Dithiophosphoric Acids for Polymer Functionalization.

Dithiophosphoric acids (DTPAs) are an intriguing class of compounds that are sourced from elemental sulfur and white phosphorus and are prepared from the reaction of phosphorus pentasulfide with alcohols. The electrophilic addition of DTPAs to alkenes and unsaturated olefinic substrates is a known reaction, but has not been applied to polymer synthesis and polymer functionalization. We report on the synthesis and application of DTPAs for the functionalization of challenging poly-enes, namely polyisoprene (PI) and polynorbornene (pNB) prepared by ring-opening metathesis polymerization (ROMP). The high heteroatom content within DTPA moieties impart intriguing bulk properties to poly-ene materials after direct electrophilic addition reactions to the polymer backbone introducing DTPAs as side chain groups. The resulting materials possess both enhanced optical and flame retardant properties vs the poly-ene starting materials. Finally, we demonstrate the ability to prepare crosslinked polydiene films with di-functional DTPAs, where the crosslinking density and thermomechanical properties can be directly tuned by DTPA feed ratios.

Infrared Fingerprint Engineering: A Molecular-Design Approach to Long-Wave Infrared Transparency with Polymeric Materials.

Optical technologies in the long-wave infrared (LWIR) spectrum (7-14 µm) offer important advantages for high-resolution thermal imaging in near or complete darkness. The use of polymeric transmissive materials for IR imaging offers numerous cost and processing advantages but suffers from inferior optical properties in the LWIR spectrum. A major challenge in the design of LWIR-transparent organic materials is that nearly all organic molecules absorb in this spectral window which lies within the so-called IR-fingerprint region. We report on a new molecular-design approach to prepare high refractive index polymers with enhanced LWIR transparency. Computational methods were used to accelerate the design of novel molecules and polymers. Using this approach, we have prepared chalcogenide hybrid inorganic/organic polymers (CHIPs) with enhanced LWIR transparency and thermomechanical properties via inverse vulcanization of elemental sulfur with new organic co-monomers.

Unraveling the rheology of inverse vulcanized polymers.

Multiple relaxation times are used to capture the numerous stress relaxation modes found in bulk polymer melts. Herein, inverse vulcanization is used to synthesize high sulfur content (≥50 wt%) polymers that only need a single relaxation time to describe their stress relaxation. The S-S bonds in these organopolysulfides undergo dissociative bond exchange when exposed to elevated temperatures, making the bond exchange dominate the stress relaxation. Through the introduction of a dimeric norbornadiene crosslinker that improves thermomechanical properties, we show that it is possible for the Maxwell model of viscoelasticity to describe both dissociative covalent adaptable networks and living polymers, which is one of the few experimental realizations of a Maxwellian material. Rheological master curves utilizing time-temperature superposition were constructed using relaxation times as nonarbitrary horizontal shift factors. Despite advances in inverse vulcanization, this is the first complete characterization of the rheological properties of this class of unique polymeric material.

High-strength, healable, supramolecular polymer nanocomposites.

A supramolecular polymer blend, formed via π-π interactions between a π-electron rich pyrenyl end-capped oligomer and a chain-folding oligomer containing pairs of π-electron poor naphthalene-diimide (NDI) units, has been reinforced with cellulose nanocrystals (CNCs) to afford a healable nanocomposite material. Nanocomposites with varying weight percentage of CNCs (from 1.25 to 20.0 wt %) within the healable supramolecular polymeric matrix have been prepared via solvent casting followed by compression molding, and their mechanical properties and healing behavior have been evaluated. It is found that homogeneously dispersed films can be formed with CNCs at less than 10 wt %. Above 10 wt % CNC heterogeneous nanocomposites were obtained. All the nanocomposites formed could be rehealed upon exposure to elevated temperatures although, for the homogeneous films, it was found that the healing rate was reduced with increasing CNC content. The best combination of healing efficiency and mechanical properties was obtained with the 7.5 wt % CNC nanocomposite which exhibited a tensile modulus enhanced by as much as a factor of 20 over the matrix material alone and could be fully rehealed at 85 °C within 30 min. Thus it is demonstrated that supramolecular nanocomposites can afford greatly enhanced mechanical properties relative to the unreinforced polymer, while still allowing efficient thermal healing.

Injectable solid peptide hydrogel as a cell carrier: effects of shear flow on hydrogels and cell payload.

