An assessment of the intact casein content in natural cheddar cheese to determine its suitability in processed cheeses with desired properties.

As compared to age, intact casein in the natural cheddar cheese is a better index of selection for manufacturing processed cheese. In view of this, the present investigation was designed to establish relation between intact casein of the natural cheese with desirable properties of the processed cheese so that the most desirable intact casein in the natural cheddar cheese can be selected on the basis of required properties of the processed cheese. Processed cheese was prepared by using natural cheddar cheese of different intact casein content (ICC) and analysed for meltability, oiling off and hardness. Multiple linear regression was used for prediction of ICC using meltability, oiling off and hardness and it was observed that the all the independent variables significantly affected ICC. Adjusted R2 value of 0.952 and root mean square error of 1.04 suggested a good fit and validation of the developed equation.

Homogenization and sodium hydrogen phosphate induced effect on physical and rheological properties of ultrafilterd concentrated milk.

Ultrafiltration (UF) of buffalo skim milk (BSM) induces changes in its delicate protein-mineral equilibrium. Appling UF causes alteration in chemical composition of UF retentates as a function of protein concentration that adversely affect their physical and rheological properties. Hence, present investigation was targeted to evaluate the changes taking place in heat stability, ζ-potential, particle size, apparent viscosity, pH, turbidity and crossover temperature of storage (G') and loss (G″) modulus of high-protein BSM based UF retentates as a function of homogenization and sodium hydrogen phosphate (SHP) addition. The UF of BSM (heat treated at 85 ± 1 °C for 5 min), significantly increased (P < 0.05) the concentration of protein, fat and minerals, however, it decreased the concentration of lactose and water soluble minerals in UF retentates over BSM. The SHP addition significantly increased (P < 0.05) pH, crossover temperature of G' and G″, ζ-potential, while significantly decreased (P < 0.05) turbidity and particle size in most non-homogenized retentates. Heat coagulation time (HCT) of control and treated UF retentates were at par (P > 0.05) with each other, however, variations were observed in their viscosity values. Rheological behaviour of most of these UF retentates was efficiently described by Bingham model. The correlation among ζ-potential, particle size, apparent viscosity, pH, turbidity, HCT and crossover temperatures G' and G″ of evaluated samples was also established. Overall, this study concluded that 0.5-6% SHP addition in non-homogenized UF retentates, markedly improved their milk protein stability as advocated by higher ζ-potential, G' and G″ crossover temperature values. SUPPLEMENTARY INFORMATION: The online version contains supplementary material available at 10.1007/s13197-021-05097-2.

Production and characterization of cow milk based low-protein milk protein concentrate (MPC) powders.

Ultrafiltration and Diafiltration processes are used to concentrate proteins present in defatted milk in order to manufacture milk protein concentrate (MPC) powders. Selective passage of the water-soluble components causes retention as well as concentration of colloidal milk components in these processes. Increase in calcium and casein contents decreases the stability of milk proteins present in ultrafiltered retentates and negatively influence properties of manufactured MPC powders. Homogenization, diafiltration and disodium phosphate induced changes in properties of low-protein MPC powders were targeted in this study. Applied treatments significantly (P < 0.05) improved foaming and emulsification, solubility, viscosity, heat stability, dispersibility, specific surface area and buffer index of resultant MPC powders over control. Fresh, treated low-protein MPC powders showed significantly higher (< 0.05) solubility values over control sample, which remains higher even after 60 days of storage at 25 ± 1 °C. The rheological behaviour of reconstituted low-protein MPC solutions was also studied. It was best explained as Herschel-Bulkley rheological behaviour. Low-protein MPC powders with improved functional properties may find better use as a protein ingredient in different dairy and food applications.

Effect of sodium triphosphate and sodium hexametaphosphate on properties of buffalo milk protein concentrate 60 (BMPC60) powder.

