Antimicrobial Composites Based on Methacrylic Acid-Methyl Methacrylate Electrospun Fibers Stabilized with Copper(II).

This study presents fibers based on methacrylic acid-methyl methacrylate (Eudragit L100) as Cu(II) adsorbents, resulting in antimicrobial complexes. Eudragit L100, an anionic copolymer synthesized by radical polymerization, was electrospun in dimethylformamide (DMF) and ethanol (EtOH). The electrospinning process was optimized through a 22-factorial design, with independent variables (copolymer concentration and EtOH/DMF volume ratio) and three repetitions at the central point. The smallest average fiber diameter (259 ± 53 nm) was obtained at 14% w/v Eudragit L100 and 80/20 EtOH/DMF volume ratio. The fibers were characterized using scanning electron microscopy (SEM), infrared spectroscopy in attenuated total reflectance mode (FTIR-ATR), and differential scanning calorimetry (DSC). The pseudo-second-order mechanism explained the kinetic adsorption toward Cu(II). The fibers exhibited a maximum adsorption capacity (qe) of 43.70 mg/g. The DSC analysis confirmed the Cu(II) absorption, indicating complexation between metallic ions and copolymer networks. The complexed fibers showed a lower degree of swelling than the non-complexed fibers. The complexed fibers exhibited bacteriostatic activity against Gram-negative (Pseudomonas aeruginosa) and Gram-positive (Staphylococcus aureus) bacteria. This study successfully optimized the electrospinning process to produce thin fibers based on Eudragit L100 for potential applications as adsorbents for Cu(II) ions in aqueous media and for controlling bacterial growth.

Thermo- and pH-Responsive Gelatin/Polyphenolic Tannin/Graphene Oxide Hydrogels for Efficient Methylene Blue Delivery.

Gelatin (GE), amino-functionalized polyphenolic tannin derivative (TN), and graphene oxide (GO) were associated to yield thermo- and pH-responsive hydrogels for the first time. Durable hydrogel assemblies for drug delivery purposes were developed using the photosensitizer methylene blue (MB) as a drug model. The cooling GE/TN blends provide brittle physical assemblies. To overcome this disadvantage, different GO contents (between 0.31% and 1.02% wt/wt) were added to the GE/TN blend at 89.7/10.3 wt/wt. FTIR and RAMAN spectroscopy analyses characterized the materials, indicating GO presence in the hydrogels. Incorporation studies revealed a total MB (0.50 mg/mL) incorporation into the GE/TN-GO hydrogel matrices. Additionally, the proposed systems present a mechanical behavior similar to gel. The GO presence in the hydrogel matrices increased the elastic modulus from 516 to 1650 Pa. SEM revealed that hydrogels containing MB present higher porosity with interconnected pores. Dissolution and swelling degree studies revealed less stability of the GE/TN-GO-MB hydrogels in SGF medium (pH 1.2) than SIF (pH 6.8). The degradation increased in SIF with the GO content, making the polymeric matrices more hydrophilic. MB release studies revealed a process controlled by Fickian diffusion. Our results point out the pH-responsible behavior of mechanically reinforced GE/TN-GO-MB hydrogels for drug delivery systems purposes.

Bactericidal Pectin/Chitosan/Glycerol Films for Food Pack Coatings: A Critical Viewpoint.

Pectin and chitosan films containing glycerol (Gly) at 5, 10, 15, 20, 30, and 40 wt % were prepared in an aqueous HCl solution (0.10 M) by the solvent evaporation method. The unwashed film (UF) containing 40 wt % Gly (UF40) had elongation at break (ε, %) of 19%. Washed films (WFs) had high tensile strength (σ > 46 MPa) and low elongation at break (ε, <5.0%), enabling their use in food packaging applications. The polymers' self-assembling occurred during the washing, increasing the stiffness. The XPS analysis suggests that some HCl is lost during the drying process, resulting in a low acid content on the UF surfaces. The UF40 (at 5.0 mg/mL) exhibits cytocompatibility toward mammalian cells and antimicrobial and anti-adhesive properties against Escherichia coli. The remaining HCl in the UF40 can be a disadvantage for food packaging applications; the UF40 (∅ = 8.5 mm; 55 µm thickness) releases H3O+/HCl, reducing the pH to approximately 3.0 when kept in 200 mL distilled water for approximately 30 min. Therefore, we propose the use of UF40 to coat commercial food packaging. The UF40 has low permeability to water vapor and oxygen and works as a barrier against ultraviolet light. The UF40 is also colorless and completely transparent. The UF40 maintained tomatoes' structural integrity for 18 days at room temperature with no oxidation or microorganism contamination. This paper presents a critical viewpoint concerning chitosan-based films with antimicrobial activities.

