Crystal structure of the pristine peroxidase ferryl center and its relevance to proton-coupled electron transfer.

The reaction of peroxides with peroxidases oxidizes the heme iron from Fe(III) to Fe(IV)=O and a porphyrin or aromatic side chain to a cationic radical. X-ray-generated hydrated electrons rapidly reduce Fe(IV), thereby requiring very short exposures using many crystals, and, even then, some reduction cannot be avoided. The new generation of X-ray free electron lasers capable of generating intense X-rays on the tenths of femtosecond time scale enables structure determination with no reduction or X-ray damage. Here, we report the 1.5-Å crystal structure of cytochrome c peroxidase (CCP) compound I (CmpI) using data obtained with the Stanford Linear Coherent Light Source (LCLS). This structure is consistent with previous structures. Of particular importance is the active site water structure that can mediate the proton transfer reactions required for both CmpI formation and reduction of Fe(IV)=O to Fe(III)-OH. The structures indicate that a water molecule is ideally positioned to shuttle protons between an iron-linked oxygen and the active site catalytic His. We therefore have carried out both computational and kinetic studies to probe the reduction of Fe(IV)=O. Kinetic solvent isotope experiments show that the transfer of a single proton is critical in the peroxidase rate-limiting step, which is very likely the proton-coupled reduction of Fe(IV)=O to Fe(III)-OH. We also find that the pKa of the catalytic His substantially increases in CmpI, indicating that this active site His is the source of the proton required in the reduction of Fe(IV)=O to Fe(IV)-OH.

Crystal structure of Leishmania major peroxidase and characterization of the compound i tryptophan radical.

The parasitic protozoa Leishmania major produces a peroxidase (L. major peroxidase; LmP) that exhibits activities characteristic of both yeast cytochrome c peroxidase (CCP) and plant cytosolic ascorbate peroxidase (APX). One common feature is a key Trp residue, Trp(208) in LmP and Trp(191) in CCP, that is situated adjacent to the proximal His heme ligand in CCP, APX, and LmP. In CCP, Trp(191) forms a stable cationic radical after reaction with H(2)O(2) to form Compound I; in APX, the radical is located on the porphyrin ring. In order to clarify the role of Trp(208) in LmP and to further probe peroxidase structure-function relationships, we have determined the crystal structure of LmP and have studied the role of Trp(208) using electron paramagnetic resonance spectroscopy (EPR), mutagenesis, and enzyme kinetics. Both CCP and LmP have an extended section of ß structure near Trp(191) and Trp(208), respectively, which is absent in APX. This region provides stability to the Trp(191) radical in CCP. EPR of LmP Compound I exhibits an intense and stable signal similar to CCP Compound I. In the LmP W208F mutant, this signal disappears, indicating that Trp(208) forms a stable cationic radical. In LmP conversion of the Cys(197) to Thr significantly weakens the Compound I EPR signal and dramatically lowers enzyme activity. These results further support the view that modulation of the local electrostatic environment controls the stability of the Trp radical in peroxidases. Our results also suggest that the biological role of LmP is to function as a cytochrome c peroxidase.

Geometric and electronic structures of the His-Fe(IV)=O and His-Fe(IV)-Tyr hemes of MauG.

Biosynthesis of the tryptophan tryptophylquinone (TTQ) cofactor activates the enzyme methylamine dehydrogenase. The diheme enzyme MauG catalyzes O-atom insertion and cross-linking of two Trp residues to complete TTQ synthesis. Solution optical and Mössbauer spectroscopic studies have indicated that the reactive form of MauG during turnover is an unusual bisFe(IV) intermediate, which has been formulated as a His-ligated ferryl heme [Fe(IV)=O] (heme A), and an Fe(IV) heme with an atypical His/Tyr ligation (heme B). In this study, Fe K-edge X-ray absorption spectroscopy and extended X-ray absorption fine structure studies have been combined with density functional theory (DFT) and time-dependent DFT methods to solve the geometric and electronic structures of each heme site in the MauG bisFe(IV) redox state. The ferryl heme site (heme A) is compared with the well-characterized compound I intermediate of cytochrome c peroxidase. Heme B is unprecedented in biology, and is shown to have a six-coordinate, S = 1 environment, with a short (1.85-Å) Fe-O(Tyr) bond. Experimentally calibrated DFT calculations are used to reveal a strong covalent interaction between the Fe and the O(Tyr) ligand of heme B in the high-valence form. A large change in the Fe-O(Tyr) bond distance on going from Fe(II) (2.02 Å) to Fe(III) (1.89 Å) to Fe(IV) (1.85 Å) signifies increasing localization of spin density on the tyrosinate ligand upon sequential oxidation of heme B to Fe(IV). As such, O(Tyr) plays an active role in attaining and stabilizing the MauG bisFe(IV) redox state.