Milk protein concentrate (MPC) powders are high-protein, innovative dairy ingredients. Buffalo milk naturally contains higher concentrations of casein and calcium, which have adverse effect on solubility of MPC powders. Therefore, this study was undertaken to investigate the effect of Sodium triphosphate (STP) and Sodium hexametaphosphate (SHMP) addition in ultrafiltered retentate on physicochemical, functional and reconstitution properties, morphological characteristics and rheological behaviour of the resultant powder. Pasteurized buffalo skim milk (PBSM) was concentrated by ultrafiltration (UF) process to obtain 2.53 × UF retentate (2.53 × UFR) with 0.61 protein to total solids (TS) ratio. Compared to PBSM, ultrafiltration significantly increased (p < 0.05) calcium, protein and TS contents of 2.53 × UFR, but significantly decreased (p < 0.05) its heat stability. Addition of STP-SHMP mixture in 2.53 × UFR noticeably improved the solubility, flowability, water binding, oil binding, foaming capacity, foam and thermal stability and, viscosity of treated MPC60 powder over control powder. The DeBroukere (D43) mean, d50, specific surface area, span and water activity values of treated MPC60 powder were 94.96 ± 0.05, 78.33 ± 0.04 µm, 715.93 ± 0.29 m2 kg-1, 1.97 ± 0.01 and, 0.26 ± 0.01, respectively. Scanning electron micrograph showed the presence of different size powder particles without clustering. Rheological modelling of the reconstituted solution of treated MPC60 was very well described by Herschel-Bulkley model. Overall, this study established that addition of STP-SHMP salts mixer in 2.53 × UFR could improve the solubility of resultant buffalo milk based MPC60 powder.

Applications of reverse osmosis in dairy processing: an Indian perspective.

The Indian dairy industry is highly diversified in terms of milk production, collection, processing and waste disposal. Membrane processing allows dairy sector to manufacture high quality nutritive dairy products at lower costs with minimum water use and product losses. Compared to prevailing traditional methods of milk concentration, reverse osmosis (RO) is still evolving, finding newer applications in dairy processing because of its potential benefits. A brief overview of RO, membranes, process variables, fouling, merits and demerits along with potential suppliers and membrane utilizing dairy plants in India are systematically presented in this review. Different applications of RO in dairy industry including concentration of liquid dairy streams, further utilization of RO retentate in formulation of ice-cream, dahi, traditional Indian dairy products, cheese and dried powders is also included. RO can play a prominent role in Indian dairy sector for simplifying the process automation, product diversification and efficient waste utilization.

Organic solvent-free extraction of carotenoids from carrot bio-waste and its physico-chemical properties.

The bio-wastes (like peels, seeds, etc.) from food industry are rich source of bio-active components, but are poorly managed. In present study, carotenoids were extracted from carrot pomace using ultrasonication and high shear dispersion techniques and flaxseed oil as green solvent (green biorefinery approach). Various combinations of time and temperature were used and final selection was made on the basis of maximum recovery of carotenoids. High shear disperser yielded maximum carotenoids (recovery 94.8 ± 0.08%). The total carotenoid content, antioxidant activity as ABTS, DDPH and FRAP and ß-carotene of carotenoid rich extract from carrot pomace (CREP) were 82.66 ± 0.06 µg/g, 1596.04 ± 69.45 µg Trolox eq./ml, 380.21 ± 39.62 µg Trolox eq./ml, 941.20 ± 19.91 µM Trolox eq./ml, 78.37 µg/g, respectively were significantly higher (p < 0.05) when compared with the extracting medium. The L*, a* and b* values of CRE were 18.65 ± 0.037, 19.42 ± 0.21, 27.947 ± 0.65 and were significantly higher than extracting medium. The CRE could be used as a natural source of ß-carotene and natural colorant for food applications.

Effect of disodium phosphate and homogenization on physico-chemical and rheological properties of buffalo skim milk based ultrafiltered retentate.

