On-Chip Photoacoustics-Activated Cell Sorting (PA-ACS) for Label-Free and High-Throughput Detection and Screening of Microalgal Cells.

Microalgae play a crucial role in global carbon cycling as they convert carbon dioxide into various valuable macromolecules. Among them, Haematococcus pluvialis (H. pluvialis) is the richest natural source of astaxanthin (AXT), which is a valuable antioxidant, anti-inflammatory, and antiapoptosis agent. These benefits make AXT highly commercially valuable in pharmaceuticals, cosmetics, and nutritional industries. However, intrinsic genetic characteristics and extrinsic cultivation conditions influence biomass gains, leading to low productivity and extraction as the main techno-economic bottlenecks in this industry. Thus, detecting AXT in H. pluvialis is essential to determine the influence of multiple parameters on biocompound accumulation, enabling optimization of cultivation and enrichment of AXT-rich H. pluvialis cells. This work developed an opto-acousto-fluidic microplatform for detection, analysis, and sorting of microalgae. Via label-free monitoring and extraction of sample-induced ultrasonic signals, a photoacoustic microscopic system was proposed to provide a full-field visualization of AXT's content and distribution inside H. pluvialis cells. When employed as on-chip image-based flow cytometry, our microplatform can also offer high-throughput measurements of intracellular AXT in real time, which demonstrates similar results to conventional spectrophotometry methods and further reveals the heterogeneity of AXT content at the single-cell level. In addition, a solenoid valve-pump dual-mode cell sorter was integrated for effective sorting of cells with a maximum working frequency of 0.77 Hz, reducing the fluid response time by 50% in rising and 40-fold in recovery. The H. pluvialis cells which have more AXT accumulation (>30 µm in diameter) were 4.38-fold enriched with almost no dead empty and small green cells. According to the results, automated and reliable photoacoustics-activated cell sorting (PA-ACS) can screen AXT-rich cells and remove impurities at the terminal stage of cultivation, thereby increasing the effectiveness and purity of AXT extraction. The proposed system can be further adopted to enrich strains and mutants for the production of biofuels or other rare organic substances such as ß-carotene and lutein.

Insight into the Mechanisms Driving the Self-Assembly of Functional Interfaces: Moving from Lipids to Charged Amphiphilic Oligomers.

Polymer-stabilized liquid/liquid interfaces are an important and growing class of bioinspired materials that combine the structural and functional capabilities of advanced synthetic materials with naturally evolved biophysical systems. These platforms have the potential to serve as selective membranes for chemical separations and molecular sequencers and to even mimic neuromorphic computing elements. Despite the diversity in function, basic insight into the assembly of well-defined amphiphilic polymers to form functional structures remains elusive, which hinders the continued development of these technologies. In this work, we provide new mechanistic insight into the assembly of an amphiphilic polymer-stabilized oil/aqueous interface, in which the headgroups consist of positively charged methylimidazolium ionic liquids, and the tails are short, monodisperse oligodimethylsiloxanes covalently attached to the headgroups. We demonstrate using vibrational sum frequency generation spectroscopy and pendant drop tensiometery that the composition of the bulk aqueous phase, particularly the ionic strength, dictates the kinetics and structures of the amphiphiles in the organic phase as they decorate the interface. These results show that H-bonding and electrostatic interactions taking place in the aqueous phase bias the grafted oligomer conformations that are adopted in the neighboring oil phase. The kinetics of self-assembly were ionic strength dependent and found to be surprisingly slow, being composed of distinct regimes where molecules adsorb and reorient on relatively fast time scales, but where conformational sampling and frustrated packing takes place over longer time scales. These results set the stage for understanding related chemical phenomena of bioinspired materials in diverse technological and fundamental scientific fields and provide a solid physical foundation on which to design new functional interfaces.

Optofluidic refractive index sensor based on asymmetric diffraction.

A novel optofluidic refracrtive index (RI) sensor was proposed based on asymmetric Fraunhofer diffraction. In-plane optofluidic lens, light source, slit, diffraction pattern visualization zone and optical path were integrated into the microfluidic networks to avoid the manual alignment of the optical components as well as to reduce the cost of external bulky components. Unlike the conventional RI sensor, this device visualizes the bulk refractive index change of the liquid through a diffraction image, which is readily read-out for clinical diagnosis right at the point-of-care or on-site security check. In the experiment, the device can measure a RI change of as low as ~10-5 RIU. A low noise-equivalent detection limit (NEDL) of ~10-6 refractive index unit (RIU) and high sensitivity of ~1.1 × 104/RIU were achieved. The new device is practical and suitable to be extended for high throughput applications by simultaneously reading multiple chips with an 2D-array image sensor.

