Widespread Pesticide Distribution in the European Atmosphere Questions their Degradability in Air.

Risk assessment of pesticide impacts on remote ecosystems makes use of model-estimated degradation in air. Recent studies suggest these degradation rates to be overestimated, questioning current pesticide regulation. Here, we investigated the concentrations of 76 pesticides in Europe at 29 rural, coastal, mountain, and polar sites during the agricultural application season. Overall, 58 pesticides were observed in the European atmosphere. Low spatial variation of 7 pesticides suggests continental-scale atmospheric dispersal. Based on concentrations in free tropospheric air and at Arctic sites, 22 pesticides were identified to be prone to long-range atmospheric transport, which included 15 substances approved for agricultural use in Europe and 7 banned ones. Comparison between concentrations at remote sites and those found at pesticide source areas suggests long atmospheric lifetimes of atrazine, cyprodinil, spiroxamine, tebuconazole, terbuthylazine, and thiacloprid. In general, our findings suggest that atmospheric transport and persistence of pesticides have been underestimated and that their risk assessment needs to be improved.

Development of a supramolecular solvent-based extraction method for application to quantitative analyses of a wide range of organic contaminants in indoor dust.

This study investigates the efficacy of supramolecular solvent (SUPRAS) in extracting a diverse spectrum of organic contaminants from indoor dust. Initially, seven distinct SUPRAS were assessed across nine categories of contaminants to identify the most effective one. A SUPRAS comprising Milli-Q water, tetrahydrofuran, and hexanol in a 70:20:10 ratio, respectively, demonstrated the best extraction performance and was employed for testing a wider array of organic contaminants. Furthermore, we applied the selected SUPRAS for the extraction of organic compounds from the NIST Standard Reference Material (SRM) 2585. In parallel, we performed the extraction of NIST SRM 2585 with conventional extraction methods using hexane:acetone (1:1) for non-polar contaminants and methanol (100%) extraction for polar contaminants. Analysis from two independent laboratories (in Norway and the Czech Republic) demonstrated the viability of SUPRAS for the simultaneous extraction of twelve groups of organic contaminants with a broad range of physico-chemical properties including plastic additives, pesticides, and combustion by-products. However, caution is advised when employing SUPRAS for highly polar contaminants like current-use pesticides or volatile substances like naphthalene.

Has Regulatory Action Reduced Human Exposure to Flame Retardants?

Flame retardant (FR) exposure has been linked to several environmental and human health effects. Because of this, the production and use of several FRs are regulated globally. We reviewed the available records of polybrominated diphenyl ethers (PBDEs) and hexabromocyclododecanes (HBCDDs) in human breast milk from literature to evaluate the efficacy of regulation to reduce the exposure of FRs to humans. Two-hundred and seven studies were used for analyses to determine the spatial and temporal trends of FR exposure. North America consistently had the highest concentrations of PBDEs, while Asia and Oceania dominated HBCDD exposure. BDE-49 and -99 indicated decreasing temporal trends in most regions. BDE-153, with a longer half-life than the aforementioned isomers, typically exhibited a plateau in breast milk levels. No conclusive trend could be established for HBCDD, and insufficient information was available to determine a temporal trend for BDE-209. Breakpoint analyses indicated a significant decrease in BDE-47 and -99 in Europe around the time that regulation has been implemented, suggesting a positive effect of regulation on FR exposure. However, very few studies have been conducted globally (specifically in North America) after 2013, during the time when the most recent regulations have been implemented. This meta-analysis provides insight into global trends in human exposure to PBDEs and HBCDD, but the remaining uncertainty highlights the need for ongoing evaluation and monitoring, even after a compound group is regulated.

Accessibility investigation of semi-volatile organic compounds in indoor dust estimated by multi-ratio equilibrium passive sampling.

