RESUMEN
Multiprincipal-element alloys are an enabling class of materials owing to their impressive mechanical and oxidation-resistant properties, especially in extreme environments1,2. Here we develop a new oxide-dispersion-strengthened NiCoCr-based alloy using a model-driven alloy design approach and laser-based additive manufacturing. This oxide-dispersion-strengthened alloy, called GRX-810, uses laser powder bed fusion to disperse nanoscale Y2O3 particles throughout the microstructure without the use of resource-intensive processing steps such as mechanical or in situ alloying3,4. We show the successful incorporation and dispersion of nanoscale oxides throughout the GRX-810 build volume via high-resolution characterization of its microstructure. The mechanical results of GRX-810 show a twofold improvement in strength, over 1,000-fold better creep performance and twofold improvement in oxidation resistance compared with the traditional polycrystalline wrought Ni-based alloys used extensively in additive manufacturing at 1,093 °C5,6. The success of this alloy highlights how model-driven alloy designs can provide superior compositions using far fewer resources compared with the 'trial-and-error' methods of the past. These results showcase how future alloy development that leverages dispersion strengthening combined with additive manufacturing processing can accelerate the discovery of revolutionary materials.
RESUMEN
The 2015 and 2020 ozone holes set record sizes in October-December. We show that these years, as well as other recent large ozone holes, still adhere to a fundamental recovery metric: the later onset of early spring ozone depletion as chlorine and bromine diminishes. This behavior is also captured in the Whole Atmosphere Chemistry Climate Model. We quantify observed recovery trends of the onset of the ozone hole and in the size of the September ozone hole, with good model agreement. A substantial reduction in ozone hole depth during September over the past decade is also seen. Our results indicate that, due to dynamical phenomena, it is likely that large ozone holes will continue to occur intermittently in October-December, but ozone recovery will still be detectable through the later onset, smaller, and less deep September ozone holes: metrics that are governed more by chemical processes.
RESUMEN
Almost all electronic devices utilize a pn junction formed by random doping of donor and acceptor impurity atoms. We developed a fundamentally new type of pn junction not formed by impurity-doping, but rather by grading the composition of a semiconductor nanowire resulting in alternating p and n conducting regions due to polarization charge. By linearly grading AlGaN nanowires from 0% to 100% and back to 0% Al, we show the formation of a polarization-induced pn junction even in the absence of any impurity doping. Since electrons and holes are injected from AlN barriers into quantum disk active regions, graded nanowires allow deep ultraviolet LEDs across the AlGaN band-gap range with electroluminescence observed from 3.4 to 5 eV. Polarization-induced p-type conductivity in nanowires is shown to be possible even without supplemental acceptor doping, demonstrating the advantage of polarization engineering in nanowires compared with planar films and providing a strategy for improving conductivity in wide-band-gap semiconductors. As polarization charge is uniform within each unit cell, polarization-induced conductivity without impurity doping provides a solution to the problem of conductivity uniformity in nanowires and nanoelectronics and opens a new field of polarization engineering in nanostructures that may be applied to other polar semiconductors.
Asunto(s)
Compuestos de Aluminio/química , Galio/química , Luminiscencia , Nanocables/química , Rayos Ultravioleta , Conductividad Eléctrica , ElectroquímicaRESUMEN
Reflecting drug use patterns and criminal justice policies throughout the 1990s and 2000s, prisons hold a disproportionate number of society's drug abusers. Approximately 50% of state prisoners meet the criteria for a diagnosis of drug abuse or dependence, but only 10% receive medically based drug treatment. Because of the link between substance abuse and crime, treating substance abusing and dependent state prisoners while incarcerated has the potential to yield substantial economic benefits. In this paper, we simulate the lifetime costs and benefits of improving prison-based substance abuse treatment and post-release aftercare for a cohort of state prisoners. Our model captures the dynamics of substance abuse as a chronic disease; estimates the benefits of substance abuse treatment over individuals' lifetimes; and tracks the costs of crime and criminal justice costs related to policing, adjudication, and incarceration. We estimate net societal benefits and cost savings to the criminal justice system of the current treatment system and five policy scenarios. We find that four of the five policy scenarios provide positive net societal benefits and cost savings to the criminal justice system relative to the current treatment system. Our study demonstrates the societal gains to improving the drug treatment system for state prisoners.
