Lipid Bilayer Reformation Using the Wiping Blade for Improved Ion Channel Analysis.

The measurement of ion permeation activity across planar lipid bilayers is a useful technique for the functional analysis and drug evaluation of ion channels at the single-molecule level. To enhance the data throughput, parallelization of lipid bilayers is desirable. However, existing parallelized approaches face challenges in simultaneously and efficiently measuring ion channel activities under various conditions on one chip. In this study, we propose an approach to overcome these limitations by developing a device capable of repeated measurements of ion channels incorporated into individually arrayed lipid bilayers. Our device forms an array of a lipid bilayer at a micropore on a separator by merging two lipid monolayers assembled on the surface of aqueous droplets. We introduce a vertically moving, blade-shaped module─referred to as a "wiping blade"─which enables controlled disruption and reformation of the bilayer at the micropore. By optimizing the surface properties and clearance of the wiping blade, we successfully achieved repeated bilayer formation. The arrayed lipid bilayer device with the integrated wiping blade module demonstrates a 5-fold improvement in data throughput during ion channel activity measurements. Finally, we validate the practical utility of our device by evaluating the effects of an ion channel inhibitor. The developed device opens new avenues for high-throughput analysis and screening of ion channels, leading to significant advancements in drug discovery and functional studies of membrane proteins. It offers a powerful tool for researchers in the field and holds promise for accelerating drug development by targeting ion channels.

Structural basis for specific cleavage of Lys 63-linked polyubiquitin chains.

Deubiquitinating enzymes (DUBs) remove ubiquitin from conjugated substrates to regulate various cellular processes. The Zn(2+)-dependent DUBs AMSH and AMSH-LP regulate receptor trafficking by specifically cleaving Lys 63-linked polyubiquitin chains from internalized receptors. Here we report the crystal structures of the human AMSH-LP DUB domain alone and in complex with a Lys 63-linked di-ubiquitin at 1.2 A and 1.6 A resolutions, respectively. The AMSH-LP DUB domain consists of a Zn(2+)-coordinating catalytic core and two characteristic insertions, Ins-1 and Ins-2. The distal ubiquitin interacts with Ins-1 and the core, whereas the proximal ubiquitin interacts with Ins-2 and the core. The core and Ins-1 form a catalytic groove that accommodates the Lys 63 side chain of the proximal ubiquitin and the isopeptide-linked carboxy-terminal tail of the distal ubiquitin. This is the first reported structure of a DUB in complex with an isopeptide-linked ubiquitin chain, which reveals the mechanism for Lys 63-linkage-specific deubiquitination by AMSH family members.

Structural basis for specific recognition of Lys 63-linked polyubiquitin chains by tandem UIMs of RAP80.

RAP80 has a key role in the recruitment of the Abraxas-BRCC36-BRCA1-BARD1 complex to DNA-damage foci for DNA repair through specific recognition of Lys 63-linked polyubiquitinated proteins by its tandem ubiquitin-interacting motifs (UIMs). Here, we report the crystal structure of the RAP80 tandem UIMs (RAP80-UIM1-UIM2) in complex with Lys 63-linked di-ubiquitin at 2.2 A resolution. The two UIMs, UIM1 and UIM2, and the alpha-helical inter-UIM region together form a continuous 60 A-long alpha-helix. UIM1 and UIM2 bind to the proximal and distal ubiquitin moieties, respectively. Both UIM1 and UIM2 of RAP80 recognize an Ile 44-centered hydrophobic patch on ubiquitin but neither UIM interacts with the Lys 63-linked isopeptide bond. Our structure suggests that the inter-UIM region forms a 12 A-long alpha-helix that ensures that the UIMs are arranged to enable specific binding of Lys 63-linked di-ubiquitin. This was confirmed by pull-down analyses using RAP80-UIM1-UIM2 mutants of various length inter-UIM regions. Further, we show that the Epsin1 tandem UIM, which has an inter-UIM region similar to that of RAP80-UIM1-UIM2, also selectively binds Lys 63-linked di-ubiquitin.

Real-time quantitative characterization of ion channel activities for automated control of a lipid bilayer system.