The concentration of pasteurized buffalo skim milk (PBSM) employing ultrafiltration (UF) alters the chemical composition of ultrafiltered retentate that adversely affect its proteins and salts equilibrium. Effect of stabilizing salts addition in concentrated milks or retentates was majorly dedicated to their thermal stability only. Therefore, this study was aimed to investigate the effect of disodium phosphate (DSP) addition and homogenization of 2.40 × UF retentate (0.60 protein to total solids ratio) on its ζ-potential, particle size, heat stability, turbidity, pH, viscosity and crossover temperature of storage (G') and loss (G″) modulus. Concentration of PBSM in UF process, significantly (P < 0.05) increased its percent TS, protein, fat and ash contents, but markedly decreased its lactose content. DSP addition significantly increased (P < 0.05) the ζ-potential, pH, viscosity and particle size in majority of the homogenized and non-homogenized retentates. Homogenized retentates containing 2.5 and 5% DSP exhibited Newtonian and Power law flow behaviour. However, rheological behaviour of non-homogenized retentates containing zero (control), 1 and 4% DSP was best explained by Bingham model. Further, non-homogenized retentates with 0.5, 2, 3, 5% DSP exhibited Newtonian flow, but retentates containing 6 and 7% DSP was best explained by Power law. The correlation among different attributes of DSP added non-homogenized and homogenized samples were also studied. Particle size and turbidity (r = + 0.999, P < 0.05) as well as ζ-potential and crossover temperature of G' and G″ (r = + 0.999, P < 0.05) showed positive correlation in 4% DSP added non-homogenized retentate.

Effect of change in pH, heat treatment and diafiltration on properties of medium protein buffalo milk protein concentrate.

The demand of milk protein concentrate (MPC) powders is continuously increasing as high protein dairy ingredients. Presence of higher calcium and casein contents; heating, ultrafiltration (UF), diafiltration (DF) and spray drying of buffalo skim milk induces undesirable changes in milk proteins that causes problem of poor solubility in MPC powders. Therefore, this investigation was aimed to study the effect of change in pH (6.8-native, 7.0-neutral), heat treatments (74 ± 1 °C/15 s, 80 ± 1 °C/5 min, 85 ± 1 °C/5 min, 90 ± 1 °C/5 min) and DF on physicochemical, functional, reconstitution and rheological properties of medium protein buffalo milk protein concentrate (MP-BMPC) powder. Based on maximum ζ-potential and heat stability, UF retentate was selected, diafiltered and spray dried to obtain MP-BMPC powder. Despite having higher protein content, MP-BMPC powder exhibited markedly better functional (solubility, wettability, viscosity and emulsion stability) properties than buffalo milk protein concentrate 60. The interstitial air content, occluded air content, loose bulk density, packed bulk density, particle density and porosity values of MP-BMPC powder were 145.97 and 112.92 mL 100 g-1 of powder, 0.21 g mL-1, 0.30 g mL-1, 0.55 g mL-1 and 65.09%. Further, its specific surface area; particle size distribution (d10, d50, d90); Sauter (D32) and DeBroukere (D43) mean values were 97.93 m2 kg-1; 34.32, 104.42, 218.58 µm; 61.27 µm and 117.99 µm. The storage modulus (G') and loss modulus (G″) crossover temperature of UF and DF retentates were ~ 57.16 °C and 55.10 °C, respectively. Rheological behaviour of UF, DF retentates and MP-BMPC solution were best explained by Herschel-Bulkley model. Fourier-transform infrared spectroscopy best described amide I, II and III regions in 1700-1400 cm-1 and 1350-1200 cm-1 wavenumber range.

Alteration in physicochemical, functional, rheological and reconstitution properties of milk protein concentrate powder by pH, homogenization and diafiltration.

