Mono- and Multi-Objective CFD Optimization of Graded Foam-Filled Channels.

Graded foam-filled channels are a very promising solution for improving the thermal performance of heat sinks because of their customized structures that leave large amounts of room for heat transfer enhancement. Accordingly, this paper proposes a comprehensive optimization framework to address the design of such components, which are subjected to a uniform heat flux boundary condition. The graded foam is achieved by parameterizing the spatial distributions of porosity and/or Pores Per Inch (PPI). Mono- and multi-objective optimizations are implemented to find the best combination of the foam's fluid-dynamic, geometrical and morphological design variables. The mono-objective approach addresses the Performance Evaluation Criterion (PEC) as an objective function to maximize the thermal efficiency of graded foams. The multi-objective approach addresses different objective functions by means of Pareto optimization to identify the optimal tradeoff solutions between heat transfer enhancement and pressure drop reduction. Optimizations are performed by assuming a local thermal non-equilibrium in the foam. They allowed us to achieve a 1.51 PEC value with H* = 0.50, ReH = 15000, iε = iPPI = 0.50, ε(0) = 0.85, ε(1) = 0.97, PPI(0) = 5, PPI(1) = 40, and ks→f = 104 as the design variables. For the three multi-objective functions investigated, one can extrapolate the optimum from the Pareto front via the utopia criterion, obtaining h¯ = 502 W/m2 K and Δp = 80 Pa, NuH,unif¯ = 2790 and f = 42, ⟨Ts*⟩s¯= 0.011, and Δp* = 91. The optimal solutions provide original insights and guidelines for the thermal design of graded foam-filled channels.

Experimental Evaluation of the Mechanical Strengths and the Thermal Conductivity of GGBFS and Silica Fume Based Alkali-Activated Concrete.

Alkali-activated concrete (AAC) could be a solution to use a cement-less binder and recycled materials for producing concrete reducing the carbon dioxide emission and the demand for raw materials, respectively. In addition to the environmental aspect, AACs can achieve mechanical characteristics higher than those of ordinary Portland concrete (OPC) but also an improvement of the thermal insulation capacity. Despite the positive results available in the scientific literature, the use of AACs in construction practice is still limited mainly due to the absence of codification for the mix design and consequently of specific design rules. In this paper, AAC produced by ground-granulated blast-furnace slag (GGBFS) and silica fume is investigated for the production of structural elements and to discuss the reliability of formulations for evaluating mechanical properties, necessary for structural design. The mechanical strengths (compression strength, tensile strength, flexural strength) are evaluated by experimental tests according to different curing times (7, 14, 28, 90 days) in ambient conditions and the thermal conductivity is measured to understand the effect that the material could have on thermal losses for a sustainable building perspective. The results showed that AAC strengths depend on the curing time and the exposure conditions, and the insulation properties can be improved compared to the traditional Portland cement with the proposed composition.

Assessment of Mechanical and Thermal Properties of Hemp-Lime Mortar.

The use of renewable and natural materials characterized by the low environmental impact is nowadays a key issue for the sustainable development of the construction industry. For this reason, the interest for natural fibers, to be used as reinforcement in composites as an alternative to other fibers, is continuously growing. In this paper, the use of hemp for reinforcing lime mortar used as plaster is considered with a multidisciplinary approach, taking into consideration the structural and thermal performance. Natural fibers have several advantages compared to industrial ones, such as low cost, low environmental impact, biodegradability, renewable nature. Moreover, these can show remarkable mechanical performance in relation to specific weight, and sometimes, as in the case of hemp fibers, these can improve the thermal insulation capacity of the plaster. However, the experimental results on the mechanical features are still lacking, especially to assess their durability, and the variability of thermal parameters with the mechanical characteristics. Therefore, this paper proposes an experimental program, developed at Laboratory of Materials and Structures (LAMAS) of the University of Sannio (Italy), aimed at investigating the main mechanical properties (compression strength, flexural strength) of lime mortar reinforced by hemp fibers and subjected to various environmental exposures and aging processes. The characterization is completed with the measurement for the produced samples of the thermal conductivity by means of the standardized guarded hot plate technique.