ß-hairpin peptide-based hydrogels are a class of injectable solid hydrogels that can deliver encapsulated cells or molecular therapies to a target site via syringe or catheter injection as a carrier material. These physical hydrogels can shear-thin and consequently flow as a low-viscosity material under a sufficient shear stress but immediately recover back into a solid upon removal of the stress, allowing them to be injected as preformed gel solids. Hydrogel behavior during flow was studied in a cylindrical capillary geometry that mimicked the actual situation of injection through a syringe needle in order to quantify effects of shear-thin injection delivery on hydrogel flow behavior and encapsulated cell payloads. It was observed that all ß-hairpin peptide hydrogels investigated displayed a promising flow profile for injectable cell delivery: a central wide plug flow region where gel material and cell payloads experienced little or no shear rate, and a narrow shear zone close to the capillary wall where gel and cells were subject to shear deformation. The width of the plug flow region was found to be weakly dependent on hydrogel rigidity and flow rate. Live-dead assays were performed on encapsulated MG63 cells 3 h after injection flow and revealed that shear-thin delivery through the capillary had little impact on cell viability and the spatial distribution of encapsulated cell payloads. These observations help us to fundamentally understand how the gels flow during injection through a thin catheter and how they immediately restore mechanically and morphologically relative to preflow, static gels.

Surface-induced phase behavior of polymer/nanoparticle blends with attractions.

In an athermal blend of nanoparticles and homopolymer near a hard wall, there is a first order phase transition in which the nanoparticles segregate to the wall and form a densely packed monolayer above a certain nanoparticle density. Previous investigations of this phase transition employed a fluids density functional theory (DFT) at constant packing fraction. Here we report further DFT calculations to probe the robustness of this phase transition. We find that the phase transition also occurs in athermal systems at constant pressure, the more natural experimental condition than constant packing fraction. Adding nanoparticle-polymer attractions increases the nanoparticle transition density, while sufficiently strong attractions suppress the first-order transition entirely. In this case the systems display a continuous transition to a bulk layered state. Adding attractions between the polymers and the wall has a similar effect of delaying and then suppressing the first-order nanoparticle segregation transition, but does not lead to any continuous phase transitions.

A healable supramolecular polymer blend based on aromatic pi-pi stacking and hydrogen-bonding interactions.

An elastomeric, healable, supramolecular polymer blend comprising a chain-folding polyimide and a telechelic polyurethane with pyrenyl end groups is compatibilized by aromatic pi-pi stacking between the pi-electron-deficient diimide groups and the pi-electron-rich pyrenyl units. This interpolymer interaction is the key to forming a tough, healable, elastomeric material. Variable-temperature FTIR analysis of the bulk material also conclusively demonstrates the presence of hydrogen bonding, which complements the pi-pi stacking interactions. Variable-temperature SAXS analysis shows that the healable polymeric blend has a nanophase-separated morphology and that the X-ray contrast between the two types of domain increases with increasing temperature, a feature that is repeatable over several heating and cooling cycles. A fractured sample of this material reproducibly regains more than 95% of the tensile modulus, 91% of the elongation to break, and 77% of the modulus of toughness of the pristine material.

Nanoparticle agglomeration in polymer-based solar cells.

We show that the morphology of polymer-based solar cells substantially changes after annealing using small angle neutron scattering. Phenyl-C61-butyric acid methyl ester (PCBM) is found reasonably well dispersed within the poly(3-hexylthiophene) (P3HT) rich phase after initial processing (spin coating). However, the PCBM structure coarsens after annealing, clearly evidenced by the increase in scattering intensity at a small wave vector. The change in morphology at the nanoscale is related to improved device performance and the simultaneous, contradictory, increase in photoluminescence.

Expanded chain dimensions in polymer melts with nanoparticle fillers.

We apply the self-consistent polymer reference interaction site model (SC/PRISM) to liquid state calculations of the chain dimensions in polymer melts with added nanoparticle fillers. The nanoparticles are assumed to be smaller than the polymer radius of gyration and are attracted to the polymer so that they are miscible. We find that the nanoparticles perturb the chain dimensions, causing an increase in the radius of gyration with increasing nanoparticle volume fractions, assuming reasonable interaction energies between the various components. The magnitude of the expansion is in qualitative agreement with recent neutron scattering results and suggests that the SC/PRISM approach is reasonable when dealing with these apparent nonlinear phenomena present in nanocomposites in the protein limit.