Asunto(s)
Derecho Penal/organización & administración , Costos de la Atención en Salud/estadística & datos numéricos , Método de Montecarlo , Prisiones/organización & administración , Trastornos Relacionados con Sustancias/economía , Trastornos Relacionados con Sustancias/rehabilitación , Adulto , Factores de Edad , Ahorro de Costo , Análisis Costo-Beneficio , Derecho Penal/economía , Femenino , Humanos , Masculino , Persona de Mediana Edad , Prisiones/economía , Factores Sexuales , Factores Socioeconómicos , Trastornos Relacionados con Sustancias/terapiaRESUMEN
Bottom-up nanostructure assembly has been a central theme of materials synthesis over the past few decades. Semiconductor quantum dots and nanowires provide additional degrees of freedom for charge confinement, strain engineering, and surface sensitivity-properties that are useful to a wide range of solid state optical and electronic technologies. A central challenge is to understand and manipulate nanostructure assembly to reproducibly generate emergent structures with the desired properties. However, progress is hampered due to the interdependence of nucleation and growth phenomena. Here we show that by dynamically adjusting the growth kinetics, it is possible to separate the nucleation and growth processes in spontaneously formed GaN nanowires using a two-step molecular beam epitaxy technique. First, a growth phase diagram for these nanowires is systematically developed, which allows for control of nanowire density over three orders of magnitude. Next, we show that by first nucleating nanowires at a low temperature and then growing them at a higher temperature, height and density can be independently selected while maintaining the target density over long growth times. GaN nanowires prepared using this two-step procedure are overgrown with three-dimensionally layered and topologically complex heterostructures of (GaN/AlN). By adjusting the growth temperature in the second growth step either vertical or coaxial nanowire superlattices can be formed. These results indicate that a two-step method allows access to a variety of kinetics at which nanowire nucleation and adatom mobility are adjustable.
Asunto(s)
Compuestos de Aluminio/química , Cristalización/métodos , Galio/química , Nanoestructuras/química , Nanoestructuras/ultraestructura , Nanotecnología/métodos , Sustancias Macromoleculares/química , Ensayo de Materiales , Conformación Molecular , Tamaño de la Partícula , Propiedades de SuperficieRESUMEN
The mechanisms underlying decadal variability in Arctic sea ice remain actively debated. Here, we show that variability in boreal biomass burning (BB) emissions strongly influences simulated Arctic sea ice on multidecadal time scales. In particular, we find that a strong acceleration in sea ice decline in the early 21st century in the Community Earth System Model version 2 (CESM2) is related to increased variability in prescribed BB emissions in the sixth phase of the Coupled Model Intercomparison Project (CMIP6) through summertime aerosol-cloud interactions. Furthermore, we find that more than half of the reported improvement in sea ice sensitivity to CO2 emissions and global warming from CMIP5 to CMIP6 can be attributed to the increased BB variability, at least in the CESM. These results highlight a new kind of uncertainty that needs to be considered when incorporating new observational data into model forcing while also raising questions about the role of BB emissions on the observed Arctic sea ice loss.
RESUMEN
We use a chemistry-climate model and new estimates of smoke produced by fires in contemporary cities to calculate the impact on stratospheric ozone of a regional nuclear war between developing nuclear states involving 100 Hiroshima-size bombs exploded in cities in the northern subtropics. We find column ozone losses in excess of 20% globally, 25-45% at midlatitudes, and 50-70% at northern high latitudes persisting for 5 years, with substantial losses continuing for 5 additional years. Column ozone amounts remain near or <220 Dobson units at all latitudes even after three years, constituting an extratropical "ozone hole." The resulting increases in UV radiation could impact the biota significantly, including serious consequences for human health. The primary cause for the dramatic and persistent ozone depletion is heating of the stratosphere by smoke, which strongly absorbs solar radiation. The smoke-laden air rises to the upper stratosphere, where removal mechanisms are slow, so that much of the stratosphere is ultimately heated by the localized smoke injections. Higher stratospheric temperatures accelerate catalytic reaction cycles, particularly those of odd-nitrogen, which destroy ozone. In addition, the strong convection created by rising smoke plumes alters the stratospheric circulation, redistributing ozone and the sources of ozone-depleting gases, including N(2)O and chlorofluorocarbons. The ozone losses predicted here are significantly greater than previous "nuclear winter/UV spring" calculations, which did not adequately represent stratospheric plume rise. Our results point to previously unrecognized mechanisms for stratospheric ozone depletion.
