RESUMEN
OBJECTIVES: This study evaluated the influence of the cement composition and different polymerization protocols on the bonding chemical interaction of self-adhesive cements with synthetic hydroxyapatite. MATERIALS AND METHODS: Two commercial self-adhesive resin cements (RelyX U200 and Maxcem Elite) were selected, manipulated, mixed with hydroxyapatite dry powder (HAp), dispensed into molds, and distributed into three groups according to polymerization protocols: immediate photoactivation (IP); delayed photoactivation, 10 min self-curing and light-curing (DP); and chemical activation (CA, no light exposure). The detailed chemical information, at atomic scale, on the surface and deeper into the bulk of self-adhesive cement/hydroxyapatite mixtures was evaluated with X-ray photoelectron spectroscopy (XPS). RESULTS: Chemical elements were detected in both cements, such as Na, O, Ca, C, P, and Si. Other elements were detected in minor concentrations. RelyX U200 exhibited the most intense formation of calcium salts products when the cement/HAp mixtures were photoactivated (immediate or delayed). RelyX U200/HAp mixture under delayed photoactivation (DP) also exhibited higher binding energy between calcium moieties of the HAp and methacrylates in the cement. A higher energy difference in the interaction of HAp with the cement comparing the bulk and surface areas was observed when RelyX U200 underwent the delayed photoactivation protocol. Maxcem Elite exhibited an increased chemical reactivity when either chemically activated or immediately photoactivated and a higher binding energy of the carboxyl groups bonded to the calcium of HAp when chemically activated. CONCLUSIONS: The interaction of cements with hydroxyapatite is chemical in nature and leads to the formation of calcium salts, which may favor better integrity and longevity of adhesive restorations. The polymerization protocol affects the chemical interaction in mixtures of self-adhesive cements and hydroxyapatite, influencing the formation of these salts and the establishment of intermolecular interactions between the HAp and the cements.
Asunto(s)
Cementos Dentales/uso terapéutico , Hidroxiapatitas/uso terapéutico , Auto-Curación de Resinas Dentales , Cementos Dentales/química , Curación por Luz de Adhesivos Dentales , Espectroscopía de Fotoelectrones , Polimerizacion , Cementos de Resina/uso terapéuticoRESUMEN
Osteomyelitis is an inflammation of bone tissue usually caused by pyogenic bacteria. The most recurrent clinical approach consists of bone debridement followed by parenteral administration of antibiotics. However, systemic antibiotic treatment has limitations regarding absorption rate and bioavailability over time. The main challenge of osteomyelitis treatment consists of coupling the persistent infection treatment with the regeneration of the bone debrided. In this work, we developed an injectable drug delivery system based on poloxamer 407 hydrogel containing undoped Mg, Zn-doped tricalcium phosphate (ß-TCP), and teicoplanin, a broad-spectrum antibiotic. We evaluated how the addition of teicoplanin and ß-TCP affected the micellization, gelation, particle size, and surface charge of the hydrogel. Later, we studied the hydrogel degradation and drug delivery kinetics. Finally, the bactericidal, biocompatibility, and osteogenic properties were evaluated through in vitro studies and confirmed by in vivo Wistar rat models. Teicoplanin was found to be encapsulated in the corona portions of the hydrogel micelles, yielding a bigger hydrodynamics radius. The encapsulated teicoplanin showed a sustained release over the evaluated period, enough to trigger antibacterial properties against Gram-positive bacteria. Besides, the formulations were biocompatible and showed bone healing ability and osteogenic properties. Finally, in vivo studies confirmed that the proposed locally injected formulations yielded osteomyelitis treatment with superior outcomes than parenteral administration while promoting bone regeneration. In conclusion, the presented formulations are promising drug delivery systems for osteomyelitis treatment and deserve further technological improvements.
