Treatment of model solutions and wastewater containing selected hazardous metal ions using a chitin/lignin hybrid material as an effective sorbent.

A chitin/lignin material with defined physicochemical and morphological properties was used as an effective adsorbent of environmentally toxic metals from model systems. Particularly significant is its use in the neutralization of real industrial wastes. The ions Ni2+, Cu2+, Zn2+ and Pb2+ were adsorbed on the functional sorbent, confirming the high sorption capacity of the newly obtained product, primarily due to the presence on its surface of numerous active functional groups from the component biopolymers. The kinetics of the process of ion adsorption from model solution were investigated, and the experimental data were found to fit significantly better to a type 1 pseudo-second-order kinetic model, as confirmed by the high correlation coefficient of 0.999 for adsorption of both nickel(II) copper(II) zinc(II) and lead(II) ions. The experimental data obtained on the basis of adsorption isotherms corresponded to the Langmuir model. The sorption capacity of the chitin/lignin material was measured at 70.41 mg(Ni2+)/g, 75.70 mg(Cu2+)/g, 82.41 mg(Zn2+)/g and 91.74 mg(Pb2+)/g. Analysis of thermodynamic parameters confirmed the endothermic nature of the process. It was also shown that nitric acid is a very effective desorbing (regenerating) agent, enabling the chitin/lignin material to be reused as an effective sorbent of metal ions. The sorption abilities of the chitin/lignin system with respect to particular metal ions can be ordered in the sequence Ni2+

Modification of chitin with kraft lignin and development of new biosorbents for removal of cadmium(II) and nickel(II) ions.

Novel, functional materials based on chitin of marine origin and lignin were prepared. The synthesized materials were subjected to physicochemical, dispersive-morphological and electrokinetic analysis. The results confirm the effectiveness of the proposed method of synthesis of functional chitin/lignin materials. Mechanism of chitin modification by lignin is based on formation of hydrogen bonds between chitin and lignin. Additionally, the chitin/lignin materials were studied from the perspective of waste water treatment. The synthetic method presented in this work shows an attractive and facile route for producing low-cost chitin/lignin biosorbents with high efficiency of nickel and cadmium adsorption (88.0% and 98.4%, respectively). The discovery of this facile method of synthesis of functional chitin/lignin materials will also have a significant impact on the problematic issue of the utilization of chitinous waste from the seafood industry, as well as lignin by-products from the pulp and paper industry.

Kraft lignin/silica-AgNPs as a functional material with antibacterial activity.

Advanced functional silica/lignin hybrid materials, modified with nanosilver, were obtained. The commercial silica Syloid 244 was used, modified with N-(2-aminoethyl)-3-aminopropyltrimethoxysilane to increase its chemical affinity to lignin. Similarly, kraft lignin was oxidized using a solution of sodium periodate to activate appropriate functional groups on its surface. Silver nanoparticles were grafted onto the resulting silica/lignin hybrids. The systems obtained were comprehensively tested using available techniques and methods, including transmission electron microscopy, Fourier transform infrared spectroscopy, energy-dispersive X-ray spectroscopy, elemental analysis and atomic absorption spectroscopy. An evaluation was also made of the electrokinetic stability of the systems with and without silver nanoparticles. Conclusions were drawn concerning the chemical nature of the bonds between the precursors and the effectiveness of the method of binding nanosilver to the hybrid materials. The antimicrobial activity of the studied materials was tested against five species of Gram-positive and Gram-negative bacteria. The addition of silver nanoparticles to the silica/lignin hybrids led to inhibition of the growth of the analyzed bacteria. The best results were obtained against Pseudomonas aeruginosa, a dangerous human pathogen.