Asunto(s)
Modelos Químicos , Guerra Nuclear , Ozono , Movimientos del Aire , Atmósfera , Clorofluorocarburos , Óxidos de Nitrógeno , Humo , Rayos UltravioletaRESUMEN
The angular precision of crystal orientation determination by cross-correlating dynamically simulated electron diffraction patterns with experimental patterns via spherical harmonic analysis is investigated. The best precision found in this study is 0.016°, which approaches the level reported in the literature for other high-precision electron backscatter diffraction implementations. At this angular precision, the noise floor for geometrically necessary dislocation density calculations is found to be approximately 5×1013 m-2 at a 200 nm step size. Conventional Hough-transform indexing of the same raw patterns gave an angular precision of 0.156° and a dislocation noise floor of 6×1014 m-2, an order of magnitude larger for both parameters, albeit better than is typical for Hough indexing due to the high-quality patterns used. Experimental trade-off curves of precision versus exposure time, pattern resolution (i.e. camera binning), and analysis bandwidth are also presented, allowing for optimization of data collection and analysis rates once the desired level of precision has been determined.
RESUMEN
Volcanic ash is often neglected in climate simulations because ash particles are assumed to have a short atmospheric lifetime, and to not participate in sulfur chemistry. After the Mt. Kelut eruption in 2014, stratospheric ash-rich aerosols were observed for months. Here we show that the persistence of super-micron ash is consistent with a density near 0.5 g cm-3, close to pumice. Ash-rich particles dominate the volcanic cloud optical properties for the first 60 days. We also find that the initial SO2 lifetime is determined by SO2 uptake on ash, rather than by reaction with OH as commonly assumed. About 43% more volcanic sulfur is removed from the stratosphere in 2 months with the SO2 heterogeneous chemistry on ash particles than without. This research suggests the need for re-evaluation of factors controlling SO2 lifetime in climate model simulations, and of the impact of volcanic ash on stratospheric chemistry and radiation.
RESUMEN
Shape memory alloys (SMAs), such as Nitinol (i.e., NiTi), are of great importance in biomedical and engineering applications due to their unique superelasticity and shape memory properties. In recent years, additive manufacturing (AM) processes have been used to produce complex NiTi components, which provide the ability to tailor microstructure and thus the critical properties of the alloys, such as the superelastic behavior and transformation temperatures (TTs), by selection of processing parameters. In biomedical applications, superelasticity in implants play a critical role since it gives the implants bone-like behavior. In this study, a methodology of improving superelasticity in Ni-rich NiTi components without the need for any kind of post-process heat treatments will be revealed. It will be shown that superelasticity with 5.62% strain recovery and 98% recovery ratio can be observed in Ni-rich NiTi after the sample is processed with 250 W laser power, 1250 mm/s scanning speed, and 80 µm hatch spacing without, any post-process heat treatments. This superelasticity in as-fabricated Ni-rich SLM NiTi was not previously possible in the absence of post-process heat treatments. The findings of this study promise the fast, reliable and inexpensive fabrication of complex shaped superelastic NiTi components for many envisioned applications such as patient-specific biomedical implants.