RESUMEN
Bisphosphonates are a class of drugs that induce bone cancer cell death and favor bone regeneration, making them suitable for bone cancer treatment. However, when combined with bioactive glasses to enhance bone regeneration, a chemical bond between biphosphonates and the glass surface inactivates their mechanism of action. A new colloidal hydrogel-based drug delivery system could overcome that limitation once bisphosphonates, such as zoledronic acid (ZA), are incorporated into hydrogel micelles, avoiding their interaction with the glass surface. In this work, we proposed formulations based on a poloxamer 407 thermo-responsive hydrogel matrix containing holmium-doped bioactive glass nanoparticles and different concentrations (0.05 and 5 mg/mL) of ZA. We characterized the influence of the glass and the ZA on the hydrogel properties. In addition, a drug concentration screening was performed, and biological characterizations evaluated the best result. The biological characterization consisted of evaluating cytotoxicity and in vitro bone regeneration ability through cell migration and quantification of genes related to osteogeneses through RT-PCR. The results suggest that the addition of glasses and ZA to the poloxamer did not significantly influence the sol-gel transition of the hydrogels (around 13 °C) regardless of the ZA content. However, the ZA at high concentration (PL-ZA100) decreased the enthalpy of gel formation from 68 to 43 kJ.mol-1 when compared with the pure hydrogel formulation (PL), suggesting a water structurer role of ZA, which is withdrawn when glass particles are added to the system (PL-BG5Ho-ZA100). Solid-state 31P nuclear resonance spectroscopy results showed that part of the ZA is chemically bonded to the glass surface, which explains the withdrawal in the water structurer role of ZA when the glasses were incorporated into the hydrogel. Besides, based on the drug release results, we proposed a model where part of the ZA is "free," encapsulated in the hydrogel matrix, while another part of the ZA is bonded to the glass surface. Finally, considering the in vitro results and our proposed model, the ratio between "free" and "bonded" ZA in our drug delivery systems showed in vitro evidence of a cancer treatment that selectively kills osteosarcoma cells while still favoring an osteogenic microenvironment. By overcoming the limitation of combining bisphosphonates with bioactive glasses, hydrogel-based drug delivery systems can be a solution for the development of new formulations proposed for bone cancer treatment in conjunction with bone regeneration.
Asunto(s)
Neoplasias Óseas , Osteosarcoma , Humanos , Difosfonatos/farmacología , Hidrogeles , Regeneración Ósea , Sistemas de Liberación de Medicamentos , Ácido Zoledrónico , Neoplasias Óseas/tratamiento farmacológico , Microambiente TumoralRESUMEN
OBJECTIVES: To assess the effect of an experimental 58S bioactive glass on dentin permeability (dP) and erosive tooth wear (dentin surface loss - dSL). METHODS: 58S bioactive glass was synthetized using a sol-gel methodology, following by lyophilization and calcination, then mixed with phosphoric acid to obtain a paste (BGP). Forty-eight dentin disks (1 mm-thick) were used for dP, and 48 dentin slabs (3 mm × 3 mm) for dSL, which were assessed at three time intervals: post-EDTA (5 min in 17% EDTA solution); post-treatment (C: distilled water; BGP: experimental bioactive glass paste; NP: Nupro prophylaxis paste; CXT: Clinpro XT varnish); and post-erosive/abrasive cycling. Data were statistically analyzed (α=0.05). RESULTS: For dP and dSL, Groups did not differ significantly post-EDTA (p>0.05). Post-treatment, all groups showed lower dP than C (p<0.05), without differing significantly among them. For the dSL analysis, Groups C, BGP and NP did not differ significantly, showing lower values than CXT (p<0.05). Post-cycling, C continued to show the highest dP (p<0.05). Specimens from Group CXT had the lowest dP and did not differ from NP (p=0.86) which did not differ from BGP (p=0.193). For C and BGP, dP value was higher post-cycling than post-treatment (p<0.05). For NP and CXT, these experimental times did not differ (p>0.05). Post-cycling, dSL for C, BGP and NP did not differ significantly; values were higher than those for CXT (p<0.05). CONCLUSIONS: BGP reduced dP after application, with a reduced effect after cycling. Nonetheless, it was not able to protect dentin against erosive tooth wear. CLINICAL SIGNIFICANCE: Minimizing dentin hypersensitivity is a challenge in the field of dentistry. The development of alternative products with potential to obliterate dentinal tubules and provide resistance to chemical/mechanical stimuli is, thus, highly desirable. We have proposed a material able to reduce dentin permeability, which has emerged as a promising alternative for this purpose.
