Digital workflow feasibility for the fabrication of intraoral maxillofacial prosthetics after surgical resection: a systematic literature review.

OBJECTIVES: To evaluate the current evidence of digital workflow feasibility based on the data acquisition methods and the software tools used to fabricate intraoral prostheses for patients with partial or total maxillary and mandibular defects. MATERIALS AND METHODS: An electronic search was performed in PubMed, SCOPUS, and Web of Science using a combination of relevant keywords: digital workflow, digital designing, computer-assisted design-computer aided manufacturing, 3D printing, maxillectomy, and mandibulectomy. The Joanna Briggs Institute Critical Appraisal Tool was used to assess the quality of evidence in the studies reviewed. RESULTS: From a total of 542 references, 33 articles were selected, including 25 on maxillary prostheses and 8 on mandibular prostheses. The use of digital workflows was limited to one or two steps of the fabrication of the prostheses, and only four studies described a complete digital workflow. The most preferred method for data acquisition was intraoral scanning with or without a cone beam computed tomography combination. CONCLUSION: Currently, the fabrication process of maxillofacial prostheses requires combining digital and conventional methods. Simplifying the data acquisition methods and providing user-friendly and affordable software may encourage clinicians to use the digital workflow more frequently for patients requiring maxillofacial prostheses.

Validation of the pink esthetic score/white esthetic score at single tooth-supported prostheses in the esthetic zone: A randomized clinical trial.

OBJECTIVES: To validate the reproducibility and inter/intra-observer variability of the Pink Esthetic Score/White Esthetic Score (PES/WES) of single tooth-supported prostheses in the maxillary esthetic zone (13-23). MATERIALS AND METHODS: Forty-five patients were randomly assigned to one of the three treatment options (15 patients per group) receiving each one a different crown type: Porcelain fused to metal (PFM), monolithic zirconia, and lithium disilicate. Eight observers from each of four different specialties (Prosthodontists, Orthodontists, Periodontists, and Oral Surgeons) were recruited and assessed twice and four weeks apart (i.e., T1 and T2) 45 photographs of the single tooth-supported prosthesis using PES/WES and compared them with contralateral teeth. RESULTS: According to the ANOVA and post hoc tests, the zirconia crown type obtained the highest mean score by all observers, with a mean value of 16.70 ± 2.94. The prosthodontists and oral surgeons assigned the lowest mean score to PFM crowns, 13.03 ± 3.47 and 13.80 ± 3.17, respectively. Notably, the prosthodontists awarded the highest scores, specifically 17.50 ± 2.81 for the zirconia crowns. Intraobserver agreement was calculated utilizing the paired t-test. Pairwise comparisons between observers of different specialties revealed significant intraobserver agreement. Interclass correlation coefficient (ICC) scores were statistically significant among four specialties. No difference was detected concerning the interobserver agreement. CONCLUSIONS: The PES/WES index remains consistent across various observers from different specializations, yielding uniform results in the overall esthetic evaluation. Consequently, in light of the presented preliminary positive results, its use might also be considered for the esthetic assessment of single-tooth-supported prostheses. CLINICAL SIGNIFICANCE: The PES/WES index may be employed clinically to evaluate single tooth-supported prostheses as it emerged as a reproducible esthetic scoring system.

Clinical performance of immediately placed and immediately loaded single implants in the esthetic zone: A systematic review and meta-analysis.

