Understanding Sorption of Aqueous Electrolytes in Porous Carbon by NMR Spectroscopy.

Ion adsorption at solid-water interfaces is crucial for many electrochemical processes involving aqueous electrolytes including energy storage, electrochemical separations, and electrocatalysis. However, the impact of the hydronium (H3O+) and hydroxide (OH-) ions on the ion adsorption and surface charge distributions remains poorly understood. Many fundamental studies of supercapacitors focus on non-aqueous electrolytes to avoid addressing the role of functional groups and electrolyte pH in altering ion uptake. Achieving microscopic level characterization of interfacial mixed ion adsorption is particularly challenging due to the complex ion dynamics, disordered structures, and hierarchical porosity of the carbon electrodes. This work addresses these challenges starting with pH measurements to quantify the adsorbed H3O+ concentrations, which reveal the basic nature of the activated carbon YP-50F commonly used in supercapacitors. Solid-state NMR spectroscopy is used to study the uptake of lithium bis(trifluoromethanesulfonyl)-imide (LiTFSI) aqueous electrolyte in the YP-50F carbon across the full pH range. The NMR data analysis highlights the importance of including the fast ion-exchange processes for accurate quantification of the adsorbed ions. Under acidic conditions, more TFSI- ions are adsorbed in the carbon pores than Li+ ions, with charge compensation also occurring via H3O+ adsorption. Under neutral and basic conditions, when the carbon's surface charge is close to zero, the Li+ and TFSI- ions exhibit similar but lower affinities toward the carbon pores. Our experimental approach and evidence of H3O+ uptake in pores provide a methodology to relate the local structure to the function and performance in a wide range of materials for energy applications and beyond.

Bulk fatigue induced by surface reconstruction in layered Ni-rich cathodes for Li-ion batteries.

Ni-rich layered cathode materials are among the most promising candidates for high-energy-density Li-ion batteries, yet their degradation mechanisms are still poorly understood. We report a structure-driven degradation mechanism for NMC811 (LiNi0.8Mn0.1Co0.1O2), in which a proportion of the material exhibits a lowered accessible state of charge at the end of charging after repetitive cycling and becomes fatigued. Operando synchrotron long-duration X-ray diffraction enabled by a laser-thinned coin cell shows the emergence and growth in the concentration of this fatigued phase with cycle number. This degradation is structure driven and is not solely due to kinetic limitations or intergranular cracking: no bulk phase transformations, no increase in Li/Ni antisite mixing and no notable changes in the local structure or Li-ion mobility of the bulk are seen in aged NMCs. Instead, we propose that this degradation stems from the high interfacial lattice strain between the reconstructed surface and the bulk layered structure that develops when the latter is at states of charge above a distinct threshold of approximately 75%. This mechanism is expected to be universal in Ni-rich layered cathodes. Our findings provide fundamental insights into strategies to help mitigate this degradation process.

Operando NMR of NMC811/Graphite Lithium-Ion Batteries: Structure, Dynamics, and Lithium Metal Deposition.

Lithium-ion batteries (LIBs) are of tremendous importance for our society, but their limited lifetime still poses a great challenge. For a better understanding of battery cycling and degradation, operando analytical measurements are invaluable. In this work, we demonstrate that operando 7Li nuclear magnetic resonance (NMR) spectroscopy can be applied to full LIBs. We exemplify this on LiNi0.8Mn0.1Co0.1O2 (NMC811)/graphite cells, which are typical high-energy LIBs. Employing industry-standard electrodes, our operando cells show realistic cycling performance at practical rates, which allows us to conduct experiments at different rates and temperatures and to draw conclusions on the performance of LIBs. The NMR experiments monitor processes in both electrodes individually, including Li-ion mobility and its changes with temperature. Moreover, Li metal deposition on graphite is observed at low temperature, which is an important degradation mechanism in LIBs and a severe safety hazard. Our experiments offer unique insights into this Li metal deposition process under different charging conditions.

Intrinsic Kinetic Limitations in Substituted Lithium-Layered Transition-Metal Oxide Electrodes.