Many semi-volatile organic compounds (SVOCs) accumulate in indoor dust, which serves as a repository for those compounds. The presence of SVOCs in indoor environments is of concern because many of them are suspected to have toxic effects. Total SVOC concentrations in the dust are generally used for exposure assessment to indoor contaminants, assuming that 100% of the SVOCs is accessible for human uptake. However, such an assumption may potentially lead to an overestimated risk related to dust exposure. We applied a multi-ratio equilibrium passive sampling (MR-EPS) for estimation of SVOC accessibility in indoor settled dust using silicone passive samplers and three particle size dust fractions, <0.25 mm, 0.25-0.5 mm, and 1-2 mm in dry and wet conditions. Equilibrations were performed at various sampler-dust mass ratios to achieve different degrees of SVOC depletion, allowing the construction of a desorption isotherm. The desorption isotherms provided accessible fractions (FAS), equivalent air concentrations (CAIR), dust-air partition coefficients (KDUST-AIR) and organic carbon-air partition coefficients (KOC-AIR). The highest FAS were observed in the <0.25 mm dust fraction in wet conditions which is relevant for exposure assessment via oral ingestion. The highest CAIR were estimated for several organophosphorus flame retardants (OPFRs), polycyclic aromatic hydrocarbons (PAHs) and synthetic musks. The logKOC-AIR did not differ between dust particle sizes in dry and wet conditions but within compound groups, different relationships with hydrophobicity were observed. Equivalent lipid-based concentrations (CL⇌DUST) calculated using available lipid-silicone partition coefficients (KLIP-SIL) were compared with lipid-based concentrations (CL) measured in human-related samples collected from Europeans. For hexachlorobenzene (HCB), CL⇌DUST, and CL were similar, indicating equilibrium attainment between environment and human samples. Lipid-based concentrations for persistent legacy contaminants were also similar but lower for PBDEs in human samples. Overall, accessibility estimation using MR-EPS in dust further contributes to human risk assessment.

Persistent Problem: Global Challenges to Managing PCBs.

Polychlorinated biphenyls (PCBs), "famous" as persistent organic pollutants (POPs), have been managed nationally since the 1970s and globally under the Stockholm Convention on POPs since 2004, requiring environmentally sound management (ESM) of PCBs by 2028. At most, 30% of countries are on track to achieve ESM by 2028. Globally over 10 million tonnes of PCB-containing materials remain, mostly in countries lacking the ability to manage PCB waste. Canada (Ontario) and Czechia, both parties to the Stockholm Convention, are close to achieving the 2028 goal, having reduced their stocks of pure PCBs by 99% in the past 10 years. In contrast, the USA, not a party to the Stockholm Convention, continues to have a substantial but poorly inventoried stock of PCBs and only ∼3% decrease in mass of PCBs since 2006. PCB management, which depends on Stockholm Convention support and national compliance, portends major challenges for POP management. The failure to manage global PCB stocks >30 years after the end of production highlights the urgent need to prioritize reducing production and use of newer, more widely distributed POPs such as chlorinated paraffins and per- and polyfluorinated alkyl substances, as these management challenges are unlikely to be resolved in the coming decades.

Personal care product use and lifestyle affect phthalate and DINCH metabolite levels in teenagers and young adults.

Humans are widely exposed to phthalates and their novel substitutes, and considering the negative health effects associated with some phthalates, it is crucial to understand population levels and exposure determinants. This study is focused on 300 urine samples from teenagers (aged 12-17) and 300 from young adults (aged 18-37) living in Czechia collected in 2019 and 2020 to assess 17 plasticizer metabolites as biomarkers of exposure. We identified widespread phthalate exposure in the study population. The diethyl phthalate metabolite monoethyl phthalate (MEP) and three di (2-ethylhexyl) phthalate metabolites were detected in the urine of >99% of study participants. The highest median concentrations were found for metabolites of low-molecular-weight (LMW) phthalates: mono-n-butyl phthalate (MnBP), monoisobutyl phthalate (MiBP) and MEP (60.7; 52.6 and 17.6 µg/L in young adults). 1,2-cyclohexanedicarboxylic acid diisononyl ester (DINCH) metabolites were present in 68.2% of the samples with a median of 1.24 µg/L for both cohorts. Concentrations of MnBP and MiBP were similar to other European populations, but 5-6 times higher than in populations in North America. We also observed large variability in phthalate exposures within the study population, with 2-3 orders of magnitude differences in urinary metabolites between high and low exposed individuals. The concentrations varied with season, gender, age, and lifestyle factors. A relationship was found between high levels of MEP and high overall use of personal care products (PCPs). Cluster analysis suggested that phthalate exposures depend on season and multiple lifestyle factors, like time spent indoors and use of PCPs, which combine to lead to the observed widespread presence of phthalate metabolites in both study populations. Participants who spent more time indoors, particularly noticeably during colder months, had higher levels of high-molecular weight phthalate metabolites, whereas participants with higher PCP use, particularly women, tended to have higher concentration of LMW phthalate metabolites.

