Evidence of Organic Polymeric Behavior in the Glass Transition of Metal-Organic Frameworks.

The origin of the glass transition is still an open debate, especially for the new class of glasses, formed from metal-organic compounds. High-temperature in situ 2H Nuclear Magnetic Resonance (NMR) experiments are performed on deuterated samples of ZIF-62 (Zn(C3H4N2)2-x(C7H6N2)x, with x = 0.25 and x = 0.05), the prototypical metal-organic framework glass former. Using lineshape analysis, frequencies and angular amplitudes of oscillations of the imidazolate ring during heating up to the melt progressively increasing from ≈10 to 150 MHz, and from ≈5° to 25° are found. This behavior is compositionally dependent and points to the origin of the glass transition lying in organic linker movement, in a similar vein to that witnessed in some organics and contrary to the purely inorganic-based view of Metal-Organic Framework (MOF) glasses taken to date. This experimental approach shows the potential to elucidate the melting and/or decomposition process for a wide range of MOFs.

ZIF-62 glass foam self-supported membranes to address CH4/N2 separations.

Membranes with ultrahigh permeance and practical selectivity could greatly decrease the cost of difficult industrial gas separations, such as CH4/N2 separation. Advanced membranes made from porous materials, such as metal-organic frameworks, can achieve a good gas separation performance, although they are typically formed on support layers or mixed with polymeric matrices, placing limitations on gas permeance. Here an amorphous glass foam, agfZIF-62, wherein a, g and f denote amorphous, glass and foam, respectively, was synthesized by a polymer-thermal-decomposition-assisted melting strategy, starting from a crystalline zeolitic imidazolate framework, ZIF-62. The thermal decomposition of incorporated low-molecular-weight polyethyleneimine evolves CO2, NH3 and H2O gases, creating a large number and variety of pores. This greatly increases pore interconnectivity but maintains the crystalline ZIF-62 ultramicropores, allowing ultrahigh gas permeance and good selectivity. A self-supported circular agfZIF-62 with a thickness of 200-330 µm and area of 8.55 cm2 was used for membrane separation. The membranes perform well, showing a CH4 permeance of 30,000-50,000 gas permeance units, approximately two orders of magnitude higher than that of other reported membranes, with good CH4/N2 selectivity (4-6).

Interfacial Bonding between a Crystalline Metal-Organic Framework and an Inorganic Glass.

The interface within a composite is critically important for the chemical and physical properties of these materials. However, experimental structural studies of the interfacial regions within metal-organic framework (MOF) composites are extremely challenging. Here, we provide the first example of a new MOF composite family, i.e., using an inorganic glass matrix host in place of the commonly used organic polymers. Crucially, we also decipher atom-atom interactions at the interface. In particular, we dispersed a zeolitic imidazolate framework (ZIF-8) within a phosphate glass matrix and identified interactions at the interface using several different analysis methods of pair distribution function and multinuclear multidimensional magic angle spinning nuclear magnetic resonance spectroscopy. These demonstrated glass-ZIF atom-atom correlations. Additionally, carbon dioxide uptake and stability tests were also performed to check the increment of the surface area and the stability and durability of the material in different media. This opens up possibilities for creating new composites that include the intrinsic chemical properties of the constituent MOFs and inorganic glasses.

Glass Formation in Hybrid Organic-Inorganic Perovskites.

Crystalline materials have governed the development of hybrid organic-inorganic perovskites (HOIPs), giving rise to a variety of fascinating applications such as solar cells and optoelectronic devices. With increasing interest in non-crystalline systems, the glassy state of HOIPs has recently been identified. Here, the basic building blocks of crystalline HOIPs appear to be retained, though their glasses lack long-range periodic order. The emerging family of glasses formed from HOIPs exhibits diverse properties, complementary to their crystalline state. This mini review describes the chemical diversity of both three-dimensional and two-dimensional crystalline HOIPs and demonstrates how glasses are produced from these materials. Specifically, current achievements in melt-quenched glasses formed from HOIPs are highlighted. We conclude with our perspective on the future of this new family of materials.

Properties of Single-Component Metal-Organic Framework Crystal-Glass Composites.