RESUMEN
Arteriovenous shunting associated with angiomyolipoma is an unusual entity, which carries important implications to embolization approach. We present a distinctive case involving a 41-year-old woman who presented with retroperitoneal hemorrhage relating to renal angiomyolipoma. During angiography for urgent embolization, a complex vascular supply with arteriovenous shunting was encountered. Superselective embolization using alcohol or small particles is the standard approach to definitive treatment of symptomatic angiomyolipoma; however; their use is precluded in the setting of arteriovenous shunt hemodynamics. In this case, a 2-step approach was employed by which the initial hemorrhage was treated with proximal embolization using large gelatin foam and metallic coils. This resulted in decreased flow through the arteriovenous shunt, allowing the use high viscosity ethylene vinyl alcohol copolymer dissolved in dimethyl sulfoxide for definitive treatment.
RESUMEN
CrCoNi alloy exhibits a remarkable combination of strength and plastic deformation, even superior to the CrMnFeCoNi high-entropy alloy. We connect the magnetic and mechanical properties of CrCoNi, via a magnetically tunable phase transformation. While both alloys crystallize as single-phase face-centered-cubic (fcc) solid solutions, we find a distinctly lower-energy phase in CrCoNi alloy with a hexagonal close-packed (hcp) structure. Comparing the magnetic configurations of CrCoNi with those of other equiatomic ternary derivatives of CrMnFeCoNi confirms that magnetically frustrated Mn eliminates the fcc-hcp energy difference. This highlights the unique combination of chemistry and magnetic properties in CrCoNi, leading to a fcc-hcp phase transformation that occurs only in this alloy, and is triggered by dislocation slip and interaction with internal boundaries. This phase transformation sets CrCoNi apart from the parent quinary, and its other equiatomic ternary derivatives, and provides a new way for increasing strength without compromising plastic deformation.
RESUMEN
The effect of mixed partial occupation of metal sites on the phase stability of the γ-Cr23-xFe x C6 (x = 0-3) carbides is explored as function of composition and temperature. Ab initio calculations combined with statistical thermodynamics approaches reveal that the site occupation of the carbides may be incorrectly predicted when only the commonly used approach of full sublattice occupation is considered. We found that the γ-M23C6 structure can be understood as a familiar sodium chloride structure with positively charged rhombic dodecahedron (M(4a) M12(48h)) and negatively charged cubo-octahedron (M8(32f) C6(24e)) super-ion clusters, together with interstitial metal atoms at the 8c sites. The stability of the partially occupied phase can be easily rationalized on the basis of a super-ion analysis of the carbide phase. This new understanding of γ-M23C6 carbides may facilitate further development of high-chromium heat-resistant steels.
RESUMEN
CONTEXT: Inaccurate and incomplete imaging order information presented to interpreting radiologists is a persistent problem in many radiology settings. Computerized Physician Order Entry processes in clinic-based settings are often inconsistent, and radiology transcription clerks continue to play a critical role in transmitting accurate content and information from referring physician orders to the radiology information system. (RIS) The purpose of this quality improvement project was to a) identify common transcription areas of deficient RIS imaging order information and b) test outcomes from an intervention to improve the content and concordance of transcribed patient information entered into the RIS. METHODS: A random convenience sample of 500 outpatient radiographic orders were categorized according to degree and quality of concordance between the transcribed patient information documented in the RIS and the corresponding original imaging order information. During Phase I, the authors used a root-cause analysis to determine the possible etiologies for discordance between the information in original imaging orders and the information transcribed into the RIS. The intervention that was delivered included a short education session with radiology transcription clerks with placement reminder posters at transcription workstations. During Phase 2, a second random sample was obtained following the intervention, with data collection and analyses replicating the process from Phase I. A set of inferential comparisons were conducted using chi-square tests to examine for statistical significance. RESULTS: There was an overall 44% decrease in transcription discordance (p < 0.001), and the number of cases with perfectly concordant RIS order indication documentations increased by 21% (p < 0.001). A total of 34% of transcriptions from Phase I were partially discordant due to an inadequate imaging study indication, compared to 15% during Phase II (p < 0.001). There was also a 22% increase in the number of completely concordant transcriptions free of grammatical errors (p < 0.001). CONCLUSIONS: A short education session with radiology transcription clerks along with placement of reminder posters may significantly improve both the concordance and quality of transcribed imaging order information presented to interpreting radiologists using the RIS.