Substituted Li-layered transition-metal oxide (LTMO) electrodes such as LixNiyMnzCo1-y-zO2 (NMC) and LixNiyCo1-y-zAlzO2 (NCA) show reduced first cycle Coulombic efficiency (90-87% under standard cycling conditions) in comparison with the archetypal LixCoO2 (LCO; ∼98% efficiency). Focusing on LixNi0.8Co0.15Al0.05O2 as a model compound, we use operando synchrotron X-ray diffraction (XRD) and nuclear magnetic resonance (NMR) spectroscopy to demonstrate that the apparent first-cycle capacity loss is a kinetic effect linked to limited Li mobility at x > 0.88, with near full capacity recovered during a potentiostatic hold following the galvanostatic charge-discharge cycle. This kinetic capacity loss, unlike many capacity losses in LTMOs, is independent of the cutoff voltage during delithiation and it is a reversible process. The kinetic limitation manifests not only as the kinetic capacity loss during discharge but as a subtle bimodal compositional distribution early in charge and, also, a dramatic increase of the charge-discharge voltage hysteresis at x > 0.88. 7Li NMR measurements indicate that the kinetic limitation reflects limited Li transport at x > 0.86. Electrochemical measurements on a wider range of LTMOs including Lix(Ni,Fe)yCo1-yO2 suggest that 5% substitution is sufficient to induce the kinetic limitation and that the effect is not limited to Ni substitution. We outline how, in addition to a reduction in the number of Li vacancies and shrinkage of the Li-layer size, the intrinsic charge storage mechanism (two-phase vs solid-solution) and localization of charge give rise to additional kinetic barriers in NCA and nonmetallic LTMOs in general.

Structural Fingerprinting of Protein Aggregates by Dynamic Nuclear Polarization-Enhanced Solid-State NMR at Natural Isotopic Abundance.

A pathological hallmark of Huntington's disease (HD) is the formation of neuronal protein deposits containing mutant huntingtin fragments with expanded polyglutamine (polyQ) domains. Prior studies have shown the strengths of solid-state NMR (ssNMR) to probe the atomic structure of such aggregates, but have required in vitro isotopic labeling. Herein, we present an approach for the structural fingerprinting of fibrils through ssNMR at natural isotopic abundance (NA). These methods will enable the spectroscopic fingerprinting of unlabeled (e.g., ex vivo) protein aggregates and the extraction of valuable new long-range 13C-13C distance constraints.

Temperature dependence of cross-effect dynamic nuclear polarization in rotating solids: advantages of elevated temperatures.

Dynamic nuclear polarization exploits electron spin polarization to boost signal-to-noise in magic-angle-spinning (MAS) NMR, creating new opportunities in materials science, structural biology, and metabolomics studies. Since protein NMR spectra recorded under DNP conditions can show improved spectral resolution at 180-200 K compared to 110 K, we investigate the effects of AMUPol and various deuterated TOTAPOL isotopologues on sensitivity and spectral resolution at these temperatures, using proline and reproducibly prepared SH3 domain samples. The TOTAPOL deuteration pattern is optimized for protein DNP MAS NMR, and signal-to-noise per unit time measurements demonstrate the high value of TOTAPOL isotopologues for Protein DNP MAS NMR at 180-200 K. The combined effects of enhancement, depolarization, and proton longitudinal relaxation are surprisingly sample-specific. At 200 K, DNP on SH3 domain standard samples yields a 15-fold increase in signal-to-noise over a sample without radicals. 2D and 3D NCACX/NCOCX spectra were recorded at 200 K within 1 and 13 hours, respectively. Decreasing enhancements with increasing 2H-content at the CH2 sites of the TEMPO rings in CD3-TOTAPOL highlight the importance of protons in a sphere of 4-6 Å around the nitroxyl group, presumably for polarization pickup from electron spins.

A New Tool for NMR Crystallography: Complete (13)C/(15)N Assignment of Organic Molecules at Natural Isotopic Abundance Using DNP-Enhanced Solid-State NMR.

NMR crystallography of organic molecules at natural isotopic abundance (NA) strongly relies on the comparison of assigned experimental and computed NMR chemical shifts. However, a broad applicability of this approach is often hampered by the still limited (1)H resolution and/or difficulties in assigning (13)C and (15)N resonances without the use of structure-based chemical shift calculations. As shown here, such difficulties can be overcome by (13)C-(13)C and for the first time (15)N-(13)C correlation experiments, recorded with the help of dynamic nuclear polarization. We present the complete de novo (13)C and (15)N resonance assignment at NA of a self-assembled 2'-deoxyguanosine derivative presenting two different molecules in the asymmetric crystallographic unit cell. This de novo assignment method is exclusively based on aforementioned correlation spectra and is an important addition to the NMR crystallography approach, rendering firstly (1)H assignment straightforward, and being secondly a prerequisite for distance measurements with solid-state NMR.

Photoswitchable precision glycooligomers and their lectin binding.

