Correction: Structural bases for mechano-responsive properties in molecular gels of (R)-12-hydroxy-N-(ω-hydroxyalkyl)octadecanamides. Rates of formation and responses to destructive strain.

Correction for "Structural bases for mechano-responsive properties in molecular gels of (R)-12-hydroxy-N-(ω-hydroxyalkyl)octadecanamides. Rates of formation and responses to destructive strain" by V. Ajay Mallia and Richard G. Weiss, Soft Matter, 2015, DOI: 10.1039/C5SM00353A.

Structural bases for mechano-responsive properties in molecular gels of (R)-12-hydroxy-N-(ω-hydroxyalkyl)octadecanamides. Rates of formation and responses to destructive strain.

The self-assembly and gelation behavior of a series of (R)-12-hydroxy-N-(ω-hydroxyalkyl)octadecanamides (HS-n-OH, where n = 2, 3, 4 and 5 is the length of the alkyl chain on nitrogen), as well as those of two 'model' compounds, N-(3-hydroxypropyl)octadecanamide (S-3-OH) and (R)-12-hydroxy-N-propyloctadecanamide (HS-3), have been investigated in a wide range of liquids. A unique aspect of some of the HS-n-OH gels is the degree and velocity of their recovery of viscoelasticity after the cessation of destructive shear. The recovery times vary from less than one second to hundreds of seconds, depending on the length of the ω-hydroxyalkyl group on nitrogen. The data indicate that the modes and dynamics of aggregation of the gelator molecules from incubation of a sol phase below the gel melting temperature, as analyzed by Avrami and fractal equations, cannot be used to explain the degree and dynamics of the thixotropy: sol-to-gel transformations involve assembly of 0-dimensional objects (i.e., individual gelator molecules) into 1-dimensional fibrils and then into 3-dimensional networks; recovery after mechano-destruction of gels requires only 1-dimensional to 3-dimensional re-assembly or re-association of 3-dimensional spherulitic objects. A model to understand the extreme sensitivity of the thixotropy on the length of the ω-hydroxyalkyl group in the HS-n-OH (which is based upon detailed comparisons among the dynamic properties of the gels, the morphologies of the neat gelators, and the fibrillar networks of the gels) invokes the importance of the cleavage and reformation of H-bonds between fibers at 'junction zones' or between spherulitic objects.

Influence of anions and alkyl chain lengths of N-alkyl-n-(R)-12-hydroxyoctadecyl ammonium salts on their hydrogels and organogels.

The self-assembly and gelating characteristics of a set of N-alkyl-(R)-12-hydroxyoctadecylammonium salts (n-HOA-X, where n = 0-6, 18 is the length of the alkyl chain on nitrogen, X = Cl, n = 3, and X = Br, NO3, and BF4) are described. Solid-solid phase transitions were observed for powders of n-HOA-Cl, and orthorhombic-type crystal packing arrangements and lattice spacings were calculated from X-ray diffractograms at 22 °C. The diffractogram of 3-HOA-Br indicates the presence of more than one morph at room temperature, and that of 3-HOA-I corresponds to a lamellar packing arrangement. Differences in the molecular packing arrangements of 3-HOA-X are reflected in their gelation abilities. The melting temperatures (T(gel)) of the hydrogels of 3-HOA-Br are higher than those of 3-HOA-Cl at the same concentrations, and 3-HOA-I failed to gelate any of the investigated liquids. 3-HOA-NO3 gelated only water and CCl4 and 3-HOA-BF4 formed only hydrogels. Plots of changes in conductivities of the 3-HOA-X salts (where X = Cl, Br, NO3 and BF4) as a function of temperature were used to calculate the critical aggregation concentrations (CGCs). Because the CGCs from the 'falling drop' method are nearly the same as those from the conductivity measurements, aggregation, nucleation, and gelation must occur within a very narrow 3-HOA-X concentration range. T(gel) values of 2 wt % 3-HOA-Cl hydrogels (prepared by fast cooling of the sol phase) increased upon adding KCl up to 0.1 M. The effects can be attributed principally to the chloride anion rather than its cation partners. The properties of the hydrogels of 3-HOA-X do not follow the Hofmeister ranking rule. The variations in the counterions afford detailed insight into the behavior of 3-HOA-X in their neat solids and assemblies in gels as well as the processes accompanying gel formation in water and organic liquids.