OBJECTIVES: The aim of this study was to assess the following PIO question: In adult patients treated with an indication for single tooth extraction in the maxillary esthetic zone (15-25), what is the influence of an immediate implant placement and immediate loading protocol on the clinical performance (primary aim) and esthetic outcomes (secondary aim) focusing on investigations published after 2010. MATERIAL AND METHODS: An electronic search in Medline (PubMed), the Cochrane Central Register of Controlled Trials, and EMBASE databases up to April 2022 was performed to identify clinical studies investigating the outcome of single implants subjected to immediate placement with immediate restoration/loading (Type 1A). RESULTS: Sixty-three studies (10 randomized controlled trials, 28 prospective and 25 retrospective cohort studies) were included with a follow-up ranging from 12 to 96 months. One thousand nine hundred sixty-one implants reported survival rates of 99.2 (98.6-99.5) % at 1 year, 97.5 (95.9-98.4) % after 3 years, and 95.8 (93.3-97.4) % after 5 years; 1064 immediately loaded restorations presented survival rates of 98.9 (97.8-99.5) % after 1 year, 96.8 (93.6-98.4) % after 2 years, and 94.8 (89.6-97.4) % after 5 years. Comparing baseline to 12-month data using the Hedges' g effect size (95% CI), papilla height presented an overall effect size of -0.71 (-1.25, -0.1) mm, midfacial recession change of -0.15 (-0.66, 0.36) mm, and a 0.82 (0.37, 1.28) gain in PES. CONCLUSIONS: Immediate implant placement and immediate loading can be considered a predictable and safe treatment option for single maxillary anterior restorations with adequate survival rates and favorable esthetics outcomes for up to 5 years.

Group 5 ITI Consensus Report: Implant placement and loading protocols.

OBJECTIVES: Working Group 5 was convened to discuss and find consensus on the topics of implant placement and loading protocols associated with single missing teeth in the anterior maxilla (aesthetic zone). Consensus statements, clinical recommendations, patient perspectives and future research suggestions were developed and presented to the plenary for discussion and approval. MATERIALS AND METHODS: Two systematic reviews were developed and submitted prior to the conference. The group considered in detail the systematic reviews and developed statements, clinical recommendations, patient perspectives and future research suggestions based on the findings of the reviews and experience of group members. Definitive versions were developed after presentation to and discussion by the plenary. RESULTS: Five consensus statements were developed and approved from each systematic review. Twelve clinical recommendations were developed by the group based on both reviews and experience. Three patient perspectives were developed, and five suggestions made for future research. CONCLUSIONS: Based on the findings of the systematic reviews and experience of group members, the Type 1A protocol (immediate placement and immediate loading), when utilized in the anterior maxilla under favorable conditions, is considered predictable and is associated with high survival rates. The procedure is considered clinically viable and is associated with aesthetic outcomes, although surgical, technical, and biological complications can occur.

Dental status and its correlation with polypharmacy and multimorbidity in a Swiss nursing home population: a cross-sectional study.

OBJECTIVE: To assess the correlation between oral health status in terms of present teeth, implants, removable prostheses, and polypharmacy and/or multimorbidity in three Swiss nursing homes with affiliated or integrated dental care. METHODS: A cross-sectional study was conducted in three Swiss geriatric nursing homes with integrated dental care. Dental information consisted of the number of teeth, root remnants, implants, and presence of removable dental prostheses. Furthermore, the medical history was assessed in terms of diagnosed medical conditions and prescribed medication. Age, dental status, polypharmacy, and multimorbidity were compared and correlated using t-tests and Pearson correlation coefficients. RESULTS: One hundred eighty patients with a mean age of 85.5 ± 7.4 years were included of which a portion of 62% presented with multimorbidity and 92% with polypharmacy. The mean number of remaining teeth and remnant roots were 14.1 ± 9.9 and 1.0 ± 3.1, respectively. Edentulous individuals comprised 14%, and over 75% of the population did not have implants. Over 50% of the included patients wore removable dental prostheses. A negative correlation with statistical significance (p = 0.001) between age and tooth loss (r = - 0.27) was observed. Finally, there was a non-statistically correlation between a higher number of remnant roots and specific medications linked to salivary dysfunction; specifically antihypertensive medication and central nervous system stimulants. CONCLUSION: The presence of a poor oral health status was associated with polypharmacy and multimorbidity among the study population. CLINICAL RELEVANCE: Identifying elderly patients in need of oral healthcare in nursing homes is a challenge. In Switzerland, the collaboration of dentists and nursing staff is still improvable, but is urgently needed due to the demographic changes and raising treatment demand of the oldest portion of the population.