Asunto(s)
Sensibilidad de la Dentina , Atrición Dental , Erosión de los Dientes , Desgaste de los Dientes , Humanos , Sensibilidad de la Dentina/tratamiento farmacológico , Ácido Edético/farmacología , Ácido Edético/uso terapéutico , Dentina , Microscopía Electrónica de Rastreo , Erosión de los Dientes/prevención & controlRESUMEN
The treatment of bone cancer involves tumor resection followed by bone reconstruction of the defect caused by the tumor using biomaterials. Additionally, post-surgery protocols cover chemotherapy, radiotherapy, or drug administration, which are employed as adjuvant treatments to prevent tumor recurrence. In this work, we reviewed new strategies for bone cancer treatment based on bioactive glasses as carriers of cancer-targeted and other drugs that are intended for bone regeneration in conjunction with adjuvant treatments. Drugs used in combination with bioactive glasses can be classified into cancer-target, osteoclast-target, and new therapies (such as gene delivery and bioinorganic). Microparticulated, nanoparticulated, or mesoporous bioactive glasses have been used as drug-delivery systems. Additionally, surface modification through functionalization or the production of composites based on polymers and hydrogels has been employed to improve drug-release kinetics. Overall, although different drugs and drug delivery systems have been developed, there is still room for new studies involving kinase inhibitors or antibody-conjugated drugs, as these drugs have been poorly explored in combination with bioactive glasses.
RESUMEN
Magnetic bioactive glass-ceramics are biomaterials applied for magnetic hyperthermia in bone cancer treatment, thereby treating the bone tumor besides regenerating the damaged bone. However, combining high bioactivity and high saturation magnetization remains a challenge since the thermal treatment step employed to grow magnetic phases is also related to loss of bioactivity. Here, we propose a new nanocomposite made of superparamagnetic iron oxide nanoparticles (SPIONs) dispersed in a sol-gel-derived bioactive glass matrix, which does not need any thermal treatment for crystallization of magnetic phases. The scanning and transmission electron microscopies, X-ray diffraction, and dynamic light scattering results confirm that the SPIONs are actually embedded in a nanosized glass matrix, thus forming a nanocomposite. Magnetic and calorimetric characterizations evidence their proper behavior for hyperthermia applications, besides evidencing inter-magnetic nanoparticle interactions within the nanocomposite. Bioactivity and in vitro characterizations show that such nanocomposites exhibit apatite-forming properties similar to the highly bioactive parent glass, besides being osteoinductive. This methodology is a new alternative to produce magnetic bioactive materials to which the magnetic properties only rely on the quality of the SPIONs used in the synthesis. Thereby, these nanocomposites can be recognized as a new class of bioactive materials for applications in bone cancer treatment by hyperthermia.
Asunto(s)
Hipertermia Inducida , Nanocompuestos , Materiales Biocompatibles/química , Materiales Biocompatibles/farmacología , Vidrio/química , Nanopartículas Magnéticas de Óxido de Hierro , Fenómenos Magnéticos , Nanocompuestos/químicaRESUMEN
Although the three main phases of iron oxide - hematite, maghemite, and magnetite - exhibit superparamagnetic properties at the nanoscale, only maghemite and magnetite phases have been explored in magnetic bioactive glass-ceramics aimed at applications in cancer treatment by hyperthermia. In this work, it is reported for the first time the superparamagnetic properties of hematite nanocrystals grown in a 58S bioactive glass matrix derived from sol-gel synthesis. The glass-ceramics are based on the (100-x)(58SiO2-33CaO-9P2O5)-xFe2O3 system (x = 10, 20 and 30 wt%). A thermal treatment leads to the growth of hematite (α-Fe2O3) nanocrystals, conferring superparamagnetic properties to the glass-ceramics, which is enough to produce heat under an external alternating magnetic field. Besides, the crystallization does not inhibit materials bioactivity, evidenced by the formation of calcium phosphate onto the glass-ceramic surface upon soaking in simulated body fluid. Moreover, their cytotoxicity is similar to other magnetic bioactive glass-ceramics reported in the literature. Finally, these results suggest that hematite nanocrystals' superparamagnetic properties may be explored in multifunctional glass-ceramics applied in bone cancer treatment by hyperthermia allied to bone regeneration.
Asunto(s)
Materiales Biocompatibles , Nanopartículas , Cerámica , Compuestos Férricos , Vidrio , Humanos , Hipertermia , Nanopartículas Magnéticas de Óxido de Hierro , Fenómenos MagnéticosRESUMEN
Traditional cancer treatments, such as surgery, radiotherapy, and chemotherapy, are still the most effective clinical practice options. However, these treatments may display moderate to severe side effects caused by their low temporal or spatial resolution. In this sense, photonic nanomedicine therapies have been arising as an alternative to traditional cancer treatments since they display more control of temporal and spatial resolution, thereby yielding fewer side effects. In this work, we reviewed the challenge of current cancer treatments, using the PubMed and Web of Science database, focusing on the advances of three prominent therapies approached by photonic nanomedicine: (i) photothermal therapy; (ii) photodynamic therapy; (iii) photoresponsive drug delivery systems. These photonic nanomedicines act on the cancer cells through different mechanisms, such as hyperthermic effect and delivery of chemotherapeutics and species that cause oxidative stress. Furthermore, we covered the recent advances in materials science applied in photonic nanomedicine, highlighting the main classes of materials used in each therapy, their applications in the context of cancer treatment, as well as their advantages, limitations, and future perspectives. Finally, although some photonic nanomedicines are undergoing clinical trials, their effectiveness in cancer treatment have already been highlighted by pre-clinical studies.
