Ambient Pressure Drying of Freeze-Cast Ceramics from Aqueous Suspension.

Freeze-casting has been wildly exploited to construct porous ceramics but usually requires costly and demanding freeze-drying (high vacuum, size limit, and supercooled chamber), which can be avoided by the ambient pressure drying (APD) technique. However, applying APD to freeze-cast ceramic based on an aqueous suspension is still challenging due to inert surface chemistry. Herein, a modified APD strategy is developed to improve the drying process of freeze-cast ceramics by exploiting the simultaneous ice etching, ionic cross-linking, and solvent exchange under mild conditions (-10-0 °C, ambient pressure). This versatile strategy is applicable to various ceramic species, metal ions, and freezing techniques. The incorporated metal ions not only enhance liquid-phase sintering, producing ceramics with higher density and mechanical properties than freeze-cast counterparts, but also render customizable coloration and antibacterial property. The cost-/time-efficient APD is promising for mass production and even successive production of large-size freeze-cast ceramics that exceed the size of commercial freeze-dryers.

Cytopathological analysis of bronchoalveolar lavage fluid in patients with and without HIV infection.

BACKGROUND: Human immunodeficiency virus/acquired immunodeficiency syndrome (HIV/AIDS) infection can lead to a broad spectrum of lung diseases, including infectious diseases and tumors. Recently, with the wide application of bronchoscopes and cytopathology of bronchoalveolar lavage fluid (BALF), the diagnostic efficiency of lung diseases has improved. The present study focuses on analyzing the cytopathologic characteristics of BALF in the diagnosis of HIV/AIDS-related lung disease and comparing the lung disease spectrum between HIV and HIV-uninfected patients. METHODS: BALF specimens were collected from 2211 patients. Using ThinPrep liquid-based technology, the cytologic smears were prepared by staining with Hematoxylin and Eosin (HE), Gomori's methenamine silver (GMS), and Periodic Acid Schiff (PAS), acid-fast and immunocytochemical (ICC) staining. Real-time PCR was used to detect cytomegalovirus (CMV) and Mycobacterium tuberculosis (M. tuberculosis) in the remaining BALF. PCR-reverse dot hybridization was used for mycobacterial species identification. RESULTS: From the 2211 BALF specimens, 1768 (79.96%) were specimens from HIV-infected patients, and 443 (20.04%) were speciments from HIV-uninfected patients. The HIV-infected patients with a median age of 38.5 ± 11.3 years were markedly younger than the HIV-uninfected patients (52.9 ± 14.9 years) (p < 0.01). We found that 1635 (92.5%) HIV-infected patients were males, showing a prominently higher proportion than those without HIV infection (71.1%) (p < 0.01). Meanwhile, 1045 specific lesions were found in 1768 HIV-infected patients (59.1%), including 1034 cases of infectious diseases and 11 neoplastic lesions, also exhibiting a distinctly higher proportion compared to the HIV-uninfected patients (12.2%) (p < 0.001). For the HIV-infected group, a distinctly higher proportion of single infection lesions (724/1768, 41%) was noted than the HIV-uninfected group (14/443, 3.2%) (p < 0.001). Among single infection lesions, the most common was Cytomegalovirus(CMV) infection (20.9%) for the HIV-infected group, followed by Pneumocystis jiroveci(PJ) (13.0%), Fungal (3.5%), and Mycobacterial infections (3.4%), of which M. tuberculosis infection accounted for 3.1%. Double infections (300/1768, 17.0%) and Triple infections (10/1768, 0.6%) were found only among the patients with HIV. The malignancies among HIV-infected patients included adenocarcinomas (0.22%), small cell carcinomas (0.2%), squamous cell carcinomas (0.1%), and diffuse large B-cell lymphoma (0.1%). HIV-infected patients exhibited a significantly lower incidence of neoplastic lesions (0.6% vs. 9.0%) than the HIV-uninfected patients (p < 0.001). CONCLUSIONS: There was a significant difference in the spectrum of lung diseases between HIV-infected and non-infected patients diagnosed by BALF cytopathology.

