Hosing of a Long Relativistic Particle Bunch in Plasma.

Experimental results show that hosing of a long particle bunch in plasma can be induced by wakefields driven by a short, misaligned preceding bunch. Hosing develops in the plane of misalignment, self-modulation in the perpendicular plane, at frequencies close to the plasma electron frequency, and are reproducible. Development of hosing depends on misalignment direction, its growth on misalignment extent and on proton bunch charge. Results have the main characteristics of a theoretical model, are relevant to other plasma-based accelerators and represent the first characterization of hosing.

FOCUS: fast Monte Carlo approach to coherence of undulator sources.

FOCUS (Fast Monte CarlO approach to Coherence of Undulator Sources) is a new GPU-based simulation code to compute the transverse coherence of undulator radiation from ultra-relativistic electrons. The core structure of the code, which is written in the language C++ accelerated with CUDA, combines an analytical description of the emitted electric fields and massively parallel computations on GPUs. The combination is rigorously justified by a statistical description of synchrotron radiation based on a Fourier optics approach. FOCUS is validated by direct comparison with multi-electron Synchrotron Radiation Workshop (SRW) simulations, evidencing a reduction in computation times by up to five orders of magnitude on a consumer laptop. FOCUS is then applied to systematically study the transverse coherence in typical third- and fourth-generation facilities, highlighting peculiar features of undulator sources close to the diffraction limit. FOCUS is aimed at fast evaluation of the transverse coherence of undulator radiation as a function of the electron beam parameters, to support and help prepare more advanced and detailed numerical simulations with traditional codes like SRW.

European Space Agency experiments on thermodiffusion of fluid mixtures in space.

This paper describes the European Space Agency (ESA) experiments devoted to study thermodiffusion of fluid mixtures in microgravity environment, where sedimentation and convection do not affect the mass flow induced by the Soret effect. First, the experiments performed on binary mixtures in the IVIDIL and GRADFLEX experiments are described. Then, further experiments on ternary mixtures and complex fluids performed in DCMIX and planned to be performed in the context of the NEUF-DIX project are presented. Finally, multi-component mixtures studied in the SCCO project are detailed.

Experimental Observation of "Shadowing" in Optical Transition Radiation.

We report the observation of shadowing between two optical transition radiation (OTR) sources from a 205 MeV electron beam. The total optical intensity is measured as a function of the distance d between the sources, covering the range 0

Direct Observation of Incoherent Cherenkov Diffraction Radiation in the Visible Range.

We report on the observation of incoherent Cherenkov radiation emitted by a 5.3 GeV positron beam circulating in the Cornell electron-positron storage ring as the beam passes in the close vicinity of the surface of a fused silica radiator (i.e., at a distance larger than 0.8 mm). The shape of the radiator was designed in order to send the Cherenkov photons towards the detector, consisting of a compact optical system equipped with an intensified camera. The optical system allows both the measurements of 2D images and angular distribution including polarization study. The corresponding light intensity has been measured as a function of the distance between the beam and the surface of the radiator and has shown a good agreement with theoretical predictions. For highly relativistic particles, a large amount of incoherent radiation is produced in a wide spectral range. A light yield of 0.8×10^{-3} photon per particle per turn has been measured at a wavelength of 600±10 nm in a 2 cm long radiator and for an impact parameter of 1 mm. This will find applications in accelerators as noninvasive beam diagnostics for both leptons and hadrons.

Osteogenic potential of dualblocks cultured with human periodontal ligament stem cells: in vitro and synchrotron microtomography study.