This paper describes a novel signal processing method to characterize the activity of ion channels on a lipid bilayer system in a real-time and quantitative manner. Lipid bilayer systems, which enable single-channel level recordings of ion channel activities against physiological stimuli in vitro, are gaining attention in various research fields. However, the characterization of ion channel activities has heavily relied on time-consuming analyses after recording, and the inability to return the quantitative results in real time has long been a bottleneck to incorporating the system into practical products. Herein, we report a lipid bilayer system that integrates real-time characterization of ion channel activities and real-time response based on the characterization result. Unlike conventional batch processing, an ion channel signal is divided into short segments and processed during the recording. After optimizing the system to maintain the same characterization accuracy as conventional operation, we demonstrated the usability of the system with two applications. One is quantitative control of a robot based on ion channel signals. The velocity of the robot was controlled every second, which was around tens of times faster than the conventional operation, in proportion to the stimulus intensity estimated from changes in ion channel activities. The other is the automation of data collection and characterization of ion channels. By constantly monitoring and maintaining the functionality of a lipid bilayer, our system enabled continuous recording of ion channels over 2 h without human intervention, and the time of manual labor has been reduced from conventional 3 h to 1 min at a minimum. We believe the accelerated characterization and response in the lipid bilayer systems presented in this work will facilitate the transformation of lipid bilayer technology toward a practical level, finally leading to its industrialization.

Structural insight into the membrane insertion of tail-anchored proteins by Get3.

Tail anchored (TA) proteins, which are important for numerous cellular processes, are defined by a single transmembrane domain (TMD) near the C-terminus. The membrane insertion of TA proteins is mediated by the highly conserved ATPase Get3. Here we report the crystal structures of Get3 in ADP-bound and nucleotide-free forms at 3.0 A and 2.8 A resolutions, respectively. Get3 consists of a nucleotide binding domain and a helical domain. Both structures exhibit a Zn(2+)-mediated homodimer in a head-to-head orientation, representing an open dimer conformation. Our cross-link experiments indicated the closed dimer-stimulating ATP hydrolysis, which might be coupled with TA-protein release. Further, our coexpression-based binding assays using a model TA protein Sec22p revealed the direct interaction between the helical domain of Get3 and the Sec22p TMD. This interaction is independent of ATP and dimer formation. Finally, we propose a structural mechanism that links ATP hydrolysis with the TA-protein insertion mediated by the conserved DTAPTGH motif.

Highly sensitive VOC detectors using insect olfactory receptors reconstituted into lipid bilayers.

This paper reports a volatile organic compound (VOC) sensor based on olfactory receptors that were reconstituted into a lipid bilayer and used in a specifically designed gas flow system for rapid parts per billion (ppb)-level detection. This VOC sensor achieves both rapid detection and high detection probability because of its gas flow system and array design. Specifically, the gas flow system includes microchannels and hydrophobic microslits, which facilitate both the introduction of gas into the droplet and droplet mixing. We installed this system into a parallel lipid bilayer device and subsequently demonstrated parts per billion-level (0.5 ppb) detection of 1-octen-3-ol in human breath. Therefore, this system extends the various applications of biological odorant sensing, including breath diagnosis systems and environmental monitoring.

A Lipid-Bilayer-On-A-Cup Device for Pumpless Sample Exchange.

Lipid-bilayer devices have been studied for on-site sensors in the fields of diagnosis, food and environmental monitoring, and safety/security inspection. In this paper, we propose a lipid-bilayer-on-a-cup device for serial sample measurements using a pumpless solution exchange procedure. The device consists of a millimeter-scale cylindrical cup with vertical slits which is designed to steadily hold an aqueous solution and exchange the sample by simply fusing and splitting the solution with an external solution. The slit design was experimentally determined by the capabilities of both the retention and exchange of the solution. Using the optimized slit, a planar lipid bilayer was reconstituted with a nanopore protein at a microaperture allocated to the bottom of the cup, and the device was connected to a portable amplifier. The solution exchangeability was demonstrated by observing the dilution process of a blocker molecule of the nanopore dissolved in the cup. The pumpless solution exchange by the proposed cup-like device presents potential as a lipid-bilayer system for portable sensing applications.