Tactile misfit detection ability at the implant-abutment interface of internal connection dental implants: an in-vitro study.

OBJECTIVE: The aim of this in-vitro study was to investigate the tactile assessment ability at the implant impression-taking stage. METHODS: Thirty clinicians (18 novices, 12 experts) were included for a tactile fit assessment by using a used/new probe (tip diameter 100 µm/20 µm). Six implant replicas and related impression copings of two internal connection implant systems were used, each with a perfect fit (0 µm) and defined vertical micro gaps of 8, 24, 55, 110 and 220 µm at the interface. Statistical analysis was performed using descriptive methods and non-parametric tests with a focus on specificity (ability to detect perfect fit), sensitivity (ability to detect misfit), and predictive values. P-values <5% were considered statistically significant. RESULTS: The tactile assessment showed a mean total sensitivity for the Straumann and Nobel Biocare systems of 83% and 80% with a used probe, and 91% and 92% with a new probe, respectively. The mean total specificities were 33% and 20% with a used probe and 17% and 3% with a new probe, respectively. No statistical significance was observed between novice and expert clinicians concerning their tactile assessment ability. CONCLUSIONS: The ability to detect a perfect fit (specificity) with a probe was very poor for both implant systems and impaired with the use of a new probe. The use of a new probe improved the gap detection ability (sensitivity) significantly at the expense of the specificity. A combination of additional chairside techniques with training and calibration could improve clinicians' ability to correctly assess the fit/misfit at the implant-abutment interface.

Which clinical and laboratory procedures should be used to fabricate digital complete dentures? A systematic review.

STATEMENT OF PROBLEM: Digital workflows for digital complete denture fabrication have a variety of clinical and laboratory procedures, but their outcomes and associated complications are currently unknown. PURPOSE: The purpose of this systematic review was to evaluate the clinical and laboratory procedures for digital complete dentures, their outcomes, and associated complications. MATERIAL AND METHODS: Electronic literature searches were conducted on PubMed/Medline, Embase, and Web of Science for studies published from January 2000 to September 2022 and screened by 2 independent reviewers. Information on digital complete denture procedures, materials, their outcomes, and associated complications was extracted. RESULTS: Of 266 screened studies, 39 studies were included. While 26 assessed definitive complete dentures, 7 studies assessed denture bases, 2 assessed trial dentures, and 4 assessed the digital images only. Twenty-four studies used border molded impression technique, 3 studies used a facebow record, and 7 studies used gothic arch tracing. Only 13 studies performed trial denture placement. Twenty-one studies used milling, and 17 studies used 3D printing for denture fabrication. One study reported that the retention of maxillary denture bases fabricated from a border-molded impression (14.5 to 16.1 N) was statistically higher than the retention of those fabricated from intraoral scanning (6.2 to 6.6 N). The maximum occlusal force of digital complete denture wearers was similar across different fabrication procedures. When compared with the conventional workflow, digital complete dentures required statistically shorter clinical time with 205 to 233 minutes saved. Up to 37.5% of participants reported loss of retention and up to 31.3% required a denture remake. In general, ≥1 extra visit and 1 to 4 unscheduled follow-up visits were needed. The outcomes for patient satisfaction and oral health-related quality of life were similar between conventional, milled, and 3D-printed complete dentures. CONCLUSIONS: Making a border-molded impression is still preferred for better retention, and trial denture placement is still recommended to optimize the fabrication of definitive digital complete dentures.

Indirect repair of saliva-contaminated materials using veneering ceramics.

