Insights into the Complexation Mechanism of a Promising Lipophilic PyTri Ligand for Actinide Partitioning from Spent Nuclear Fuel.

The challenging issue of spent nuclear fuel (SNF) management is being tackled by developing advanced technologies that point to reduce environmental footprint, long-term radiotoxicity, volumes and residual heat of the final waste, and to increase the proliferation resistance. The advanced recycling strategy provides several promising processes for a safer reprocessing of SNF. Advanced hydrometallurgical processes can extract minor actinides directly from Plutonium and Uranium Reduction Extraction raffinate by using selective hydrophilic and lipophilic ligands. This research is focused on a recently developed N-heterocyclic selective lipophilic ligand for actinides separation to be exploited in advanced Selective ActiNide EXtraction (SANEX)-like processes: 2,6-bis(1-(2-ethylhexyl)-1H-1,2,3-triazol-4-yl)pyridine (PyTri-Ethyl-Hexyl-PTEH). The formation and stability of metal-ligand complexes have been investigated by different techniques. Preliminary studies carried out by electrospray ionization mass spectrometry (ESI-MS) analysis enabled to qualitatively explore the PTEH complexes with La(III) and Eu(III) ions as representatives of lanthanides. Time-resolved laser fluorescence spectroscopy (TRLFS) experiments have been carried out to determine the ligand stability constants with Cm(III) and Eu(III) and to better investigate the ligand complexes involved in the extraction process. The contribution of a 1:3 M/L complex, barely identified by ESI-MS analyses, was confirmed as the dominant species by TRLFS experiments. To shed light on ligand selectivity toward actinides over lanthanides, NMR investigations have been performed on PTEH complexes with Lu(III) and Am(III) ions, thereby showing significant differences in chemical shifts of the coordinating nitrogen atoms providing proof of a different bond nature between actinides and lanthanides. These scientific achievements encourage consideration of this PyTri ligand for a potential large-scale implementation.

Shape and Temperature Expansion of Free Volume Holes in Some Cured Polybutadiene-Polyisoprene Rubber Blends.

The free volume fraction of a macromolecular structure can be assessed theoretically by using a suitable model; however, it can also be evaluated from experimental data obtained from dilatometry and positron annihilation lifetime spectra. In this second case, a regular geometry of the sub-nanometric cavities forming the free volume has to be assumed, although in fact they are irregularly shaped. The most popular approach is to guess spherical holes, which implies an isotropic growth of these last with temperature. In this work, we compared the free volume fraction, as obtained from experiments in a set of polybutadiene and polyisoprene cured rubbers and their blends, with the analogous quantity expected by using the lattice-hole model. The results allowed us to obtain insights on the approximate shape of the holes. Indeed, a cylindrical flattened geometry of the cavities produced a better agreement with the theory than the spherical shape. Furthermore, the best fit was obtained for holes that expanded preferentially in the radial direction, with a consequent decrease of the aspect ratio with temperature.

Activation of the Aromatic Core of 3,3'-(Pyridine-2,6-diylbis(1H-1,2,3-triazole-4,1-diyl))bis(propan-1-ol)-Effects on Extraction Performance, Stability Constants, and Basicity.

The "CHON" compatible water-soluble ligand 3,3'-(pyridine-2,6-diylbis(1H-1,2,3-triazole-4,1-diyl))bis(propan-1-ol) (PTD) has shown promise for selectively stripping actinide ions from an organic phase containing both actinide and lanthanide ions, by preferential complexation of the former. Aiming at improving its complexation properties, PTD-OMe was synthesized, bearing a methoxy group on the central pyridine ring, thus increasing its basicity and hence complexation strength. Unfortunately, solvent extraction experiments in the range of 0.1-1 mol/L nitric acid proved PTD-OMe to be less efficient than PTD. This behavior is explained by its greater pKa value (pKa = 2.54) compared to PTD (pKa = 2.1). This counteracts its improved complexation properties for Cm(III) (log ß3(PTD-OMe) = 10.8 ± 0.4 versus log ß3(PTD) = 9.9 ± 0.5).

Time-Resolved Laser Fluorescence Spectroscopy Study of the Coordination Chemistry of a Hydrophilic CHON [1,2,3-Triazol-4-yl]pyridine Ligand with Cm(III) and Eu(III).