The formation, and subsequent structural, thermal and adsorptive properties of single-component metal-organic framework crystal-glass composites (MOF-CGCs) are investigated. A series of novel materials exhibiting chemically identical glassy and crystalline phases within the same material were produced, where crystalline ZIF-62(Zn) was incorporated within an ag ZIF-62(Zn) matrix. X-ray diffraction showed that the crystalline phase was still present after heating to above the glass transition temperature of ag ZIF-62(Zn), and interfacial compatibility between the crystalline and glassy phases was investigated using a mixed-metal (ZIF-62(Co))0.5 (ag ZIF-62(Zn))0.5 analogue. CO2 gas adsorption measurements showed that the CO2 uptakes of the MOF-CGCs were between those of the crystalline and glassy phases.

13C pNMR of "crumple zone" Cu(II) isophthalate metal-organic frameworks.

NMR spectroscopy of paramagnetic materials (pNMR) has the potential to provide great structural insight, but many challenges remain in interpreting the spectra in detail. This work presents a study of a series of structurally analogous metal-organic frameworks (MOFs) based on 5-substituted isophthalate linkers and Cu(II) paddlewheel dimers, of interest owing to their "crumple zone" structural rearrangement on dehydration/rehydration. 13C MAS NMR spectra reveal a wide variation in the observed resonance position for chemically similar C species in the different MOFs but, despite this, resonances are overlapped in several cases. However, by considering a combination of the integration of quantitative spectra, the resonance position as a function of temperature and T1 relaxation measurements, the spectra can be fully assigned. It is also demonstrated that the prototypical MOF in this series, STAM-1, displays a crumple zone rearrangement on dehydration, similar to the well-characterised 5-ethoxyisophthalate MOF (STAM-17-OEt) although, while the materials have similar local C environments, dehydrated STAM-1 exhibits less long-range order.

Metal-Organic Framework-Activated Carbon Composite Materials for the Removal of Ammonia from Contaminated Airstreams.

Metal-organic frameworks (MOFs) are a class of porous materials that show promise in the removal of toxic industrial chemicals (TICs) from contaminated airstreams, though their development for this application has so far been hindered by issues of water stability and the wide availability and low cost of traditionally used activated carbons. Here a series of three MOF-activated carbon composite materials with different MOF to carbon ratios are prepared by growing STAM-17-OEt crystals inside the commercially available BPL activated carbon. The composite materials display excellent water stability and increased uptake of ammonia gas when compared to unimpregnated carbon. Such properties make these composites very promising in the fields of air purification and personal protective equipment.

Mechanochemically-induced glass formation from two-dimensional hybrid organic-inorganic perovskites.

Hybrid organic-inorganic perovskites (HOIPs) occupy a prominent position in the field of materials chemistry due to their attractive optoelectronic properties. While extensive work has been done on the crystalline materials over the past decades, the newly reported glasses formed from HOIPs open up a new avenue for perovskite research with their unique structures and functionalities. Melt-quenching is the predominant route to glass formation; however, the absence of a stable liquid state prior to thermal decomposition precludes this method for most HOIPs. In this work, we describe the first mechanochemically-induced crystal-glass transformation of HOIPs as a rapid, green and efficient approach for producing glasses. The amorphous phase was formed from the crystalline phase within 10 minutes of ball-milling, and exhibited glass transition behaviour as evidenced by thermal analysis techniques. Time-resolved in situ ball-milling with synchrotron powder diffraction was employed to study the microstructural evolution of amorphisation, which showed that the crystallite size reaches a comminution limit before the amorphisation process is complete, indicating that energy may be further accumulated as crystal defects. Total scattering experiments revealed the limited short-range order of amorphous HOIPs, and their optical properties were studied by ultraviolet-visible (UV-vis) spectroscopy and photoluminescence (PL) spectroscopy.

Mechanochemically synthesised dicyanamide hybrid organic-inorganic perovskites, and their melt-quenched glasses.

Here we present efficient and scalable mechanochemical formation of hybrid organic-inorganic perovskites of the form [TPrA][M(dca)3] (M = Mn2+, Co2+) and the subsequent formation of their bulk melt-quenched glasses. In situ X-ray diffraction reveals direct, facile, and almost instantaneouos formation of both crystalline materials, while slow cooling limits recrystallisation in glasses. The glasses show good stability to acidic and basic aqueous solutions and display higher carbon dioxide uptakes than their crystalline precursors.

Principles of melting in hybrid organic-inorganic perovskite and polymorphic ABX3 structures.