EFFICACY AND SAFETY OF INTRAVITREAL CONBERCEPT INJECTIONS IN MACULAR EDEMA SECONDARY TO RETINAL VEIN OCCLUSION.

PURPOSE: To assess the efficacy and safety of intravitreal conbercept injections in patients with macular edema secondary to retinal vein occlusion (RVO). METHODS: A prospective, Phase II clinical trial was performed on 60 patients with macular edema secondary to RVO. Thirty patients had branch RVO (BRVO) and 30 had central RVO (CRVO). Each patient received intravitreal injections of conbercept monthly up to 3 months, followed by monthly evaluation and injection pro re nata to Month 9. RESULTS: The average change of best-corrected visual acuity from baseline to Month 9 was 17.83 ± 10.89 letters in BRVO and 14.23 ± 11.74 letters in CRVO. The change in best-corrected visual acuity was not statistically different between the groups (P = 0.216). The mean reduction of central retina thickness from baseline to Month 9 was 289.97 ± 165.42 µm and 420.47 ± 235.89 µm in BRVO and CRVO, respectively. The mean numbers of injections was 7.14 ± 1.90 in BRVO and 7.59 ± 1.39 in CRVO from baseline to Month 9 (P = 0.4705). There were 7 serious adverse events (SAEs) in 5 patients (8.33%, 2 BRVO and 3 CRVO). All the SAEs were nonocular and were not related to the drug or the injection procedure. CONCLUSION: Intravitreal injections of conbercept demonstrated a generally favorable safety and tolerability profile as well as efficacy in the treatment of macular edema due to RVO.

Chemoselective Radical Dehalogenation and C-C Bond Formation on Aryl Halide Substrates Using Organic Photoredox Catalysts.

Despite the number of methods available for dehalogenation and carbon-carbon bond formation using aryl halides, strategies that provide chemoselectivity for systems bearing multiple carbon-halogen bonds are still needed. Herein, we report the ability to tune the reduction potential of metal-free phenothiazine-based photoredox catalysts and demonstrate the application of these catalysts for chemoselective carbon-halogen bond activation to achieve C-C cross-coupling reactions as well as reductive dehalogenations. This procedure works both for conjugated polyhalides as well as unconjugated substrates. We further illustrate the usefulness of this protocol by intramolecular cyclization of a pyrrole substrate, an advanced building block for a family of natural products known to exhibit biological activity.

Highly ordered nanoporous films from supramolecular diblock copolymers with hydrogen-bonding junctions.

We designed efficient precursors that combine complementary associative groups with exceptional binding affinities and thiocarbonylthio moieties enabling precise RAFT polymerization. Well defined PS and PMMA supramolecular polymers with molecular weights up to 30 kg mol(-1) are synthesized and shown to form highly stable supramolecular diblock copolymers (BCPs) when mixed, in non-polar solvents or in the bulk. Hierarchical self-assembly of such supramolecular BCPs by thermal annealing affords morphologies with excellent lateral order, comparable to features expected from covalent diblock copolymer analogues. Simple washing of the resulting materials with protic solvents disrupts the supramolecular association and selectively dissolves one polymer, affording a straightforward process for preparing well-ordered nanoporous materials without resorting to crosslinking or invasive chemical degradations.

[3,3]-Sigmatropic rearrangement versus carbene formation in gold-catalyzed transformations of alkynyl aryl sulfoxides: mechanistic studies and expanded reaction scope.

