Retraction Note: Living annulative π-extension polymerization for graphene nanoribbon synthesis.

This article has been retracted. Please see the Retraction Notice for more detail: https://doi.org/10.1038/s41586-020-2950-0 .

Living annulative π-extension polymerization for graphene nanoribbon synthesis.

The properties of graphene nanoribbons (GNRs)1-5-such as conductivity or semiconductivity, charge mobility and on/off ratio-depend greatly on their width, length and edge structure. Existing bottom-up methods used to synthesize GNRs cannot achieve control over all three of these parameters simultaneously, and length control is particularly challenging because of the nature of step-growth polymerization6-18. Here we describe a living annulative π-extension (APEX)19 polymerization technique that enables rapid and modular synthesis of GNRs, as well as control over their width, edge structure and length. In the presence of palladium/silver salts, o-chloranil and an initiator (phenanthrene or diphenylacetylene), the benzonaphthosilole monomer polymerizes in an annulative manner to furnish fjord-type GNRs. The length of these GNRs can be controlled by simply changing the initiator-to-monomer ratio, achieving the synthesis of GNR block copolymers. This method represents a type of direct C-H arylation polymerization20 and ladder polymerization21, activating two C-H bonds of polycyclic aromatic hydrocarbons and constructing one fused aromatic ring per chain propagation step.

Statistical Verification of Anomaly in Chiral Angle Distribution of Air-Suspended Carbon Nanotubes.

Single-walled carbon nanotubes (SWCNT) have long attracted attention due to their distinct physical properties, depending on their chiral structures (chiralities). Clarifying their growth mechanism is important toward perfect chirality-controlled bulk synthesis. Although a correlation between the chirality distribution and the carbon atom configuration at an open tube edge has been predicted theoretically, lack of sufficient statistical data on metallic and semiconducting SWCNTs prohibited its verification. Here, we report statistical verification of the chirality distribution of 413 as-grown individual air-suspended SWCNTs with a length of over 20 µm using broadband Rayleigh spectroscopy. After excluding the impact of the difference in the number of possible SWCNT structures per chiral angle interval, the abundance profile with chiral angle exhibits an increasing trend with a distinct anomaly at a chiral angle of approximately 20°. These results are well explained considering the growth rate depending on armchair-shaped site configurations at the catalyst-nanotube interface.

Resonant Coupling of a Moiré Exciton to a Phonon in a WSe2/MoSe2 Heterobilayer.

Moiré patterns with an angular mismatch in van der Waals heterostructures are a fascinating platform to engineer optically generated excitonic properties. The moiré pattern can give rise to spatially ordered exciton ensembles, which offer the possibility for coherent quantum emitters and quantum simulation of many-body physics. The intriguing moiré exciton properties are affected by their dynamics and exciton-phonon interaction. Here, we report the moiré exciton and phonon interaction in a twisted WSe2/MoSe2 heterobilayer. By tuning the excitation energy, we realized the selective excitation of the moiré exciton at phonon resonances and the otherwise negligible small absorption. Furthermore, we revealed the relaxation of moiré exciton ensembles between different potential minima via the resonant phonon scattering process. Our findings highlight resonant coupling of a moiré exciton to a phonon and could pave a new way for the exploration of novel quantum phenomena of the moiré exciton.

Carbon Nanotube Photoluminescence Modulation by Local Chemical and Supramolecular Chemical Functionalization.