100th Anniversary of Macromolecular Science Viewpoint: High Refractive Index Polymers from Elemental Sulfur for Infrared Thermal Imaging and Optics.

Optical technologies in the midwave and long wave infrared spectrum (MWIR, LWIR) are important systems for high resolution thermal imaging in near, or complete darkness. While IR thermal imaging has been extensively utilized in the defense sector, application of this technology is being driven toward emerging consumer markets and transportation. In this viewpoint, we review the field of IR thermal imaging and discuss the emerging use of synthetic organic and hybrid polymers as novel IR transmissive materials for this application. In particular, we review the critical role of elemental sulfur as a novel feedstock to prepare high refractive index polymers via inverse vulcanization and discuss the fundamental chemical insights required to impart improved IR transparency into these polymeric materials.

Chalcogenide Hybrid Inorganic/Organic Polymers: Ultrahigh Refractive Index Polymers for Infrared Imaging.

We report on the preparation of ultrahigh refractive index polymers via the inverse vulcanization of elemental sulfur, selenium, and 1,3-diisopropenylbenzene for use as novel transmissive materials for mid-infrared (IR) imaging applications. Poly(sulfur-random-selenium-random-(1,3-diisopropenylbenzene)) (poly(S-r-Se-r-DIB) terpolymer materials from this process exhibit the highest refractive index of any synthetic polymer (n > 2.0) and excellent IR transparency, which can be directly tuned by terpolymer composition. Sulfur or selenium containing (co)polymers prepared via inverse vulcanization can be described as Chalcogenide Hybrid Inorganic/Organic Polymers (CHIPs) and are polymeric analogues to wholly inorganic Chalcogenide Glasses (ChGs), which are commonly used as transmissive materials in mid-IR imaging. Finally, we demonstrate that CHIPs composed of (poly(S-r-Se-r-DIB) can be melt processed into windows that enabled high quality mid-IR thermal imaging of human subjects and highly resolved imaging of human vasculature.

High Refractive Index Copolymers with Improved Thermomechanical Properties via the Inverse Vulcanization of Sulfur and 1,3,5-Triisopropenylbenzene.

The synthesis of a novel high sulfur content material possessing improved thermomechanical properties is reported via the inverse vulcanization of elemental sulfur (S8) and 1,3,5-triisopropenylbenzene (TIB). A key feature of this system was the ability to afford highly cross-linked, thermosetting materials, where the use of TIB as a comonomer enabled facile control of the network structure and dramatically improved the glass transition temperature (relative to our earlier sulfur copolymers) of poly(sulfur-random-(1,3,5-triisopropenylbenzene)) (poly(S-r-TIB)) materials over a range from T = 68 to 130 °C. This approach allowed for the incorporation of a high content of sulfur-sulfur (S-S) units in the copolymer that enabled thermomechanical scission of these dynamic covalent bonds and thermal reprocessing of the material, which we confirmed via dynamic rheological characterization. Furthermore, the high sulfur content also imparted high refractive index (n > 1.75) and IR transparency to poly(S-r-TIB) copolymers, which offered a route to enhanced optical transmitting materials for IR thermal imaging applications with improved thermomechanical properties.

Three-Phase Morphology of Semicrystalline Polymer Semiconductors: A Quantitative Analysis.

Quantitative morphological analysis is essential to the fundamental understanding of semiconducting polymers. Temperature modulated differential scanning calorimetry is used to determine the amount of crystalline and noncrystalline phases within regioregular poly(3-hexylthiophene) (rrP3HT). Careful optimization of the experimental conditions shows that the glass transition of rrP3HT consists of three parts corresponding to the devitrification of the side chains, mobile amorphous fraction (MAF), and rigid amorphous fraction (RAF), consecutively. Measurements taken from this, as well as from the melting transition, allows the first calculation of the degree of crystallinity, MAF and RAF, to be achieved in a single experiment for rrP3HT. This technique thus enables the morphological phases to be determined and potentially related to the performance of electronic devices made from semiconducting polymers.

Dynamic Covalent Polymers via Inverse Vulcanization of Elemental Sulfur for Healable Infrared Optical Materials.