Concentration of milk proteins by ultrafiltration (UF) and diafiltration (DF) processes during manufacturing of milk protein concentrate (MPC) powders alter their natural milk protein stabilization system. Increasing calcium and protein contents often leads to poor functional properties in MPC powders. The pH adjustment using disodium phosphate (DSP, Na2HPO4) and DF with 150 mM NaCl solution of UF retentate were hypothesized to produce desirable changes in various properties of resulted MPC powders. Addition of Na2HPO4 followed by homogenization; DF of 5 × UF retentate with 150 mM NaCl solution resulted in significant improvement in the dispersibility, wettability, flowability, solubility, heat stability, buffer index, emulsification and foaming and water and oil binding capacities of the MPC powders. The solubility of developed MPC powders was significantly higher than MPC-C powder in fresh as well as even after 90 days of storage at 25 ± 1 °C. Rheological behaviour of reconstituted MPC was best explained by Herschel Bulkley model. Scanning electron microscopy micrograph indicated that MPC powders were having smooth surfaced, intact and separate smaller particles compared to rough, larger, infused aggregates with dents in MPC-C. Technological interventions applied are easier to adopt, cost-effective and efficient in producing excellent quality MPC powders that may find applications in wide range of novel food formulations.

Effect of culture levels, ultrafiltered retentate addition, total solid levels and heat treatments on quality improvement of buffalo milk plain set yoghurt.

Studied the effect of culture (2, 2.5 and 3%), ultrafiltered (UF) retentate addition (0, 11, 18%), total milk solids (13, 13.50, 14%) and heat treatments (80 and 85 °C/30 min) on the change in pH and titratable acidity (TA), sensory scores and rheological parameters of yoghurt. With 3% culture levels, the required TA (0.90% LA) was achieved in minimum 6 h incubation. With an increase in UF retentate addition, there was observed a highly significant decrease in overall acceptability, body and texture and colour and appearance scores, but there was highly significant increase in rheological parameters of yoghurt samples. Yoghurt made from even 13.75% total solids containing nil UF retentate was observed to be sufficiently firm by the sensory panel. Most of the sensory attributes of yoghurt made with 13.50% total solids were significantly better than yoghurt prepared with either 13 or 14% total solids. Standardised milk heated to 85 °C/30 min resulted in significantly better overall acceptability in yoghurt. Overall acceptability of optimised yoghurt was significantly better than a branded market sample. UF retentate addition adversely affected yoghurt quality, whereas optimization of culture levels, totals milk solids and others process parameters noticeably improved the quality of plain set yoghurt with a shelf life of 15 days at 4 °C.

Application of ohmic heating for concentration of milk.

The concentration of milk through evaporation is the most commonly employed unit operation for the production of a wide array of traditional and industrial dairy products. Major problems associated with thermal evaporation are a loss of aroma, flavor and color change. Ohmic heating (OH) has an immense potential for rapid and uniform heating of liquid, semi-solid and particulate foods, yielding microbiologically safe and high-quality product. The effect of ohmic heating on physico-chemical, rheological, sensorial and microbial properties during concentration of cow milk, buffalo milk and mixed milk (50:50) was studied and compared to conventional evaporation. OH significantly increased free fatty acids (FFA), apparent viscosity, hydroxymethylfurfural (HMF) content, instrumental color values i.e. redness (a*) and yellowness (b*) values. However, pH value and whiteness (L*) of the concentrated milk decreased significantly. OH caused a drastic reduction in microbiological counts and treated milk can be kept for a longer period.

Effect of change in pH of skim milk and ultrafiltered/diafiltered retentates on milk protein concentrate (MPC70) powder properties.

Poor solubility of milk protein concentrate (MPC) powders are attributed to their high protein and calcium contents. Concentration of skim milk in ultrafiltration (UF) and diafiltration (DF) increased total solids, protein and mineral contents and changed pH and ζ-potential values of the retentates that leads to milk proteins destabilization in 7× UF/DF retentates. Hence, this investigation was aimed to study the effect of change in pH of skim milk (no change; native pH maintained) and DF retentates (5.85 and 7.10) with KOH, NaOH and NaH2PO4∙2H2O on physicochemical, reconstitution, functional and rheological properties of fresh MPC70 powders. MPC70-7.10 powder had significantly higher (P < 0.05) solubility, but MPC70-NaOH and MPC70-5.85 showed significantly lower solubility than control. However, after two months storage at 25 ± 1 °C, control powder had significantly lower solubility (27.78% decrease) than treated powders. These changes in pH, significantly decreased calcium content and specific surface area; significantly improved viscosity, water binding, oil binding, emulsifying, foaming and buffering capacities, L*, a*, flowability, pH (except MPC70-5.85) and packed bulk density (except MPC70-NaOH) of treated powders over control. However, rennet coagulation time of all reconstituted powder solutions was similar. Hershel Bulkley, a best fit model, efficiently explained the pseudoplastic rheological behavior of all reconstituted MPC70 powders. This investigation had established that change in pH could improve the functional properties of MPC70 powders and is a simple, cheap, compatible and easy to use approach. Treated MPC70 powders could replace control in several food formulations owing to their improved functional properties.