BACKGROUND AND OBJECTIVE: In the present study, the early stages of in vitro bone formation in collagenated porcine scaffolds cultured with human periodontal ligament cells were investigated. The comparison between the osteogenic potential of this structure in basal and differentiating culture media was explored to predict the mechanism of its biological behavior as graft in human defect. Results were validated by synchrotron radiation X-Ray phase contrast computed microtomography (micro-CT). As the periodontal disease plays a key role in systemic and oral diseases, it is crucial to find advanced therapeutic clinical interventions to repair periodontal defects. This has been recently explored using cells and tissues developed in vitro that should ideally be immunologically, functionally, structurally and mechanically identical to the native tissue. MATERIAL AND METHODS: In vitro cultures of human periodontal ligament cells, easily obtained by scraping of alveolar crestal and horizontal fibers of the periodontal ligament, were seeded on to collagenated porcine blocks constituted by natural cancellous and cortical bone. 3D images were obtained by synchrotron radiation micro-CT and processed with a phase-retrieval algorithm based on the transport of intensity equation. RESULTS: Starting from the second week of culture, newly formed mineralized bone was detected in all the scaffolds, both in basal and differentiating media. Bone mineralization was proved to occur preferentially in the trabecular portion and in differentiating media. CONCLUSION: The chosen method, supported by phase contrast micro-CT analysis, successfully and quantitatively monitored the early stages of bone formation and the rate of the bioscaffold resorption in basal and differentiating culture media.

Spouse selection by health status and physical traits. Sardinia, 1856-1925.

Military medical information and data from civil registers of death and marriage have been used to study the role of physical characteristics and health conditions in explaining access to marriage for the male population of Alghero, a small city located in Sardinia Island (Italy), at the turn of 19th century. Literature data about contemporary populations have already demonstrated the influence of somatic traits in the mate choice. The results presented here show that men with low height and poor health status at the age of 20 were negatively selected for marriage. This holds true also in a society where families often arranged marriages for their children. This pattern of male selection on marriage was found to be particularly marked among the richest and wealthiest SES groups. Our hypothesis is that this social group carefully selected for marriage those individuals who were apparently healthier and therefore more likely to guarantee good health status and better life conditions to offspring. In evolutionary terms, the mate choice component of sexual selection suggests that the height of prospective partners could be claimed as one of the determinants, along with other environmental causes, of the observed higher stature of men belonging to the wealthiest social strata of the Alghero population.

Male fertility between biology and the socioeconomic context news from the past (Alghero, 1866-1935).

In the process of fertility decline, the role and participation of men have hardly been considered in the demographic literature. It has grown only as fertility was dropping dramatically in most Western countries, but very little has been done to analyze such an issue in historical populations. Based on individual-level data, the present paper aims at investigating, by means of hazard models, the role of males in the reproductive pattern of the pre-transitional population of Alghero, Sardinia (1866-1935). The results show a slower decrease of male fertility (-23% at 40-49 years; around -50% at 50+) compared to female fertility (about -40% already at 35-49 years), with significant differentials by socioeconomic status (SES). Wealthier men present, in fact, lower fertility than poorest ones, with a gap that, however, reduces with age and even reverses at 50+ years. The reason for such a change is likely to be partly associated with the better health conditions of the wealthy group, developed especially in adulthood, given the absence of a significant relationship between height and fertility SES differentials.

Non-invasive beam profile monitor for medical accelerators.

A beam profile monitor based on a supersonic gas-curtain is currently under development for transverse profile diagnostics of electron and proton beams in the High Luminosity LHC. This monitor uses a thin supersonic gas curtain that crosses the primary beam to be characterized under an angle of 45 degrees. The fluorescence caused by the interaction between the beam and gas-curtain is detected using a specially designed imaging system to determine the 2D transverse profile of the primary beam. Another prototype monitor based on beam induced ionization is installed at The Cockcroft Institute. This paper presents the design features of both the monitors, the gas-jet curtain formation and various experimental tests, including profile measurements of an electron beam, using helium, nitrogen and neon as gases. Such a non-invasive online beam profile monitor would be highly desirable also for medical LINAC's and storage rings as it can characterize the beam without stopping machine operation. The paper discusses opportunities for simplifying the monitor design for integration into a medical accelerator and expected monitor performance.

Optical generation of Voronoi diagram.