We report on dynamic covalent polymers derived from elemental sulfur that can be used as thermally healable optical polymers for mid-IR thermal imaging applications. By accessing dynamic S-S bonds in these sulfur copolymers, surface scratches and defects of free-standing films of poly(sulfur-random-1,3-diisopropenylbenzene) (poly(S-r-DIB) can be thermally healed, which enables damaged lenses and windows from these materials to be reprocessed to recover their IR imaging performance. Correlation of the mechanical properties of these sulfur copolymers with different curing methods provided insights to reprocess damaged samples of these materials. Mid-IR thermal imaging experiments with windows before and after healing of surface defects demonstrated successful application of these materials to create a new class of "scratch and heal" optical polymers. The use of dynamic covalent polymers as healable materials for IR applications offers a unique advantage over the current state of the art (e.g., germanium or chalcogenide glasses) due to both the dynamic character and useful optical properties of S-S bonds.

Meter-long multiblock copolymer microfibers via interfacial bioorthogonal polymerization.

High-molecular-weight multiblock copolymers are synthesized as robust polymer fibers via interfacial bioorthogonal polymerization employing the rapid cycloaddition of s-tetrazines with strained trans-cyclooctenes. When cell-adhesive peptide is incorporated in the tetrazine monomer, the resulting protein-mimetic polymer fibers provide guidance cues for cell attachment and elongation.

Preparation of Dynamic Covalent Polymers via Inverse Vulcanization of Elemental Sulfur.

The synthesis of dynamic covalent polymers with controllable amounts of sulfur-sulfur (S-S) bonds in the polymer backbone via inverse vulcanization of elemental sulfur (S8) and 1,3-diisopropenylbenzene (DIB) is reported. An attractive feature of the inverse vulcanization process is the ability to control the number and dynamic nature of S-S bonds in poly(sulfur-random-(1,3-diisopropenylbenzene)) (poly(S-r-DIB) copolymers by simple variation of S8/DIB feed ratios in the copolymerization. S-S bonds in poly(S-r-DIB) copolymers of high sulfur content and sulfur rank were found to be more dynamic upon exposure to either heat, or mechanical stimuli. Interrogation of dynamic S-S bonds was conducted in the solid-state utilizing electron paramagnetic resonance spectroscopy and in situ rheological measurements. Time-dependent rheological property behavior demonstrated a compositional dependence of the healing behavior in the copolymers, with the highest sulfur (80 wt % sulfur) content affording the most rapid dynamic response and recovery of rheological properties.

New infrared transmitting material via inverse vulcanization of elemental sulfur to prepare high refractive index polymers.

Polymers for IR imaging: The preparation of high refractive index polymers (n = 1.75 to 1.86) via the inverse vulcanization of elemental sulfur is reported. High quality imaging in the near (1.5 µm) and mid-IR (3-5 µm) regions using high refractive index polymeric lenses from these sulfur materials was demonstrated.

The use of elemental sulfur as an alternative feedstock for polymeric materials.

An excess of elemental sulfur is generated annually from hydrodesulfurization in petroleum refining processes; however, it has a limited number of uses, of which one example is the production of sulfuric acid. Despite this excess, the development of synthetic and processing methods to convert elemental sulfur into useful chemical substances has not been investigated widely. Here we report a facile method (termed 'inverse vulcanization') to prepare chemically stable and processable polymeric materials through the direct copolymerization of elemental sulfur with vinylic monomers. This methodology enabled the modification of sulfur into processable copolymer forms with tunable thermomechanical properties, which leads to well-defined sulfur-rich micropatterned films created by imprint lithography. We also demonstrate that these copolymers exhibit comparable electrochemical properties to elemental sulfur and could serve as the active material in Li-S batteries, exhibiting high specific capacity (823 mA h g(-1) at 100 cycles) and enhanced capacity retention.

Percolating bulk heterostructures from neutron reflectometry and small-angle scattering data.

We generate percolating fullerene-polymer bulk heterostructures that are consistent with the experimental characterization of a nanostructure, in particular neutron reflectometry and small-angle neutron scattering data from as-cast and annealed poly(3-hexylthiophene) (P3HT) and [6,6]-phenyl C61-butyric acid methyl ester systems. Transport simulations correlate changes in exciton dissociation efficiency and charge collection efficiency with morphological features including characteristic domain size, fullerene concentration profile, degree of fullerene sequestration, and degree of P3HT crystallization.