RESUMEN
PURPOSE: To estimate the effects of a workplace initiative to reduce work-family conflict on employee performance. DESIGN: A group-randomized multisite controlled experimental study with longitudinal follow-up. SETTING: An information technology firm. PARTICIPANTS: Employees randomized to the intervention (n = 348) and control condition (n = 345). INTERVENTION: An intervention, "Start. Transform. Achieve. Results." to enhance employees' control over their work time, to increase supervisors' support for this change, and to increase employees' and supervisors' focus on results. METHODS: We estimated the effect of the intervention on 9 self-reported employee performance measures using a difference-in-differences approach with generalized linear mixed models. Performance measures included actual and expected hours worked, absenteeism, and presenteeism. RESULTS: This study found little evidence that an intervention targeting work-family conflict affected employee performance. The only significant effect of the intervention was an approximately 1-hour reduction in expected work hours. After Bonferroni correction, the intervention effect is marginally insignificant at 6 months and marginally significant at 12 and 18 months. CONCLUSION: The intervention reduced expected working time by 1 hour per week; effects on most other employee self-reported performance measures were statistically insignificant. When coupled with the other positive wellness and firm outcomes, this intervention may be useful for improving employee perceptions of increased access to personal time or personal wellness without sacrificing performance. The null effects on performance provide countervailing evidence to recent negative press on work-family and flex work initiatives.
Asunto(s)
Salud Laboral , Rendimiento Laboral , Equilibrio entre Vida Personal y Laboral , Lugar de Trabajo/psicología , Absentismo , Familia/psicología , Femenino , Humanos , Masculino , Persona de Mediana Edad , Presentismo , Equilibrio entre Vida Personal y Laboral/métodos , Equilibrio entre Vida Personal y Laboral/organización & administración , Lugar de Trabajo/organización & administraciónRESUMEN
AIMS: To examine the conditions under which Screening, Brief Intervention and Referral to Treatment (SBIRT) programs can be sustained by health insurance payments. DESIGN: A mathematical model was used to estimate the number of patients needed for revenues to exceed costs. SETTING: Three medical settings in the United States were examined: in-patient, out-patient and emergency department. Components of SBIRT were delivered by combinations of health-care practitioners (generalists) and behavioral health specialists. PARTICIPANTS: Practitioners in seven SBIRT programs who received grants from the US Substance Abuse and Mental Health Services Administration (SAMHSA). MEASUREMENTS: Program costs and revenues were measured using data from grantees. Patient flows were measured from administrative data and adjusted with prevalence and screening estimates from the literature. FINDINGS: SBIRT can be sustained through health insurance reimbursement in out-patient and emergency department settings in most staffing mixes. To sustain SBIRT in in-patient programs, a patient flow larger than the national average may be needed; if that flow is achieved, the range of screens required to maintain a surplus is narrow. Sensitivity analyses suggest that the results are very sensitive to changes in the proportion of insured patients. CONCLUSIONS: Screening, Brief Intervention and Referral to Treatment programs in the United States can be sustained by health insurance payments under a variety of staffing models. Screening, Brief Intervention and Referral to Treatment programs can be sustained only in an in-patient setting with above-average patient flow (more than 2500 screens). Screening, Brief Intervention and Referral to Treatment programs in out-patient and emergency department settings can be sustained with below-average patient flows (fewer than 125 000 out-patient visits and fewer than 27 000 emergency department visits).