Effect of pH adjustment, homogenization and diafiltration on physicochemical, reconstitution, functional and rheological properties of medium protein milk protein concentrates (MPC70).

Poor solubility is the major limiting factor in commercial applications of milk protein concentrates (MPC) powders. Retentate treatments such as pH adjustment using disodium phosphate (Na2HPO4), also responsible for calcium chelation with homogenization and; its diafiltration with 150 mM NaCl solution were hypothesized to improve the functional properties of treated MPC70 powders. These treatments significantly improved the solubility, heat stability, water binding, dispersibility, bulk density, flowability, buffer index, foaming and emulsifying capacity of treated powders over control. Rheological behaviour of reconstituted MPC solutions was best explained by Herschel Bulkley model. Compared to rough, large globular structures with dents in control; majorly intact, separate, smaller particles of smooth surface, without any aggregation were observed in SEM micrograph of treated powders. Applied treatments are easy, cost-effective and capable to improve functional properties of treated powders that could replace control MPC70 powder in various food applications where protein functionality is of prime importance.

Milk protein concentrates: opportunities and challenges.

Poor solubility of milk protein concentrates (MPCs) is a key deterrent factor in their wider applications in the food industry as compared to other protein-rich dried products such as casein, caseinates and whey protein concentrates and isolates. Apart from the processing factors, the protein content of a MPC also decides its solubility. Solubility is a pre-requisite property of MPCs on which its other functional properties are majorly depended. Further, there is a confusion about the term MPC itself in the literature. An attempt has been made to describe MPC and provide an understanding on the manufacture of MPCs. Further, mechanisms of insolubility, factors affecting solubility of MPCs and an insight into the recently evolved strategies for overcoming the challenges related to their poor heat stability and solubility have been reviewed. Potential applications of MPC to be utilized as a novel ingredient in food industry are also outlined.

Physico-chemical, functional and rheological properties of milk protein concentrate 60 as affected by disodium phosphate addition, diafiltration and homogenization.

Ultrafiltration and diafiltration of skim milk altered delicate salt equilibrium and composition of 5× UF retentate (5× UFR), and thus adversely affected the reconstitutional and functional properties of milk protein concentrate (MPC) powders. It might be due to interaction and aggregation of proteins during spray drying. Therefore, this study was envisaged to investigate the effect of disodium phosphate (DSP) addition, diafiltration and homogenization of retentates on physico-chemical, functional and rheological properties of MPC60 powders. Solubility of fresh control powder was significantly lower than MPC60-H powder; at par with that of MPC60-DSP and MPC60-Na-K, but remained minimum after 60 days of storage at 25 ± 1 °C. The pH (6.6) adjustment of 5× UFR with DSP, significantly enhanced the dispersability, wettability, specific surface area (SSA), heat coagulation time (HCT), emulsification capacity and stability; buffer index of MPC60-DSP powder over control. Diafiltration of 5× UFR with NaCl and KCl, significantly (P < 0.05) decreased calcium content, but enhanced pH and mineral content of MPC60-Na-K powder. This treatment led to significant improvement in dispersability, SSA, emulsification capacity and stability, HCT and oil binding properties. Flowability, wettability, dispersability, HCT, foaming capacity, emulsification capacity and stability were also improved significantly in MPC60-H powder made from homogenized 5× UFR. Rheological behavior of reconstituted powder samples exhibited pseudoplastic behavior, best explained by Hershel Bulkley model. These MPC60 powders with improved functional properties can be used for the improvement of quality attributes of various food formulations.