SPR platform based on image acquisition for HER2 antigen detection.

HER2 antigen is a marker used for breast cancer diagnosis and prevention. Its determination has great importance since breast cancer is one of the most insidious types of cancer in women. HER2 antigen assessment in human serum is traditionally achieved by enzyme-linked immunosorbent assay (ELISA method), but it has some disadvantages, such as suppressing the thermodynamic-kinetic studies regarding the antibody-antigen interaction, and the use of labeled molecules that can promote false positive responses. Biosensors based on surface plasmon resonance (SPR) are sensitive optical techniques widely applied on bioassays. The plasmonic devices do not operate with labeled molecules, overcoming conventional immunoassay limitations, and enabling a direct detection of target analytes. In this way, a new SPR biosensor to assess HER2 antigen has been proposed, using nanohole arrays on a gold thin film by signal transduction of transmitted light measurements from array image acquisitions. These metallic nanostructures may couple the light directly on surface plasmons using a simple collinear arrangement. The proposed device reached an average sensitivity for refractive index (RI) variation on a metal surface of 4146 intensity units/RIU (RIU = RI units). The device feasibility on biomolecular assessment was evaluated. For this, 3 ng ml-1 known HER2 antigen concentration was efficiently flowed (using a microfluidic system) and detected from aqueous solutions. This outcome shows that the device may be a powerful apparatus for bioassays, particularly toward breast cancer diagnosis and prognosis.

Incorporation of conjugated fatty acids into Nile tilapia (Oreochromis niloticus).

BACKGROUND: The aim of this work was to improve the nutritional quality of Nile tilapia meat through enriched diets with conjugated isomers of linolenic acid from tung oil. The transfer process of conjugated fatty acids (CFAs) into fish muscle tissue was evaluated by gas chromatography-flame ionization detection (GC-FID) and easy ambient sonic-spray ionization mass spectrometry (EASI-MS). RESULTS: The results showed that conjugated fatty acids were transferred from enriched diet for muscle tissue of Nile tilapia. Conjugated linoleic acids biosynthesis from conjugated linolenic acids was also observed after 10 days. Other important fatty acids such as docosahexaenoic (DHA), eicosapentaenoic (EPA) and arachidonic (AA) acids were also identified over time; however, DHA showed the highest concentration when compared with EPA and AA compounds. CONCLUSION: Therefore, the nutritional quality of Nile tilapia was improved through feeding with enriched diets. The ingestion of these fish may contribute to reaching adequate levels of daily CFA consumption. Furthermore, other important substances which play an important role in human metabolism, such as EPA, DHA and AA, can also be ingested together with CFA. © 2016 Society of Chemical Industry.

Recent advances in food-packing, pharmaceutical and biomedical applications of zein and zein-based materials.

Zein is a biodegradable and biocompatible material extracted from renewable resources; it comprises almost 80% of the whole protein content in corn. This review highlights and describes some zein and zein-based materials, focusing on biomedical applications. It was demonstrated in this review that the biodegradation and biocompatibility of zein are key parameters for its uses in the food-packing, biomedical and pharmaceutical fields. Furthermore, it was pointed out that the presence of hydrophilic-hydrophobic groups in zein chains is a very important aspect for obtaining material with different hydrophobicities by mixing with other moieties (polymeric or not), but also for obtaining derivatives with different properties. The physical and chemical characteristics and special structure (at the molecular, nano and micro scales) make zein molecules inherently superior to many other polymers from natural sources and synthetic ones. The film-forming property of zein and zein-based materials is important for several applications. The good electrospinnability of zein is important for producing zein and zein-based nanofibers for applications in tissue engineering and drug delivery. The use of zein's hydrolysate peptides for reducing blood pressure is another important issue related to the application of derivatives of zein in the biomedical field. It is pointed out that the biodegradability and biocompatibility of zein and other inherent properties associated with zein's structure allow a myriad of applications of such materials with great potential in the near future.