PURPOSE: To analyze the in vitro efficacy of a surface conditioning liquid facilitating ceramic repairs of saliva-contaminated metal-ceramic and all-ceramic restorations. MATERIALS AND METHODS: Specimens constructed from nonprecious alloy (NPA), precious alloy (PA), lithium-disilicate (LD), zirconia (ZI), veneering ceramics for zirconia (VZI), veneering ceramics for lithium-disilicate (VLD), and veneering ceramics for metal alloys (VM) were manufactured (total: n = 168; each material n = 24). Veneering ceramic cylinders (thickness: 2 mm) were hand-layered on top of the specimens. Shear bond strength (SBS) tests were performed, measuring the maximum bond strength (MBS) of the cylinders on the specimens. Following this, the specimens were artificially aged and stored in artificial saliva for 30 days at 37°C. After physical cleaning using aluminum oxide air abrasion, a new surface conditioning liquid was applied (test, n = 84) or not (control, n = 84). New ceramic cylinders were hand-layered followed by a second SBS test. Descriptive statistics, linear regression analyses, and a one-sample t-test (α = 0.05) were used to ascertain the differences within (prerepair vs. postrepair) and between the groups. RESULTS: All specimens in the test group could be repaired, whereas 18 repairs in the control group failed. After the repairs, an MBS decrease was observed for the NPA specimens of the control group (-15.5 MPa, p = 0.004) but not among any of the test groups. Comparing the change in MBS between the test and control groups, the reduction was significantly higher in the repaired NPA specimens of the control group (mean difference 11.8 MPa, p = 0.017). CONCLUSIONS: Using the analyzed surface conditioning liquid, metal-ceramic and all-ceramic materials can be repaired, while some repairs failed without the liquid. The initial bond strengths between core and veneering materials could be restored in all specimens when the new surface conditioning liquid was applied.

Effect of coffee thermal cycling on the surface properties and stainability of additively manufactured denture base resins in different layer thicknesses.

PURPOSE: To compare the effect of coffee thermal cycling on surface roughness (Ra), Vickers microhardness (MH), and stainability of denture base resins additively manufactured in different layer thicknesses with those of subtractively manufactured denture base materials. MATERIALS AND METHODS: Eighty disk-shaped specimens (Ø10×2 mm) were fabricated from two subtractively (Merz M-PM [SM-M] and G-CAM [SM-G]) and three additively (NextDent 3D+ [50 µm, AM-N-50; 100 µm, AM-N-100], FREEPRINT Denture [50 µm, AM-F-50; 100 µm, AM-F-100], and Denturetec [50 µm, AM-S-50; 100 µm, AM-S-100]) manufactured denture base materials (n = 10). Ra measurements were performed before and after polishing by using a non-contact optical profilometer, while MH values and color coordinates were measured after polishing. Specimens were then subjected to 5000 cycles of coffee thermal cycling, all measurements were repeated, and color differences (ΔE00) were calculated. A linear mixed effect model was used to analyze Ra and MH data, while one-way analysis of variance was used to analyze ΔE00 data (α = 0.05). Ra values were further evaluated according to a clinically acceptable threshold of 0.2 µm, while ΔE00 values were evaluated according to perceptibility (1.72 units) and acceptability (4.08 units) thresholds. The interaction between the material type and the time interval affected both Ra and MH (p ≤ 0.001). Tested materials had their highest Ra before polishing (p ≤ 0.029). Before polishing, AM-F-100 had the highest, and SM-M and SM-G had the lowest Ra (p < 0.001). After polishing and after coffee thermal cycling, SM-G mostly had lower Ra than those of other materials (p ≤ 0.036). SM-G mostly had higher MH than that of other materials before and after coffee thermal cycling (p ≤ 0.025). Coffee thermal cycling reduced the MH of SM-M and increased that of AM-S-100 (p ≤ 0.024). AM-N-100 had higher ΔE00 than AM-F, AM-S-100, and SM-G (p ≤ 0.009), while AM-F and SM-G had lower ΔE00 than AM-S-50 and AM-N-50 (p ≤ 0.024). CONCLUSIONS: Polishing reduced the surface roughness of all materials, whereas the effect of coffee thermal cycling was nonsignificant. Most of the tested materials had acceptable surface roughness after polishing and after coffee thermal cycling according to the reported threshold. Layer thickness only affected the microhardness of tested additively manufactured resins, which was material-dependent. Subtractively manufactured specimens mostly had high microhardness and that of nonreinforced subtractively manufactured resin decreased after coffee thermal cycling. When reported color thresholds are considered, all materials had acceptable color stability.

