Recyclable Homogeneous Catalysis Enabled by Dynamic Coordination on Rhodium(II) Axial Sites of Metal-Organic Polyhedra.

The activity of catalytic nanoparticles is strongly dependent on their surface chemistry, which controls colloidal stability and substrate diffusion toward catalytic sites. In this work, we studied how the outer surface chemistry of nanostructured Rh(II)-based metal-organic cages or polyhedra (Rh-MOPs) impacts their performance in homogeneous catalysis. Specifically, through post-synthetic coordination of aliphatic imidazole ligands onto the exohedral Rh(II) axial sites of Rh-MOPs, we solubilized a cuboctahedral Rh-MOP in dichloromethane, thereby enabling its use as a homogeneous catalyst. We demonstrated that the presence of the coordinating ligand on the surface of the Rh-MOP does not hinder its catalytic activity in styrene aziridination and cyclopropanation reactions, thanks to the dynamic Rh-imidazole coordination bond. Finally, we used similar ligand exchange post-synthetic reactions to develop a ligand-mediated approach for precipitating the Rh-MOP catalyst, facilitating the recovery and reuse of Rh-MOPs as homogeneous catalysts.

Correction: Metal-organic framework (MOF)-, covalent-organic framework (COF)-, and porous-organic polymers (POP)-catalyzed selective C-H bond activation and functionalization reactions.

Correction for 'Metal-organic framework (MOF)-, covalent-organic framework (COF)-, and porous-organic polymers (POP)-catalyzed selective C-H bond activation and functionalization reactions' by Saba Daliran et al., Chem. Soc. Rev., 2022, https://doi.org/10.1039/d1cs00976a.

Metal-organic framework (MOF)-, covalent-organic framework (COF)-, and porous-organic polymers (POP)-catalyzed selective C-H bond activation and functionalization reactions.

Although C-H functionalization is one of the simplest reactions, it requires the use of highly active and selective catalysts. Recently, C-H-active transformations using porous materials such as crystalline metal-organic frameworks (MOFs) and covalent-organic frameworks (COFs) as well as amorphous porous-organic polymers (POPs) as new emerging heterogeneous catalysts have attracted significant attention due to their promising activity and potential material tunability. These porous solids offer exceptional structural uniformity, facile tunability and permanent porosity. In addition, tuning the catalytic selectivity of these porous materials can be achieved through engineering their site microenvironments, such as metal node substitution, linker changes, node/linker functionalization, and pore modification. The present review provides an overview of the current state of the art on MOFs, COFs and POPs as advanced catalysts for various C-H bond activation reactions, providing details about their chemo-, regio-, and stereo-selectivity control, comparing their performance with that of other catalysts, triggering additional research by showing the present limitations and challenges in this area, and providing a perspective for future developments.

Single-Crystal-to-Single-Crystal Postsynthetic Modification of a Metal-Organic Framework via Ozonolysis.

We describe solid-gas phase, single-crystal-to-single-crystal, postsynthetic modifications of a metal-organic framework (MOF). Using ozone, we quantitatively transformed the olefin groups of a UiO-66-type MOF into 1,2,4-trioxolane rings, which we then selectively converted into either aldehydes or carboxylic acids.

Bioinspired Electro-Organocatalytic Material Efficient for Hydrogen Production.

Commercial carbon fibers can be used as electrodes with high conductive surfaces in reduced devices. Oxidative treatment of such electrodes results in a chemically robust material with high catalytic activity for electrochemical proton reduction, enabling the measurement of quantitative faradaic yields (>95 %) and high current densities. Combination of experiments and DFT calculations reveals that the presence of carboxylic groups triggers such electrocatalytic activity in a bioinspired manner. Analogously to the known Hantzsch esters, the oxidized carbon fiber material is able to transfer hydrides, which can react with protons, generating H2 , or with organic substrates resulting in their hydrogenation. A plausible mechanism is proposed based on DFT calculations on model systems.

Asymmetric Synthesis of Rauhut-Currier type Products by a Regioselective Mukaiyama Reaction under Bifunctional Catalysis.

The reactivity and the regioselective functionalization of silyl-diene enol ethers under a bifunctional organocatalyst provokes a dramatic change in the regioselectivity, from the 1,5- to the 1,3-functionalization. This variation makes possible the 1,3-addition of silyl-dienol ethers to nitroalkenes, giving access to the synthesis of tri- and tetrasubstituted double bonds in Rauhut-Currier type products. The process takes place under smooth conditions, nonanionic conditions, and with a high enantiomeric excess. A rational mechanistic pathway is presented based on DFT and mechanistic experiments.

