RESUMEN
Safety concerns remain a bottleneck for the application of 2,4,6,8,10,12-hexanitro- 2,4,6,8,10,12-hexaazaisowurtzitane (CL-20)/1,3,5,7-tetranitro-1,3,5,7-tetrazacyclooctane (HMX) cocrystal. Melamine-formaldehyde (MF) resin was chosen to fabricate CL-20/HMX cocrystal-based core-shell composites (CH@MF composites) via a facile in situ polymerization method. The resulted CH@MF composites were comprehensively characterized, and a compact core-shell structure was confirmed. The effects of the shell content on the properties of the composites were explored as well. As a result, we found that, except for CH@MF-2 with a 1% shell content, the increase in shell content led to a rougher surface morphology and more close-packed structure. The thermal decomposition peak temperature improved by 5.3 °C for the cocrystal enabled in 1.0 wt% MF resin. Regarding the sensitivity, the CH@MF composites exhibited a significantly reduced impact and friction sensitivity with negligible energy loss compared with the raw cocrystal and physical mixtures due to the cushioning and insulation effects of the MF coating. The formation mechanism of the core-shell micro-composites was further clarified. Overall, this work provides a green, facile and industrially potential strategy for the desensitization of energetic cocrystals. The CH@MF composites with high thermal stability and low sensitivity are promising to be applied in propellants and polymer-bonded explosive (PBX) formulations.
Asunto(s)
Formaldehído , Polímeros , Azocinas , Polimerizacion , Polímeros/química , TriazinasRESUMEN
Weak interfacial interactions remain a bottleneck for composite materials due to their weakened performance and restricted applications. The development of core-shell engineering shed light on the preparation of compact and intact composites with improved interfacial interactions. This review addresses how core-shell engineering has been applied to energetic materials, with emphasis upon how micro-energetic materials, the most widely used particles in the military field, can be generated in a rational way. The preparation methods of core-shell structured explosives (CSEs) developed in the past few decades are summarized herein. Case studies on polymer-, explosive- and novel materials-based CSEs are presented in terms of their compositions and physical properties (e.g., thermal stability, mechanical properties and sensitivity). The mechanisms behind the dramatic and divergent properties of CSEs are also clarified. A glimpse of the future in this area is given to show the potential for CSEs and some suggestions regarding the future research directions are proposed.
RESUMEN
4,8-Dihydrodifurazano[3,4-b,e]pyrazine (DFP) is one kind of parent compound for the synthesis of various promising difurazanopyrazine derivatives. In this paper, eleven series of energetic salts composed of 4,8-dihydrodifurazano[3,4-b,e]pyrazine-based anions and ammonium-based cations were designed. Their densities, heats of formation, energetic properties, impact sensitivity, and thermodynamics of formation were studied and compared based on density functional theory and volume-based thermodynamics method. Results show that ammonium and hydroxylammonium salts exhibit higher densities and more excellent detonation performance than guanidinium and triaminoguanidinium salts. Therein, the substitution with electron-withdrawing groups (-NO2, -CH2NF2, -CH2ONO2, -C(NO2)3, -CH2N3) contributes to enhancing the densities, heats of formation, and detonation properties of the title salts, and the substitution of -C(NO2)3 features the best performance. Incorporating N-O oxidation bond to difurazano[3,4-b,e]pyrazine anion gives a rise to the detonation performance of the title salts, while increasing their impact sensitivity meanwhile. Importantly, triaminoguanidinium 4,8-dihydrodifurazano[3,4-b,e]pyrazine (J4) has been successfully synthesized. The experimentally determined density and H50 value of J4 are 1.602 g/cm3 and higher than 112 cm, which are consistent with theoretical values, supporting the reliability of calculation methods. J4 proves to be a thermally stable and energetic explosive with decomposition peak temperature of 216.7 °C, detonation velocity 7732 m/s, and detonation pressure 25.42 GPa, respectively. These results confirm that the derivative work in furazanopyrazine compounds is an effective strategy to design and screen out potential candidates for high-performance energetic salts.
Asunto(s)
Compuestos de Amonio/química , Aniones/química , Cationes/química , Modelos Teóricos , Pirazinas/química , Sales (Química)/química , Algoritmos , Estructura Molecular , Sensibilidad y Especificidad , TermodinámicaRESUMEN
Energetic Metal-Organic Framework (EMOF) compounds have gained significant attention in recent years as a hot research topic in the fields of explosives and propellants. This article provides an overview of the latest research progress of EMOFs in various areas, including heat-resistant explosives, burning rate catalysts and initiating explosives. It discusses the recent development trends of high-energy EMOFs, such as high-dimensional and solvent-free structural design, simplified and scalable synthesis conditions, environmentally friendly manufacturing processes with tunable structures, high-energy, low-sensitivity and multifunctional target products. The challenges and issues faced by EMOFs in heat-resistant explosives, burning rate catalysts and initiating explosives are presented. Furthermore, the key research directions for future applications of EMOFs in the fields of explosives and propellants are discussed, including solvent-free high-dimensional EMOFs design and synthesis, precise modulation of EMOFs molecular composition and pore structure, improvement of accurate prediction methods for physicochemical properties of high-energy EMOFs, low-cost large-scale production and development of multifunctional composite EMOFs as energetic materials, exploration of influencing factors, and comprehensive study on the application of novel and high-performance multifunctional EMOFs.