Using molecular dynamics to probe the structural basis for enhanced stability in thermal stable cytochromes P450.

High-temperature molecular dynamics (MD) has been used to assess if MD can be employed as a useful tool for probing the structural basis for enhanced stability in thermal stable cytochromes P450. CYP119, the most thermal stable P450 known, unfolds more slowly during 500 K MD simulations than P450s that melt at lower temperatures, P450cam and P450cin. A comparison of the 500 K MD trajectories shows that the Cys ligand loop, a critically important structural feature just under the heme, in both P450cin and P450cam completely unfolds while this region is quite stable in CYP119. In CYP119, this region is stabilized by tight nonpolar interactions involving Tyr26 and Leu308. The corresponding residues in P450cam are Gly and Thr, respectively. The in silico generated Y26A/L308A CYP119 double mutant is substantially less stable than wild-type CYP119, and the Cys ligand loop unfolds in a manner similar to that of P450cam. The MD thus has identified a potential "hot spot" important for stability. As an experimental test of the MD results, the Y26A/L308A double mutant was prepared, and thermal melting curves show that the double mutant exhibits a melting temperature (T(m)) 16 degrees C lower than that of wild-type CYP119. Control mutations that were predicted by MD not to destabilize the protein were also generated, and the experimental melting temperature was not significantly different from that of the wild-type enzyme. Therefore, high-temperature MD is a useful tool in predicting the structural underpinnings of thermal stability in P450s.

Crystallographic and single-crystal spectral analysis of the peroxidase ferryl intermediate.

The ferryl [Fe(IV)O] intermediate is important in many heme enzymes, and thus, the precise nature of the Fe(IV)-O bond is critical in understanding enzymatic mechanisms. The 1.40 A crystal structure of cytochrome c peroxidase Compound I has been determined as a function of X-ray dose while the visible spectrum was being monitored. The Fe-O bond increases in length from 1.73 A in the low-X-ray dose structure to 1.90 A in the high-dose structure. The low-dose structure correlates well with an Fe(IV) horizontal lineO bond, while we postulate that the high-dose structure is the cryo-trapped Fe(III)-OH species previously thought to be an Fe(IV)-OH species.

Characterisation of the electron transfer and complex formation between flavodoxin from D. vulgaris and the haem domain of cytochrome P450 BM3 from B. megaterium.

Investigation of the complex formation and electron transfer kinetics between P450 BMP and flavodoxin was carried out following the suggested involvement of flavodoxin in modulating the electron transfer to BMP in artificial redox chains bound to an electrode surface. While electron transfer measurements show the formation of a tightly bound complex, the NMR data indicate the formation of shortly lived complexes. The measured k(obs) ranged from 24.2 s(-1) to 44.1 s(-1) with k(on) ranging from 0.07 x 10(6) to 1.1 x 10(6) s(-1) M(-1) and K(d) ranging from 300 microM to 24 microM in buffers of different ionic strength. This apparent contradiction is due to the existence of two events in the complex formation prior to electron transfer. A stable complex is initially formed. Within such tightly bound complex, flavodoxin rocks rapidly between different positions. The rocking of the bound flavodoxin between several different orientations gives rise to the transient complexes in fast exchange as observed in the NMR experiments. Docking simulations with two different approaches support the theory that there is no highly specific orientation in the complex, but instead one side of the flavodoxin binds the P450 with high overall affinity but with a number of different orientations. The level of functionality of each orientation is dependent on the distance between cofactors, which can vary between 8 and 25 A, with some of the transient complexes showing distances compatible with the measured electron transfer rate constants.

DevS oxy complex stability identifies this heme protein as a gas sensor in Mycobacterium tuberculosis dormancy.

DevS is one of the two sensing kinases responsible for DevR activation and the subsequent entry of Mycobacterium tuberculosis into dormancy. Full-length wild-type DevS forms a stable oxy-ferrous complex. The DevS autoxidation rates are extremely low (half-lives of >24 h) in the presence of cations such as K(+), Na(+), Mg(2+), and Ca(2+). At relatively high concentrations (100 mM), Cu(2+) accelerates autoxidation more than 1500-fold. Contrary to expectations, removal of the key hydrogen bond between the iron-coordinated oxygen and Tyr171 in the Y171F mutant provides a protein of comparable stability to autoxidation and similar oxygen dissociation rate. This correlates with our earlier finding that the Y171F mutant and wild-type kinase activities are similarly regulated by the binding of oxygen: namely, the ferrous five-coordinate complex is active, whereas the oxy-ferrous six-coordinate species is inactive. Our results indicate that DevS is a gas sensor in vivo rather than a redox sensor and that the stability of its ferrous-oxy complex is enhanced by interdomain interactions.