Microleakage assessment of CAD-CAM Cobalt-Chrome and Zirconia abutments on a conical connection dental implant: A comparative in vitro study.

OBJECTIVE: To assess the marginal and bacterial microleakage in zirconia and CAD-CAM or cast Co-Cr implant abutments. METHODS: Sixty-four conical connection implants with their respective abutments were divided into four groups (Co-Cr (milled, laser-sintered, and cast) and Zirconia (milled)). All specimens were subjected to a chewing simulation and thermocycling. After aging process, specimens were submerged in a 0.2% methylene blue solution with Porphyromonas gingivalis (P.g) for 48 h. The marginal microleakage was measured using a 40× optical microscopy at the internal part of the implant, and when positive microleakage was observed, a DNA isolation with a polymerase chain reaction (PCR) test was used. The microbiological assessment was based on colony forming units (CFUs). RESULTS: Thirty (47%) implant-abutments presented microleakage and the PCR was performed on those specimens (1 Zirconia, 1 Co-Cr milled, 14 Co-Cr laser-sintered and 14 cast). Seven specimens (1 Co-Cr laser-sintered and six cast) presented values below the PCR detection limit (< 100 CFUs). The lowest CFUs count occurred in the Co-Cr milled group (5.17E+02 CFUs/ml) followed by zirconia (7.70E+03 CFUs/ml). The Co-Cr cast (9.39E+03 CFUs/ml) and laser-sintered (2.4E+05 CFUs/ml) groups had higher bacterial count. The CFU count comparison performed between Co-Cr cast and laser-sintered resulted in a statistically significant differences in favor of Co-CrCL (p < .05). CONCLUSIONS: The abutment material and fabrication technique affected the implant-abutment microleakage. Although the CAD-CAM abutments presented favorable results, all tested groups presented microleakage.

Clinical performance of tooth implant-supported removable partial dentures: a systematic review and meta-analysis.

OBJECTIVE: To assess the clinical performance of tooth implant-supported removable partial dentures in terms of abutment survival in relation to the attachment system used. METHODS: An electronic search in MEDLINE/PubMed Web of Science and Cochrane Central Register of Controlled Trials databases was performed. The methodological quality of the studies was assessed using the Newcastle-Ottawa Scale. Survival rates after 3 years and 5 years, loss, and complication rates per 100 years were estimated by Poisson regression. RESULTS: A total of twelve studies were included; eleven studies were used for the meta-analysis. Survival analysis for mixed attachments showed an estimated survival rate of 100% after 3 years and 5 years. For uniform attachments, the estimated survival rate was 99.3% after 3 years and 98.8% after 5 years. Tooth abutment survival analysis for mixed attachments estimated a survival rate of 95% after 3 years and 91.7% after 5 years: Uniform attachments reached a survival rate of 97.2% after 3 years and 95.4% after 5 years. The prosthetic survival rate was 100% for mixed and uniform abutments after 3 years and 5 years of function. CONCLUSIONS: Tooth implant-supported removable partial dentures can be considered as a reliable option with excellent prosthetic and implant survival rates and favorable rates for the abutments after 3-year and 5-year follow-ups. Complications may be reduced when 5 or more abutments are used. CLINICAL RELEVANCE: Tooth implant-supported removable partial dentures are a favorable and potential alternative to restore a partially edentulous arch by optimizing the number and distribution of abutments.

Hyaluronic acid injection to restore the lost interproximal papilla: a systematic review.