Oligomerization of H(+)-pyrophosphatase and its structural and functional consequences.

The H(+)-pyrophosphatase (H(+)-PPase) consists of a single polypeptide, containing 16 or 17 transmembrane domains. To determine the higher order oligomeric state of Streptomyces coelicolor H(+)-PPase, we constructed a series of cysteine substitution mutants and expressed them in Escherichia coli. Firstly, we analyzed the formation of disulfide bonds, promoted by copper, in mutants with single cysteine substitutions. 28 of 39 mutants formed disulfide bonds, including S545C, a substitution at the periplasmic side. The formation of intermolecular disulfide bonds suppressed the enzyme activity of several, where the substituted residues were located in the cytosol. Creating disulfide links in the cytosol may interfere with the enzyme's catalytic function. Secondly, we prepared double mutants by introducing second cysteine substitutions into the S545C mutant. These double-cysteine mutants produced cross-linked complexes, estimated to be at least tetramers and possibly hexamers. Thirdly, we co-expressed epitope-tagged, wild type, and inactive mutant H(+)-PPases in E. coli and confirmed the formation of oligomers by co-purifying one subunit using the epitope tag used to label the other. The enzyme activity of these oligomers was markedly suppressed. We propose that H(+)-PPase is present as an oligomer made up of at least two or three sets of dimers.

Disulfide-bond formation in the H+-pyrophosphatase of Streptomyces coelicolor and its implications for redox control and enzyme structure.

Redox control of disulfide-bond formation in the H+-pyrophosphatase of Streptomyces coelicolor was investigated using cysteine mutants expressed in Escherichia coli. The wild-type enzyme, but not a cysteine-less mutant, was reversibly inactivated by oxidation. To determine the residues involved in oxidative inactivation, different cysteine residues were replaced. Analysis with a cysteine-modifying reagent revealed that the formation of a disulfide bond between cysteines 253 and 621 was responsible for enzyme inactivation. This result suggests that residues in different cytoplasmic loops are close to each other in the tertiary structure. Both cysteine residues are conserved in K+-independent (type II) H+-pyrophosphatases.

Expression of functional Streptomyces coelicolor H+-pyrophosphatase and characterization of its molecular properties.

H(+)-translocating pyrophosphatases (H(+)-PPases) are proton pumps that are found in many organisms, including plants, bacteria and protozoa. Streptomyces coelicolor is a soil bacterium that produces several useful antibiotics. Here we investigated the properties of the H(+)-PPase of S. coelicolor by expressing a synthetic DNA encoding the amino-acid sequence of the H(+)-PPase in Escherichia coli. The H(+)-PPase from E. coli membranes was active at a relatively high pH, stable up to 50 degrees C, and sensitive to N-ethylmaleimide, N,N'-dicyclohexylcarbodiimide and acylspermidine. Enzyme activity increased by 60% in the presence of 120 mM K(+), which was less than the stimulation observed with plant vacuolar H(+)-PPases (type I). Substitutions of Lys-507 in the Gly-Gln-x-x-(Ala/Lys)-Ala motif, which is thought to determine the K(+) requirement of H(+)-PPases, did not alter its K(+) dependence, suggesting that other residues control this feature of the S. coelicolor enzyme. The H(+)-PPase was detected during early growth and was present mainly on the plasma membrane and to a lesser extent on intracellular membranous structures.

Acylspermidine derivatives isolated from a soft coral, Sinularia sp, inhibit plant vacuolar H(+)-pyrophosphatase.