Engineering ascorbate peroxidase activity into cytochrome c peroxidase.

Cytochrome c peroxidase (CCP) and ascorbate peroxidase (APX) have very similar structures, and yet neither CCP nor APX exhibits each other's activities with respect to reducing substrates. APX has a unique substrate binding site near the heme propionates where ascorbate H-bonds with a surface Arg and one heme propionate (Sharp et al. (2003) Nat. Struct. Biol. 10, 303-307). The corresponding region in CCP has a much longer surface loop, and the critical Arg residue that is required for ascorbate binding in APX is Asn in CCP. In order to convert CCP into an APX, the ascorbate-binding loop and critical arginine were engineered into CCP to give the CCP2APX mutant. The mutant crystal structure shows that the engineered site is nearly identical to that found in APX. While wild-type CCP shows no APX activity, CCP2APX catalyzes the peroxidation of ascorbate at a rate of approximately 12 min (-1), indicating that the engineered ascorbate-binding loop can bind ascorbate.

Improving catalytic properties of P450 BM3 haem domain electrodes by molecular Lego.

In this work the catalytic properties of a cytochrome P450 immobilised onto an electrode surface are improved by means of the molecular Lego approach.

Molecular Lego: design of molecular assemblies of P450 enzymes for nanobiotechnology.

This paper reports on the application of the molecular Lego approach to P450 enzymes. Protein domains are used as catalytic (P450 BM3 haem domain and human P450 2E1) or electron transfer (flavodoxin and P450 BM3 reductase) modules. The objectives are to build assemblies with improved electrochemical properties, to construct soluble human P450 enzymes, and to generate libraries of new P450 catalytic modules based on P450 BM3. A rationally designed, gene-fused assembly (BMP-FLD) was obtained from the soluble haem domain of cytochrome P450 BM3 from Bacillus megaterium (BMP) and flavodoxin from Desulfovibrio vulgaris (FLD). The assembly was expressed successfully and characterised in its active form, displaying improved electrochemical properties. Solubilisation of the human, membrane-bound P450 2E1 (2E1) was achieved by fusing key elements of the 2E1 enzyme with selected parts of P450 BM3. An assembly containing the first 54 residues of P450 BM3, the whole sequence of P450 2E1 from residue 81 and the reductase domain of P450 BM3 was constructed. The 2E1-BM3 assembly was successfully expressed in the cytosol of Escherichia coli. The soluble form of 2E1-BM3 was reduced in carbon monoxide atmosphere and displayed the typical absorption peak at 450 nm, characteristic of a folded and active P450 enzyme. Finally, the alkali method previously developed in this laboratory was used to screen for P450 activity within a library of random mutants of P450 BM3. A number of variants active towards non-physiological substrates, such as pesticides and polyaromatic hydrocarbons were identified, providing new P450 catalytic modules. The combination of these three areas of research provide interesting tools for exploitation in nanobiotechnology.

The critical role of substrate-protein hydrogen bonding in the control of regioselective hydroxylation in p450cin.

Cytochrome P450cin (CYP176A1) is a bacterial P450 isolated from Citrobacter braakii that catalyzes the hydroxylation of cineole to (S)-6beta-hydroxycineole. This initiates the biodegradation of cineole, enabling C. braakii to live on cineole as its sole source of carbon and energy. P450cin lacks the almost universally conserved threonine residue believed to be involved in dioxygen activation and instead contains an asparagine at this position (Asn-242). To investigate the role of Asn-242 in P450cin catalysis, it was converted to alanine, and the resultant mutant was characterized. The characteristic CO-bound spectrum and spectrally determined K(D) for substrate binding were unchanged in the mutant. The x-ray crystal structures of the substrate-free and -bound N242A mutant were determined and show that the only significant change is in a reorientation of the substrate such that (R)-6alpha-hydroxycineole should be a major product. Molecular dynamics simulations of both wild type and mutant are consistent with the change in regio- and stereoselectivity predicted from the crystal structure. The mutation has only a modest effect on enzyme activity and on the diversion of the NADPH-reducing equivalent toward unproductive peroxide formation. Product profile analysis shows that (R)-6alpha-hydroxycineole is the main product, which is consistent with the crystal structure. These results demonstrate that Asn-242 is not a functional replacement for the conserved threonine in other P450s but, rather, is critical in controlling regioselective substrate oxidation.