ConspectusCarbon nanotubes (CNTs) have been central materials in nanoscience and nanotechnologies. Single-walled CNTs (SWCNTs) consisting of a cylindrical graphene show a metallic (met) or semiconducting (sc) property depending on their rolling up manner (chirality). The sc-SWCNTs show characteristic chirality-dependent optical properties of their absorption and photoluminescence (PL) in the near-infrared (NIR) region. These are derived from their highly π-conjugated structures having semiconducting crystalline sp2 carbon networks with defined nanoarchitectures that afford a strong quantum confinement and weak dielectric screening. Consequently, photoirradiation of the SWCNTs produces a stable and mobile exciton (excited electron-hole pair) even at room temperature, and the exciton properties dominate such optical phenomena in the SWCNTs. However, the mobile excitons decrease the PL efficiency due to nonradiative relaxation including collision with tube edges and relaxation to lower-lying dark states. A breakthrough regarding the efficient use of the mobile exciton for PL has recently been achieved by local chemical functionalization of the SWCNTs, in which the chemical reactions introduce local defects of oxygen and sp3 carbon atoms in the tube structures. The defect doping creates new emissive doped sites that have narrower band gaps and trap the mobile excitons, which provides locally functionalized SWCNTs (lf-SWCNTs). As a result, the localized exciton produces E11* PL with red-shifted wavelengths and enhanced PL quantum yields compared to the original E11 PL of the nonmodified SWCNTs.In this Account, we describe recently revealed fundamental properties of the lf-SWCNTs based on the analyses by photophysics, theoretical calculations, and electrochemistry combined with in situ PL spectroscopy. The new insight allows us to expand the wavelength regions of the NIR E11* PL derived from the localized exciton, in which upconversion generates a higher energy PL through thermal activation and proximal doped site formation using bis-aryldiazonium modifiers provides a much lower energy PL than typical E11* PL. Moreover, owing to the chemical reaction-dominant doping process, the molecular structure design of modifiers succeeds in producing functionalized lf-SWCNTs; namely, molecular functions are incorporated into the doped sites for their PL modulation. The wavelength changes/switching in the E11* PL selectively occurs by a supramolecular approach using molecular recognition and imine chemistry. Therefore, the local chemical functionalization of the SWCNTs is a key to designing the properties and creating their new functions of the lf-SWCNTs. Fundamental understanding of the doped site properties of the lf-SWCNTs and molecularly driven approaches for exciton and defect engineering would unveil the intrinsic natures of these materials, which is crucial for elevating the SWCNT-based nanotechnologies to the next stage. The resulting materials are of interest in the fields of high performance NIR-II imaging and sensing for bio/medical analyses and single-photon emitters in quantum information technology.

Theory of exciton thermal radiation in semiconducting single-walled carbon nanotubes.

Spectral control of thermal radiation is an essential strategy for highly efficient and functional utilization of thermal radiation energy. Among the various proposed methods, quantum confinement in low-dimensional materials is promising because of its inherent ability to emit narrowband thermal radiation. Here, we theoretically investigate thermal radiation from one-dimensional (1D) semiconductors characterized by the strong quantum correlation effect due to the Coulomb interaction. We derive a simple and useful formula for the emissivity, which is then used to calculate the thermal radiation spectrum of semiconducting single-walled carbon nanotubes as a representative of 1D semiconductors. The calculations show that the exciton state, which is an electron-hole pair mutually bound by the Coulomb interaction, causes enhancement of the radiation spectrum peak and significant narrowing of its linewidth in the near-infrared wavelength range. The theory developed here will be a firm foundation for exciton thermal radiation in 1D semiconductors, which is expected to lead to new energy harvesting technologies.

Step-Growth Annulative π-Extension Polymerization for Synthesis of Cove-Type Graphene Nanoribbons.

Graphene nanoribbons (GNRs), nanometer-wide strips of graphene, are attracting significant attention in materials science as candidates for next-generation carbon materials. As their physical properties mainly depend on their structures, the precise synthesis of structurally well-defined GNRs is highly desirable to control their properties. Herein, we report a step-growth annulative π-extension polymerization that allows for the rapid and modular synthesis of cove-type GNRs with pyrene and/or coronene diimide repeating units. The structures and photophysical properties of the separated GNRs were confirmed by various spectroscopic analyses. In addition, gas-blow-assisted uniform on-surface self-assembly of the GNRs was accomplished.

Observation of Drastic Electronic-Structure Change in a One-Dimensional Moiré Superlattice.