RESUMEN
Since patients suffer pain in the post-surgery of bone repair interventions, bioactive glass/hydrogel drug delivery systems containing local anesthetics, such as ropivacaine, could improve patient life quality by combining bone regeneration with anesthetics. However, poloxamer-based hydrogel properties are sensitive to ions, temperature, and water contents and could be structurally influenced by the ionic dissolution products from bioactive glasses of different compositions. Therefore, this study evaluated the interplay between bioactive glass dissolution kinetics and poloxamer 407 properties, establishing a correlation between changes in the hydrogel and drug release kinetics. Three glass compositions were produced, yielding Ca-rich, Na-rich, and an intermediate glass composition. The influence of Ca/Na ratios on the glass structure and dissolution was investigated. Further, the glasses and ropivacaine were incorporated in the poloxamer hydrogel, and the self-assembly ability of poloxamer, the degradation rate, and the drug release kinetics of the composites were evaluated. The results suggested that glass connectivity affected the early-stage of glass dissolution, while sodium mobility influenced the long-term. The dissolution products from the glasses interact with the supramolecular structure of the poloxamer, causing structural changes responsible for hydrogel degradation. Consequently, by changing the Ca/Na ratio in the glasses, it is possible to modulate glass dissolution that, in turn, influences the ropivacaine release. Thus, we propose that the Ca/Na ratio in quaternary bioactive glasses can be used to modulate drug-delivery properties from systems based on bioactive glasses and poloxamer 407.
Asunto(s)
Hidrogeles , Poloxámero , Materiales Biocompatibles , Sistemas de Liberación de Medicamentos , Liberación de Fármacos , Vidrio , Humanos , Cinética , SolubilidadRESUMEN
The fight against cancer is an old challenge for mankind. Apart from surgery and chemotherapy, which are the most common treatments, use of radiation represents a promising, less invasive strategy that can be performed both from the outside or inside the body. The latter approach, also known as brachytherapy, relies on the use of implantable beta-emitting seeds or microspheres for killing cancer cells. A set of radioactive glasses have been developed for this purpose but their clinical use is still mainly limited to liver cancer. This review paper provides a picture of the biomedical glasses developed and experimented for brachytherapy so far, focusing the discussion on the production methods and current limitations of the available options to their diffusion in clinical practice. Highly-durable neutron-activatable glasses in the yttria-alumina-silica oxide system are typically preferred in order to avoid the potentially-dangerous release of radioisotopes, while the compositional design of degradable glass systems suitable for use in radiotherapy still remains a challenge and would deserve further investigation in the near future.
RESUMEN
Holmium-containing bioactive glasses can be applied in bone cancer treatment because the holmium content can be neutron activated, having suitable properties for brachytherapy applications, while the bioactive glass matrix can regenerate the bone alterations induced by the tumor. To facilitate the application of these glasses in clinical practice, we proposed a composite based on Poloxamer 407 thermoresponsive hydrogel, with suitable properties for applications as injectable systems. Therefore, in this work, we evaluated the influence of holmium-containing glass particles on the properties of Poloxamer 407 hydrogel (20 w/w.%), including self-assembly ability and biological properties. 58S bioactive glasses (58SiO2-33CaO-9P2O5) containing different Ho2O3 amounts (1.25, 2.5, 3.75, and 5 wt.%) were incorporated into the hydrogel. The formulations were characterized by scanning electron microscopy, differential scanning calorimetry, rheological tests, and [3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide] MTT cell viability against pre-osteoblastic and osteosarcoma cells. The results evidenced that neither the glass particles dispersed in the hydrogel nor the holmium content in the glasses significantly influenced the hydrogel self-assembly ability (Tmic ~13.8 °C and Tgel ~20 °C). Although, the glass particles considerably diminished the hydrogel viscosity in one order of magnitude at body temperature (37 °C). The cytotoxicity results evidenced that the formulations selectively favored pre-osteoblastic cell proliferation and osteosarcoma cell death. In conclusion, the formulation containing glass with the highest fraction of holmium content (5 wt.%) had the best biological results outcomes aiming its application as theragenerative materials for bone cancer treatment.