Antimicrobial activity of chitosan derivatives containing N-quaternized moieties in its backbone: a review.

Chitosan, which is derived from a deacetylation reaction of chitin, has attractive antimicrobial activity. However, chitosan applications as a biocide are only effective in acidic medium due to its low solubility in neutral and basic conditions. Also, the positive charges carried by the protonated amine groups of chitosan (in acidic conditions) that are the driving force for its solubilization are also associated with its antimicrobial activity. Therefore, chemical modifications of chitosan are required to enhance its solubility and broaden the spectrum of its applications, including as biocide. Quaternization on the nitrogen atom of chitosan is the most used route to render water-soluble chitosan-derivatives, especially at physiological pH conditions. Recent reports in the literature demonstrate that such chitosan-derivatives present excellent antimicrobial activity due to permanent positive charge on nitrogen atoms side-bonded to the polymer backbone. This review presents some relevant work regarding the use of quaternized chitosan-derivatives obtained by different synthetic paths in applications as antimicrobial agents.

Percolation Images: Fractal Geometry Features for Brain Tumor Classification.

Brain tumor detection is crucial for clinical diagnosis and efficient therapy. In this work, we propose a hybrid approach for brain tumor classification based on both fractal geometry features and deep learning. In our proposed framework, we adopt the concept of fractal geometry to generate a "percolation" image with the aim of highlighting important spatial properties in brain images. Then both the original and the percolation images are provided as input to a convolutional neural network to detect the tumor. Extensive experiments, carried out on a well-known benchmark dataset, indicate that using percolation images can help the system perform better.

Zinc oxide nanoparticle-reinforced pectin/starch functionalized films: A sustainable solution for biodegradable packaging.

Environmental pollution caused by non-biodegradable plastic pollutants adversely affects various ecosystems. This study proposes the development of novel functional and biodegradable films based on corn starch (CST) and pectin (PEC) containing zinc oxide nanoparticles (ZnONPs) from the casting method. The films exhibited processability, transparency, low water vapor permeation, and desirable mechanical properties for food packaging and coating applications. The ZnONPs acted as a plasticizer, enhancing the film elongation at the break, increasing the pec25-1 (PEC 25 wt% and ZnONPs 1 wt%) elongation from 79.85 to 162.32 %. The improved film elasticity supported by ZnONPs reduced the material stiffness. However, the films still demonstrated an average tensile strength (0.69 MPa) 17-fold higher than the tensile strength (0.04 MPa) of the non-biodegradable commercial film based on poly(vinyl chloride). Furthermore, the ZnONPs enhanced the UV-blocking capabilities of the films, leading to wettable materials with water contact angles lower than 90°. The films showed high biodegradation rates under natural disposal conditions. The results indicated that the pec25-1/ZnONPs film is a promising eco-friendly coating in food preservation due to its biodegradability, suitable mechanical properties, low water vapor permeability, and UV-blocking properties.

OralEpitheliumDB: A Dataset for Oral Epithelial Dysplasia Image Segmentation and Classification.

Early diagnosis of potentially malignant disorders, such as oral epithelial dysplasia, is the most reliable way to prevent oral cancer. Computational algorithms have been used as an auxiliary tool to aid specialists in this process. Usually, experiments are performed on private data, making it difficult to reproduce the results. There are several public datasets of histological images, but studies focused on oral dysplasia images use inaccessible datasets. This prevents the improvement of algorithms aimed at this lesion. This study introduces an annotated public dataset of oral epithelial dysplasia tissue images. The dataset includes 456 images acquired from 30 mouse tongues. The images were categorized among the lesion grades, with nuclear structures manually marked by a trained specialist and validated by a pathologist. Also, experiments were carried out in order to illustrate the potential of the proposed dataset in classification and segmentation processes commonly explored in the literature. Convolutional neural network (CNN) models for semantic and instance segmentation were employed on the images, which were pre-processed with stain normalization methods. Then, the segmented and non-segmented images were classified with CNN architectures and machine learning algorithms. The data obtained through these processes is available in the dataset. The segmentation stage showed the F1-score value of 0.83, obtained with the U-Net model using the ResNet-50 as a backbone. At the classification stage, the most expressive result was achieved with the Random Forest method, with an accuracy value of 94.22%. The results show that the segmentation contributed to the classification results, but studies are needed for the improvement of these stages of automated diagnosis. The original, gold standard, normalized, and segmented images are publicly available and may be used for the improvement of clinical applications of CAD methods on oral epithelial dysplasia tissue images.