Cooling rate effects on the microstructure, solid content, and rheological properties of organogels of amides derived from stearic and (R)-12-hydroxystearic acid in vegetable oil.

Using safflower oil as the liquid phase, we investigated the organogelation properties of stearic acid (SA), (R)-12-hydroxystearic acid (HSA), and different primary and secondary amides synthesized from SA and HSA. The objective was to establish the relationship between the gelator's molecular structure, solid content, and gels' microstructure that determines the rheological properties of organogels developed at two cooling rates, 1 and 20 °C/min. The results showed that the presence of a 12-OH group in the gelator molecule makes its crystallization kinetics cooling rate dependent and modifies its crystallization behavior. Thus, SA crystallizes as large platelets, while HSA crystallizes as fibers forming gels with higher solid content, particularly at 20 °C/min. The addition to HSA of a primary or a secondary amide bonded with an alkyl group resulted in gelator molecules that crystallized as fibrillar spherulites at both cooling rates. Independent of the cooling rate, gels of HSA and its amide derivatives showed thixotropic behavior. The rheological properties of the amide's organogels depend on a balance between hydrogen-bonding sites and the alkyl chain length bonded to the amide group. However, it might also be associated with the effect that the gelators' molecular weight has on crystal growth and its consequence on fiber interpenetration among vicinal spherulites. These results were compared with those obtained with candelilla wax (CW), a well-known edible gelling additive used by the food industry. CW organogels had higher elasticity than HSA gels but lower than the gels formed by amides. Additionally, CW gels showed similar or even higher thixotropic behavior than HSA and the amide's gels. These remarkable rheological properties resulted from the microstructural organization of CW organogels. We concluded that microstructure has a more important role determining the organogels' rheology than the solid content. The fitting models developed to describe the organogels rheological behavior support this argument.

Self-assembly of ketals of arjunolic acid into vesicles and fibers yielding gel-like dispersions.

Ten aliphatic and aromatic ketals of arjunolic acid, a renewable, nanosized triterpenic acid which is obtainable from Terminalia arjuna, have been synthesized upon condensation with aldehydes. Self-assembly properties of the ketals have been studied in a wide range of organic liquids. With the exception of the p-nitrobenzylidene derivative, low concentrations of the ketals self-assemble and form gel-like dispersions in many of the organic liquids examined. The morphologies of the assemblies, studied at different distance scales by optical, electron, and atomic-force microscopies, consisted of fibrillar networks and vesicles which were able to entrap 5(6)-carboxyfluorescein as a guest molecule. X-ray diffractograms indicate that the fibrillar objects are crystalline. A charge-transfer complex was formed from a 1:1 mixture of ketal derivatives with electron-donating and electron-accepting groups, and the 9-anthrylidene derivative in its fibrillar network dimerized upon irradiation. Results demonstrate that subtle changes in the ketal structures can lead to very different aggregation pathways.

Reversible phase transitions within self-assembled fibrillar networks of (R)-18-(n-alkylamino)octadecan-7-ols in their carbon tetrachloride gels.

The CCl(4) gel phases of a series of low-molecular-mass organogelators, (R)-18-(n-alkylamino)octadecan-7-ols (HSN-n, where n = 0-5, 18 is the alkyl chain length), appear to be unprecedented in that the fibrillar networks of some of the homologues undergo thermally reversible, gel-to-gel phase transitions, and some of those transitions are evident as opaque-transparent changes in the appearance of the samples. The gels have been examined at different concentrations and temperatures by a wide variety of spectroscopic, diffraction, thermal, and rheological techniques. Analyses of those data and data from the neat gelators have led to an understanding of the source of the gel-to-gel transitions. IR and SANS data implicate the expulsion (on heating the lower-temperature gel) or the inclusion (on cooling the higher-temperature gel) of molecules of CCl(4) that are interspersed between fibers in bundles. However, the root cause of the transitions is a consequence of changes in the molecular packing of the HSN-n within the fibers. This study offers opportunities to design new gelators that are capable of behaving in multiple fashions without entering the sol/solution phase, and it identifies a heretofore unknown transformation of organogels.