Visible-Light Photocatalytic Intramolecular Cyclopropane Ring Expansion.

Described herein is a new visible-light photocatalytic strategy for the synthesis of enantioenriched dihydrofurans and cyclopentenes by an intramolecular nitro cyclopropane ring expansion reaction. Mechanistic studies and DFT calculations are used to elucidate the key factors in this new ring expansion reaction, and the need for the nitro group on the cyclopropane.

Stereodivergent Aminocatalytic Synthesis of Z- and E-Trisubstituted Double Bonds from Alkynals.

A highly diastereoselective synthesis of trisubstituted Z- or E-enals, which are important intermediates in organic synthesis, as well as being present in natural products, is described using different alkynals and nucleophiles as starting materials. Diastereocontrol is mainly governed by the appropriate catalyst. Therefore, those reactions controlled by steric effects, such as the Jørgensen-Hayashi's catalyst, give access to E isomers, and those catalysts that facilitate hydrogen bonding, such as tetrazol-pyrrolidine Ley's catalyst, allow the synthesis of Z isomers. A stereochemical model based on DFT calculations is proposed.

Direct On-Surface Patterning of a Crystalline Laminar Covalent Organic Framework Synthesized at Room Temperature.

We report herein an efficient, fast, and simple synthesis of an imine-based covalent organic framework (COF) at room temperature (hereafter, RT-COF-1). RT-COF-1 shows a layered hexagonal structure exhibiting channels, is robust, and is porous to N2 and CO2 . The room-temperature synthesis has enabled us to fabricate and position low-cost micro- and submicropatterns of RT-COF-1 on several surfaces, including solid SiO2 substrates and flexible acetate paper, by using lithographically controlled wetting and conventional ink-jet printing.

Electrochemically generated nanoparticles of halogen-bridged mixed-valence binuclear metal complex chains.

Spherical nanoparticles composed of MMX chains can be made by a polymerization strategy driven by electrochemical processes. In particular, the [Pt2(MeCS2)4I2] (MMI2) dimetal subunit is employed as a monomer for the formation of [Pt2(MeCS2)4I]n spherical nanostructures on surfaces. We have paid particular attention to elucidating the general mechanism of the deposition process on the basis of in situ electrochemical measurements. The reduction of MMI2 to give the electrodeposition of nanostructures agrees well with formation of the reduced [MMI2](-) species followed by a disproportionation mechanism mediated by iodide anions. The chemical composition of the particles was determined by energy-dispersive X-ray spectroscopy (EDX) and X-ray photoelectron spectroscopy (XPS) to reveal the MMI2 polymer.

On the road to MM'X polymers: redox properties of heterometallic Ni···Pt paddlewheel complexes.

On the quest of heterometallic mixed-valence MM'X chains, we have prepared two stable discrete bimetallic compounds: the reduced (PPN)[ClNi(µ-OSCPh)4Pt] (PPN = bis(triphenylphosphine)iminium; OSCPh = benzothiocarboxylato) and the oxidized [(H2O)Ni(µ-OSCPh)4PtCl] species. The role of the aqua and chlorido axial ligands is crucial to facilitate oxidation of the {Ni(µ-OSCPh)4Pt} core. Experimental and theoretical analyses indicate that a NiPt-Cl/Cl-NiPt isomerization process occurs in the oxidized species. The electronic structure of the reduced system shows two unpaired electrons, one located in a d(x(2)-y(2)) orbital of the Ni(II) ion and a second in the antibonding d(z(2)-dz(2)) combination from the Ni(II) and Pt(II) centers. Oxidation occurs by removing one electron from this second multicenter molecular orbital. Although the mixed-valence character of the oxidized species makes the isolation of MM'X chains very attractive, such polymeric structure is prevented by the low Pt-Cl···Ni interaction energy and the high tendency of Ni centers to coordinate water molecules. Thus, this work offers valuable insights and hints to engage the production of heterometallic mixed-valence MM'X chains, which still is a challenging task.

Highly enantioselective construction of tricyclic derivatives by the desymmetrization of cyclohexadienones.

The asymmetric synthesis of tricyclic compounds by the desymmetrization of cyclohexadienones is presented. The reaction tolerated a large variety of substituents at different positions of the cyclohexadienone, and heterocyclic rings of different sizes were accessible. Density functional theory calculations showed that the reaction proceeds through an asynchronous [4+2] cycloaddition.

The isolation of single MMX chains from solution: unravelling the assembly-disassembly process.