The complexation of Cm(III) and Eu(III) with the novel i-SANEX complexing agent 2,6-bis[1-(propan-1-ol)-1,2,3-triazol-4-yl]pyridine (PTD) was studied by time-resolved laser fluorescence spectroscopy (TRLFS). The formation of 1:3, 1:2, and 1:1 metal/ligand complexes was identified upon increasing PTD concentration in 10-3 mol/L HClO4 and in 0.44 mol/L HNO3 solutions. For all these complexes, stability constants were determined at different acid concentrations. Though under the extraction conditions proposed for an An/Ln separation process, that is, for 0.08 mol/L PTD in 0.44 mol/L HNO3, 1:3 complexes represent the major species, a significant fraction of 1:2 complexes was found. This is caused by ligand protonation, and results in lower Eu(III)/Am(III) separation factors compared to SO3-Ph-BTP, until now considered the i-SANEX reference ligand. Focused extraction studies performed at lower proton concentration, where the 1:3 complex is formed exclusively, confirm this assumption.

Hydrophilic Clicked 2,6-Bis-triazolyl-pyridines Endowed with High Actinide Selectivity and Radiochemical Stability: Toward a Closed Nuclear Fuel Cycle.

There is still an evident need for selective and stable ligands able to separate actinide(III) from lanthanide(III) metal ions in view of the treatment of the accumulated radioactive waste and of the recycling of minor actinides. We have herein demonstrated that hydrophilic 2,6-bis-triazolyl-pyridines are able to strip all actinides in all the different oxidation states from a diglycolamide-containing kerosene solution into an acidic aqueous phase. The ascertained high actinide selectivity, efficiency, extraction kinetics, and chemical/radiolytic stability spotlight this hydrophilic class of ligands as exceptional candidates for advanced separation processes fundamental for closing the nuclear fuel cycle and solving the environmental issues related to the management of existing nuclear waste.

Promising Lipophilic PyTri Extractant for Selective Trivalent Actinide Separation from High Active Raffinate.

Within a spent nuclear fuel recycling strategy, in the past few years, the pyridine-bis-triazole unit was found to be rather effective and selective in minor actinide (MA) separation from synthetic high active raffinate (HAR). In this research work, the main features of the recently studied PTEH ligand were investigated in order to evaluate its potentialities in SANEX-like processes. Its applicability in advanced separation processes was demonstrated, even at process temperatures. It manifested satisfactory extraction properties for a successful selective An separation from Ln, easy cation release, and adequate extraction kinetics as well as outstanding hydrolytical and radiolytical stability. All the results collected in this work allowed the scientists on the committee of the H2020 GENIORS project to promote PTEH as a concrete alternative to the reference CyMe4-BTBP ligand.

Deep Eutectic Solvents: Promising Co-solvents to Improve the Extraction Kinetics of CyMe4-BTBP.

In this communication, we report on the use of deep eutectic solvents (DESs) for processing nuclear waste, with a view to selectively recovering minor actinides (MA) from highly active raffinate solutions. DESs are an interesting new class of green and eco-sustainable solvents. Herein, a representative family of DES was tested as a co-solvent for MA/lanthanides partitioning based on Selective ActiNide EXtraction (SANEX)-like hydrometallurgical processes. The reference system exploits the CyMe4-BTBP lipophilic extractant for selective MA recovery, but the slow kinetics is the main limitation toward the industrial implementation. A selection of hydrophilic DESs has been proposed as a phase transfer catalyst and tested to improve the process performances. In this work, the radiochemical stability and the extraction behavior of these DESs have been ascertained. Moreover, a preliminary optimization of system composition has been achieved. This study underlines a catalytic effect of DES that can be proficiently exploited to enhance CyMe4-BTBP extraction and selectivity.

Structural properties of the chelating agent 2,6-bis(1-(3-hydroxypropyl)-1,2,3-triazol-4-yl)pyridine: a combined XRD and DFT structural study.

The conformational isomerism of the chelating agent 2,6-bis(1-(3-hydroxypropyl)-1,2,3-triazol-4-yl)pyridine (PTD), exploited in fuel reprocessing in spent nuclear waste, has been studied by single crystal X-ray diffraction analysis in combination with an extensive DFT conformational investigation. In the solid-state, the elucidated crystal structure (i.e., not yet published) shows that by thermal treatment (DSC) no other phases are observed upon crystallization from the melt, indicating that the conformation observed by X-ray data is rather stable. Mapping of intermolecular and intramolecular noncovalent interactions has been used to elucidate the unusual arrangement of the asymmetric unit. Considerations relating to the stability of different conformational isomers in aqueous and non-aqueous solutions are also presented. The accurate structural description reported here might open various research topics such as the potential of PTD to act as an outer sphere ligand in the formation of second sphere coordination complexes and their interconversion by mechanochemical means.