Gold-catalyzed intramolecular oxidation of terminal alkynes with an arenesulfinyl group as the tethered oxidant is a reaction of high impact in gold chemistry, as it introduced to the field the highly valued concept of gold carbene generation via alkyne oxidation. The proposed intermediacy of α-oxo gold carbenes in these reactions, however, has never been substantiated. Detailed experimental studies suggest that the involvement of such reactive intermediates in the formation of dihydrobenzothiepinones is highly unlikely. Instead, a [3,3]-sigmatropic rearrangement of the initial cyclization intermediate offers a reaction path that can readily explain the high reaction efficiency and the lack of sulfonium formation. With internal alkyne substrates, however, the generation of a gold carbene species becomes competitive with the [3,3]-sigmatropic rearrangement. This reactive intermediate, nevertheless, does not proceed to afford the Friedel-Crafts-type cyclization product. Extensive density functional theory studies support the mechanistic conclusion that the cyclized product is formed via an intramolecular [3,3]-sigmatropic rearrangement instead of the previously proposed Friedel-Crafts-type cyclization. With the new mechanistic insight, the product scope of this versatile formation of mid-sized sulfur-containing cycloalkenones has been expanded readily to various dihydrobenzothiocinones, a tetrahydrobenzocyclononenone, and even those without the entanglement of a fused benzene ring. Besides gold, Hg(OTf)2 can be an effective catalyst, thereby offering a cheap alternative for this intramolecular redox reaction.

Dispersive phase microscopy incorporated with droplet-based microfluidics for biofactory-on-a-chip.

Biomolecular imaging of intracellular structures of a single cell and subsequent screening of the cells are of high demand in metabolic engineering to develop strains with the desired phenotype. However, the capability of current methods is limited to population-scale identification of cell phenotyping. To address this challenge, we propose to utilize dispersive phase microscopy incorporated with a droplet-based microfluidic system that combines droplet volume-on-demand generation, biomolecular imaging, and droplet-on-demand sorting, to achieve high-throughput screening of cells with an identified phenotype. Particularly, cells are encapsulated in homogeneous environments with microfluidic droplet formation, and the biomolecule-induced dispersive phase can be investigated to indicate the biomass of a specific metabolite in a single cell. The retrieved biomass information consequently guides the on-chip droplet sorting unit to screen cells with the desired phenotype. To demonstrate the proof of concept, we showcase the method by promoting the evolution of the Haematococcus lacustris strain toward a high production of natural antioxidant astaxanthin. The validation of the proposed system with on-chip single-cell imaging and droplet manipulation functionalities reveals the high-throughput single-cell phenotyping and selection potential that applies to many other biofactory scenarios, such as biofuel production, critical quality attribute control in cell therapy, etc.

Tempering the reactivities of postulated α-oxo gold carbenes using bidentate ligands: implication of tricoordinated gold intermediates and the development of an expedient bimolecular assembly of 2,4-disubstituted oxazoles.

2,4-Oxazole is an important structural motif in various natural products. An efficient modular synthesis of this structure has been achieved via a [3 + 2] annulation between a terminal alkyne and a carboxamide using a gold-catalyzed oxidation strategy. The postulated reactive intermediate, a terminal α-oxo gold carbene, previously known to be highly electrophilic and hence unlikely to be trapped by stoichiometric external nucleophiles, is coerced to react smoothly with the carboxamide en route to the oxazole ring by a P,N- or P,S-bidentate ligand such as Mor-DalPhos; in stark contrast, often-used ligands such as monodentate phosphines and N-heterocyclic carbenes are totally ineffective. The role of these bidentate phosphines in this reaction is attributed to the formation of a tricoordinated gold carbene intermediate, which is less electrophilic and hence more chemoselective when reacting with nucleophiles. The success in using bidentate phosphine ligands to temper the reactivities of in situ-generated gold carbenes is likely to open many new opportunities to apply oxidative gold catalysis to the development of novel methods, and the implication of tricoordinated gold intermediates in homogeneous gold catalysis should stimulate further advances in gold catalysis.

Mechanism of gold(I)-catalyzed rearrangements of acetylenic amine-N-oxides: computational investigations lead to a new mechanism confirmed by experiment.

Quantum mechanical studies of the mechanism of gold-catalyzed rearrangements of acetylenic amine-N-oxides to piperidinones or azepanones have revealed a new mechanism involving a concerted heteroretroene reaction, formally a 1,5 hydrogen shift from the N-alkyl groups to the vinyl position of a gold-coordinated methyleneisoxazolidinium or methyleneoxazinanium. Density functional calculations (B3LYP, B3LYP-D3) on the heteroretroene mechanism reproduce experimental regioselectivities and provide an explanation as to why the hydrogen is transferred from the smaller amine substituent. In support of the proposed mechanism, new experimental investigations show that the hydrogen shift is concerted and that gold carbenes are not involved as reaction intermediates.

