Structural Investigation and Optical Properties of Dysprosium (Dy3+) Ions Doped Oxyfluoro Antimony Borate Glasses for Photonics Applications.

Dysprosium oxide-doped glasses with a composition of 60B2O3-10Sb2O3-10Al2O3-10NaF-(10-x) LiF-xDy2O3 (x = 0.1,0.5, 1.0,1.5,2.0,2.5 mol%) were prepared using a conventional melt-quenching technique. The glasses were characterized through various analytical investigations, including X-ray diffraction (XRD), Fourier transform infrared (FTIR) spectroscopy, refractive index, density, optical absorption, excitation, photoluminescence (PL) studies, decay measurements and radiation shielding parameters. The XRD and FT-IR confirms the glassy nature and functional groups present in the titled glass. The absorption spectra were used to determine the oscillator strength of the Dy3+ absorption transitions as well as the bond created with the O-2 ion in the titled glass network. The degree of the suitability of developed glasses for lasing applications was demonstrated by radiative parameters determined using Judd-Ofelt theory. In the prepared glass samples, the optical bandgap measurements indicate the presence of non-bridging oxygen (NBOs), localization of charges and donor centers in the titled glasses. Due to the de-excitation of 4F9/2 to the corresponding 6H15/2,6H13/2 and 6H11/2 states, the PL emission spectrum shows two main strong emissions at blue(480nm), yellow (575nm) and one less emission at red (663nm). The CIE coordinates determined using PL emission spectra reveal the coordinates that are falling within the white light region. Various shielding parameters such as mass attenuation coefficient, mean free path, effective atomic number were estimated to understand the radiative shielding nature of the titled glasses. Within the addition of Dy2O3, it was found that the shielding parameters values of the titled glass samples are increasing. The Mass Attenuation Coefficient, Half Value Layer and Mean Free Path of the as prepared glasses has been compared with different types of concretes to understand the shielding effectiveness of prepared glass.

Colour tunable photoluminescence studies of Dy3+/Eu3+ co-doped BaPbAlFB glasses for epoxy-free w-LED applications.

Barium lead alumino fluoroborate (BaPbAlFB) glasses singly and co-doped with Dy3+ and Eu3+ ions were prepared by melt quench method and studied their photoluminescence (PL) properties along with energy migration. Singly doped Dy3+/Eu3+ ions in BaPbAlFB glasses under 365 and 393 nm excitation wavelengths emit the PL bands through Dy: (4F9/2 → 6H15/2 and 4F9/2 → 6H13/2) and Eu: (5D0→7F2) transitions located at (Dy: 483 and 575 nm) and (Eu: 613 nm) respectively. Further, tunability of PL emissions is achieved by exciting the Dy3+/Eu3+ co-doped BaPbAlFB glasses at various wavelengths. The obtained CIE (0.34, 0.33) and CCT value (5080.4 K) of Dy3+/Eu3+ co-doped BaPbAlFB glass produced white light emission under 365 nm excitation wavelength. The corresponding CCT values of Dy3+/Eu3+ co-doped BaPbAlFB glasses varied from 1580 to 5080 K and their corresponding color emission changes from intense red to white light regime quite suitable for fabrication of epoxy-free w-LED devices.

White light emission from Dy3+-doped ZnO + Bi2O3 + BaF2 + B2O3 + TeO2 glasses: Structural and spectroscopic properties.

The ZnO + Bi2O3 + BaF2 + B2O3 + TeO2 (ZnBiBaBFTe) host glass was prepared by melt quenching technique with the aim of achieving white light emission from Dy3+ ions. Their structural and spectroscopic properties were systemically investigated by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), UV-Visible absorption, emission spectra and decay times. Judd-Ofelt (JO) parameters (Ωλ) evaluated from absorption spectrum were utilized to calculate the radiative parameters for 4F9/2 level of Dy3+ ions. The optical band gap energy of as-prepared glasses were calculated for the indirect, (αhυ)1/2 and direct, (αhυ)2 allowed transitions. The emission spectra of Dy3+:ZnBiBaBFTe glasses showed two intense peaks at 575 nm (4F9/2→6H13/2) and 481 nm (4F9/26H15/2) upon 386 nm excitation. The highest emission intensity was observed at 1.0 mol% of Dy3+ for 4F9/2→6H13/2 transition and the results are used in conjunction with lifetime measurements to derive spectroscopic parameters for the stimulated emission cross-section (25.2 × 10-22 cm2), gain bandwidth (5.86 × 10-28 cm3), and favourable quantum efficiency (74.2%). Moreover, white light can be realized with a CIE coordinates by adjusting the concentration of Dy3+ ions in ZnBiBaBFTe host glass. Efficient spectroscopic values and realizable white lighting in Dy3+-doped ZnBiBaBFTe glasses may have potential applications in laser illumination devices.

Optical studies of Sm³âº ions doped zinc alumino bismuth borate glasses.

Zinc Alumino Bismuth Borate (ZnAlBiB) glasses doped with different concentrations of samarium (Sm(3+)) ions were prepared by using melt quenching technique and characterized for their lasing potentialities in visible region by using the techniques such as optical absorption, emission and emission decay measurements. Radiative properties for various fluorescent levels of Sm(3+) ions were estimated from absorption spectral information using Judd-Ofelt (JO) analysis. The emission spectra and con-focal photoluminescence images obtained by 410 nm laser excitation demonstrates very distinct and intense orange-red emission for all the doped glasses. The suitable concentration of Sm(3+) ions in these glasses to act as an efficient lasing material has been discussed by measuring the emission cross-section and branching ratios for the emission transitions. The quantum efficiencies were also been estimated from emission decay measurements recorded for the (4)G5/2 level of Sm(3+) ions. From the measured emission cross-sections, branching ratios, strong photoluminescence features and CIE chromaticity coordinates, it was found that 1 mol% of Sm(3+) ions doped ZnAlBiB glasses are most suitable for the development of visible orange-red lasers.