Optimization of a real-time LED based spectral imaging system.

We are designing a real-time spectral imaging system using micro-LEDs and a high-speed micro-camera for potential endoscopic applications. Currently, gastrointestinal (GI) endoscopic imaging has largely been limited to white light imaging (WLI), while other endoscopic approaches have seen advancements in imaging techniques including fluorescence imaging, narrow-band imaging, and stereoscopic visualization. To further advance GI endoscopic imaging, we are working towards a high-speed spectral imaging system that can be implemented with a chip-on-tip design for a flexible endoscope. Hyperspectral imaging has potential applications in a variety of imaging procedures with its ability to discern spectral footprints of the imaging field in a series of two-dimensional images at different wavelengths. For investigating the feasibility of a real-time LED-based hyperspectral imaging system for endoscopic applications we designed and developed a large-scale prototype using through-hole LEDs, which is further analyzed as we design our future system. For high quality imaging, the LED array must be designed with the specific illumination patterns and intensities of each LED considered. We present our work in optimizing our current LED array through optical simulations performed in silico. Damped least squares and orthogonal descent algorithms are implemented to maximize irradiance power and improve illumination homogeneity at several working distances by adjusting radial distances of each LED from the camera. With our prototype LED-based hyperspectral imaging system, the simulation and optimization approach achieved an average increase of 8.36 ± 8.79% in irradiance and a 4.3% decrease in standard deviation at multiple working distances and field-of-views for each LED, as compared to the original design, leading to improved image quality and maintained acquisition speeds. This work highlights the value of in silico optical simulation and provides a framework for improved optical system design and will inform design decisions in future works.

LED-based Hyperspectral Endoscopic Imaging.

Hyperspectral endoscopy can offer multiple advantages as compared to conventional endoscopy. Our goal is to design and develop a real-time hyperspectral endoscopic imaging system for the diagnosis of gastrointestinal (GI) tract cancers using a micro-LED array as an in-situ illumination source. The wavelengths of the system range from ultraviolet to visible and near infrared. To evaluate the use of the LED array for hyperspectral imaging, we designed a prototype system and conducted ex vivo experiments using normal and cancerous tissues of mice, chicken, and sheep. We compared the results of our LED-based approach with our reference hyperspectral camera system. The results confirm the similarity between the LED-based hyperspectral imaging system and the reference HSI camera. Our LED-based hyperspectral imaging system can be used not only as an endoscope but also as a laparoscopic or handheld devices for cancer detection and surgery.

Development of a real-time spectral imaging system using in-site micro-LED-based illumination and high-speed micro-camera for endoscopic applications.

We designed a compact, real-time LED-based endoscopic imaging system for the detection of various diseases including cancer. In gastrointestinal applications, conventional endoscopy cannot reliably differentiate tumor from normal tissue. Current hyperspectral imaging systems are too slow to be used for real-time endoscopic applications. We are investigating real-time spectral imaging for different tissue types. Our objective is to develop a catheter for real-time hyperspectral gastrointestinal endoscopy. The endoscope uses multiple wavelengths within UV, visible, and IR light spectra generated by a micro-LED array. We capture images with a monochrome micro camera, which is cost-effective and smaller than the current hyperspectral imagers. A wireless transceiver sends the captured images to a workstation for further processing, such as tumor detection. The spatial resolution of the system is defined by camera resolution and the distance to the object, while the number of LEDs in the multi-wavelength light source determines the spectral resolution. To investigate the properties and the limitations of our high-speed spectral imaging approach, we designed a prototype system. We conducted two experiments to measure the optimal forward voltages and lighting duration of the LEDs. These factors affect the maximum feasible imaging rate and resolution. The lighting duration of each LED can be shorter than 10 ms while producing an image with a high signal-to-noise ratio and no illumination interference. These results support the idea of using a high-speed camera and an LED-array for real-time hyperspectral endoscopic imaging.