Global intercomparison of polyurethane foam passive air samplers evaluating sources of variability in SVOC measurements.

Polyurethane foam passive air samplers (PUF-PAS) are the most common type of passive air sampler used for a range of semi-volatile organic compounds (SVOCs), including regulated persistent organic pollutants (POPs) and polycyclic aromatic hydrocarbons (PAHs), and emerging contaminants (e.g., novel flame retardants, phthalates, current-use pesticides). Data from PUF-PAS are key indicators of effectiveness of global regulatory actions on SVOCs, such as the Global Monitoring Plan of the Stockholm Convention on Persistent Organic Pollutants. While most PUF-PAS use similar double-dome metal shielding, there is no standardized dome size, shape, or deployment configuration, with many different PUF-PAS designs used in regional and global monitoring. Yet, no information is available on the comparability of data from studies using different PUF-PAS designs. We brought together 12 types of PUF-PAS used by different research groups around the world and deployed them in a multi-part intercomparison to evaluate the variability in reported concentrations introduced by different elements of PAS monitoring. PUF-PAS were deployed for 3 months in outdoor air in Kjeller, Norway in 2015-2016 in three phases to capture (1) the influence of sampler design on data comparability, (2) the influence of analytical variability when samplers are analyzed at different laboratories, and (3) the overall variability in global monitoring data introduced by differences in sampler configurations and analytical methods. Results indicate that while differences in sampler design (in particular, the spacing between the upper and lower sampler bowls) account for up to 50 % differences in masses collected by samplers, the variability introduced by analysis in different laboratories far exceeds this amount, resulting in differences spanning orders of magnitude for POPs and PAHs. The high level of variability due to analysis in different laboratories indicates that current SVOC air sampling data (i.e., not just for PUF-PAS but likely also for active air sampling) are not directly comparable between laboratories/monitoring programs. To support on-going efforts to mobilize more SVOC data to contribute to effectiveness evaluation, intercalibration exercises to account for uncertainties in air sampling, repeated at regular intervals, must be established to ensure analytical comparability and avoid biases in global-scale assessments of SVOCs in air caused by differences in laboratory performance.

Challenges in the Analysis of Novel Flame Retardants in Indoor Dust: Results of the INTERFLAB 2 Interlaboratory Evaluation.

The Interlaboratory Study of Novel Flame Retardants (INTERFLAB 2) was conducted by 20 laboratories in 12 countries to test the precision and accuracy of the analysis of 24 "novel" flame retardants (NFRs). Laboratories analyzed NFRs in injection-ready test mixtures, in extracts of residential dust, and in residential dust to evaluate the influence of dust handling and extraction. For test mixtures, mean reported concentrations of PBT, PBEB, EH-TBB, TBBPA, TBDP-TAZTO, TBOEP, α-TBCO, ß-DBE-DBCH, and total HBCDD differed by >25% relative to reference values. Coefficients of variation were higher in dusts/dust extracts than in test mixtures. Concentrations among laboratories ranged over 3-4 orders of magnitude for HBB, TBP-DBPE, TBP-AE, and TDCIPP in dust extracts and dusts. Most laboratories produced repeatable dust concentrations, but differences reported in the literature among laboratories of <70% could be due to analytical variability, and the attribution of such differences to other causes should be made with caution. Most variations in accuracy and precision were introduced by matrix effects and/or sample processing, rather than instrumental analysis. We recommend recovery correction to improve accuracy. There is a need to improve analytical methods and to validate methods on complex matrices such as standard reference materials for dust or spiked matrices.

Characterizing Spatial Diversity of Passive Sampling Sites for Measuring Levels and Trends of Semivolatile Organic Chemicals.

Passive air sampling of semivolatile organic compounds (SVOCs) is a relatively inexpensive method that facilitates extensive campaigns with numerous sampling sites. An important question in the design of passive-sampling networks concerns the number and location of samplers. We investigate this question with the example of 17 SVOCs sampled at 14 background sites across the Czech Republic. More than 200 time series (length 5-11 years) were used to characterize SVOC levels and trends in air between 2003 and 2015. Six polychlorinated biphenyls (PCBs), 6 polyaromatic hydrocarbons (PAHs), and 5 organochlorine pesticides (OCPs) at 14 sites were assessed using data from the MONET passive sampling network. Significant decreases were found for most PCBs and OCPs whereas hexachlorobenzene (HCB) and most PAHs showed (mostly insignificant) increases. Spatial variability was rather low for PCBs and OCPs except for dichlorodiphenyltrichloroethane (DDT) and rather high for PAHs. The variability of the SVOC levels and trends depends on characteristics of the sites including their remoteness, landscape, population, and pollution sources. The sites can be grouped in distinct clusters, which helps to identify similar and, thereby, potentially redundant sites. This information is useful when monitoring networks need to be optimized regarding the location and number of sites.