Evolutionary history of a specialized p450 propane monooxygenase.

The evolutionary pressures that shaped the specificity and catalytic efficiency of enzymes can only be speculated. While directed evolution experiments show that new functions can be acquired under positive selection with few mutations, the role of negative selection in eliminating undesired activities and achieving high specificity remains unclear. Here we examine intermediates along the 'lineage' from a naturally occurring C12-C20 fatty acid hydroxylase (P450BM3) to a laboratory-evolved P450 propane monooxygenase (P450PMO) having 20 heme domain substitutions compared to P450BM3. Biochemical, crystallographic, and computational analyses show that a minimal perturbation of the P450BM3 fold and substrate-binding pocket accompanies a significant broadening of enzyme substrate range and the emergence of propane activity. In contrast, refinement of the enzyme catalytic efficiency for propane oxidation (approximately 9000-fold increase in kcat/Km) involves profound reshaping and partitioning of the substrate access pathway. Remodeling of the substrate-recognition mechanisms ultimately results in remarkable narrowing of the substrate profile around propane and enables the acquisition of a basal iodomethane dehalogenase activity as yet unknown in natural alkane monooxygenases. A highly destabilizing L188P substitution in a region of the enzyme that undergoes a large conformational change during catalysis plays an important role in adaptation to the gaseous alkane. This work demonstrates that positive selection alone is sufficient to completely respecialize the cytochrome P450 for function on a nonnative substrate.

Diatomic ligand discrimination by the heme oxygenases from Neisseria meningitidis and Pseudomonas aeruginosa.

Heme oxygenases have an increased binding affinity for O2 relative to CO. Such discrimination is critical to the function of HO enzymes because one of the main products of heme catabolism is CO. Kinetic studies of mammalian and bacterial HO proteins reveal a significant decrease in the dissociation rate of O2 relative to other heme proteins such as myoglobin. Here we report the kinetic rate constants for the binding of O2 and CO by the heme oxygenases from Neisseria meningitidis (nmHO) and Pseudomonas aeruginosa (paHO). A combination of stopped-flow kinetic and laser flash photolysis experiments reveal that nmHO and paHO both maintain a similar degree of ligand discrimination as mammalian HO-1 and the HO from Corynebacterium diphtheriae. However, in addition to the observed decrease in dissociation rate for O2 by both nmHO and paHO, kinetic analyses show an increase in dissociation rate for CO by these two enzymes. The crystal structures of nmHO and paHO both contain significant differences from the mammalian HO-1 and bacterial C. diphtheriae HO structures, which suggests a structural basis for ligand discrimination in nmHO and paHO.

Crystal structure of P450cin in a complex with its substrate, 1,8-cineole, a close structural homologue to D-camphor, the substrate for P450cam.

Cytochrome P450cin catalyzes the monooxygenation of 1,8-cineole, which is structurally very similar to d-camphor, the substrate for the most thoroughly investigated cytochrome P450, cytochrome P450cam. Both 1,8-cineole and d-camphor are C(10) monoterpenes containing a single oxygen atom with very similar molecular volumes. The cytochrome P450cin-substrate complex crystal structure has been solved to 1.7 A resolution and compared with that of cytochrome P450cam. Despite the similarity in substrates, the active site of cytochrome P450cin is substantially different from that of cytochrome P450cam in that the B' helix, essential for substrate binding in many cytochrome P450s including cytochrome P450cam, is replaced by an ordered loop that results in substantial changes in active site topography. In addition, cytochrome P450cin does not have the conserved threonine, Thr252 in cytochrome P450cam, which is generally considered as an integral part of the proton shuttle machinery required for oxygen activation. Instead, the analogous residue in cytochrome P450cin is Asn242, which provides the only direct protein H-bonding interaction with the substrate. Cytochrome P450cin uses a flavodoxin-like redox partner to reduce the heme iron rather than the more traditional ferredoxin-like Fe(2)S(2) redox partner used by cytochrome P450cam and many other bacterial P450s. It thus might be expected that the redox partner docking site of cytochrome P450cin would resemble that of cytochrome P450BM3, which also uses a flavodoxin-like redox partner. Nevertheless, the putative docking site topography more closely resembles cytochrome P450cam than cytochrome P450BM3.