Expanding the Scope of an Amphoteric Condensed Tannin, Tanfloc, for Antibacterial Coatings.

Bacterial infections are a common mode of failure for medical implants. This study aims to develop antibacterial polyelectrolyte multilayer (PEM) coatings that contain a plant-derived condensed tannin polymer (Tanfloc, TAN) with inherent antimicrobial activity. Tanfloc is amphoteric, and herein we show that it can be used as either a polyanion or a polycation in PEMs, thereby expanding the possibility of its use in PEM coatings. PEMs are ordinarily formed using a polycation and a polyanion, in which the functional (ionic) groups of the two polymers are complexed to each other. However, using the amphoteric polymer Tanfloc with weakly basic amine and weakly acidic catechol and pyrogallol groups enables PEM formation using only one or the other of its functional groups, leaving the other functional group available to impart antibacterial activity. This work demonstrates Tanfloc-containing PEMs using multiple counter-polyelectrolytes including three polyanionic glycosaminoglycans of varying charge density, and the polycations N,N,N-trimethyl chitosan and polyethyleneimine. The layer-by-layer (LbL) assembly of PEMs was monitored using in situ Fourier-transform surface plasmon resonance (FT-SPR), confirming a stable LbL assembly. X-ray photoelectron spectroscopy (XPS) was used to evaluate surface chemistry, and atomic force microscopy (AFM) was used to determine the surface roughness. The LDH release levels from cells cultured on the Tanfloc-containing PEMs were not statistically different from those on the negative control (p > 0.05), confirming their non-cytotoxicity, while exhibiting remarkable antiadhesive and bactericidal properties against Pseudomonas aeruginosa (P. aeruginosa) and Staphylococcus aureus (S. aureus), respectively. The antibacterial effects were attributed to electrostatic interactions and Tanfloc's polyphenolic nature. This work underscores the potential of Tanfloc as a versatile biomaterial for combating infections on surfaces.

κ-Carrageenan/poly(vinyl alcohol) functionalized films with gallic acid and stabilized with metallic ions.

Given the environmental issues caused by the extensive use of conventional petroleum-based packaging, this work proposes functional films based on commercial κ-carrageenan (κc), poly(vinyl alcohol) (PVA), and gallic acid (GA) prepared by the "casting" method. Metallic ions in the κc composition stabilized the films, supporting processability and suitable mechanical properties. However, the incorporated GA amount (6.25 and 10 wt%) in the films created from an aqueous κc solution at 3.0 % wt/v (κc3) prevented crystalline domains in the resulting materials. The κc3/GA6.25 and κc3/GA10 films had less tensile strength (8.50 ± 0.61 and 10.28 ± 0.65 MPa) and high elongation at break (2.36 ± 0.16 and 1.19 ± 0.17 %) compared to the other samples, respectively. Low κc contents (κc2.5/GA6.25 and κc2.5/GA10) promoted stiff films and less permeability to water vapor (5.36 ± 0.51 and 3.76 ± 0.02 [×10-12 g(Pa × m × s)-1], respectively. The κc/GA weight ratio also influenced the film wettability, indicating water contact angles (WCAs) between 55 and 74°. The surface wettability implies a low oil permeability and high water swelling capacity of up to 1600 %. The κc/GA also played an essential role in the film's antimicrobial action against Staphylococcus aureus and Escherichia coli. Thus, the κc3/GA10 film showed suitable physical, chemical, and biological properties, having the potential to be applied as food coatings.

Carboxymethylcellulose hydrogels crosslinked with keratin nanoparticles for efficient prednisolone delivery.