Herein, we provide a systematic theoretical and experimental study of the structural and optical properties of MMX (M=metal, X=halide) chains. The influence of solvent, temperature, and concentration has been analyzed to find suitable parameters for initial building-block associations in solution. By using density functional calculations, we have computed the dissociation energy of different MMX oligomers (up to the tetramer) in the gas phase. On the basis of these findings, we discuss the most likely disassembly scenario and propose a new interpretation of these compounds. We also calculated the charge redistribution that occurs upon MM+XMMX binding in vacuum. Time-dependent density functional theory (TDDFT) is used to calculate the UV/visible spectra of different MMX chains up to the tetramer in the gas phase. The implications of these theoretical findings in the analysis of our experiments are discussed in the text. The overall body of data presented suggests a new way of looking at such linear structures. By taking into account these new data, we have been able to isolate single/few MMX chains on mica.

Stabilized Chiral Organic Material Containing BINAP Oxide Units as a Heterogeneous Asymmetric Organocatalyst for Allylation of Aldehydes.

Condensation of BINAPO-(PhCHO)2 and 1,3,5-tris(4-aminophenyl)benzene (TAPB) results in a new imine-based chiral organic material (COM) that can be further post-functionalized through reductive transformation of imine linkers to amines. While the imine-based material does not show the necessary stability to be used as a heterogeneous catalyst, the reduced amine-linked framework can be efficiently employed in asymmetric allylation of different aromatic aldehydes. Yields and enantiomeric excesses found are comparable to those observed for the molecular BINAP oxide catalyst, but importantly, the amine-based material also permits its recyclability.

Recent Advances in the Use of Covalent Organic Frameworks as Heterogenous Photocatalysts in Organic Synthesis.

Organic photochemistry is intensely developed in the 1980s, in which the nature of excited electronic states and the energy and electron transfer processes are thoroughly studied and finally well-understood. This knowledge from molecular organic photochemistry can be transferred to the design of covalent organic frameworks (COFs) as active visible-light photocatalysts. COFs constitute a new class of crystalline porous materials with substantial application potentials. Featured with outstanding structural tunability, large porosity, high surface area, excellent stability, and unique photoelectronic properties, COFs are studied as potential candidates in various research areas (e.g., photocatalysis). This review aims to provide the state-of-the-art insights into the design of COF photocatalysts (pristine, functionalized, and hybrid COFs) for organic transformations. The catalytic reaction mechanism of COF-based photocatalysts and the influence of dimensionality and crystallinity on heterogenous photocatalysis performance are also discussed, followed by perspectives and prospects on the main challenges and opportunities in future research of COFs and COF-based photocatalysts.

Structural insights into hybrid immiscible blends of metal-organic framework and sodium ultraphosphate glasses.

Recently, increased attention has been focused on amorphous metal-organic frameworks (MOFs) and, more specifically, MOF glasses, the first new glass category discovered since the 1970s. In this work, we explore the fabrication of a compositional series of hybrid blends, the first example of blending a MOF and inorganic glass. We combine ZIF-62(Zn) glass and an inorganic glass, 30Na2O-70P2O5, to combine the chemical versatility of the MOF glass with the mechanical properties of the inorganic glass. We investigate the interfacial interactions between the two components using pair distribution function analysis and solid state NMR spectroscopy, and suggest potential interactions between the two phases. Thermal analysis of the blend samples indicated that they were less thermally stable than the starting materials and had a Tg shifted relative to the pristine materials. Annular dark field scanning transmission electron microscopy tomography, X-ray energy dispersive spectroscopy (EDS), nanoindentation and 31P NMR all indicated close mixing of the two phases, suggesting the formation of immiscible blends.

Intramolecular gas-phase reactions of synthetic nonheme oxoiron(IV) ions: proximity and spin-state reactivity rules.