Proper motility enhances rumen fermentation and microbial protein synthesis with decreased saturation of dissolved gases in rumen simulation technique.

The physiological function of the reticulorumen plays an essential role in ruminant nutrition, and detailed knowledge of rumen motility can further advance understanding of ruminant nutrition and physiology. Rumen motility was simulated by setting different stirrer rotation speeds in a rumen simulation technique (RUSITEC) system. The aim of this study was to investigate the effects of rotation speeds on rumen fermentation, saturation factor of dissolved gases, hydrogen (H2) and methane (CH4) emissions, microbial protein synthesis, and selected microbial population using RUSITEC. The experiment was performed according to a balanced 3 × 3 Latin square design, and each period included 7 d for adaptation and 3 d for sampling. Three motility treatments included 5, 15, and 25 rpm rotation speeds. Daily total gas and H2 and CH4 emissions had quadratic responses to the increasing rotation speed and were highest at 15 rpm. Quadratic and linear responses (highest at 5 rpm) to increasing rotation speed were observed for saturation factors of H2 and CH4, liquid-dissolved H2 and CH4 concentrations, and headspace concentration of H2 in the gas phase, whereas increasing rotation speed linearly decreased saturation factors of CO2 and liquid-dissolved CO2 concentration. Quadratic and linear responses to increasing rotation speed were observed for molar percentages of acetate, ammonia, and microbial protein concentration, whereas increasing rotation speed quadratically increased pH and decreased total volatile fatty acid concentration and acetate-to-propionate ratio. The 15-rpm rotation speed had the highest values of total volatile fatty acids, acetate molar percentage, and microbial protein concentration. Quadratic and linear responses to increasing rotation speed were observed for copy numbers of solid-associated fungi and fluid-associated bacteria, fungi, and protozoa, while increasing rotation speed linearly increased copy numbers of solid-associated protozoa. Rotation at 15 rpm increased populations of fungi and protozoa in the solid rumen contents and the population of bacteria and fungi in the liquid rumen contents. In summary, this study provides insights on the biofunction of proper rumen motility (i.e., at a rotation speed of 15 rpm), such as improving feed fermentation, increasing gas emissions with decreased dissolved gas concentrations and saturation factors, and promoting microbial colonization and microbial protein synthesis, although further increase in rotation speed (i.e., to 25 rpm) decreases feed fermentation and microbial protein synthesis.

Association of fibre degradation with ruminal dissolved hydrogen in growing beef bulls fed with two types of forages.

The present study investigated the association between fibre degradation and the concentration of dissolved molecular hydrogen (H2) in the rumen. Napier grass (NG) silage and corn stover (CS) silage were compared as forages with contrasting structures and degradation patterns. In the first experiment, CS silage had greater 48-h DM, neutral-detergent fibre (NDF) and acid-detergent fibre degradation, and total gas and methane (CH4) volumes, and lower 48-h H2 volume than NG silage in 48-h in vitro incubations. In the second experiment, twenty-four growing beef bulls were fed diets including 55 % (DM basis) NG or CS silages. Bulls fed the CS diet had greater DM intake (DMI), average daily gain, total-tract digestibility of OM and NDF, ruminal dissolved methane (dCH4) concentration and gene copies of protozoa, methanogens, Ruminococcus albus and R. flavefaciens, and had lower ruminal dH2 concentration, and molar proportions of valerate and isovalerate, in comparison with those fed the NG diet. There was a negative correlation between dH2 concentration and NDF digestibility in bulls fed the CS diet, and a lack of relationship between dH2 concentration and NDF digestibility with the NG diet. In summary, the fibre of CS silage was more easily degraded by rumen microorganisms than that of NG silage. Increased dCH4 concentration with the CS diet presumably led to the decreased ruminal dH2 concentration, which may be helpful for fibre degradation and growth of fibrolytic micro-organisms in the rumen.

Analysis of the causes of cervical lymphadenopathy using fine-needle aspiration cytology combining cell block in Chinese patients with and without HIV infection.