RESUMEN
Bioactive glasses containing rare earth elements have been proposed as promising candidates for applications in brachytherapy of bone cancer. However, their safety relies on a proper dissolution to avoid radioactive materials in the human body, and desirable bioactive properties to regenerate the bone defect caused by the tumor. In this work, we proposed a new series of sol-gel-derived bioactive glasses containing holmium oxide, based on the system (100-x)(58SiO2-33CaO-9P2O5)-xHo2O3 (x = 1.25, 2.5 and 5 wt%). The glasses were characterized regarding their dissolution behavior, bioactivity, and cytotoxicity with pre-osteoblastic cells. Also, in the dissolution experiments, the Arrhenius and Eyring equations were used to obtain some thermodynamic properties of glass dissolution. The results evidenced that the addition of holmium ions in the glass structure decreased the energy barrier of hydrolysis reactions, which favors glass dissolution in an early-stage. However, in the long-term, the strength of Si-O-Ho bonds may be the cause of more stable dissolution. Besides, glasses containing holmium were as bioactive as the 58S bioactive glasses, a highly bioactive composition. Cytotoxicity results showed that all glasses were not cytotoxic, and the composition containing 5 wt.% of Ho2O3 enhanced cell viability. Finally, these results suggest that these glasses are suitable materials for brachytherapy applications due to their proper dissolution behavior, high bioactivity, and high cell viability.
Asunto(s)
Braquiterapia , Holmio , Materiales Biocompatibles , Vidrio , Humanos , SolubilidadRESUMEN
This in vitro study aimed to analyze the physical and chemical characteristics of the hypersensitive human dentin-like surface after application of a bioactive glass (BG) paste (BG/Ac) irradiated or not with high-power lasers. Dentin specimens were treated with 17% Ethylenediamine tetraacetic acid (EDTA) solution to mimic a hypersensitive dentin and then submitted to neodymium: yttrium-aluminum-garnet (Nd:YAG) laser or CO2 laser irradiation prior and after application of BG/Ac. Characterizations were performed by using X-ray diffraction, Fourier transformed infrared spectroscopy, scanning electron microscopy, and energy dispersive X-ray spectroscopy. The results suggested that application of BG/Ac by itself caused some obstructions of dentinal tubules. Nd:YAG laser irradiation reduced the opening of the dentinal tubules with no changes in the collagen structure. CO2 laser irradiation caused dentin melting and resolidification along with cracks and chemical changes in collagen fibers. However, when BG/Ac paste was irradiated with lasers, a sequence of surface reactions between glass and dentin interface led to the formation of an amorphous hydroxyapatite layer, similar to that of an inorganic component of the normal dentin. Moreover, BG/Ac was able to prevent the formation of cracks and degradation of collagen fibers caused by CO2 irradiation. Overall, this study supports that application of BG/Ac paste irradiated by high-power laser could represent an effective and long-lasting therapeutic approach for dentin hypersensitivity.
Asunto(s)
Sensibilidad de la Dentina/terapia , Dentina/química , Vidrio , Rayos Láser , Aluminio , Dióxido de Carbono , Colágeno/química , Ácido Edético/química , Humanos , Técnicas In Vitro , Microscopía Electrónica de Rastreo , Diente Molar , Neodimio/química , Espectroscopía Infrarroja por Transformada de Fourier , Difracción de Rayos X , ItrioRESUMEN
OBJECTIVE: The aims of this study were: 1) to evaluate the effect of sintering temperature on microstructure, density and flexural strength of a 3Y-TZP/TiO2 composite containing 12.5 wt% of TiO2 compared to 3Y-TZP specimens (control); 2) to compare 3Y-TZP with the experimental 3Y-TZP/TiO2 composite, both sintered at 1400 °C, with respect to the following parameters: optical properties, characteristic strength, Weibull modulus, fatigue behavior, induction of osteoblasts proliferation and differentiation (mineralization nodules formation). METHODS: The 3Y-TZP and 3Y-TZP/TiO2 powders were uniaxially pressed and sintered at 1200 °C, 1300 °C, 1400 °C or 1500 °C for one hour in a furnace. The microstructural analysis consisted of X-ray diffraction and scanning electron microscopy. The density was measured by the Archimedes' principle and the flexural strength was obtained by the biaxial flexure test. The optical properties were measured using a spectrophotometer operating in the visible light wavelength range. The step-stress accelerated life testing was performed by the pneumatic mechanical cycler and the biological behavior achieved by using osteoblast-like cells (Osteo-1 cell line). RESULTS: Tetragonal zirconia was identified in all groups and cubic zirconia was identified only at 3Y-TZP group. The addition of TiO2 decreased the values of density and flexural strength of the composite 3Y-TZP/TiO2 in relation to 3Y-TZP regardless of the sintering temperature. The color difference between the two materials was not significant regarding L*a*b* parameters. The composite showed higher probability of failure, and induced higher proliferation and differentiation than control. SIGNIFICANCE: The composite developed have good aesthetic and biologics properties. However, its microstructure and mechanical properties need to be improved for future dental implant applications.