Gold-catalyzed regioselective oxidation of terminal allenes: formation of α-methanesulfonyloxy methyl ketones.

Synthetically useful α-methanesulfonyloxy methyl ketones are readily prepared in one-step from terminal allenes in fair to good yields. The chemistry relies on a gold-catalyzed intermolecular oxidation of the 1,2-diene unit using 3,5-dichloropyridine N-oxide as the oxidant. The reaction tolerates a range of functional groups and shows excellent regioselectivity.

Three-dimensional visualization and analysis of flowing droplets in microchannels using real-time quantitative phase microscopy.

Recent years have witnessed the development of droplet-based microfluidics as a useful and effective tool for high-throughput analysis in biological, chemical and environmental sciences. Despite the flourishing development of droplet manipulation techniques, only a few methods allow for label-free and quantitative inspection of flowing droplets in microchannels in real-time and in three dimensions (3-D). In this work, we propose and demonstrate the application of a real-time quantitative phase microscopy (RT-QPM) technique for 3-D visualization of droplets, and also for full-field and label-free measurement of analyte concentration distribution in the droplets. The phase imaging system consists of a linear-CCD-based holographic microscopy configuration and an optofluidic phase-shifting element, which can be used for retrieving quantitative phase maps of flowing objects in the microchannels with a temporal resolution only limited to the frame rate of the CCD camera. To demonstrate the capabilities of the proposed imaging technique, we have experimentally validated the 3-D image reconstruction of the droplets generated in squeezing and dripping regimes and quantitatively investigated the volumetric and morphological variation of droplets as well as droplet parameters related to the depth direction under different flow conditions. We also demonstrated the feasibility of using this technique, as a refractive index sensor, for in-line quantitative measurement of carbamide analyte concentration within the flowing droplets.

Engineering Edge States of Graphene Nanoribbons for Narrow-Band Photoluminescence.

Solid-state narrow-band light emitters are on-demand for quantum optoelectronics. Current approaches based on defect engineering in low-dimensional materials usually introduce a broad range of emission centers. Here, we report narrow-band light emission from covalent heterostructures fused to the edges of graphene nanoribbons (GNRs) by controllable on-surface reactions from molecular precursors. Two types of heterojunction (HJ) states are realized by sequentially synthesizing GNRs and graphene nanodots (GNDs) and then coupling them together. HJs between armchair GNDs and armchair edges of the GNR are coherent and give rise to narrow-band photoluminescence. In contrast, HJs between the armchair GNDs and the zigzag ends of GNRs are defective and give rise to nonradiative states near the Fermi level. At low temperatures, sharp photoluminescence emissions with peak energy range from 2.03 to 2.08 eV and line widths of 2-5 meV are observed. The radiative HJ states are uniform, and the optical transition energy is controlled by the band gaps of GNRs and GNDs. As these HJs can be synthesized in a large quantity with atomic precision, this finding highlights a route to programmable and deterministic creation of quantum light emitters.

Investigation of an efficient palladium-catalyzed C(sp)-C(sp) cross-coupling reaction using phosphine-olefin ligand: application and mechanistic aspects.

A pi-acceptor phosphine-electron-deficient olefin ligand was found effective in promoting Pd-catalyzed C(sp)-C(sp) cross-coupling reactions. The new protocol realized the cross-coupling of a broad scope of terminal alkynes and haloalkynes in good to excellent yields with high selectivities. Electron-rich alkynes, which are normally difficult substrates in Glaser couplings, could be employed as either nucleophiles or electrophiles. Alkynes bearing similar substituents, such as n-C5H11CCBr and n-C4H9CCH, which usually suffer from homocoupling side reactions under Cadiot-Chodkiewicz conditions, were successfully cross-coupled in the system. Preliminary kinetic studies revealed that the reaction rate was zero-order in the concentrations of both haloalkynes and terminal alkynes and first order in the loading of Pd(dba)2 and exhibited no obvious dependence on the loading of the copper salt. Control experiments with other phosphines such as PPh3 and DPPF as the ligand were carried out. All the kinetic evidence indicated that the phosphine-olefin ligand facilitated the reductive elimination in the catalytic cycle.