We present results of experiments of diffraction by an amplitude screen, made of randomly distributed circular holes. By careful selection of the experimental parameters we obtain an intensity pattern strongly connected to the Voronoi diagram (VD) generated by the centers of the apertures. With the help of simulations we give a description of the observed phenomenon and elucidate the optimal parameters for its observation. Finally, we also suggest how it can be used for a fast, all-optical generation of VDs.

"Separation" of the mother-child couple: pregnancy and maternity of drug-dependent women.

Children of drug addicts are at risk of neglect and scanty maternal care. The objective of the present study was to identify homogeneous subgroups within a sample of drug addicted women, according to the quality of the outcome of the mother-child relationship. A group of 13 opiate-addicted women, followed from the seventh month of pregnancy up until the child was 2 years of age, underwent psychometric evaluation and was subdivided into two distinct groups based on whether the child remained within the family nucleus or was entrusted to a foster family or institution. The psychometric instrument used, an adaptation of Osgood's semantic differential which investigates maternal representations, allowed us to identify items with a very high predictability for the outcome of the mother-child relationship.

SODI-COLLOID: a combination of static and dynamic light scattering on board the International Space Station.

Microgravity research in space is a complex activity where the often scarce resources available for the launch, accommodation, and operation of instrumentation call for a careful experiment planning and instrument development. In this paper we describe a module of the Selectable Optical Diagnostic Instrument, that has been designed as a compact optical diagnostic instrument for colloidal physics experiments. The peculiarity of the instrument is the combination of a novel light scattering technique known as near field scattering and standard microscopy with a low-coherence laser light source. We describe its main design features, as well as measurement results on colloidal aggregation taken on the International Space Station.

Gradient-driven fluctuations in microgravity.

Equilibrium fluctuations of thermodynamic variables, such as density or concentration, are known to be small and typically occur at a molecular length scale. In contrast, theory predicts that non-equilibrium fluctuations grow very large both in amplitude and spatial size. On earth, the presence of gravity and buoyancy forces severely limits the development of the fluctuations. We will present the results of a 14-year long international collaboration on an experiment on non-equilibrium fluctuations in a single liquid and in a polymer solution under microgravity conditions. Non-equilibrium conditions are generated by applying a temperature gradient across millimetre-size liquid slabs. Phase modulations introduced by fluctuations are measured using a quantitative shadowgraph method, with the optical axis parallel to the temperature gradient. Thousands of images are analysed and their two-dimensional power spectra yield the fluctuation structure function S(q), once data are reduced accounting for the instrumental transfer function T(q). The mean-squared amplitude of the fluctuations exhibits an impressive power-law dependence at larger q and a crossover at low q showing that the fluctuation size is limited by the sample thickness. The shape of the structure function, its increase due to removing gravity, and its dependence on applied gradient are in reasonable agreement with available theoretical predictions.

A CAD/CAM-prototyped anatomical condylar prosthesis connected to a custom-made bone plate to support a fibula free flap.

This paper describes a new protocol for mandibular reconstruction. Computer-aided design/computer-aided manufacturing (CAD/CAM) technology was used to manufacture custom-made cutting guides for tumor ablation and reconstructive plates to support fibula free flaps. CT scan data from a patient with an odontogenic keratocyst on the left mandibular ramus were elaborated to produce a virtual surgical plan of mandibular osteotomy in safe tissue for complete ramus resection. The CAD/CAM procedure was used to construct a customized surgical device composed of a cutting guide and a titanium reconstructive bone plate. The cutting guide allowed the surgeon to precisely transfer the virtual planned osteotomy into the surgical environment. The bone plate, including a custom-made anatomical condylar prosthesis, was designed using the outer surface of the healthy side of the mandible to obtain an ideal contour and avoid the bone deformities present on the side affected by the tumor. Operation time was reduced in the demolition and reconstruction phases. Functional and aesthetic outcomes allowed patients to immediately recover their usual appearance and functionality. This new protocol for mandibular reconstruction using CAD/CAM to construct custom-made guides and plates may represent a viable way to reproduce the patient's anatomical contour, give the surgeon better procedural control, and reduce operation time.