OBJECTIVES: To assess the efficacy and safety of hyaluronic acid (HA) injections to restore the lost interproximal papilla. MATERIALS AND METHODS: A systematic literature search was conducted in PubMed/MEDLINE, Scopus and Cochrane electronic databases with no time restriction up to September 2021. Any clinical study evaluating HA injection into the interproximal papilla loss Class I and II according to Norland & Tarnow, were included based on the following PICO questions (1) Are HA injections effective for the reconstruction of the interproximal papilla loss? (2) What are the side/adverse effects of using HA for the reconstruction of interproximal papilla loss? The risk of bias assessment was performed using the Cochrane Collaboration's the Newcastle Ottawa and Joanna Briggs institute tools. RESULTS: A total of 1497 titles were retrieved. From these, eleven were included and underwent full data extraction. However, due to heterogeneity in the data among the included articles, a meta-analysis could not be performed. Three articles reported no-differences in term of papilla tip to contact point distance or the papilla fill reduction. Finally, five studies showed a reduction in the black triangle with a percentage range between 19 and 47%. CONCLUSION: The non-surgical use of HA injection seems to have a positive effect on the re-establishment of interproximal papilla lost. However post-operative complications might develop.

Patient-reported outcomes in patients with severe maxillary bone atrophy restored with zygomatic implant-supported complete dental prostheses: a systematic review.

Introduction and Objective: Zygomatic implants (ZI) offer a good and predictable alternative to reconstructive procedures of atrophic maxillae. The main objetive of this systematic review was to assess the effect of rehabilitation with zygomatic implants on patient's quality of life (QLP) using Patient Reported Outcomes Measures (PROMs).Materials and Methods: This review followed PRISMA guidelines. An automated electronic search was conducted in four databases supplemented by a manual search for relevant articles published until the end of January 2021. The Cochrane Collaboration Risk of Bias tool and the Newcastle-Ottawa Quality Assessment Scale were used to assess the quality of evidence in the studies reviewed.Results: General findings of this systematic review showed substantial increases in Oral health-related quality of life (OHRQoL) among patients restored with ZI and high scores in terms of general satisfaction, especially in chewing ability and esthetics. An overall survival rate of ZI was 98.3% after a mean follow-up time of 46.5 months was observed. Occurrence of 13.1% biological complications and 1.8% technical complications were reported.Conclusions: Patients rehabilitated with zygomatic implant-supported complete dental prostheses showed substantial improvements in OHRQoL and general satisfaction with the treatment received.

The influence of age and gender on perception of orofacial esthetics among laypersons in Switzerland.