Carboxymethylcellulose (CMC) and keratin nanoparticle (KNP) hydrogels were obtained, characterized, and applied as drug delivery systems (DDSs) for the first time. Lyophilized CMC/KNP mixtures containing 10, 25, and 50 wt% of KNPs were kept at 170 °C for 90 min to crosslink CMC chains through a solid-state reaction with the KNPs. The hydrogels were characterized by infrared spectroscopy, thermal analyses, X-ray diffraction, mechanical measurements, and scanning electron microscopy. The infrared spectra indicated the formation of ester and amide linkages between crosslinked CMC and KNPs. The elastic modulus of the hydrogel containing 10 wt% KNPs was 2-fold higher than that of the hydrogel containing 50 wt% KNPs. The mechanical properties influenced the hydrogel stability and water uptake. The anti-inflammatory prednisolone (PRED) drug was incorporated into the hydrogels, and the release mechanism was investigated. The hydrogels supported PRED release by drug desorption for approximately 360 h. A sustained release mechanism was achieved. The CMC/KNP and CMC/KNP/PRED hydrogels were cytocompatible toward mammalian cells. The CMC/KNP/PRED set imparted the highest cell viability after 7 days of incubation. This study showed a straightforward procedure to create DDSs (chemically crosslinked) based on polysaccharides and proteins for efficient PRED delivery.

Association between multidrug-resistant bacteria and outcomes in intensive care unit patients: a non-interventional study.

Background: In intensive care units (ICUs), infections by multidrug-resistant (MDR) microorganisms should be monitored to prevent healthcare-associated infections (HAIs). Methods: From 2018 to 2020, we investigated all medical records of patients admitted to the ICU of a public university hospital. All patients colonized/infected by MDR microorganisms and submitted to active surveillance cultures (ASCs) were included. Results and discussion: Male patients prevailed, and 9.5% were positive for MDR bacteria. In-hospital deaths were statistically significant (p < 0.05) for older patients, patients with orotracheal tube use during previous and current hospitalization, and patients with high blood pressure, cardiac and pulmonary diseases, and chronic kidney disease. Carbapenem resistant Enterobacteriaceae was the most frequently resistance profile, followed by extended-spectrum beta-lactamase. The diagnosis or evolution of HAIs was statistically significant (p < 0.0001) for patients treated with meropenem and vancomycin, and in-hospital deaths occurred in 29.5% of patients using polypeptides while the use of macrolides reduced the odds for mortality. The BRADEN Scale demonstrated that 50% of the patients were at high risk of dying. Conclusion: Patients hospitalized in the ICU, colonized or infected by MDR bacteria, using invasive medical devices, and with underlying medical conditions presented increased mortality rates. The prescription of meropenem and vancomycin should be carefully monitored once patients using these antimicrobials already have or develop an HAI.

Effects of a stepwise alveolar recruitment maneuver on lung volume distribution in dogs assessed by computed tomography.

Background: Pulmonary atelectasis is a commonly occurs during anesthesia. In these cases, mechanical ventilation (MV) associated with alveolar recruitment maneuvers (ARMs) and positive end-expiratory pressure (PEEP) is indicated to reverse the condition, ensure adequate gas exchange and improve oxygenation. ARMs can trigger volutrauma, barotrauma, and atelectrauma. Therefore, computed tomography (CT) is the gold-standard method for monitoring lung aeration after ARM. Objective: To evaluate lung volume distribution after stepwise ARMs using computed tomography (CT). Methods: Twelve dogs weighing 24.0 ± 6.0 kg, aged 3 ± 1 years, of both sexes and different breeds, underwent orchiectomy or ovariohysterectomy. The animals were anesthetized and ventilated in volume-controlled mode. ARMs were then initiated by positive end-expiratory pressure (PEEP) titration (5, 10, 15, and 20 cmH2O). CT scans, cardiovascular parameters, and ventilatory mechanics were evaluated at all time points. Data were assessed for normality using the Shapiro-Wilk test and a two-way analysis of variance, followed by a post-hoc Bonferroni test to identify differences between time points. Statistical significance was attributed to a value of p of <0.05. Results: CT demonstrated that the ARMs increased ventilation throughout the lung, including the dependent regions, with volumes that increased and decreased proportionally with PEEP titration. When they reached PEEP 10 and 5 cmH2O descending (d), they remained significantly higher than those in PEEP 0 cmH2O (baseline). Static compliance improved about 40% at PEEP 10d and PEEP 5d compared to baseline. There was an increase in heart rate (HR) from PEEP 15 increasing (i) (74.5%) to PEEP 10d (54.8%) compared to baseline. Mean arterial blood pressure (MABP) decreased approximately 9% from PEEP 15i to PEEP 15d compared to baseline. Conclusion: Lung attenuation and regional and global volumes assessed by CT showed that maximum pulmonary aeration distribution followed by PEEP titration occurred at PEEP 20 cmH2O, maintaining the lungs normoaerated and without hyperaeration.