Tri(2,4-di- t-butylphenyl) Phosphate: A Previously Unrecognized, Abundant, Ubiquitous Pollutant in the Built and Natural Environment.

Using high-resolution mass spectrometry, we identified tri(2,4-di- t-butylphenyl) phosphate (TDTBPP) in e-waste dust. This is a previously unsuspected pollutant that had not been reported before in the environment. To assess its abundance in the environment, we measured its concentration in e-waste dust, house dust, sediment from the Chicago Ship and Sanitary Canal, Indiana Harbor water filters, and filters from high-volume air samplers deployed in Chicago, IL. To provide a context for interpreting these quantitative results, we also measured the concentrations of triphenyl phosphate (TPhP), a structurally similar compound, in these samples. Median concentrations of TDTBPP and TPhP were 14 400 and 41 500 ng/g, respectively, in e-waste dust and 4900 and 2100 ng/g, respectively, in house dust. TDTBPP was detected in sediment, water, and air with median concentrations of 527 ng/g, 3700 pg/L, and 149 pg/m3, respectively. TDTBPP concentrations were generally higher or comparable to those of TPhP in all media analyzed, except for the e-waste dust. Exposure from dust ingestion and dermal absorption in the e-waste recycling facility and in homes was calculated. TDTBPP exposure was 571 ng/kg bw/day in the e-waste recycling facility (pro-rated for an 8-h shift), and 536 ng/kg bw and 7550 ng/kg bw/day for adults and toddlers, respectively, in residential environments.

Alternative Flame Retardant, 2,4,6-Tris(2,4,6-tribromophenoxy)-1,3,5-triazine, in an E-waste Recycling Facility and House Dust in North America.

A high molecular weight compound, 2,4,6-tris(2,4,6-tribromophenoxy)-1,3,5-triazine (TTBP-TAZ), was detected during the analysis of brominated flame retardants in dust samples collected from an electrical and electronic waste (e-waste) recycling facility in Ontario, Canada. Gas chromatography coupled with both high-resolution and low-resolution mass spectrometry (MS) was used to determine TTBP-TAZ's chemical structure and concentrations. To date, TTBP-TAZ has only been detected in plastic casings of electrical and electronic equipment and house dust from The Netherlands. Here we report on the concentrations of TTBP-TAZ in selected samples from North America: e-waste dust ( n = 7) and air ( n = 4), residential dust ( n = 30), and selected outdoor air ( n = 146), precipitation ( n = 19), sediment ( n = 11) and water ( n = 2) samples from the Great Lakes environment. TTBP-TAZ was detected in all the e-waste dust and air samples, and in 70% of residential dust samples. The median concentrations of TTBP-TAZ in these three types of samples were 5540 ng/g, 5.75 ng/m3 and 6.76 ng/g, respectively. The flame retardants 2,4,6-tribromophenol, tris(2,3-dibromopropyl) isocyanurate, and 3,3',5,5'-tetrabromobisphenol A bis(2,3-dibromopropyl) ether, BDE-47 and BDE-209 were also measured for comparison. None of these other flame retardants concentrations was significantly correlated with those of TTBP-TAZ in any of the sample types suggesting different sources. TTBP-TAZ was not detected in any of the outdoor environmental samples, which may relate to its application history and physicochemical properties. This is the first report of TTBP-TAZ in North America.

Changes in Flame Retardant and Legacy Contaminant Concentrations in Indoor Air during Building Construction, Furnishing, and Use.