RESUMEN
A Diels-Alder (DA) bond containing poly(tetrahydrofuran)-co-(ethyleneoxide) (PET) based linear polyurethane (PET-DA-PU) was synthesized via a prepolymer process using PET as raw material, DA diol as chain extender agent, and toluene-2,4-diisocyanate (TDI) as coupling agent. The structure of PET-DA-PU was characterized by attenuated total reflectance-Fourier transform-infrared spectroscopy (ATR-FTIR), proton nuclear magnetic resonance spectrometry (1H NMR) and carbon nuclear magnetic resonance spectrometry (13C NMR). The thermal performance and self-healing behavior of PET-DA-PU were investigated by differential scanning calorimetry (DSC), polarized optical microscope, universal testing machine, scanning electron microscopy (SEM) and NMR, respectively. The glass transition temperature of PET-DA-PU was found to be -59 °C. Under the heat treatment at 100 °C, the crack on PET-DA-PU film completely disappeared in 9 min, and the self-healing efficiency that was determined by the recovery of the largest tensile strength after being damaged and healed at 100 °C for 20 min can reach 89.1%. SEM images revealed the micro-cracks along with the blocky aggregated hard segments which were the important reasons for fracture. NMR spectroscopy indicated that the efficiency of retro DA reaction of PET-DA-PU was 70% after 20 min heating treatment at 100 °C. Moreover, the PET-DA-PU/Al/Na2SO4 composite was also prepared to simulate propellant formulation and investigated by universal testing machine and SEM; its healing efficiency was up to 87.8% under the same heat treatment process and exhibits good self-healing ability. Therefore, PET-DA-PU may serve as a promising thermally self-healing polymeric binder for future propellant formulations.
RESUMEN
In order to enhance the application performance of glycidyl azide polymer (GAP) in solid propellant, an energetic copolyurethane binder, (poly[3,3-bis(2,2,2-trifluoro-ethoxymethyl)oxetane] glycol-block-glycidylazide polymer (PBFMO-b-GAP) was synthesized using poly[3,3-bis(2,2,2-trifluoro-ethoxymethyl)oxetane] glycol (PBFMO), which was prepared from cationic polymerization with GAP as the raw material and toluene diisocyanate (TDI) as the coupling agent via a prepolymer process. The molecular structure of copolyurethanes was confirmed by attenuated total reflectance-Fourier transform-infrared spectroscopy (ATR-FTIR), nuclear magnetic resonance spectrometry (NMR), and gel permeation chromatography (GPC). The impact sensitivity, mechanical performance, and thermal behavior of PBFMO-b-GAP were studied by drop weight test, X-ray photoelectron spectroscopic (XPS), tensile test, scanning electron microscopy (SEM), differential scanning calorimetry (DSC), and thermal gravimetric analysis (TGA), respectively. The results demonstrated that the introduction of fluoropolymers could evidently reduce the sensitivity of GAP-based polyurethane and enhance its mechanical behavior (the tensile strength up to 5.75 MPa with a breaking elongation of 1660%). Besides, PBFMO-b-GAP exhibited excellent resistance to thermal decomposition up to 200 °C and good compatibility with Al and cyclotetramethylene tetranitramine (HMX). The thermal performance of the PBFMO-b-GAP/Al complex was investigated by a cook-off test, and the results indicated that the complex has specific reaction energy. Therefore, PBFMO-b-GAP may serve as a promising energetic binder for future propellant formulations.
RESUMEN
In this paper, twelve 1,3-dinitrohexahydropyrimidine-based energetic compounds were designed by introducing various explosopheres into hexahydropyrimidine skeleton. Their geometric and electronic structures, heats of formation (HOFs), energetic performance, thermal stability and impact sensitivity were discussed. It is found that the incorporation of electron-withdrawing groups (-NO2, -NHNO2, -N3, -CH(NO2)2, -CF(NO2)2, -C(NO2)3) improves HOFs of the derivatives and all the substituents contribute to enhancing the densities and detonation properties (D, P) of the title compounds. Therein, the substitution of -C(NO2)3 features the best energetic performance with detonation velocity of 9.40 km s-1 and detonation pressure of 40.20 GPa. An analysis of the bond dissociation energies suggests that N-NO2 bond may be the initial site in the thermal decompositions for most of the derivatives. Besides, -ONO2 and -NF2 derivatives stand out with lower impact sensitivity. Characters with striking detonation properties (D = 8.62 km s-1, P = 35.08 GPa; D = 8.81 km s-1, P = 34.88 GPa), good thermal stability, and acceptable impact sensitivity (characteristic height H50 over 34 cm) lead novel compounds 5,5-difluoramine-1,3-dinitrohexahydropyrimidine (K) and 5-fluoro-1,3,5-trinitrohexahydropyrimidine (L) to be very promising energetic materials. This work provides the theoretical molecular design and a reasonable synthetic route of L for further experimental synthesis and testing.
RESUMEN
An azide terminated ethylene oxide-tetrahydrofuran copolymer with urethane segments (ATUPET) as a novel binder pre-polymer, has been prepared through ethylene oxide-tetrahydrofuran random copolymer (PET) end-capping modification via one-pot method. The structure characterization of the modifier has been analyzed by FTIR, 1H NMR, 13C NMR and GPC. In comparison with PET, ATUPET has a slightly higher viscosity because it has additional hydrogen bonding interaction generated by the urethane in ATUPET. Triazole cross-linked elastomers based on ATUPET with various functional molar ratios were prepared using tripropargylamine as a curing agent and cross-linker. Mechanical properties indicate that the modulus E and tensile strength σ b exhibit a parabolic dependence with the increase in R. At around the stoichiometric ratio, the modulus E and tensile strength σ b reach a maximum and the elongation at break exhibit an acceptable value at the same time. Swelling tests demonstrate that the apparent cross-linking densities (N0) have a maximum value at the stoichiometric ratio. Thermal analysis shows that the ATUPET prepolymer and its polytriazoles elastomers exhibit a satisfactory stability. The results demonstrated that ATUPET might be a promising polymeric binder for future propellant formulations especially in the field of isocyanate-free curing technology.