Tuning of protease resistance in oligopeptides through N-alkylation.

N-Methylation of amino acids is an effective way to create protease resistance in both natural and synthetic peptides. However, alkyl substituents other than N-methyl have not been extensively studied. Here, we prepare and examine a series of N-substituted peptides in which the size and length of the alkyl group is modulated. These design insights provide a unique and modular handle for tuning proteolysis in oligopeptides.

Deuteration as a Means to Tune Crystallinity of Conducting Polymers.

The effects of deuterium isotope substitution on conjugated polymer chain stacking of poly(3-hexylthiophene) is studied experimentally by X-ray diffraction (XRD) in combination with gel permeation chromatography and theoretically using density functional theory and quantum molecular dynamics. For four P3HT materials with different levels of deuteration (pristine, main-chain deuterated, side-chain deuterated, and fully deuterated), the XRD measurements show that main-chain thiophene deuteration significantly reduces crystallinity, regardless of the side-chain deuteration. The reduction of crystallinity due to the main-chain deuteration is a quantum nuclear effect resulting from a static zero-point vibrational energy combined with a dynamic correlation of the dipole fluctuations. The quantum molecular dynamics simulations confirm the interchain correlation of the proton-proton and deuteron-deuteron motions but not of the proton-deuteron motion. Thus, isotopic purity is an important factor affecting stability and properties of conjugated polymer crystals, which should be considered in the design of electronic and spintronic devices.

Relationships of orientation discrimination threshold and visual acuity with macular lesions in age-related macular degeneration.

PURPOSE: To measure visual acuity and metamorphopsia in patients with age-related macular degeneration (AMD) and to explore their relationship with macular lesions. METHODS: In this cross-sectional study, a total of 32 normal subjects (32 eyes) and 35 AMD patients (35 eyes) were recruited. They were categorized into 4 groups: normal, dry AMD, non-active wet AMD, and active wet AMD. Best-corrected visual acuity (BCVA) was measured using the Early Treatment Diabetic Retinopathy Study protocol. Metamorphopsia was quantified with the orientation discrimination threshold (ODT). Macular lesions, including drusen, sub-retinal fluid (SRF), intra-retinal fluid (IRF), pigmented epithelium detachment (PED), and scarring, were identified with spectral-domain optical coherence tomography (SD-OCT). A linear regression model was established to identify the relationships between the functional and structural changes. RESULTS: BCVA progressively worsened across the normal, dry AMD, non-active wet AMD, and active wet AMD groups (P < 0.001), and ODT increased across the groups (P < 0.001). The correlation between BCVA and ODT varied among the groups. The partial correlation between BCVA and ODT was -0.61 (P < 0.001). Linear regression showed that ODT significantly depended on IRF (ß = 0.61, P < 0.001), SRF (ß = 0.34, P = 0.003), and scarring (ß = 0.26, P = 0.050), while BCVA significantly depended only on scarring (ß = -0.52, P < 0.001), and IRF (ß = -0.36, P = 0.016). CONCLUSIONS: From dry AMD to active wet AMD, BCVA gradually worsened while ODT increased. The correlation between BCVA and ODT varied among these groups, indicating that AMD lesions affect them differently. ODT and BCVA should be used concurrently for better monitoring of the disease.

Effects of Tailored Dispersity on the Self-Assembly of Dimethylsiloxane-Methyl Methacrylate Block Co-Oligomers.

The effect of dispersity on block polymer self-assembly was studied in the monodisperse limit using a combination of synthetic chemistry, matrix-assisted laser desorption ionization spectroscopy, and small-angle X-ray scattering. Oligo(methyl methacrylate) (oligoMMA) and oligo(dimethylsiloxane) (oligoDMS) homopolymers were synthesized by conventional polymerization techniques and purified to generate an array of discrete, semidiscrete, and disperse building blocks. Coupling reactions afforded oligo(DMS-MMA) block polymers with precisely tailored molar mass distributions spanning single molecular systems (D = 1.0) to low-dispersity mixtures (D ≈ 1.05). Discrete materials exhibit a pronounced decrease in domain spacing and sharper scattering reflections relative to disperse analogues. The order-disorder transition temperature (TODT) also decreases with increasing dispersity, suggesting stabilization of the disordered phase, presumably due to the strengthening of composition fluctuations at the low molar masses investigated.