Robust organogels from nitrogen-containing derivatives of (R)-12-hydroxystearic acid as gelators: comparisons with gels from stearic acid derivatives.

Thirteen members of a new class of low molecular-mass organogelators (LMOGs), amides, and amines based on (R)-12-hydroxystearic acid (HSA; i.e., (R)-12-hydroxyoctadecanoic acid) and the properties of their gels have been investigated by a variety of structural and thermal techniques. The abilities of these LMOGs, molecules with primary and secondary amide and amine groups and the ammonium carbamate salt of 1-aminooctadecan-12-ol, to gelate a wide range of organic liquids have been ascertained. Their gelating efficiencies are compared with those of HSA and the corresponding nitrogen-containing molecules derived from stearic acid (i.e., HSA that lacks a 12-hydroxyl group). Several of the HSA-derived molecules are exceedingly efficient LMOGs, with much less than 1 wt % being necessary to gelate several organic liquids at room temperature. Generally, the self-assembled fibrillar networks of the gels consist of spherulitic objects whose dimensions depend on the protocol employed to cool the precursor sol phases. X-ray studies indicate that the LMOG molecules are packed in lamellae within the fibers that constitute the spherulites. In addition, some of the organogels exhibit unusual thixotropic properties: they recover a large part of their viscoelasticity within seconds of being destroyed by excessive strain shearing. This recovery is at least an order of magnitude faster than for any other organogel with a crystalline fibrillar network reported to date. Correlations of these LMOG structures (as well as with those that lack a hydroxyl group along the n-alkyl chain, a headgroup at its end, or both) with the properties of their gels, coupled with the unusual theological properties of these systems, point to new directions for designing LMOGs and organogels.

Self-assembly of esters of arjunolic acid into fibrous networks and the properties of their organogels.

Nine esters of a naturally occurring triterpenoid, arjunolic acid (from Terminalia arjuna), with alkyl chains have been synthesized, and their self-assembly has been studied in organic liquids. All of the esters examined were found to be excellent gelators. No birefringence was detected in optical micrographs of the transparent toluene gels with 5% (w/w) ethyl arjunolate or 5% (w/w) p-nitrobenzyl arjunolate as the gelator, but a spherulitic-type pattern was seen for a gel of 1.2% (w/w) p-nitrobenzyl arjunolate in 1/1 (w/w) chloroform/cyclohexane. Electron microscope images revealed self-assembled fibrillar network (SAFIN) structures with right-handed helical ribbons in some gels. With increasing concentration of the gelators, the gel-to-sol transition temperature (T(gel)) increased and then approached plateau values. Differential scanning thermograms demonstrated that the heats for transition from transparent gels to sols of ethyl arjunolate or p-nitrobenzyl ajunolate in toluene are very small. Powder X-ray diffractograms revealed that the molecular packing in the SAFIN of the 5% (w/w) ethyl aijunoate in the toluene gel was amorphous and similar to the diffractogram recorded for the neat gelator. Although the diffractogram of neat p-nitrobenzyl arjunolate consisted of broad peaks, suggesting disordered packing, the low-angle peaks of the corresponding toluene gel were much sharper; these results indicate more crystalline packing in the SAFIN than in the neat gelator. The kinetics and growth of the transformation of sols of p-nitrobenzyl arjunolate in 1/1 (w/w) chloroform/cyclohexane to their gels have been investigated at different incubation temperatures by circular dichroism spectroscopy. The data have been analyzed to probe the mechanism of SAFIN formation and the relationship between the molecular structures of the esters of arjunolic acid and their abilities to function as gelators of a wide variety of organic liquids.

Photoactive dimesogen having different pathways of light driven phase transitions at different temperatures.

We hereby describe a novel example of light driven phase transitions in a photoresponsive dimesogen, which goes through different pathways at different temperatures. The isomer ratios required to obtain the phase transition in each case have also been determined.

Correlations of properties and structures at different length scales of hydro- and organo-gels based on N-alkyl-(R)-12-hydroxyoctadecylammonium chlorides.

