance of the in situ modified membranes.

Stabilizing Differential Interfacial Curvatures by Mismatched Molecular Geometries: Toward Polymers with Percolating 1 nm Channels of Gyroid Minimal Surfaces.

Soft materials with self-assembled networks possess saddle-shaped interfaces with distributed negative Gaussian curvatures. The ability to stabilize such a geometry is critically important for various applications but can be challenging due to the possibly "deficient" packing of the building blocks. This nontrivial challenge has been manifested, for example, by the limited availability of cross-linkable bicontinuous cubic (Q) liquid crystals (LCs), which can be utilized to fabricate compelling polymers with networked nanochannels uniformly sized at ∼1 nm. Here, we devise a facile approach to stabilizing cross-linkable Q mesophases by leveraging the synergistic self-assembly from pairs of scalably synthesized polymerizable amphiphiles. Hybridization of the molecular geometries by mixing significantly increases the propensity of the local deviations in the interfacial curvature specifically required for Q assemblies. "Normal" (type 1) double gyroid LCs possessing 1 nm ionic channels conforming to minimal surfaces can be formulated by simultaneous hydration of the amphiphile mixtures, as opposed to the formation of hexagonal or lamellar mesophases exhibited by the single-amphiphile systems, respectively. Fixation of the bicontinuous network in polymers via radical polymerization has been efficaciously facilitated by the presence of the bifunctional polymerizable groups in one of the employed amphiphiles. High-fidelity lock-in of the ordered continuous 1 nm channels has been unambiguously confirmed by the observation of single-crystal-like diffraction patterns from synchrotron small-angle X-ray scattering and large-area periodicities by transmission electron microscopy. The produced polymeric materials exhibit the required mechanical integrity as well as chemical robustness in a variety of organic solvents that benefit their practical applications for selective transport of ions and molecules.