BACKGROUND: Cervical lymphadenopathy refers to a frequently observed clinical presentation in numerous pathological conditions. A wide spectrum of diseases can cause cervical lymphadenopathy, irrespective of the fact that the patients are infected with HIV or not. The present study focuses on validating whether the causes of cervical lymphadenopathy differ significantly in HIV and non-HIV patients by using fine-needle aspiration cytology (FNAC) combining cell block. METHODS: A total of 589 patients with cervical lymphadenopathy were recruited in the FNA clinic. The samples were obtained by an auto-vacuumed syringe that benefited the sampling more materials. The cytological smears were prepared by Hematoxylin and Eosin (HE), Periodic Acid Schiff (PAS), Gomori's methenamine silver (GMS) and acid-fast staining. Cell blocks were made if required, and immunohistochemistry stain was performed on the cell block section. RESULTS: The study found 453 (76.9%) patients with HIV and 136 (23.1%) patients without HIV infection. The average age of HIV-infected patients was 34.8 ± 10.2 years, which was significantly lower than that of non-HIV-infected patients (42.9 ± 18.1 years) (p < 0.01). Of all patients infected with HIV, 390 (86.1%) were males. This proportion was significantly higher than that of non-HIV-infected patients [65/136 (47.8%)] (p < 0.01). The major causes of cervical lymphadenopathy in HIV positive patients were mycobacterial infection (38.4%), reactive hyperplasia (28.9%), non-specific inflammation (19.9%), and malignant lesions (4.2%). In contrast, the most common causes in HIV negative patients were reactive hyperplasia (37.5%), malignancy (20.6%), non-specific inflammation (19.1%) and mycobacterial infection (12.5%). Opportunistic infections such as non-tuberculous mycobacteria (4.2%), cryptococcosis (1.5%), Talaromyces marneffei (1.5%) and other fungi (0.4%) were found only in HIV-infected individuals. Non-Hodgkin's lymphoma (2.4%) was the most common malignant lesion in patients with HIV infection, followed by Kaposi's sarcoma (0.9%) and metastatic squamous cell carcinomas (0.7%). However, the most common malignancy in non-HIV-infected patients was metastatic carcinomas (14%) including small cell carcinomas, adenocarcinomas, squamous cell carcinomas and hepatocellular carcinoma, which were noticeably greater than the HIV patients (p < 0.01). CONCLUSIONS: There were significantly different causes of cervical lymphadenopathy in HIV infected and non-HIV infected patients. FNAC was a useful diagnostic method for differential diagnosis of cervical lymphadenopathy.

Liquid hot water treatment of rice straw enhances anaerobic degradation and inhibits methane production during in vitro ruminal fermentation.

Liquid hot water (LHW) treatment can be used to disrupt the fiber structure of rice straw. This in vitro ruminal batch culture study investigated the effect of LHW treatment on feed degradation, methane (CH4) production, and microbial populations. Rice straw was treated by LHW, and in vitro ruminal fermentation was performed using an automatic system with 72 h of incubation. Scanning electron microscopy showed that LHW treatment disrupted the physical structure of rice straw. Liquid hot water treatment decreased neutral detergent fiber and hemicellulose contents of the rice straw and increased neutral detergent solubles, water-soluble carbohydrates, and arabinose contents. Liquid hot water treatment increased dry matter degradation and volatile fatty acid concentration and decreased the acetate:propionate ratio, CH4 production, hydrogen accumulation, neutral detergent fiber degradation, and populations of protozoa, fungi, and cellulolytic bacteria. In summary, LHW treatment disrupted the cellulose-hemicellulose-lignin structure matrix of rice straw, leading to increased substrate degradability and decreased CH4 production. Therefore, the LHW treatment is a potential strategy to improve the nutritive value of forage such as rice straw and decrease the CH4 emissions in ruminants.

Molecular hydrogen produced by elemental magnesium inhibits rumen fermentation and enhances methanogenesis in dairy cows.