The synthesis of photoswitchable glycooligomers is presented by applying solid-phase polymer synthesis and functional building blocks. The obtained glycoligands are monodisperse and present azobenzene moieties as well as sugar ligands at defined positions within the oligomeric backbone and side chains, respectively. We show that the combination of molecular precision together with the photoswitchable properties of the azobenzene unit allows for the photosensitive control of glycoligand binding to protein receptors. These stimuli-sensitive glycoligands promote the understanding of multivalent binding and will be further developed as novel biosensors.

Probing Jahn-Teller Distortions and Antisite Defects in LiNiO2 with 7Li NMR Spectroscopy and Density Functional Theory.

The long- and local-range structure and electronic properties of the high-voltage lithium-ion cathode material for Li-ion batteries, LiNiO2, remain widely debated, as are the degradation phenomena at high states of delithiation, limiting the more widespread use of this material. In particular, the local structural environment and the role of Jahn-Teller distortions are unclear, as are the interplay of distortions and point defects and their influence on cycling behavior. Here, we use ex situ7Li NMR measurements in combination with density functional theory (DFT) calculations to examine Jahn-Teller distortions and antisite defects in LiNiO2. We calculate the 7Li Fermi contact shifts for the Jahn-Teller distorted and undistorted structures, the experimental 7Li room-temperature spectrum being ascribed to an appropriately weighted time average of the rapidly fluctuating structure comprising collinear, zigzag, and undistorted domains. The 7Li NMR spectra are sensitive to the nature and distribution of antisite defects, and in combination with DFT calculations of different configurations, we show that the 7Li resonance at approximately -87 ppm is characteristic of a subset of Li-Ni antisite defects, and more specifically, a Li+ ion in the Ni layer that does not have an associated Ni ion in the Li layer in its 2nd cation coordination shell. Via ex situ7Li MAS NMR, X-ray diffraction, and electrochemical experiments, we identify the 7Li spectral signatures of the different crystallographic phases on delithiation. The results imply fast Li-ion dynamics in the monoclinic phase and indicate that the hexagonal H3 phase near the end of charge is largely devoid of Li.

Graphite Anodes for Li-Ion Batteries: An Electron Paramagnetic Resonance Investigation.

Graphite is the most commercially successful anode material for lithium (Li)-ion batteries: its low cost, low toxicity, and high abundance make it ideally suited for use in batteries for electronic devices, electrified transportation, and grid-based storage. The physical and electrochemical properties of graphite anodes have been thoroughly characterized. However, questions remain regarding their electronic structures and whether the electrons occupy localized states on Li, delocalized states on C, or an admixture of both. In this regard, electron paramagnetic resonance (EPR) spectroscopy is an invaluable tool for characterizing the electronic states generated during electrochemical cycling as it measures the properties of the unpaired electrons in lithiated graphites. In this work, ex situ variable-temperature (10-300 K), variable-frequency (9-441 GHz) EPR was carried out to extract the g tensors and line widths and understand the effect of metallicity on the observed EPR spectra of electrochemically lithiated graphites at four different states of lithiation. We show that the increased resolution offered by EPR at high frequencies (>300 GHz) enables up to three different electron environments of axial symmetry to be observed, revealing heterogeneity within the graphite particles and the presence of hyperfine coupling to Li nuclei. Importantly, our work demonstrates the power of EPR spectroscopy to investigate the local electronic structure of graphite at different lithiation stages, paving the way for this technique as a tool for screening and investigating novel materials for use in Li-ion batteries.

O3 to O1 Phase Transitions in Highly Delithiated NMC811 at Elevated Temperatures.

Nickel-rich layered oxide cathodes such as NMC811 (LixNi0.8Mn0.1Co0.1O2) currently have the highest practical capacities of cathodes used commercially, approaching 200 mAh/g. Lithium is removed from NMC811 via a solid-solution behavior when delithiated to xLi > 0.10, maintaining the same layered (O3 structure) throughout as observed via operando diffraction measurements. Although it is possible to further delithiate NMC811, it is kinetically challenging, and there are significant side reactions between the electrolyte and cathode surface. Here, small format, NMC811-graphite pouch cells were charged to high voltages at elevated temperatures and held for days to access high states of delithiation. Rietveld refinements on high-resolution diffraction data and indexing of selected area electron diffraction patterns, both acquired ex situ, show that NMC811 undergoes a partial and reversible transition from the O3 to the O1 phase under these conditions. The O1 phase fraction depends not only on the concentration of intercalated lithium but also on the hold temperature and hold time, indicating that the phase transition is kinetically controlled. 1H NMR spectroscopy shows that the proton concentration decreases with O1 phase fraction and is not, therefore, likely to be driving the O3-O1 phase transition.

Selective NMR observation of the SEI-metal interface by dynamic nuclear polarisation from lithium metal.