A newly constructed university building was selected for targeted assessment of changes in the levels of flame retardants and legacy contaminants during the installation of building equipment, furniture, electronics, and first year of building use. Indoor air samples were collected during several periods of intensive equipment installation to determine a relationship between newly introduced equipment and changes in the concentrations and profiles of contaminants in indoor air. Samples were analyzed for polybrominated diphenyl ethers (PBDEs), hexabromocyclododecanes (HBCDDs), and new types of flame retardants: brominated (BFRs) and organophosphate esters (OPEs). Additionally, typical outdoor contaminants such as polychlorinated biphenyls (PCBs) and organochlorine pesticides (OCPs) were also analyzed for comparison. From the set of 90 compounds analyzed here, hexabromobenzene (HBB) and tris(2-chloroisopropyl)phosphate (TCIPP) showed a significant concentration increase in indoor air concentrations during computer installation and operation, suggesting emission by operating computers, while an order of magnitude concentration increase in tris(1,3-dichloro-2-propyl)phosphate (TDCIPP) and tri-m-cresyl phosphate (TMTP) was observed after the furniture and carpet was introduced to the computer room, suggesting furniture or carpet as a source. However, the majority of compounds had no systematic change in concentrations during equipment installation, indicating that no sources of target compounds were introduced or, that source introduction was not reflected in indoor air concentrations. Generally, low levels of legacy flame retardants compared to their novel alternatives were observed.

Interlaboratory study of novel halogenated flame retardants: INTERFLAB.

Flame retardants (FRs) have come under considerable scientific and public scrutiny over the past decade. A lack of reference materials and standardized analytical methods has resulted in questions regarding the variation of measurements from different studies. We evaluated this variation by performing an international interlaboratory study assessing analytical capabilities as well as the accuracy and precision of results for a range of flame retardants (International Flame Retardant Laboratory Study, INTERFLAB). Thirteen international research laboratories participated in a blind interlaboratory comparison of 24 FRs. Results demonstrate good precision within replicates of test mixtures from individual laboratories, but problematic accuracy for several FRs and laboratories. Large ranges in the values reported for decabromodiphenylethane (DBDPE), tris(1,3-dichloropropyl)phosphate (TDCIPP), tetrabromobisphenol-A (TBBPA), and hexabromocyclododecane (HBCD) (>50 % relative standard deviations among measured values) and large deviations from the reference values (>25 % bias in accuracy) suggest potential problems for comparability of results. DBDPE, HBCD, and TBBPA had significantly poorer accuracy and precision, suggesting that current analytical methods are not providing reliable results for these FRs.

Current challenges in air sampling of semivolatile organic contaminants: sampling artifacts and their influence on data comparability.

With current science and policy needs, more attention is being given to expanding and improving air sampling of semivolatile organic contaminants (SVOCs). However, a wide range of techniques and configurations are currently used (active and passive samplers, different deployment times, different sorbents, etc.) and as the SVOC community looks to assess air measurements on a global scale, questions of comparability arise. We review current air sampling techniques, with a focus on sampling artifacts that can lead to uncertainties or biases in reported concentrations, in particular breakthrough, degradation, meteorological influences, and assumptions regarding passive sampling. From this assessment, we estimate the bias introduced for SVOC concentrations from all factors. Due to the effects of breakthrough, degradation, particle fractions and sampler uptake periods, some current passive and active sampler configurations may underestimate certain SVOCs by 30-95%. We then recommend future study design, appropriateness of sampler types for different study goals, and finally, how the SVOC community should move forward in both research and monitoring to best achieve comparability and consistency in air measurements.

Particle size distribution of halogenated flame retardants and implications for atmospheric deposition and transport.

This study investigates the distribution of polybrominated diphenyl ethers (PBDEs), hexabromocyclododecane (HBCD) and a group of novel flame retardants (NFRs) on atmospheric aerosols. Two high volume cascade impactors were used to collect particulate fractions of ambient air over a one year period at urban and rural sites. The majority of FRs were found on the finest aerosols (<0.95 µm). Concentrations of HBCD were higher than those of ΣPBDEs. Moreover, we noted seasonality and spatial differences in particle size distributions, yet a large portion of the observed differences were due to differences in particulate matter (PM) itself. When normalized by PM, the size distributions of the FRs exhibited much greater heterogeneity. Differences existed between the FR distributions by molecular weight, with the higher molecular weight FRs (e.g., BDE-209, Dechlorane Plus) distributed more uniformly across all particulate size fractions. The seasonal, spatial, and compound-specific differences are of crucial importance when estimating dry and wet deposition of FRs as smaller aerosols have longer atmospheric residence times. Estimated wet and dry deposition of four representative FRs (BDE-47, BDE-209, HBCD, and Dechlorane Plus) using size-segregated aerosol data resulted in lower deposition estimates than when bulk aerosol data were used. This has implications for estimates of long-range atmospheric transport and atmospheric residence times, as it suggests that without size-specific distributions, these parameters could be underestimated for FRs.