We report the first experimental observation of a strong-coupling effect in a one-dimensional moiré superlattice. We study one-dimensional double-wall carbon nanotubes (DWCNTs) in which van der Waals-coupled two single nanotubes form a one-dimensional moiré superlattice. We experimentally combine Rayleigh scattering spectroscopy and electron beam diffraction on the same individual DWCNTs to probe the optical transitions of the structure-identified DWCNTs in the visible spectral range. Among more than 30 structure-identified DWCNTs examined, we experimentally observed and identified a drastic change of the optical transition spectrum in a DWCNT with chirality (12,11)@(17,16). The origin of the marked change is attributed to the strong intertube coupling effect in the moiré superlattice formed by two nearly armchair nanotubes. Our numerical simulation is consistent with the experimental findings.

Synthesis and Size-Dependent Properties of [12], [16], and [24]Carbon Nanobelts.

The synthesis and X-ray crystal structure of the first member of the carbon nanobelt family is reported. [12]Carbon nanobelt ([12]CNB) was originally obtained from a nickel-mediated reductive coupling reaction of a dodecabrominated macrocyclic precursor, albeit only in 1% yield. The present article reports on the development of this synthetic strategy and its extension to the preparation of the [16] and [24]CNB analogues. In particular, our extensive investigations on the final belt-forming, nickel-mediated reaction led to the development of a new ligand system that provides [12]CNB in up to 7% yield, contributing to the commercialization of [12]CNB. The belt structures of [12], [16], and [24]CNB were characterized by NMR, UV-vis, and Raman spectroscopy as well as mass spectrometry and X-ray crystallography. The fluorescence of the CNBs in solution displayed a remarkable dependence on the ring size, ranging from a broad red emission ([12]CNB) to a narrow-band blue emission ([24]CNB), while both features are observed for [16]CNB.

Carrier Transport and Photoresponse in GeSe/MoS2 Heterojunction p-n Diodes.

Simple stacking of thin van der Waals 2D materials with different physical properties enables one to create heterojunctions (HJs) with novel functionalities and new potential applications. Here, a 2D material p-n HJ of GeSe/MoS2 is fabricated and its vertical and horizontal carrier transport and photoresponse properties are studied. Substantial rectification with a very high contrast (>104 ) through the potential barrier in the vertical-direction tunneling of HJs is observed. The negative differential transconductance with high peak-to-valley ratio (>105 ) due to the series resistance change of GeSe, MoS2 , and HJs at different gate voltages is observed. Moreover, strong and broad-band photoresponse via the photoconductive effect are also demonstrated. The explored multifunctional properties of the GeSe/MoS2 HJs are expected to be important for understanding the carrier transport and photoresponse of 2D-material HJs for achieving their use in various new applications in the electronics and optoelectronics fields.

Evidence for Fast Interlayer Energy Transfer in MoSe2/WS2 Heterostructures.

Strongly bound excitons confined in two-dimensional (2D) semiconductors are dipoles with a perfect in-plane orientation. In a vertical stack of semiconducting 2D crystals, such in-plane excitonic dipoles are expected to efficiently couple across van der Waals gap due to strong interlayer Coulomb interaction and exchange their energy. However, previous studies on heterobilayers of group 6 transition metal dichalcogenides (TMDs) found that the exciton decay dynamics is dominated by interlayer charge transfer (CT) processes. Here, we report an experimental observation of fast interlayer energy transfer (ET) in MoSe2/WS2 heterostructures using photoluminescence excitation (PLE) spectroscopy. The temperature dependence of the transfer rates suggests that the ET is Förster-type involving excitons in the WS2 layer resonantly exciting higher-order excitons in the MoSe2 layer. The estimated ET time of the order of 1 ps is among the fastest compared to those reported for other nanostructure hybrid systems such as carbon nanotube bundles. Efficient ET in these systems offers prospects for optical amplification and energy harvesting through intelligent layer engineering.

Construction of Covalent Organic Nanotubes by Light-Induced Cross-Linking of Diacetylene-Based Helical Polymers.