Antiadhesive and antibacterial multilayer films via layer-by-layer assembly of TMC/heparin complexes.

N-Trimethyl chitosan (TMC), an antibacterial agent, and heparin (HP), an antiadhesive biopolymer, were alternately deposited on modified polystyrene films, as substrates, to built antiadhesive and antibacterial multilayer films. The properties of the multilayer films were investigated by Fourier transform infrared spectroscopy, atomic force microscopy, scanning electron microscopy, and Kelvin force microscopy. In vitro studies of controlled release of HP were evaluated in simulated intestinal fluid and simulated gastric fluid. The initial adhesion test of E. coli on multilayer films surface showed effective antiadhesive properties. The in vitro antibacterial test indicated that the multilayer films of TMC/HP based on TMC80 can kill the E. coli bacteria. Therefore, antiadhesive and antibacterial multilayer films may have good potential for coatings and surface modification of biomedical applications.

Immunoglobulin G profile in hyperacute rejection after multivisceral xenotransplantation.

INTRODUCTION: Xenotransplantation is a potential solution for the high mortality of patients on the waiting list for multivisceral transplantation; nevertheless, hyperacute rejection (HAR) hampers this practice and motivates innovative research. In this report, we describe a model of multivisceral xenotransplantation in which we observed immunoglobulin G (IgG) involvement in HAR. METHODS: We recovered en bloc multivisceral grafts (distal esophagus, stomach, small intestine, colon, liver, pancreas, and kidneys) from rabbits (n = 20) and implanted them in the swine (n = 15) or rabbits (n = 5, control). Three hours after graft reperfusion, we collected samples from all graft organs for histological study and to assess IgG fixation by immunofluorescence. Histopathologic findings were graded according to previously described methods. RESULTS: No histopathological features of rejection were seen in the rabbit allografts. In the swine-to-rabbit grafts, features of HAR were moderate in the liver and severe in esophagus, stomach, intestines, spleen, pancreas, and kidney. Xenograft vessels were the central target of HAR. The main lesions included edema, hemorrhage, thrombosis, myosites, fibrinoid degeneration, and necrosis. IgG deposition was intense on cell membranes, mainly in the vascular endothelium. CONCLUSIONS: Rabbit-to-swine multivisceral xenotransplants undergo moderate HAR in the liver and severe HAR in the other organs. Moderate HAR in the liver suggests a degree of resistance to the humoral immune response in this organ. Strong IgG fixation in cell membranes, including vascular endothelium, confirms HAR characterized by a primary humoral immune response. This model allows appraisal of HAR in multiple organs and investigation of the liver's relative resistance to this immune response.

Synthesis and Characterization of Poly (ß-amino Ester) and Applied PEGylated and Non-PEGylated Poly (ß-amino ester)/Plasmid DNA Nanoparticles for Efficient Gene Delivery.

Polymer-based nanocarriers require extensive knowledge of their chemistries to learn functionalization strategies and understand the nature of interactions that they establish with biological entities. In this research, the poly (ß-amino ester) (PßAE-447) was synthesized and characterized, aimed to identify the influence of some key parameters in the formulation process. Initially; PßAE-447 was characterized for aqueous solubility, swelling capacity, proton buffering ability, and cytotoxicity study before nanoparticles formulation. Interestingly, the polymer-supported higher cell viability than the Polyethylenimine (PEI) at 100 µg/ml. PßAE-447 complexed with GFP encoded plasmid DNA (pGFP) generated nanocarriers of 184 nm hydrodynamic radius (+7.42 mV Zeta potential) for cell transfection. Transfection assays performed with PEGylated and lyophilized PßAE-447/pDNA complexes on HEK-293, BEAS-2B, and A549 cell lines showed better transfection than PEI. The outcomes toward A549 cells (above 66%) showed the highest transfection efficiency compared to the other cell lines. Altogether, these results suggested that characterizing physicochemical properties pave the way to design a new generation of PßAE-447 for gene delivery.