Hydrogen is a key metabolite that connects microbial fermentation and methanogenesis in the rumen. This study was to investigate the effects of elevated H2 produced by elemental Mg on rumen fermentation and methanogenesis in dairy cows. Four nonlactating Chinese Holstein dairy cows were employed for this experiment in a replicated crossover design. The 2 dietary treatments included a basal diet supplemented with Mg(OH)2 (14.5 g/kg of feed dry matter) or elemental Mg (6.00 g/kg of feed dry matter). When compared with Mg(OH)2 treatment, cows fed diet with elemental Mg had similar rumen Mg2+ concentration, but higher rumen dissolved H2 and methane concentrations at 2.5 h after morning feeding. Also, elemental Mg supplementation decreased feed digestibility, rumen volatile fatty acid concentration, and relative abundance of group Ruminococcaceae_UCG-014, genus Bifidobacterium, and group Mollicutes_RF9, increased acetate to propionate ratio, succinate concentration, and abundance of family Christensenellaceae. Elemental Mg supplementation increased enteric CH4 emission, altered methanogen community with increased abundance of order Methanomassiliicoccales, 16S ribosomal RNA gene copies of methanogens, and order Methanobacteriales. In summary, the pulse of elevated dissolved H2 after feeding produced by elemental Mg inhibited rumen fermentation and feed digestibility by decreasing the abundance of carbohydrate-degrading bacteria, promoted H2 incorporation into succinate by increasing family Christensenellaceae and genus Bacteroidales_BS11, and increased H2 utilization for methanogenesis by favoring growth of methanogens.

Technical note: Evaluation of interval between measurements and calculation method for the quantification of enteric methane emissions measured by respiration chamber.

Respiration chambers share one analyzer working in parallel, and methane (CH4) concentrations have to be measured at certain intervals. The maximum and minimum values in the kinetics of CH4 emissions can be missed during the interval between measurements, which may influence the quantification of CH4 emissions. Chambers must be opened for morning feeding and cleaning, which causes a loss of CH4 data. Calculation methods are needed to estimate the lost CH4 emission data, which may influence the estimated amount of daily CH4 emissions. In this study, we measured the CH4 emissions of 10 growing Chinese Holstein dairy heifers in respiration chambers. Methane concentrations were measured every 0.5 min to obtain the 23-h kinetics of CH4 emissions, which were further selected at different intervals between measurements (i.e., 5, 30, 60, 120, 180, and 240 min) to evaluate the effects of interval on quantification of CH4 emissions. The missing 1-h kinetics of CH4 emissions before feeding were not measured, and 2 calculation methods were used to estimate the missing 1-h kinetics of CH4 emissions: mean value of measuring period (the mean method) and the nearest value of measurement just before chamber opening (the nearest method). The results showed that the rates of CH4 emission from 10 heifers varied from 4.56 to 11.42 g/h. The increment of intervals decreased maximum rate of CH4 emission and increased minimum rate of CH4 emission. Interval caused less than 5% of the difference in measuring CH4 emissions. Although the mean method had greater estimated daily CH4 emission than the nearest method, the difference was within 3%. The interval between measurements (≤3 h) and calculation method had little influence on enteric CH4 emission measurements.

Effects of rumen cannulation on dissolved gases and methanogen community in dairy cows.

Rumen cannulation is a widely employed technique in ruminant nutrition research. However, the gap between skin and rumen cannula can cause leakage of fermentation gases and influx of atmospheric air, which may adversely affect the anaerobic environment in the rumen. The present study was designed to investigate the effects of rumen cannulation on headspace gases, dissolved gases, fermentation end products, and methanogen community in the rumen of dairy cows. Eight Holstein cows were used in the experiment. Four cows were surgically fitted with rumen cannulas, whereas the other 4 intact cows were used as control. Rumen cannulation decreased gaseous hydrogen and methane concentrations, dissolved carbon dioxide concentration, and relative abundances of Methanosphaera, and increased the saturation factor of dissolved hydrogen and dissolved methane, dissolved methane concentration, volatile fatty acid concentration, 16S ribosomal RNA gene copies of methanogens, and Simpson index of methanogen community. In summary, rumen cannulation causes a reduction in headspace gaseous hydrogen and gaseous methane, which may not decrease dissolved gas concentrations due to an increase in saturation factors. Furthermore, rumen cannulation alters methanogen community with increased methanogen population and decreased relative abundances of Methanosphaera.