OBJECTIVE: The purpose of this study was to evaluate the perception and role of orofacial esthetics by laypersons, and how attitudes may be correlated with age and gender in Switzerland. MATERIAL AND METHODS: Self-administrated questionnaires (SAQ) were distributed both conventionally and digitally to Swiss residents over 16 years of age (range 16-99 years). The participants were identified in the medical practice, at an open house of the ZMK Bern, in elderly care centers, and via the internet (Facebook and Instagram). To verify that the participants were Swiss residents and laypersons, they were checked by an operator (conventional) or were provided an exact description of eligible participants at the beginning of the SAQ (digital). The SAQ included 30 questions with multiple-choice responses and visual analogue scales (0-100) divided into four sections regarding dental appearance with respect to body esthetics, partner selection, employment and career opportunities, and overall health/quality-of-life. For statistical analysis, respondents were segregated into two age groups (<25 years and ≥25 years) and into two gender groups (male and female). Descriptive analyses, the Fisher exact test, and Welch's t-test were applied (α = 0.05). RESULTS: Five hundred and two laypersons completed the SAQ. The study's hypothesis-that various age groups and genders have different perceptions of dental esthetics-was supported. The willingness to correct one's own dentition was lower among older participants (OR: 0.54; p = 0.001); charisma and dental esthetics were considered equally important with a trend toward charisma in both age groups (p = 0.003). The belief that excellent dentition improves employment chances at a job interview (OR: 0.47; p = 0.0003) was significantly lower among older participants, and the belief that dental correction would improve quality-of-life was significantly higher among older participants (OR: 1.81; p = 0.001). The assumption that individuals with attractive teeth appear happier was significantly lower among older respondents (OR: 0.67; p = 0.03). Women were less satisfied with their dental appearance and, proportionally, their willingness to receive correction was significantly higher (OR: 1.79; p = 0.01 and OR: 1.77; p = 0.002 relative to men, respectively). Moreover, male participants had a lower desire to have brighter teeth and undergo bleaching treatments (OR: 0.54; p = 0.002; OR: 0.53; p = 0.002). The proportion of men believing that having beautiful teeth improves attractiveness and employment chances was significantly lower (OR: 0.33; p = 0.02 and OR: 0.66; p = 0.04; respectively). CONCLUSIONS: Within the limitations of this observational study, it was concluded that age and gender of laypersons in Switzerland have a significant impact on the perception of dental esthetics. CLINICAL SIGNIFICANCE: Evaluating and quantifying perceptions of dental esthetics for daily life across various age groups and genders can improve clinicians' understanding of individual needs in order to offer patient-oriented dental care.

Fabrication of an implant-retained overdenture with ceramic crowns cemented on a polyetherketoneketone framework: A clinical report.

This clinical report describes the treatment of a complex intraoral situation by fabricating a maxillary implant-retained overdenture with a high-performance polymer (polyetherketoneketone) framework and lithium disilicate crowns and mandibular tooth- and implant-supported ceramic restorations. No complications were noted in 2 years, and the patient was satisfied with function and esthetics.

Clinical performance of implant crowns with customized zirconia abutments: A prospective cohort study with a 4.5- to 8.8-year follow-up.

OBJECTIVE: To assess the clinical and esthetic outcomes and patient satisfaction of screw-retained one-piece implant crowns fabricated with zirconia abutments after a 4.5- to 8.8-year follow-up. MATERIAL AND METHODS: Thirty-two patients (12 women and 20 men), who received 40 implant single crowns in anterior and premolar sites, were included in this prospective study. All restorations were based on ceramic hand-veneered customized CAD/CAM zirconia abutments. The follow-up consisted of clinical and radiological examinations. The pink esthetic score-white esthetic score (PES-WES) was used to evaluate the esthetic outcome. Patients' satisfaction was assessed via visual analog scale (VAS). RESULTS: Implant and prosthetic survival rates were 100% and 97.5%, respectively. Mean marginal bone loss was -0.17 mm (SD 1.16 mm). Probing depth was ≤4 mm in 98.7% and 5 mm in 1.3% of the sites; 8.3% of them were bleeding on probing positive. No technical or biological complications were observed except for one abutment fracture. The mean PES-WES scores were 7.0 and 7.1, respectively. VAS scores (10-point) of 9.41 for function and 9.26 for esthetics showed high patient satisfaction. CONCLUSION: After a mean observation period of 6 years and 7 months, screw-retained implant crowns based on veneered customized CAD/CAM zirconia abutments with conical connection showed very good clinical performance and may be recommended for the replacement of missing anterior and premolar teeth. (ClinicalTrials.gov # NCT04370314).

Dental students' preference and perception on intraoral scanning and impression making.