While lithium metal represents the ultimate high-energy-density battery anode material, its use is limited by dendrite formation and associated safety risks, motivating studies of the solid-electrolyte interphase layer that forms on the lithium, which is key in controlling lithium metal deposition. Dynamic nuclear polarisation enhanced NMR can provide important structural information; however, typical exogenous dynamic nuclear polarisation experiments, in which organic radicals are added to the sample, require cryogenic sample cooling and are not selective for the interface between the metal and the solid-electrolyte interphase. Here we instead exploit the conduction electrons of lithium metal to achieve an order of magnitude hyperpolarisation at room temperature. We enhance the 7Li, 1H and 19F NMR spectra of solid-electrolyte interphase species selectively, revealing their chemical nature and spatial distribution. These experiments pave the way for more ambitious room temperature in situ dynamic nuclear polarisation studies of batteries and the selective enhancement of metal-solid interfaces in a wider range of systems.

Natural Isotopic Abundance 13C and 15N Multidimensional Solid-State NMR Enabled by Dynamic Nuclear Polarization.

Dynamic nuclear polarization (DNP) has made feasible solid-state NMR experiments that were previously thought impractical due to sensitivity limitations. One such class of experiments is the structural characterization of organic and biological samples at natural isotopic abundance (NA). Herein, we describe the many advantages of DNP-enabled ssNMR at NA, including the extraction of long-range distance constraints using dipolar recoupling pulse sequences without the deleterious effects of dipolar truncation. In addition to the theoretical underpinnings in the analysis of these types of experiments, numerous applications of DNP-enabled ssNMR at NA are discussed.

Efficient 2D double-quantum solid-state NMR spectroscopy with large spectral widths.

2D double-quantum single-quantum correlation spectra with arbitrary spectral widths can be recorded with SR26 and related supercycled recoupling sequences when applying Supercycle-Timing-Compensation (STiC) phase shifts. This concept widely extends the applicability of supercycled sequences, most importantly for obtaining long-range distance constraints for structure determination with solid-state NMR.

Welcoming natural isotopic abundance in solid-state NMR: probing π-stacking and supramolecular structure of organic nanoassemblies using DNP.

The self-assembly of small organic molecules is an intriguing phenomenon, which provides nanoscale structures for applications in numerous fields from medicine to molecular electronics. Detailed knowledge of their structure, in particular on the supramolecular level, is a prerequisite for the rational design of improved self-assembled systems. In this work, we prove the feasibility of a novel concept of NMR-based 3D structure determination of such assemblies in the solid state. The key point of this concept is the deliberate use of samples that contain 13C at its natural isotopic abundance (NA, 1.1%), while exploiting magic-angle spinning dynamic nuclear polarization (MAS-DNP) to compensate for the reduced sensitivity. Since dipolar truncation effects are suppressed to a large extent in NA samples, unique and highly informative spectra can be recorded which are impossible to obtain on an isotopically labeled system. On the self-assembled cyclic diphenylalanine peptide, we demonstrate the detection of long-range internuclear distances up to ∼7 Å, allowing us to observe π-stacking through 13C-13C correlation spectra, providing a powerful tool for the analysis of one of the most important non-covalent interactions. Furthermore, experimental polarization transfer curves are in remarkable agreement with numerical simulations based on the crystallographic structure, and can be fully rationalized as the superposition of intra- and intermolecular contributions. This new approach to NMR crystallography provides access to rich and precise structural information, opening up a new avenue to de novo crystal structure determination by NMR.

At the very beginning of life on Earth: the thiol-rich peptide (TRP) world hypothesis.

Life developed on Earth probably about 3.8 billion years ago, on a planet that was already largely covered by oceans and where the atmosphere was very humid. The reactions, which may have led to the formation of the first polymers, particularly to the first peptides and nucleic acids, must have been compatible with these conditions. This is the case of the reaction of nitriles with aminothiols, such as cysteine and homocysteine. Since aminonitriles are the probable precursors of amino acids, this condensation reaction has been able to rapidly yield dipeptides, tripeptides, oligomers and even true polymers, each containing thiol functions. These thiol-rich peptides (TRP's) would then have assumed the various catalytic roles that the peptides containing cysteine residues play today. They allowed a rapid bloom of life in the primitive ocean. In this scenario, RNA's are not the first polymers, but have been synthesized, like DNA's, thanks to the catalytic properties of thiols in a mostly TRP world. In this world, due to its ability to form a thiolactone, homocysteine may have played the leading role in enabling the previously formed oligomers to be stappled together, thus accelerating the formation of long peptide chains.