Asunto(s)
Materiales Dentales , Itrio , Cerámica , Ensayo de Materiales , Propiedades de Superficie , Temperatura , Titanio , CirconioRESUMEN
OBJECTIVE: To investigate the effect of titania addition (0, 10 and 30mol%) on the microstructure, relative density, Young's modulus (E), Poisson's ratio (υ), mechanical properties (flexural strength, σf, and Weibull modulus, m) of a Y-TZP/TiO2 composite. The effect of the presence of a biomimetic coating on the microstructure and mechanical properties was also evaluated. METHODS: Y-TZP (3mol% of yttria) and Y-TZP/TiO2 composite (10 or 30mol% of titania) were synthesized by co-precipitation. The powders were pressed and sintered at 1400°C/2h. The surfaces, with and without biomimetic coating, were characterized by X-ray diffraction analysis and scanning electron microscopy. The relative density was measured by the Archimedes' principle. E and υ were measured by ultrasonic pulse-echo method. For the mechanical properties the specimens (n=30 for each group) were tested in a universal testing machine. RESULTS: Titania addition increased the grain size of the composite and caused a significant decrease in the flexural strength (in MPa, control 815.4a; T10 455.7b and T30 336.0c), E (in GPa, control 213.4a; T10 155.8b and T30 134.0c) and relative density (control 99.0%a; T10 94.4%c and T30 96.3%b) of the Y-TZP/TiO2 composite. The presence of 30% titania caused substantial increase in m and υ. Biomimetic coating did not affect the mechanical properties of the composite. SIGNIFICANCE: The Y-TZP/TiO2 composite coated with a layer of CaP has great potential to be used as implant material. Although addition of titania affected the properties of the composite, the application of a biomimetic coating did not jeopardize its reliability.
Asunto(s)
Biomimética , Materiales Dentales/química , Titanio/química , Itrio/química , Circonio/química , Materiales Biocompatibles Revestidos , Módulo de Elasticidad , Ensayo de Materiales , Microscopía Electrónica de Rastreo , Propiedades de Superficie , Difracción de Rayos XRESUMEN
Treatments for dentine hypersensitivity (DH) may produce positive effects, though do not have lasting results. We investigated the reparative potential of stem cells derived from deciduous teeth (SHEDs) in response to components delivered from substances used in the treatment of the DH, associated or not to laser phototherapy (LPT), to stimulate dentine formation. SHEDs were submitted to substances delivered from a laboratorial P-rich bioactive glass [57SiO2 -26CaO-17P2 O5 (wt %)] or a commercially available desensitizer (Gluma® Desensitizer), associated (or not) to LPT (InGAlP diode laser, 660 nm, 0.028 cm2 , 20 mW, 5 J/cm2 , 7 s, contact mode). Biomaterial characterization was performed by X-ray diffraction, scanning electron microscopy and the particle size was evaluated by dynamic light scattering. SHEDs proliferation and differentiation were analyzed by MTT and Alizarin Red staining, respectively. The conditioned media used in these tests were evaluated regarding their pH and the ionic concentration changes due to ions leached from the bioactive glass (BG). BG majority presented a non-crystalline solid structure and mixed particle sizes characterized by the agglomeration of nanoparticles. Cultures treated with BG alone or in association to LPT showed improved cell growth in relation to Gluma® (p < 0.05). Gluma® was cytotoxic in all tested conditions, regardless irradiated or not. BG associated to LPT induced intense mineral matrix formation. In conclusion, BG releases ionic dissolution products able to promote SHEDs differentiation. BG associated to LPT improves SHEDs proliferation and differentiation in vitro, and may be a promise therapeutic approach for the DH treatment. © 2015 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 105B: 107-116, 2017.