Fire-Retardant and Thermally Insulating Phenolic-Silica Aerogels.

Energy efficient buildings require materials with a low thermal conductivity and a high fire resistance. Traditional organic insulation materials are limited by their poor fire resistance and inorganic insulation materials are either brittle or display a high thermal conductivity. Herein we report a mechanically resilient organic/inorganic composite aerogel with a thermal conductivity significantly lower than expanded polystyrene and excellent fire resistance. Co-polymerization and nanoscale phase separation of the phenol-formaldehyde-resin (PFR) and silica generate a binary network with domain sizes below 20 nm. The PFR/SiO2 aerogel can resist a high-temperature flame without disintegration and prevents the temperature on the non-exposed side from increasing above the temperature critical for the collapse of reinforced concrete structures.

Layered Crystal Structure, Color-Tunable Photoluminescence, and Excellent Thermal Stability of MgIn2P4O14 Phosphate-Based Phosphors.

Single-component white phosphors stand a good chance to serve in the next-generation high-power white light-emitting diodes. Because of low thermal stability and containing lanthanide ions with reduced valence state, most of reported phosphors usually suffer unstable color of lighting for practical packaging and comparably complex synthetic processes. In this work, we present a type of novel color-tunable blue-white-yellow-emitting MgIn2P4O14:Tm3+/Dy3+ phosphor with high thermal stability, which can be easily fabricated in air. Under UV excitation, the MgIn2P4O14:Tm0.02Dy0.03 white phosphor exhibits negligible thermal-quenching behavior, with a 99.5% intensity retention at 150 °C, relative to its initial value at room temperature. The phosphor host MgIn2P4O14 was synthesized and reported for the first time. MgIn2P4O14 crystallizes in the space group of C2/c (No. 15) with a novel layered structure built of alternate anionic and cationic layers. Its disordering structure, with Mg and In atoms co-occupying the same site, is believed to facilitate the energy transfer between rare-earth ions and benefit by sustaining the luminescence with increasing temperature. The measured absolute quantum yields of MgIn2P4O14:Dy0.04, MgIn2P4O14:Tm0.01Dy0.04, and MgIn2P4O14:Tm0.02Dy0.03 phosphors under the excitation of 351 nm ultraviolet radiation are 70.50%, 53.24%, and 52.31%, respectively. Present work indicates that the novel layered MgIn2P4O14 is a promising candidate as a single-component white phosphor host with an excellent thermal stability for near-UV-excited white-light-emitting diodes (wLEDs).

Polymerization under Hypersaline Conditions: A Robust Route to Phenolic Polymer-Derived Carbon Aerogels.

Polymer-derived carbon aerogels can be obtained by direct polymerization of monomers under hypersaline conditions using inorganic salts. This allows for significantly increased mechanical robustness and avoiding special drying processes. This concept was realized by conducting the polymerization of phenol-formaldehyde (PF) in the presence of ZnCl2 salt. Afterwards, the simultaneous carbonization and foaming process conveniently converts the PF monolith into a foam-like carbon aerogel. ZnCl2 plays a key role, serving as dehydration agent, foaming agent, and porogen. The carbon aerogels thus obtained are of very low density (25 mg cm-3 ), high specific surface area (1340 m2 g-1 ), and have a large micro- and mesopore volume (0.75 cm3 g-1 ). The carbon aerogels show very promising potential in the separation/extraction of organic pollutants and for energy storage.

[Treatment of sixty-one patients with coronary slow flow phenomenon by yiqi huoxue recipe combined Western drugs: a clinical research].