The self-assembly and gelating ability of a set of N-alkyl-(R)-12-hydroxyoctadecylammonium chlorides (NCl-n, where n = 0-6, 18 is the length of the alkyl chain on nitrogen) are described. Several are found to be ambidextrous (gelating both water and a variety of organic liquids) and very efficient (needing less than ca. 0.5 wt % at room temperature). Structure-property correlations at different distance scales of the NCl-n in their hydro- and organo-gels and neat, solid states have been made using X-ray diffraction, neutron scattering, thermal, optical, cryo-SEM and rheological techniques. The self-assembled fibrillar networks consist of spherulitic objects with fibers whose diameters and degrees of twisting differ in the hydro- and organo-gels. Increasing n (and, thus, the molecular length) increases the width of the fibers in their hydrogels; an irregular, less pronounced trend between n and fiber width is observed in the corresponding toluene gels. Time-dependent, small angle neutron scattering data for the isothermal sol-to-gel transformation of sols of NCl-18/toluene to their gels, treated according to Avrami theory, indicate heterogeneous nucleation involving rodlike growth. Rheological studies of gels of NCl-3 in water and toluene confirm their viscoelastic nature and show that the hydrogel is mechanically stronger than the toluene gel. Models for the different molecular packing arrangements within the fibrillar gel networks of the hydro- and organogels have been inferred from X-ray diffraction. The variations in the fibrillar networks provide a comprehensive picture and detailed insights into why seemingly very similar NCl-n behave very differently during their self-assembly processes in water and organic liquids. It is shown that the NCl-n provide a versatile platform for interrogating fundamental questions regarding the links between molecular structure and one-dimensional self-aggregation, leading to gelation.

Reversible thermal and photochemical switching of liquid crystalline phases and luminescence in diphenylbutadiene-based mesogenic dimers.

The synthesis and study of the photo- and thermoresponsive behavior of a series of novel asymmetric mesogenic dimers, consisting of a cholesterol moiety linked to a diphenylbutadiene chromophore via flexible alkyl chains are reported. These mesogenic dimers possess the combined glass forming properties of the cholesterol moiety and the photochromic and luminescent properties of the butadiene moiety. Photoinduced cis/trans isomerization of the butadiene chromophore in these materials could be utilized to bring about an isothermal phase transition from the smectic to the cholesteric state. By photochemically controlling the cis/trans isomer ratio, the pitch of the cholesteric could be continuously varied making it possible to tune the color of the film over the entire visible region, and the color images thus generated could be stabilized by converting them to N* glasses. These materials were also polymorphic, exhibiting two crystalline forms possessing distinctly different fluorescence properties. The ability to thermally switch these materials from one crystalline form to the other in a reversible manner also makes them useful for recording fluorescent images.

Design of chiral dimesogens containing cholesteryl groups; formation of new molecular organizations and their application to molecular photonics.

Photoresponsive liquid crystals and organogels are finding increasing application in information technology and photonics. In this tutorial review, the authors describe how weak intermolecular interactions facilitate molecular organization of cholesterol-containing dimesogens to form such materials. Design considerations and photoresponsive properties of both organogels and glassy liquid crystals are discussed and their applications to molecular photonics highlighted. The review will be of value to readers interested in the development of new materials which respond to the different properties of light.

Thermal hysteresis in the photoresponsivity of a langmuir film of amphiphilic spiropyran.

We have found a thermal hysteresis in the photoresponsivity of a Langmuir film for the first time. The Langmuir film of an amphiphilic spiropyran, 1',3'-dihydro-3',3'-dimethyl-6-nitro-1'-octadecyl-8-(docosanoyloxymethyl)spiro[2H-1-benzopyran-2,2'-(2H)-indole] (SP) was fabricated at 13 degrees C at 10 mN m-1, followed by heating to a given temperature. UV irradiation of this film caused only the isomerization of SP to the corresponding merocyanine (MC) up to 29 degrees C. Light-induced J-aggregation of MC occurred at 30 degrees C. On the other hand, once the film was heated to 30 degrees C, light-induced J-aggregation was observed down to 27 degrees C. The hysteresis should be related with the phase transitions that occur in the bulk of SP at similar temperatures. No significant morphological change occurred by light-induced J-aggregation in the Langmuir-Blodgett (LB) film of SP by the present method, in contrast to the case of the LB films fabricated under isothermal conditions at 30 degrees C. This feature enabled us to pattern the LB film with J-aggregate of MC by UV irradiation through a photomask of lines with a width of 5 mum each.