Asunto(s)
Cerámica , Sensibilidad de la Dentina/terapia , Terapia por Luz de Baja Intensidad , Ensayo de Materiales , Células Madre/metabolismo , Diente Primario/metabolismo , Cerámica/química , Cerámica/farmacología , Femenino , Humanos , Masculino , Tamaño de la PartículaRESUMEN
Epidemiological evidence indicates that plant antioxidants activity can treat or help to prevent the development of various diseases. One species with great potential as an antioxidant is Curcuma longa. However, different extraction techniquescan influence isolated chemical compounds. This study investigated chemical composition and antioxidant activity of two rhizome extracts of C. longa: hydroethanolic, obtained by exhaustion (HECLex); and dried by a spray dryer (HECLsd). The phytochemical composition was evaluated by GC/MS. Antioxidant activity was evaluated using DPPH and FRAP assays. Total phenolic compounds and soil analyses were performed. The main components of HECLex were ar-turmerone, γ-curcumene, α-turmerone, and ß-sesquiphellandrene. The main components of HECLsd were 9,12,15-octadecatrienoic acid, 2, 3-bis([trimethylsilyl]oxy) propyl ester, verrucarol, and 1-monolinoleoylglycerol trimethylsilyl ether. HECLsd had significantly higher levels of phenolic compounds and higher antioxidant capacity compared with HECLex. In conclusion, processes of the preparation of C. longarhizomes alter the chemical components and consequently their biological activity.
La evidencia epidemiológica indica que la actividad de los antioxidantes de las plantas pueden tratar o ayudar a prevenir el desarrollo de diversas enfermedades. Una especie con gran potencial como antioxidante es Curcuma longa. Sin embargo, diferentes técnicas de extracción pueden influir en los compuestos químicos aislados. Este estudio investigó la composición química y la actividad antioxidante de dos extractos de rizoma de C. longa: hidroetanólico, obtenido por agotamiento (HECLex); y se seca con un secador por pulverización (HECLsd). La composición fitoquímica se evaluó mediante GC/MS. La actividad antioxidante se evaluó mediante ensayos DPPH y FRAP. Se realizaron análisis de suelos y compuestos fenólicos totales. Los componentes principales de HECLex fueron ar-turmerona, γ-curcumene, α-turmerone y ß-sesquiphellandrene. Los componentes principales de HECLsd fueron ácido 9,12,15-octadecatrienoico, éster 2,3-bis ([trimetilsilil] oxi) propílico, verrucarol y éter 1-monolinoleoilglicerol trimetilsilil. HECLsd tenía niveles significativamente más altos de compuestos fenólicos y mayor capacidad antioxidante en comparación con HECLex. En conclusión, los procesos de preparación de los rizomas de C. longa alteran los componentes químicos y consecuentemente su actividad biológica.
Asunto(s)
Extractos Vegetales/farmacología , Curcuma/química , Antioxidantes/farmacología , Extractos Vegetales/química , Suplementos Dietéticos , Diarilheptanoides/química , Compuestos Fenólicos/análisis , Radicales Libres , Cromatografía de Gases y Espectrometría de Masas , Fitoterapia , Antioxidantes/químicaRESUMEN
PURPOSE: Evaluate clinical and radiographic changes in primary teeth submitted to indirect pulp capping (IPC) over a 48-month-period. METHODS: Twenty seven primary molars with deep caries, but without preoperative signs of irreversible pulpits, were treated with IPC. The teeth were randomly divided into two groups, according to the material used for protection of the dentin-pulp complex. (1) a calcium hydroxide liner (Dycal) and (2) glass ionomer cement (Vitremer). RESULTS: After 48 months, Group-1 showed a success rate of 88.8% and Group-2 of 93%. No statistical significant difference between the groups was observed (P = 0.62). CLINICAL SIGNIFICANCE: The results of this study suggested that indirect pulp capping in primary teeth arrests the progression of the underlying caries, regardless of the material used as a liner.