OBJECTIVE: To observe the clinical efficacy of treating patients with coronary slow flow phenomenon by Yiqi Huoxue Recipe (YHR) combined Western drugs, thus providing clinical evidence for further studies. METHODS: Totally 61 patients with coronary slow flow phenomenon were randomly assigned to the treatment group (31 cases) and the control group (30 cases). Patients in the control group were treated with basic treatment of Western medicine, while those in the treatment group were treated with basic treatment of Western medicine and YHR. The therapeutic course for all was two months. Clinical symptoms were observed, and electrocardiogram examinations taken, and left ventricular ejection fraction (LVEF) were evaluated before treatment and at two months after treatment. RESULTS: Patients' clinical symptoms and electrocardiogram examinations were significantly improved in the treatment group. Its effective rate of improved symptoms was 90.32% in the treatment group, superior to that in the control group (76.67%, P < 0.05). The effective rate of electrocardiogram examinations was 87.10% in the treatment group, superior to that in the control group (73.33%, P < 0.05). But there was no statistical difference in LVEF between the two groups (P > 0.05). CONCLUSION: YHR combined Western drugs could improve clinical symptoms and electrocardiographic ischemia in patients with coronary slow flow phenomenon.

[Generation of six genotypes of infectious HCV pseudo-particles and detection of neutralizing antibodies in HCV patients].

OBJECTIVE: To generate hepatitis C virus pseudo-particles (HCVpp) containing the complete E1-E2 envelope glycoprotein, in order to establish a HCVpp database covering the six major genotypes of HCV (1b, 2a, 3b, 4, 5, and 6) and to develop a simple and effective method for detection of neutralizing antibodies in HCV patients. METHODS: HCVpp were generated for the six genotypes by co-transfecting 293T cells with a plasmid expressing the respective E1-E2 (p HR, CMVA 8.2 construct) and a MLV-GFP plasmid. Titration of each HCVpp was carried out by p24 ELISA. Infectivity of each HCVpp was assessed by mixing the harvested supernatant of producer cells with sera from HCV patients, adding the mixture to Huh-7 cells, and detecting the subsequent titers of neutralizing antibodies against HCVpp. RESULTS: All six types of HCVpp were able to infect Huh-7 cells in vitro. For healthy HCV carriers, only two genotypes of HCVpp (1b and 2a) produced neutralizing antibody titers more than 1:40. For cured HCV patients, only the 1b genotype produced neutralizing antibody titers more than 1:40. One patient showed titer of 1:200 for genotype 4. A healthy spouse of a chronic hepatitis C patient showed titers more than 1:40 for four genotypes of HCVpp (3a, 4, 5, 6). CONCLUSION: We generated six different genotypes of HCVpp successfully, established the in vitro neutralizing antibody detection method, and provided an effective model for screening antiviral drugs.

Superflexible Artificial Soft Wood.

Soft woods have attracted enormous interest due to their anisotropic cellular microstructure and unique flexibility. The conventional wood-like materials are usually subject to the conflict between the superflexibility and robustness. Inspired by the synergistic compositions of soft suberin and rigid lignin of cork wood which has good flexibility and mechanical robustness, an artificial soft wood is reported by freeze-casting the soft-in-rigid (rubber-in-resin) emulsions, where the carboxy nitrile rubber confers softness and rigid melamine resin provides stiffness. The subsequent thermal curing induces micro-scale phase inversion and leads to a continuous soft phase strengthened by interspersed rigid ingredients. The unique configuration ensures crack resistance, structural robustness and superb flexibility, including wide-angle bending, twisting, and stretching abilities in various directions, as well as excellent fatigue resistance and high strength, overwhelming the natural soft wood and most wood-inspired materials. This superflexible artificial soft wood represents a promising substrate for bending-insensitive stress sensors.

Cytomegalovirus cell tropism and clinicopathological characteristics in gastrointestinal tract of patients with HIV/AIDS.