Effect of concentration, homogenization and stabilizing salts on heat stability and rheological properties of cow skim milk ultrafiltered retentate.

Ultrafiltration (UF) of skimmed milk altered the composition of UF retentate and decreased the heat stability. Heat stability further reduced upon its subsequent homogenization or diafiltration. Poor heat stability of UF retentate restricts its processing at elevated temperatures. Therefore, this study was aimed to investigate the effect of protein concentration, homogenization and addition of stabilizing salts on the heat stability and rheological properties of UF retentates. Changes in the heat stability of fivefold homogenized UF retentate (5× HUFR) was studied in the pH range of 6.1-7.0. Disodium phosphate and trisodium citrate significantly increased the heat coagulation time (HCT) from 1.45 min (pH 6.41) to 120 min (at pH 6.5, 6.6, 7.0) and 80 min (pH 6.6), respectively. Significant reduction in ζ-potential of UF retentates was observed with an increase in calcium and reduction in pH during UF process. Rheological behaviour of retentates above threefold concentration exhibited Herschel-Bulkley behavior with linear increase in flow behavior index (n). Changes in the viscosity of the homogenized retentates were measured at the respective pH of maximum heat stability as a function of temperature (20-80 °C). Promising approaches that might improve the heat stability, solubility and other functional properties of protein rich powders have been discussed in this article.

Reduction of maillard browning in spray dried low-lactose milk powders due to protein polysaccharide interactions.

Lactose hydrolysed concentrated milk was prepared using ß-galactosidase enzyme (4.76U/mL) with a reaction period of 12 h at 4 °C. Addition of polysaccharides (5 % maltodextrin/ß-cyclodextrin) to concentrated milk either before or after lactose hydrolysis did not result in significant differences (p > 0.05) in degree of hydrolysis (% DH) of lactose and residual lactose content (%). Three different inlet temperatures (165 °C, 175 °C and 185 °C) were used for the preparation of powders which were later characterised based on physico-chemical and maillard browning characteristics. Moisture content, solubility and available lysine content of the powders decreased significantly, whereas, browning parameters i.e., browning index, 5-hydroxymethylfurfural, furosine content increased significantly (p < 0.05) with an increase in inlet air temperature. The powder was finally prepared with 5 % polysaccharide and an inlet air temperature of 185 °C which reduced maillard browning. Protein-polysaccharide interactions were identified using Fourier Transform infrared spectroscopy, fluorescence spectroscopy and determination of free amino groups in the powder samples. Maltodextrin and ß-cyclodextrin containing powder samples exhibited lower free amino groups and higher degree of graft value as compared to control sample which indicated protein-polysaccharide interactions. Results obtained from Fourier Transform infrared spectroscopy also confirmed strong protein-polysaccharide interactions, moreover a significant decrease in fluorescence intensity was also observed in the powder samples. These interactions between the proteins and polysaccharides reduced the maillard browning in powders.

A Metabolomics Approach to Establish the Relationship between the Techno-Functional Properties and Metabolome of Indian Goat Yoghurt.