Organic nanotubes (ONTs) are tubular nanostructures composed of small molecules or macromolecules that have found various applications including ion sensor/channels, gas absorption, and photovoltaics. While most ONTs are constructed by self-assembly processes based on weak noncovalent interactions, this unique property gives rise to the inherent instability of their tubular structures. Herein, we report a simple "helix-to-tube" strategy to construct robust, covalent ONTs from easily accessible poly(m-phenylene diethynylene)s (poly-PDEs) possessing chiral amide side chains that can adopt a helical conformation through hydrogen-bonding interactions. The helically folded poly-PDEs subsequently undergo light-induced cross-linking at longitudinally aligned 1,3-butadiyne moieties across the whole helix to form covalent tubes (ONTs) both in solution and solid phases. The structures of poly-PDEs and covalent ONTs were characterized by spectroscopic analyses, diffraction analysis, and microscopic analyses. We envisage that this simple yet powerful "helix-to-tube" strategy will generate a range of ONT-based materials by introducing functional moieties into a monomer.

Tunable photoluminescence of monolayer MoS2 via chemical doping.

We demonstrate the tunability of the photoluminescence (PL) properties of monolayer (1L)-MoS2 via chemical doping. The PL intensity of 1L-MoS2 was drastically enhanced by the adsorption of p-type dopants with high electron affinity but reduced by the adsorption of n-type dopants. This PL modulation results from switching between exciton PL and trion PL depending on carrier density in 1L-MoS2. Achievement of the extraction and injection of carriers in 1L-MoS2 by this solution-based chemical doping method enables convenient control of optical and electrical properties of atomically thin MoS2.

Observation of negative and positive trions in the electrochemically carrier-doped single-walled carbon nanotubes.

Understanding of electronic and optical features of single-walled carbon nanotubes (SWNTs) has been a central issue in science and nanotechnology of carbon nanotubes. We describe the detection of both the positive trion (positively charged exciton) and negative trion (negatively charged exciton) as a three-particle bound state in the SWNTs at room temperature by an in situ photoluminescence spectroelectrochemistry method for an isolated SWNT film cast on an ITO electrode. The electrochemical hole and electron dopings enable us to detect such trions on the SWNTs. The large energy difference between the singlet bright exciton and the negative and positive trions showing a tube diameter dependence is determined by both the exchange splitting energy and the trion binding energy. In contrast to conventional compound semiconductors, on the SWNTs, the negative trion has almost the same binding energy to the positive trion, which is attributed to nearly identical effective masses of the holes and electrons.

Directional Exciton-Energy Transport in a Lateral Heteromonolayer of WSe2-MoSe2.

Controlling the direction of exciton-energy flow in two-dimensional (2D) semiconductors is crucial for developing future high-speed optoelectronic devices using excitons as the information carriers. However, intrinsic exciton diffusion in conventional 2D semiconductors is omnidirectional, and efficient exciton-energy transport in a specific direction is difficult to achieve. Here we demonstrate directional exciton-energy transport across the interface in tungsten diselenide (WSe2)-molybdenum diselenide (MoSe2) lateral heterostructures. Unidirectional transport is spontaneously driven by the built-in asymmetry of the exciton-energy landscape with respect to the heterojunction interface. At excitation positions close to the interface, the exciton photoluminescence (PL) intensity was substantially decreased in the WSe2 region and enhanced in the MoSe2 region. In PL excitation spectroscopy, it was confirmed that the observed phenomenon arises from lateral exciton-energy transport from WSe2 to MoSe2. This directional exciton-energy flow in lateral 2D heterostructures can be exploited in future optoelectronic devices.

Healing Patterns of Non-Collagenated Bovine and Collagenated Porcine Xenografts Used for Sinus Floor Elevation: A Histological Study in Rabbits.