BACKGROUND: Cytomegalovirus (CMV) has been recognized as one of the frequently occurring opportunistic infections (OIs) reported in the patients having human immunodeficiency virus/acquired immunodeficiency syndrome (HIV/AIDS). In addition, it has been identified as the factor leading to gastrointestinal (GI) tract disorder among HIV/AIDS population. CMV exhibits broad cell tropism in different organs. This study evaluated the CMV cell tropism and clinicopathological characteristics of CMV infection in the different GI regions in HIV/AIDS cases. METHODS: Using nucleic acid in situ hybridization (ISH), CMV was detected in the gastrointestinal mucosal biopsy samples. The paraffin-embedded samples were stained with hematoxylin and eosin (HE) and immunohistochemistry (IHC), respectively. RESULTS: A total of 32 HIV/AIDS patients were enrolled in this study. Fourteen of these patients underwent gastroscopy, while the remaining eighteen received colonoscopy. CMV-infected cells were observed at 46 GI sites. Among them, the colon was the region with the highest susceptibility to GI CMV infection (n = 12, 26.1%). The CMV giant cell inclusion bodies were detected in epithelial cells and mesenchymal cells, including histiocytes, smooth muscle cells, fibroblasts, and endothelial cells. In the duodenum, there were markedly more positive epithelial cells than mesenchymal cells (p = 0.033). In contrast, in the esophagus (p = 0.030), cardia (p = 0.003), rectum (p = 0.019), colon (p < 0.001), and cecum (p < 0.001), there were notably less positive epithelial cells than mesenchymal cells. The expression levels of PDGFRα and Nrp2 in the mesenchymal cells were higher than the epithelial cells in cardia, cecum, colon, sigmoid, and rectum, especially in the areas with ulcers. However, Nrp2 in the epithelial cells was higher than that in the duodenum. Moreover, the positive CMV DNA in peripheral blood was related to the CMV-positive cell count, as well as the ulceration in GI tract (p = 0.035 and 0.036, respectively). CONCLUSIONS: The colon has been identified as the GI site with the highest susceptibility to CMV infection. There are different CMV-infected cells in the different sites of the GI that relate to the expression level of PDGFRα and Nrp2. CMV DNA positive in the blood is related to the positive CMV cell count, as well as ulceration in the GI tract.

Dietary selection of metabolically distinct microorganisms drives hydrogen metabolism in ruminants.

Ruminants are important for global food security but emit the greenhouse gas methane. Rumen microorganisms break down complex carbohydrates to produce volatile fatty acids and molecular hydrogen. This hydrogen is mainly converted into methane by archaea, but can also be used by hydrogenotrophic acetogenic and respiratory bacteria to produce useful metabolites. A better mechanistic understanding is needed on how dietary carbohydrates influence hydrogen metabolism and methanogenesis. We profiled the composition, metabolic pathways, and activities of rumen microbiota in 24 beef cattle adapted to either fiber-rich or starch-rich diets. The fiber-rich diet selected for fibrolytic bacteria and methanogens resulting in increased fiber utilization, while the starch-rich diet selected for amylolytic bacteria and lactate utilizers, allowing the maintenance of a healthy rumen and decreasing methane production (p < 0.05). Furthermore, the fiber-rich diet enriched for hydrogenotrophic methanogens and acetogens leading to increased electron-bifurcating [FeFe]-hydrogenases, methanogenic [NiFe]- and [Fe]-hydrogenases and acetyl-CoA synthase, with lower dissolved hydrogen (42%, p < 0.001). In contrast, the starch-rich diet enriched for respiratory hydrogenotrophs with greater hydrogen-producing group B [FeFe]-hydrogenases and respiratory group 1d [NiFe]-hydrogenases. Parallel in vitro experiments showed that the fiber-rich selected microbiome enhanced acetate and butyrate production while decreasing methane production (p < 0.05), suggesting that the enriched hydrogenotrophic acetogens converted some hydrogen that would otherwise be used by methanogenesis. These insights into hydrogen metabolism and methanogenesis improve understanding of energy harvesting strategies, healthy rumen maintenance, and methane mitigation in ruminants.

[Effects of Fertilization Strategies on the Cadmium Resistance of Paddy Soil Microorganisms].