Four novel dicyanamide-containing hybrid organic-inorganic ABX3 structures are reported, and the thermal behaviour of a series of nine perovskite and non-perovskite [AB(N(CN)2)3] (A = (C3H7)4N, (C4H9)4N, (C5H11)4N; B = Co, Fe, Mn) is analyzed. Structure-property relationships are investigated by varying both A-site organic and B-site transition metal cations. In particular, increasing the size of the A-site cation from (C3H7)4N → (C4H9)4N → (C5H11)4N was observed to result in a decrease in T m through an increase in ΔS f. Consistent trends in T m with metal replacement are observed with each A-site cation, with Co < Fe < Mn. The majority of the melts formed were found to recrystallise partially upon cooling, though glasses could be formed through a small degree of organic linker decomposition. Total scattering methods are used to provide a greater understanding of the melting mechanism.

Post-Synthetic Modification of a Metal-Organic Framework Glass.

Melt-quenched metal-organic framework (MOF) glasses have gained significant interest as the first new category of glass reported in 50 years. In this work, an amine-functionalized zeolitic imidazolate framework (ZIF), denoted ZIF-UC-6, was prepared and demonstrated to undergo both melting and glass formation. The presence of an amine group resulted in a lower melting temperature compared to other ZIFs, while also allowing material properties to be tuned by post-synthetic modification (PSM). As a prototypical example, the ZIF glass surface was functionalized with octyl isocyanate, changing its behavior from hydrophilic to hydrophobic. PSM therefore provides a promising strategy for tuning the surface properties of MOF glasses.

Formation of new crystalline qtz-[Zn(mIm)2] polymorph from amorphous ZIF-8.

The structure of a new ZIF-8 polymorph with quartz topology (qtz) is reported. This qtz-[Zn(mIm)2] phase was obtained by mechanically amorphising crystalline ZIF-8, before heating the resultant amorphous phase to between 282 and 316 °C. The high-temperature phase structure was obtained from powder X-ray diffraction, and its thermal behaviour, CO2 gas sorption properties and dye adsorption ability were investigated.

Glassy behaviour of mechanically amorphised ZIF-62 isomorphs.

Zeolitic imidazolate frameworks (ZIFs) can be melt-quenched to form glasses. Here, we present an alternative route to glassy ZIFs via mechanically induced amorphisation. This approach allows various glassy ZIFs to be produced in under 30 minutes at room temperature, without the need for melt-quenching.

Melting of hybrid organic-inorganic perovskites.

Several organic-inorganic hybrid materials from the metal-organic framework (MOF) family have been shown to form stable liquids at high temperatures. Quenching then results in the formation of melt-quenched MOF glasses that retain the three-dimensional coordination bonding of the crystalline phase. These hybrid glasses have intriguing properties and could find practical applications, yet the melt-quench phenomenon has so far remained limited to a few MOF structures. Here we turn to hybrid organic-inorganic perovskites-which occupy a prominent position within materials chemistry owing to their functional properties such as ion transport, photoconductivity, ferroelectricity and multiferroicity-and show that a series of dicyanamide-based hybrid organic-inorganic perovskites undergo melting. Our combined experimental-computational approach demonstrates that, on quenching, they form glasses that largely retain their solid-state inorganic-organic connectivity. The resulting materials show very low thermal conductivities (~0.2 W m-1 K-1), moderate electrical conductivities (10-3-10-5 S m-1) and polymer-like thermomechanical properties.

Hydrolytic stability in hemilabile metal-organic frameworks.

Highly porous metal-organic frameworks (MOFs), which have undergone exciting developments over the past few decades, show promise for a wide range of applications. However, many studies indicate that they suffer from significant stability issues, especially with respect to their interactions with water, which severely limits their practical potential. Here we demonstrate how the presence of 'sacrificial' bonds in the coordination environment of its metal centres (referred to as hemilability) endows a dehydrated copper-based MOF with good hydrolytic stability. On exposure to water, in contrast to the indiscriminate breaking of coordination bonds that typically results in structure degradation, it is non-structural weak interactions between the MOF's copper paddlewheel clusters that are broken and the framework recovers its as-synthesized, hydrated structure. This MOF retained its structural integrity even after contact with water for one year, whereas HKUST-1, a compositionally similar material that lacks these sacrificial bonds, loses its crystallinity in less than a day under the same conditions.