Objective: To compare healing of collagenated and non-collagenated xenografts used for maxillary sinus floor elevation. Materials and Methods: Two different xenografts were used: deproteinized bovine bone (DBBM group) and collagenated corticocancellous porcine bone (collagenated group). Healing was studied after 2, 4, and 8 weeks. The loss of dimensions of the elevated area and the percentages of new bone, xenograft remnants, osteoclastic zones, vessels, inflammatory infiltrates, and soft tissues were analyzed. Three regions were evaluated: close to the bone walls (bone wall region), subjacent the sinus mucosa (submucosa region), and the center of the elevated area (middle region). The primary variables were the percentage of new bone and xenograft remnants. Results: Between 2 and 8 weeks, the elevated areas showed a reduction of 16.3% and 52.2% in the DBBM and collagenated groups, respectively (p < 0.01 between the two areas after 8 weeks). After 8 weeks, the highest content of new bone was observed in the bone wall region, which was higher in the collagenated group than in the DBBM group (41.6% and 28.6%, respectively; p < 0.01). A similar quantity of new bone was found between the two groups in other regions. A higher percentage of vessels in all regions evaluated (p < 0.01) and soft tissue in the sub-mucosa region (p < 0.05) was found in the collagenated group than in the DBBM group. Conclusions: The present study showed that both xenografts allowed new bone formation. In comparison with the non-collagenated xenograft, the collagenated xenograft underwent higher resorption, resulting in greater shrinkage of the elevated space after sinus lifting and a higher content of new bone in the regions close to the bone walls. Clinical relevance: In this study, the region adjacent to the bone wall showed the highest new bone content. This region resembles the base of the sinus, closest to the sinus floor and walls, and is the most important region from a clinical point of view because it is where the implant will be installed. Residues of the biomaterial remained after 8 weeks of healing. Other reports have shown that these biomaterial residues may interfere with the integration of implants.

Room-Temperature Chiral Light-Emitting Diode Based on Strained Monolayer Semiconductors.

Room-temperature chiral light sources whose optical helicity can be electrically switched are one of the most important devices for future optical quantum information processing. The emerging valley degree of freedom in monolayer semiconductors allows generation of chiral luminescence via valley polarization. However, relevant valley-polarized light-emitting diodes (LEDs) have only been achieved at low temperatures (typically below 80 K). Here, a room-temperature chiral LED with strained transition metal dichalcogenide monolayers is realized. Spatially resolved polarization spectroscopy reveals that strain effects are crucial to yielding robust valley-polarized electroluminescence. The broken threefold rotational symmetry of strained monolayers induce inequivalent valley drifts at the K/K' valleys, resulting in different amounts of spin recombination driven by electric fields. Based on this scenario, ideally strained conditions are designed for LEDs on flexible substrates, in which the helicity of room-temperature valley-polarized electroluminescence is electrically tuned. The results provide a new pathway for practical chiral light sources based on monolayer semiconductors.

Sonochemical reaction to control the near-infrared photoluminescence properties of single-walled carbon nanotubes.

The effect of ultrasonic irradiation on the optical properties of single-walled carbon nanotubes (SWNTs) was investigated. Upon sonication in D2O in the presence of sodium dodecylbenzene sulfonate (SDBS) under air, red-shifted photoluminescence (PL) peaks at ∼1043 and ∼1118 nm were observed from the aqueous suspensions of (6,4) and (6,5)SWNTs, accompanied by a decrease in the intensity of the intrinsic PL peaks. Upon sonication with SDBS under an Ar atmosphere, the rate of spectral change increased with the sonication time and new PL peaks emerged at 1043, 1118, and 1221 nm. Meanwhile, upon the addition of 1-butanol, the PL peaks emerged only at 1043 nm and 1118 nm, while the emergence of the peak at 1221 nm was inhibited. On the other hand, a suspension with highly dispersed SWNTs was obtained upon sonication in the presence of sodium cholate without any change in the intrinsic optical properties of SWNTs. These experimental results reveal that the PL characteristics of SWNTs can be controlled by controlling the sonication conditions such as the type of surfactant used, the concentration of SWNTs, reaction environment, and the presence of an inhibitor such as 1-butanol.