Cadmium (Cd) is one of the commonly found heavy metal contaminants in soil and has a toxic effect on plants and humans. Understanding the Cd resistance of soil microorganisms under different fertilization regimes can provide a theoretical basis for controlling heavy metal pollution by organic fertilizers. In order to investigate the effects of inorganic and organic fertilizers on the Cd resistance level of soil microorganisms, paddy soil samples were taken in Changzhou, Shanggao, and Fuzhou. A functional gene array (GeoChip 5.0) was used to investigate the distribution of microbial Cd resistance genes. The results indicated that the content of available Cd in soil with organic fertilizer[(1.08±0.70) mg·kg-1] was significantly lower than that in soils with inorganic fertilizer[(3.75±1.22) mg·kg-1](P<0.05). A total of 639 Cd resistance genes were detected. The abundance of microbial Cd resistance gene in soil with organic fertilizer was higher than that of inorganic soil. The content of available Cd, moisture content, pH, and ammonium nitrogen were important environmental factors affecting the distribution of Cd resistant microorganisms. Analysis of the molecular ecological network of Cd resistant microorganisms showed that pH, moisture content, and the effective state of the Cd content were the main factors affecting the potential interaction of functional microorganisms with inorganic fertilizer, and the main factors were total potassium and moisture content with organic fertilizer. Compared with inorganic fertilizers, the application of organic fertilizers can improve the Cd resistance level of microorganisms in soil and promote positive relationships among Cd resistant soil microorganisms.

In vitro Inoculation of Fresh or Frozen Rumen Fluid Distinguishes Contrasting Microbial Communities and Fermentation Induced by Increasing Forage to Concentrate Ratio.

In vitro rumen batch culture is a technology to simulate rumen fermentation by inoculating microorganisms from rumen fluids. Although inocula (INO) are commonly derived from fresh rumen fluids, frozen rumen fluids are also employed for the advantages of storing, transporting, and preserving rumen microorganisms. The effects of frozen INO on microbial fermentation and community may be interfered with by substrate type, which has not been reported. This study was designed to test whether rumen fluid treatments (i.e., fresh and frozen) could interact with incubated substrates. A complete block design with fractional arrangement treatment was used to investigate the effects of INO (fresh or frozen rumen fluids) and concentrate-to-forage ratios (C/F, 1:4 or 1:1) on rumen fermentation and microbial community. The effects of increasing C/F were typical, including increased dry matter (DM) degradation and total volatile fatty acids (VFA) concentration (P < 0.001), and decreased acetate to propionate ratio (P = 0.01) and bacterial diversity of richness and evenness (P ≤ 0.005) with especially higher fermentative bacteria such as genus Rikenellaceae_RC, F082, Prevotella, Bacteroidales_BS11, Muribaculaceaege, and Christensenellaceae_R-7 (P ≤ 0.04). Although frozen INO decreased (P < 0.001) DM degradation and altered rumen fermentation with lower (P ≤ 0.01) acetate to propionate ratio and molar proportion of butyrate than fresh INO, typical effects of C/F were independent of INO, as indicated by insignificant INO × C/F interaction on substrate degradation, VFA profile and bacterial community (P ≥ 0.20). In summary, the effect of C/F on fermentation and bacterial diversity is not interfered with by INO type, and frozen INO can be used to distinguish the effect of starch content.

Emerging Bioinspired Artificial Woods.

As an abundant natural resource, wood has gained great attention for thousands of years, spanning from the primitive construction materials to the modern high-added-value engineering materials. The unique delicate microstructures and the wonderful properties (e.g., low-density, high strength and stiffness, good toughness, and environmental sustainability) have made wood a natural source of inspiration that guides researchers to invent various wood-inspired materials. Herein, as an emerging material system, bioinspired artificial wood, with similar cellular structures and comparable mechanical properties, is discussed in the view of the design concept, fabrication strategy, properties, and possible applications. The present challenges and further research opportunities are also presented for artificial woods to thrive. To achieve the final eco-friendly artificial wood, more endeavors should be made in biomaterials and biodegradable or recyclable engineering of polymers to gain high mechanical properties and environmental sustainability simultaneously.