BACKGROUND: To investigate the preference and perception on intraoral scanning and impression making among dental students. METHODS: Final-year dental students from the 2019 and 2020 cohorts were invited to complete an online questionnaire via Google-Form. Their preference on the intraoral-scanning/impression making techniques and their perception on these techniques including the ease of defect identification, ease of infection control, need of chairside support, ease to master the technique as a beginner, efficiency in their hands and ease to handle the scanner software (yes/no) were collected. The results were analysed using McNemar tests and binary logistic regression test. All tests were performed at significance level α = 0.05. RESULTS: Ninety-seven students participated in this study with a response rate of 96.0 %. Eighty-one students (83.5 %) have tried intraoral scanning on peers. Fifty-three (54.6 %) students preferred intraoral-scanning and were categorized as Pro-scanning group. Forty-four (45.4 %) students either preferred impression-making (n = 21) or not sure (n = 23) were categorized as Others. More than half of students in both groups felt that intraoral-scanning is easier to identify defect, easier in infection control and require less chairside support. Higher proportion of students in the Pro-scanning group felt that intraoral-scanning requires less chairside support, easier to master as a beginner, more efficient in their hands and they can deal well with the scanner software than that in Others (P < 0.05). Regression shown that students preferred a technique that they perceived is more efficient (P = 0.000). CONCLUSIONS: While intraoral scanning has perceived advantages, many students still prefer impression making that works more efficient to them.

Digital workflow for implant-supported fixed complete dentures based on backwards planning in an edentulous patient.

AIM: This case report describes a digital workflow for prosthetically driven surgical planning, implant placement, and the fabrication of two screw-retained, complete-arch, implant-supported dentures in an edentulous patient. The purpose of this case report is to present and discuss the digital steps in the workflow, especially the scanning technique to obtain the centric relation, through a clinical case. The limitations of the workflow are also discussed. MATERIALS AND METHODS: Static computer-aided implant surgery (s-CAIS) was planned three-dimensionally, based on cone beam computed tomography, intraoral optical scanning, and digital bite registration. Using s-CAIS, four and six implants were placed in the edentulous mandible and maxilla, respectively. The final screw-retained complete-arch monolithic zirconia restorations were manufactured based on a digital workflow, using the pre-existing modified radiologic guide for the digital maxillomandibular record. CONCLUSIONS: The evolution of digital processing methods allows for design, processing, and fabrication of implant-supported fixed complete dentures using a surgical, prosthetic, and technical workflow based on 3D restorative backward planning. A digital prosthetic setup and CAD/CAM can be used for the fabrication of intraoral try-ins that serve as a model for the final monolithic zirconia superstructure.

Photogrammetric and Intraoral Digital Impression Technique for the Rehabilitation of Multiple Unfavorably Positioned Dental Implants: A Clinical Report.

The aim of this clinical report is to describe the use of the photogrammetric system and intraoral scanning as a reliable technique to record the 3-dimensional implant positions of a full-arch maxillary implant-supported fixed rehabilitation in which the implants were unfavorably positioned. The stereo camera of the photogrammetric system was used to capture the 3-dimensional panoramic position of the implants. The information on soft tissues was obtained with an intraoral scanner. Then, the 2 digital files (standard tessellation language [STL] files) were subsequently superimposed using a best-fit alignment function to generate the definitive digital model with information on teeth, soft tissues, and implants.

An integration protocol for aligning intraoral scans to facial scans using the nasal geometry reference in a fully dentate patient.

Advanced digital technologies have rapidly been integrated into prosthodontics to improve the digital workflow for prosthetic rehabilitation. The integration of 3D datasets acquired from various imaging sources such as intraoral scanners and facial optical scanners allows the creation of virtual patients to perform presurgical simulation and prosthetic rehabilitation. The presented technique introduced a straightforward protocol for aligning intraoral scans (Trios 4, 3Shape) to optical face scans (Face Hunter, Zirkonzahn) using a global best-fit algorithm of 3D evaluation software (GOM Inspect). Nasal geometry data were used as the matching reference to produce virtual dental patients. This integration protocol ensured that the intraoral scanner (Trios 4, 3Shape) was used not only to scan dental arches but also used effectively to scan the nose. These scans along with professional facial scans can be successfully aligned to produce virtual dental patients. As only a single fully dentate patient case with an alignment deviation of 243.6 µm was used, further research to evaluate the accuracy of this protocol is needed.