Asunto(s)
Recubrimiento de la Pulpa Dental/métodos , Diente Primario/patología , Hidróxido de Calcio/uso terapéutico , Niño , Preescolar , Resinas Compuestas/uso terapéutico , Caries Dental/terapia , Recubrimiento de la Cavidad Dental/métodos , Preparación de la Cavidad Dental/métodos , Pulpa Dental/patología , Restauración Dental Permanente/métodos , Dentina/patología , Femenino , Estudios de Seguimiento , Cementos de Ionómero Vítreo/uso terapéutico , Humanos , Masculino , Minerales/uso terapéutico , Diente Molar/patología , Resultado del TratamientoRESUMEN
OBJECTIVES: To investigate the crystalline phases, morphological features and functional groups on the surface of sintered Y:TZP/TiO2 composite ceramics before and after the application of a biomimetic bone-like apatite layer. The effect of TiO2 content on the composite's characteristics was also evaluated. METHODS: Samples of Y:TZP containing 0-30mol% TiO2 were synthesized by co-precipitation, followed by filtration, drying and calcination. The powders were uniaxially pressed and sintered at 1500°C/1h. To obtain biomimetic coatings the samples were exposed to sodium silicate solution and then to a concentrated simulated body fluid solution. The surfaces, before and after coating, were characterized by diffuse reflectance infrared Fourier transformed spectroscopy, X-ray diffraction analysis and scanning electron microscopy. RESULTS: The surfaces of all Y:TZP/TiO2 samples were covered with a dense and uniform calcium phosphate layer with a globular microstructure. This layer was crystalline for specimens with 30% of TiO2 and amorphous for specimens with 0 and 10% of TiO2. Chemical analysis indicated that this layer was composed of type A carbonate apatite. Among the materials tested, the composite with 10% of TiO2 showed the best overall chemical and physical features, such as higher density and more cohesive amorphous apatite layer. SIGNIFICANCE: Y-TZP-based materials obtained in the present investigation by means of the successful association of a calcium phosphate biomimetic layer with small amounts TiO2 should be further explored as an option for ceramic dental implants with improved bioactivity.
Asunto(s)
Apatitas/química , Materiales Biocompatibles Revestidos/química , Implantes Dentales , Materiales Dentales/química , Titanio/química , Itrio/química , Circonio/química , Materiales Biomiméticos/química , Fosfatos de Calcio/química , Fenómenos Químicos , Precipitación Química , Cristalización , Cristalografía , Diseño de Prótesis Dental , Desecación , Filtración , Calor , Humanos , Ensayo de Materiales , Microscopía Electrónica de Rastreo , Presión , Silicatos/química , Espectroscopía Infrarroja por Transformada de Fourier , Propiedades de Superficie , Difracción de Rayos XRESUMEN
A indústria da estética vem desenvolvendo diversos recursos que promovem a prevenção e recuperação do quadro de envelhecimento, dentre estes recursos destaca-se a radiofrequência um recurso eletroterápico que ganha destaque na melhoria do contorno facial, aumento do tônus e minimização de rugas sem a necessidade de intervenção cirúrgica. Assim, esta pesquisa teve por objetivo avaliar os efeitos do tratamento facial com radiofrequência em pele de voluntárias tabagistas e não-tabagistas. Para isto, foram realizadas 10 sessões com radiofrequência em 08 voluntárias do sexo feminino, sendo 04 tabagistas e 04 não-tabagistas, com idade entre 47 e 53 anos. Os parâmetros do equipamento utilizado foi amplitude de 80% em um tempo de 25 minutos e temperatura de 40 ºC. Após o término das sessões verificou-se como resultados a redução da extensão de rugas do canto externo do olho em face direita, e redução da flacidez de canto externo da boca em face esquerda. Além de minimização da profundidade das rugas, clareamento cutâneo, favorecimento do aporte de nutrientes e oxigênio por meio da vasodilatação, melhorando o quadro de nutrição e hidratação tecidual, suavizando processos descamativos e melhorando como um todo o aspecto cutâneo.
The esthetics industry has developed several resources that promote the prevention and recovery of aging signs, and among these resources, the radiofrequency is emphasized, a prominent electrotherapy resource in the improvement of facial contour, increasing tone and minimizing wrinkles with no need for surgical intervention. Thus, this study aimed to evaluate the effects of facial skin treatment with radiofrequency on smoker and non-smoker volunteers. In order to do so, 10 radiofrequency sessions were applied to 8 female volunteers, 4 smokers and 4 nonsmokers, aged between 47 and 53 years. The equipment parameters used were 80% amplitude for 25 minutes at 40 °C. After the end of the sessions, the reducing of the length of wrinkles of the outer canthus on the right cheek and the reduction of sagging of the outer corner of the mouth on the left side were observed, as well as minimizing the depth of wrinkles, skin whitening, favoring the supply of nutrients and oxygen through vasodilation, improving the framework for tissue nutrition and hydration, softening scaly processes and improving skin appearance.