Trans-resveratrol electrochemical detection using portable device based on unmodified screen-printed electrode.

Trans-resveratrol (t-RESV) is an important and natural polyphenolic antioxidant generally found in grapes and in its derivatives such as red wine and grape juices. The t-RESV has been explored in the pharmaceutical industry for its anti-inflammatory, anti-cancer, and neuroprotective properties. The t-RESV electrochemical determination has basically been carried out using modified electrodes-based sensors. Although these devices show good analytical performance, the electrode preparation can be laborious, and the devices may lack reproducibility. In this sense, it was proposed here a new methodology for the t-RESV electrochemical detection using unmodified screen-printed electrodes and differential pulse voltammetry (DPV). The response of the anodic signal has optimized varying the most important parameters of DPV (pulse time, pulse potential, and pulse step) using the response surface methodology. We showed based on analysis of variance that the new mathematical model developed can predict responses for the t-RESV using DPV. Furthermore, the new analytical method was validated from the limits of detection and quantification. We have still shown that t-RESV can be quantified in commercial drug using DPV with the optimized parameters. The selectivity test also showed that the sensor can be used to determine the antioxidant in other more complex matrices. Additionally, the proposed electrochemical system is completely portable and can work with its own energy, which facilitates point-of-care analysis.

Computed Tomography Assessment of Tidal Lung Overinflation in Domestic Cats Undergoing Pressure-Controlled Mechanical Ventilation During General Anesthesia.

Objective: This study aimed to evaluate lung overinflation at different airway inspiratory pressure levels using computed tomography in cats undergoing general anesthesia. Study Design: Prospective laboratory study. Animals: A group of 17 healthy male cats, aged 1.9-4.5 years and weighing 3.5 ± 0.5 kg. Methods: Seventeen adult male cats were ventilated in pressure-controlled mode with airway pressure stepwise increased from 5 to 15 cmH2O in 2 cmH2O steps every 5 min and then stepwise decreased. The respiratory rate was set at 15 movements per min and end-expiratory pressure at zero (ZEEP). After 5 min in each inspiratory pressure step, a 4 s inspiratory pause was performed to obtain a thoracic juxta-diaphragmatic single slice helical CT image and to collect respiratory mechanics data and an arterial blood sample. Lung parenchyma aeration was defined as overinflated, normally-aerated, poorly-aerated, and non-aerated according to the CT attenuation number (-1,000 to -900 HU, -900 to -500 HU, -500 to -100 HU, and -100 to +100 HU, respectively). Result: At 5 cmH2O airway pressure, tidal volume was 6.7± 2.2 ml kg-1, 2.1% (0.3-6.3%) of the pulmonary parenchyma was overinflated and 84.9% (77.6%-87.6%) was normally inflated. Increases in airway pressure were associated with progressive distention of the lung parenchyma. At 15 cmH2O airway pressure, tidal volume increased to 31.5± 9.9 ml kg-1 (p < 0.001), overinflated pulmonary parenchyma increased to 28.4% (21.2-30.6%) (p < 0.001), while normally inflated parenchyma decreased 57.9% (53.4-62.8%) (p < 0.001). Tidal volume and overinflated lung fraction returned to baseline when airway pressure was decreased. A progressive decrease was observed in arterial carbon dioxide partial pressure (PaCO2) and end-tidal carbon dioxide (ETCO2) when the airway pressures were increased above 9 cmH2O (p < 0.001). The increase in airway pressure promoted an elevation in pH (p < 0.001). Conclusions and Clinical Relevance: Ventilation with 5 and 7 cmH2O of airway pressure prevents overinflation in healthy cats with highly compliant chest walls, despite presenting acidemia by respiratory acidosis. This fact can be controlled by increasing or decreasing respiratory rate and inspiratory time.