Asunto(s)
Costos de la Atención en Salud , Entrevista Motivacional/economía , Evaluación de Programas y Proyectos de Salud , Derivación y Consulta/economía , Trastornos Relacionados con Sustancias/economía , Economía Hospitalaria , Servicio de Urgencia en Hospital/economía , Hospitales , Humanos , Tamizaje Masivo/economía , Tamizaje Masivo/métodos , Modelos Teóricos , Entrevista Motivacional/métodos , Servicio Ambulatorio en Hospital/economía , Mecanismo de Reembolso/economía , Trastornos Relacionados con Sustancias/diagnóstico , Trastornos Relacionados con Sustancias/rehabilitación , Estados UnidosRESUMEN
OBJECTIVE: To estimate the cost and return on investment (ROI) of an intervention targeting work-family conflict (WFC) in the extended care industry. METHODS: Costs to deliver the intervention during a group-randomized controlled trial were estimated, and data on organizational costs-presenteeism, health care costs, voluntary termination, and sick time-were collected from interviews and administrative data. Generalized linear models were used to estimate the intervention's impact on organizational costs. Combined, these results produced ROI estimates. A cluster-robust confidence interval (CI) was estimated around the ROI estimate. RESULTS: The per-participant cost of the intervention was $767. The ROI was -1.54 (95% CI: -4.31 to 2.18). The intervention was associated with a $668 reduction in health care costs (Pâ<â0.05). CONCLUSIONS: This paper builds upon and expands prior ROI estimation methods to a new setting.
Asunto(s)
Instituciones de Cuidados Especializados de Enfermería/organización & administración , Equilibrio entre Vida Personal y Laboral/educación , Análisis Costo-Beneficio , Costos de la Atención en Salud/estadística & datos numéricos , Humanos , Presentismo/economía , Presentismo/estadística & datos numéricos , Ausencia por Enfermedad/economía , Ausencia por Enfermedad/estadística & datos numéricos , Instituciones de Cuidados Especializados de Enfermería/economía , Equilibrio entre Vida Personal y Laboral/economía , Recursos HumanosRESUMEN
Industrial chlorofluorocarbons that cause ozone depletion have been phased out under the Montreal Protocol. A chemically driven increase in polar ozone (or "healing") is expected in response to this historic agreement. Observations and model calculations together indicate that healing of the Antarctic ozone layer has now begun to occur during the month of September. Fingerprints of September healing since 2000 include (i) increases in ozone column amounts, (ii) changes in the vertical profile of ozone concentration, and (iii) decreases in the areal extent of the ozone hole. Along with chemistry, dynamical and temperature changes have contributed to the healing but could represent feedbacks to chemistry. Volcanic eruptions have episodically interfered with healing, particularly during 2015, when a record October ozone hole occurred after the Calbuco eruption.
Asunto(s)
Clorofluorocarburos/química , Pérdida de Ozono , Erupciones Volcánicas , Regiones Antárticas , Modelos Teóricos , Estaciones del AñoRESUMEN
It has long been known that solute segregation at crystalline defects can have profound effects on material properties. Nevertheless, quantifying the extent of solute segregation at nanoscale defects has proven challenging due to experimental limitations. A combined experimental and first-principles approach has been used to study solute segregation at extended intermetallic phases ranging from 4 to 35 atomic layers in thickness. Chemical mapping by both atom probe tomography and high-resolution scanning transmission electron microscopy demonstrates a markedly different composition for the 4-atomic-layer-thick phase, where segregation has occurred, compared to the approximately 35-atomic-layer-thick bulk phase of the same crystal structure. First-principles predictions of bulk free energies in conjunction with direct atomistic simulations of the intermetallic structure and chemistry demonstrate the breakdown of bulk thermodynamics at nanometer dimensions and highlight the importance of symmetry breaking due to the proximity of interfaces in determining equilibrium properties.
RESUMEN
The Rim Fire of 2013, the third largest area burned by fire recorded in California history, is simulated by a climate model coupled with a size-resolved aerosol model. Modeled aerosol mass, number, and particle size distribution are within variability of data obtained from multiple-airborne in situ measurements. Simulations suggest that Rim Fire smoke may block 4-6% of sunlight energy reaching the surface, with a dimming efficiency around 120-150 W m-2 per unit aerosol optical depth in the midvisible at 13:00-15:00 local time. Underestimation of simulated smoke single scattering albedo at midvisible by 0.04 suggests that the model overestimates either the particle size or the absorption due to black carbon. This study shows that exceptional events like the 2013 Rim Fire can be simulated by a climate model with 1° resolution with overall good skill, although that resolution is still not sufficient to resolve the smoke peak near the source region.