From the city to the Lake: loadings of PCBs, PBDEs, PAHs and PCMs from Toronto to Lake Ontario.

Loadings from Toronto, Canada to Lake Ontario were quantified and major sources and pathways were identified, with the goal of informing opportunities for loading reductions. The contaminants were polychlorinated biphenyls (PCBs), polybrominated diphenyl ethers (PBDEs), polycyclic aromatic hydrocarbons (PAHs) and polycyclic musks (PCMs). Loadings were calculated from measured concentrations for three major pathways: atmospheric processes, tributary runoff, and wastewater treatment plant (WWTP) effluents. Although atmospheric deposition to the Great Lakes has received the greatest attention, this was the dominant loading pathway for PCBs only (17 ± 5.3 kg/y or 66% of total loadings). PCB loadings reflected elevated urban PCB air concentrations due to, predominantly, primary emissions. These loadings contribute to consumption advisories for nearshore fish. PBDE loadings to the lake, again from mainly primary emissions, were 48% (9.1 ± 1.3 kg/y) and 42% (8.0 ± 5.7 kg/y) via tributaries and WWTPs, respectively, consistent with emissions deposited and subsequently washed-off of urban surfaces and emissions to the sewage system. PAHs loadings of 1600 ± 280 kg/y (71%) from tributaries were strongly associated with vehicle transportation and impervious surfaces. PCM loadings were 83% (±140 kg/y) from WWTP final effluent, reflecting their use in personal care products. Opportunities for source reduction lie in reducing the current inventories of in-use PCBs and PBDE-containing products, reducing vehicle emissions of PAHs and use of PAHs in the transportation network (e.g., pavement sealants), and improving wastewater treatment technology.

Tracking Aromatic Amines from Sources to Surface Waters.

This review examines the environmental occurrence and fate of aromatic amines (AAs), a group of environmental contaminants with possible carcinogenic and mutagenic effects. AAs are known to be partially responsible for the genotoxic traits of industrial wastewater (WW), and AA antioxidants are acutely toxic to some aquatic organisms. Still, there are gaps in the available data on sources, occurrence, transport, and fate in domestic WW and indoor environments, which complicate the prevention of adverse effects in aquatic ecosystems. We review key domestic sources of these compounds, including cigarette smoke and grilled protein-rich foods, and their presence indoors and in aquatic matrices. This provides a basis to evaluate the importance of nonindustrial sources to the overall environmental burden of AAs. Appropriate sampling techniques for AAs are described, including copper-phthalocyanine trisulfonate materials, XAD resins in solid-phase extraction, and solid-phase microextraction methods, which can offer insights into AA sources, transport, and fate. Further discussion is provided on potential progress in the research of AAs and their behavior in an aim to support the development of a more comprehensive understanding of their effects and potential environmental risks.

Endocrine disrupting potential of total and bioaccessible extracts of dust from seven different types of indoor environment.

Information on the indoor environment as a source of exposure with potential adverse health effects is mostly limited to a few pollutant groups and indoor types. This study provides a comprehensive toxicological profile of chemical mixtures associated with dust from various types of indoor environments, namely cars, houses, prefabricated apartments, kindergartens, offices, public spaces, and schools. Organic extracts of two different polarities and bioaccessible extracts mimicking the gastrointestinal conditions were prepared from two different particle size fractions of dust. These extracts were tested on a battery of human cell-based bioassays to assess endocrine disrupting potentials. Furthermore, 155 chemicals from different pollutant groups were measured and their relevance for the bioactivity was determined using concentration addition modelling. The exhaustive and bioaccessible extracts of dust from the different microenvironments interfered with aryl hydrocarbon receptor, estrogen, androgen, glucocorticoid, and thyroid hormone (TH) receptor signalling, and with TH transport. Noteably, bioaccessible extracts from offices and public spaces showed higher estrogenic effects than the organic solvent extracts. 114 of the 155 targeted chemicals were detectable, but the observed bioactivity could be only marginally explained by the detected chemicals. Diverse toxicity patterns across different microenvironments that people inhabit throughout their lifetime indicate potential health and developmental risks, especially for children. Limited data on the endocrine disrupting potency of relevant chemical classes, especially those deployed as replacements for legacy contaminants, requires further study.