The intramolecular gas-phase reactivity of four oxoiron(IV) complexes supported by tetradentate N(4) ligands (L) has been studied by means of tandem mass spectrometry measurements in which the gas-phase ions [Fe(IV)(O)(L)(OTf)](+) (OTf = trifluoromethanesulfonate) and [Fe(IV) (O)(L)](2+) were isolated and then allowed to fragment by collision-induced decay (CID). CID fragmentation of cations derived from oxoiron(IV) complexes of 1,4,8,11-tetramethyl-1,4,8,11-tetraazacyclotetradecane (tmc) and N,N'-bis(2-pyridylmethyl)-1,5-diazacyclooctane (L(8)Py(2)) afforded the same predominant products irrespective of whether they were hexacoordinate or pentacoordinate. These products resulted from the loss of water by dehydrogenation of ethylene or propylene linkers on the tetradentate ligand. In contrast, CID fragmentation of ions derived from oxoiron(IV) complexes of linear tetradentate ligands N,N'-bis(2-pyridylmethyl)-1,2-diaminoethane (bpmen) and N,N'-bis(2-pyridylmethyl)-1,3-diaminopropane (bpmpn) showed predominant oxidative N-dealkylation for the hexacoordinate [Fe(IV)(O)(L)(OTf)](+) cations and predominant dehydrogenation of the diaminoethane/propane backbone for the pentacoordinate [Fe(IV)(O)(L)](2+) cations. DFT calculations on [Fe(IV)(O)(bpmen)] ions showed that the experimentally observed preference for oxidative N-dealkylation versus dehydrogenation of the diaminoethane linker for the hexa- and pentacoordinate ions, respectively, is dictated by the proximity of the target C-H bond to the oxoiron(IV) moiety and the reactive spin state. Therefore, there must be a difference in ligand topology between the two ions. More importantly, despite the constraints on the geometries of the TS that prohibit the usual upright σ trajectory and prevent optimal σ(CH)-σ*(z2) overlap, all the reactions still proceed preferentially on the quintet (S = 2) state surface, which increases the number of exchange interactions in the d block of iron and leads thereby to exchange enhanced reactivity (EER). As such, EER is responsible for the dominance of the S = 2 reactions for both hexa- and pentacoordinate complexes.

The structural diversity triggered by intermolecular interactions between Au(I)S2 groups: aurophilia and beyond.

The present study is aimed at elucidating the factors that direct the assembly of a specific family of Au(I) species. The assembly of Au(I) centers and dithiocarboxylato or xanthato ligands results in a surprising structural diversity observed by single-crystal X-ray diffraction. However, in solution, just evidences for discrete bimetallic [Au(2)L(2)] species have been observed. Interestingly, when dithiocarboxylato ligands have been used, a reversible supramolecular assembly has been observed forming the supramolecules of formulae [Au(2)L(2)](2) and [Au(2)L(2)](3). Initial studies on luminescent properties have been carried out at variable temperature. All the compounds show red emissions in the solid state at very similar energies, suggesting that the intramolecular interactions play a more relevant role in the luminescent properties than the intermolecular ones. The computational studies indicate that not only Au···Au interactions, but also Au···S and S···S ones play a role in the structure and energetic of the supramolecular species, as well as for the choice between supramolecular association or intramolecular oligomerization.

Supramolecular assembly of diplatinum species through weak Pt(II)⋠⋠⋠Pt(II) intermolecular interactions: a combined experimental and computational study.

The present study elucidates the factors that govern the spontaneous self-assembly of a family of dimetal [Pt(2)L(4)] (L=dithiocarboxylato ligand) complexes. Experimental data show that variables such as temperature, concentration, solvent and the nature of the ligand L have a critical effect on the reversible self-assembly of supramolecular [Pt(2)L(4)](n) entities. In solution, new UV/Vis spectroscopic features emerge at low temperatures and/or high concentrations, which are attributed to the formation of oligomeric [Pt(2)L(4)](n) species. The description of intermolecular Pt⋅⋅⋅Pt interactions, the main driving force for the association, was addressed from a computational perspective. The contributions from intermolecular Pt⋅⋅⋅S and S⋅⋅⋅S interactions to these supramolecular assemblies were found to be repulsive. Experimental UV/Vis data have been interpreted by means of computational spectroscopy.

Tuning the Activity-Stability Balance of Photocatalytic Organic Materials for Oxidative Coupling Reactions.

Three materials containing a photoactive unit, 10-phenyl phenothiazine (PTH), have been studied for the visible light-mediated oxidative coupling of amines. In particular, the materials considered are assembled through the condensation of extended polyimine, polyhydrazone, or polytriazine frameworks. These three materials present different stabilities in the presence of strong nucleophiles such as amines, which is a key factor for efficient catalytic performance. In the series of materials reported herein, the triazine-based material shows the optimal compromise between activity and stability when studied for the oxidative coupling of amines, achieving imine products. Accordingly, while significant leaching of molecular active fragments is ruled out for triazine-based polymers, other materials of the series show a significant chemical erosion as a result of the reaction with the amine substrates. Consequently, only a triazine-based material allows performing several catalytic cycles (up to seven) with yields higher than 80%. The applicability of this heterogeneous catalyst has been proven with a variety of substrates, confirming its stability and obtaining diverse imine coupling products with excellent yields.