H(+)-pyrophosphatase (H(+)-PPase), which pumps H(+) across membranes coupled with PP(i) hydrolysis, is found in most plants, and some parasitic protists, eubacteria and archaebacteria. We assayed a number of extracts derived from 145 marine invertebrates as to their inhibitory effect on plant vacuolar H(+)-PPase. Acylspermidine derivatives [RCONH(CH(2))(3)N(CH(3))(CH(2))(4)N(CH(3))(2)] from a soft coral (Sinularia sp.) inhibited the PPi-hydrolysis activity of purified H(+)-PPase and the PP(i)-dependent H(+) pump activity (half inhibition concentration, 1 micro M) of vacuolar membranes of mung bean. The apparent K(i) was determined to be 0.9 micro M. Acylspermidines did not affect the activity of vacuolar H(+)-ATPase, plasma membrane H(+)-ATPase, mitochondrial ATPase or cytosolic PPase. Acylspermidines inhibited the acidification of vacuoles in protoplasts, as found on monitoring by the acridine orange fluorescent method. These results indicate that acylspermidine derivatives represent new inhibitors of H(+)-PPase with relatively high specificity.

Structural basis for the Rho- and phosphoinositide-dependent localization of the exocyst subunit Sec3.

The exocyst complex is a hetero-octameric protein complex that functions during cell polarization by tethering the secretory vesicle to the target membrane. The yeast exocyst subunit Sec3 binds to phosphatidylinositol 4,5-bisphosphate (PtdIns(4,5)P(2)) and the small GTPases Rho1 and Cdc42 via its N-terminal domain (Sec3-N), and these interactions target Sec3 to the plasma membrane. Here we report the crystal structure of the Sec3-N in complex with Rho1 at 2.6-A resolution. Sec3-N adopts a pleckstrin homology (PH) fold, despite having no detectable sequence homology with other PH domains of known structure. Clusters of conserved basic residues constitute a positively charged cleft, which was identified as a binding site for PtdIns(4,5)P(2). Residues Phe77, Ile115 and Leu131 of Sec3 bind to an extended hydrophobic surface formed around switch regions I and II of Rho1. To our knowledge, these are the first structural insights into how an exocyst subunit might interact with both protein and phospholipid factors on the target membrane.

Crystal structure of the NEMO ubiquitin-binding domain in complex with Lys 63-linked di-ubiquitin.

NEMO is essential for activation of the NF-kappaB signaling pathway, which is regulated by ubiquitination of proteins. The C-terminal leucine zipper of NEMO and its adjacent coiled-coil region (CC2-LZ) reportedly bind to linear ubiquitin chains with 1 microM affinity and to Lys 63-linked chains with 100 microM affinity. Here we report the crystal structure of the CC2-LZ region of mouse NEMO in complex with Lys 63-linked di-ubiquitin (K63-Ub(2)) at 2.7A resolution. The ubiquitin-binding region consists of a 130A-long helix and forms a parallel coiled-coil dimer. The Ile 44-centered hydrophobic patch of ubiquitin is recognized in the middle of the NEMO ubiquitin-binding region. NEMO interacts with each K63-Ub(2)via a single ubiquitin-binding site, consistent with low affinity binding with K63-Ub(2).

Membrane topology of the H+-pyrophosphatase of Streptomyces coelicolor determined by cysteine-scanning mutagenesis.

The H+-translocating pyrophosphatase (H+-PPase) is a proton pump that is found in a wide variety of organisms. It consists of a single polypeptide chain that is thought to possess between 14 and 17 transmembrane domains. To determine the topological arrangement of its conserved motifs and transmembrane domains, we carried out a cysteine-scanning analysis by determining the membrane topology of cysteine substitution mutants of Streptomyces coelicolor H+-PPase expressed in Escherichia coli using chemical reagents. First, we prepared a synthetic DNA that encoded the enzyme and constructed a functional cysteine-less mutant by substituting the four cysteine residues. We then introduced cysteine residues individually into 42 sites in its hydrophilic regions and N- and C-terminal segments. Thirty-six of the mutant enzymes retained both pyrophosphatase and H+-translocating activities. Analysis of 29 of these mutant forms using membrane-permeable and -impermeable sulfhydryl reagents revealed that S. coelicolor H+-PPase contains 17 transmembrane domains and that several conserved segments, such as the substrate-binding domains, are exposed to the cytoplasm. Four essential serine residues that were located on the cytoplasmic side were also identified. A marked characteristic of the S. coelicolor enzyme is a long additional sequence that includes a transmembrane domain at the C terminus. We propose that the basic structure of H+-PPases has 16 transmembrane domains with several large cytoplasmic loops containing functional motifs.