Construction of 3D network aluminum sludge-based hydrogel beads: combination of macroization, amino functionalization, and resource utilization.

An aluminum sludge-based composite material was constructed against the problems of phosphorus pollution and the waste of aluminum sludge resources. Utilizing metal Ce doping and hydrogel microbeads with pore preparation, the adsorption performance of the original sludge was improved. Meanwhile, the macroscopic body was constructed, and on this basis, polyethyleneimine (PEI) was introduced to complete the amino functionalization further to enhance the adsorption of phosphorus by the adsorbent, and NH-CeAIS-10 microbeads were successfully prepared. In adsorption, microbeads with larger specific surface area and richer functional groups are better choice compared to original sludge. The results of SEM, BET, FT-IR, and XPS analyses indicate that the adsorption of phosphorus by the microbeads is mainly achieved through electrostatic interactions, ligand exchange, and the formation of inner-sphere complexes. According to the Langmuir model, the maximum phosphorus adsorption capacity of NH-CeAIS-10 was 29.56 mg g-1, which was four times higher compared to native aluminum sludge. This also confirms the significant enhancement of phosphorus adsorption through the modification of aluminum sludge. Besides, in dynamic adsorption column experiments, the material exhibited up to 99% removal in simulated wastewater for up to 30 days, demonstrating the great adsorption potential of NH-CeAIS-10 in engineering applications.

Achieving win-win outcomes with cerium-loaded porous aluminum sludge hydrogel microspheres for enhanced phosphate removal.

Breaking the technical bottleneck of traditional powdered adsorbent in phosphate adsorption application treatment, a macroscopic high adsorption performance aluminum sludge-based composite hydrogel material was constructed to synergistically solve the problems of water eutrophication and aluminum sludge resourcization. In this study, porous Ce-modified aluminum sludge hydrogel microspheres (Ce-AlS-SA) were prepared to improve the surface chemical structure and microscopic morphology of the macroscopic adsorbent material to enhance the adsorption capacity and achieve effective solid-liquid separation. The best adsorption performance of the material (Ce-AlS12-SA1) was obtained when the Ce-AlS: SA: Na2CO3 was 12:1:1, and obtained the optimal adsorption conditions by Response Surface Method (RSM) with 1.5 mg/L of the dosage, 4 of pH and 50 mg/L of Cphosphate. The maximum adsorption of 20.36 mg P/g was obtained by the Langmuir model at 303 K, which was 2.92 times more than raw sludge. According to the Freundlich and pseudo-second-order kinetic model, the adsorption process is chemisorption; the multi-stage adsorption process is reflected in the intraparticle diffusion and film diffusion models. The main mechanisms combined with the characterization analysis are electrostatic gravity, ligand exchange, and inner-sphere complexation. Meanwhile, Ce-AlS12-SA1 shows good resistance to interference in the coexistence of multiple ions. Therefore, this material can be recognized as a new material with in-depth, diversified and practical needs for resourceful utilization, which is expected to achieve extensive engineering applications in the future.

Enhanced phosphate adsorption studies on several metal-modified aluminum sludge: preparation optimization, adsorption behavior, and mechanistic insight.

To solve the problems such as water eutrophication caused by excess phosphorus, the potential residual value of aluminum sludge was fully exploited and its phosphate adsorption capacity was further improved. In this study, twelve metal-modified aluminum sludge materials were prepared by co-precipitation method. Among them, Ce-WTR, La-WTR, Y-WTR, Zr-WTR, and Zn-WTR showed excellent adsorption capacity for phosphate. The adsorption performance of Ce-WTR on phosphate was twice that of the native sludge. The enhanced adsorption mechanism of metal modification on phosphate was investigated. The characterization results showed that the increase in specific surface area after metal modification was 9.64, 7.5, 7.29, 3, and 1.5 times, respectively. The adsorption of phosphate by WTR and Zn-WTR was in the accordance with Langmuir model, while the others were more following the Freundlich model (R2 > 0.991). The effects of dosage, pH, and anion on phosphate adsorption were investigated. The surface hydroxyl groups and metal (hydrogen) oxides played an important role in the adsorption process. The adsorption mechanism involves physical adsorption, electrostatic attraction, ligand exchange, and hydrogen bonding. This study provides new ideas for the resource utilization of aluminum sludge and theoretical support for preparing novel adsorbents for efficient phosphate removal.