INTRODUCTION: Goat milk has poorer fermentation characteristics due to the absence or only traces of αs1-casein, due to which goat yoghurt contains a less dense gel structure. Moreover, the fermentation characteristics of the milk vary between the breeds of the same species. Therefore, it becomes imperative to explore a few metabolites which could regulate the techno-functional properties of goat yoghurt. OBJECTIVES: This study was aimed at relating the metabolite profile of yoghurt prepared from milk of Barbari, an indigenous goat breed of India, and its techno-functional properties (firmness, whey syneresis, and flow behaviour) using multivariate data analysis and regression models. RESULTS: Goat yoghurt was prepared with two different total solids (TS) levels (12 and 16%) and cultures, namely, commercial culture comprising a thermophilic yoghurt culture (A) and NCDC-263 comprising a mixed yoghurt culture (B). Results demonstrated a significant difference (p < 0.05) in whey syneresis with the increase in the TS level. Flow behaviour of all yoghurt samples showed a decrease in viscosity with an increase in shear rate, which confirmed its non-Newtonian behaviour and shear thinning nature, whereas frequency sweep confirmed its viscoelastic nature. Firmness was the most affected under the influence of different TS and culture levels. It was higher (p < 0.05) for 16-A, followed by 16-3B, and minimum for 12-2B. GC-MS-based metabolomics of the yoghurt revealed a total of 102 metabolites, out of which 15 metabolites were differentially expressed (p < 0.05), including 2-hydroxyethyl palmitate, alpha-mannobiose, and myo-inositol. Multivariate data analysis revealed clear separation among groups using principal component analysis and several correlations using a correlation heat map. Further, regression analysis exhibited methylamine (0.669) and myo-inositol (0.947) with higher regression coefficients (R2 values) exceeding 0.6, thus demonstrating their significant influence on the techno-functional properties, mainly firmness, of the yogurt. CONCLUSION: In conclusion, A gas chromatography-based metabolomics approach could successfully establish a relationship between the metabolome and the techno-functional properties of the yoghurt.

Valorization of Sour Buttermilk (A Potential Waste Stream): Conversion to Powder Employing Reverse Osmosis and Spray Drying.

Reverse osmosis (RO) is known for the economic dewatering of dairy streams without any change in phase. At the household level, surplus milk is fermented and churned to obtain butter, which is subsequently heated to obtain clarified milk fat (ghee). The production of 1 kg ghee generates 15-20 kg sour buttermilk (SBM) as a by-product that is mostly drained. This causes a loss of milk solids and environmental pollution. The processing, preservation and valorization of SBM are quite challenging because of its low total solids (TS) and pH, poor heat stability and limited shelf life. This investigation aimed to transform SBM into a novel dried dairy ingredient. SBM was thermized, filtered, defatted and concentrated at 35 ± 1 °C, employing RO up to 3.62× (12.86%). The RO concentrate was subsequently converted into sour buttermilk powder (SBMP) by employing spray drying. SBMP was further characterized for its physicochemical, reconstitution and functional properties; rheological and morphological characteristics; and amino acid and fatty acid profiling, along with FTIR and XRD spectra. SBMP was "instant soluble-3 s" and exhibited excellent emulsion stability (80.70%), water binding capacity (4.34 g/g of protein), flowability (28.36°) and antioxidant properties. In nutshell, a process was developed for the valorization of sour buttermilk to a novel dairy ingredient by employing reverse osmosis and a spray-drying process.

Growth Characteristics Modeling of Mixed Culture of Bifidobacterium bifidum and Lactobacillus acidophilus using Response Surface Methodology and Artificial Neural Network

Different culture conditions viz. additional carbon and nitrogen content, inoculum size and age, temperature and pH of the mixed culture of Bifidobacterium bifidum and Lactobacillus acidophilus were optimized using response surface methodology (RSM) and artificial neural network (ANN). Kinetic growth models were fitted for the cultivations using a Fractional Factorial (FF) design experiments for different variables. This novel concept of combining the optimization and modeling presented different optimal conditions for the mixture of B. bifidum and L. acidophilus growth from their one variable at-a-time (OVAT) optimization study. Through these statistical tools, the product yield (cell mass) of the mixture of B. bifidum and L. acidophilus was increased. Regression coefficients (R2) of both the statistical tools predicted that ANN was better than RSM and the regression equation was solved with the help of genetic algorithms (GA). The normalized percentage mean squared error obtained from the ANN and RSM models were 0.08 and 0.3%, respectively. The optimum conditions for the maximum biomass yield were at temperature 38°C, pH 6.5, inoculum volume 1.60 mL, inoculum age 30 h, carbon content 42.31% (w/v), and nitrogen content 14.20% (w/v). The results demonstrated a higher prediction accuracy of ANN compared to RSM.