Trends in Shoulder Arthroplasty in Israel.

BACKGROUND: The number of patients undergoing shoulder arthroplasty is increasing yearly. OBJECTIVES: To evaluate the results of a consecutive series of patients who underwent shoulder replacement for a variety of indications in a single medical center in Israel. METHODS: All shoulder arthroplasties performed in our institution between 2006 and 2015 were retrospectively reviewed. The functional outcomes and satisfaction of 180 shoulder arthroplasties were evaluated for objective and subjective parameters using the American Shoulder and Elbow Surgeons Shoulder Score (ASES), the Disabilities of the Arm, Shoulder and Hand (DASH) outcome measure, and the Short Form Health Survey (SF-12). RESULTS: The indications for surgery were osteoarthritis (n=35), rotator cuff arthropathy (n=32), fractures (n=99), and other reasons (n=14). The mean follow-up was 52 months. The scores improved markedly among the patients who underwent surgery later in the study period. The mean DASH score before 2012 was 48.8 and improved to 37.2 after 2013. The respective ASES also improved from 54.2 to 68.6. The use of hemiarthroplasty decreased from 85% to 33% as of 2013, while the use of total shoulder arthroplasty increased. CONCLUSIONS: Shoulder arthroplasty represents an effective treatment modality with satisfactory functional outcomes. Our current study demonstrates a shift from hemiarthroplasty to total shoulder arthroplasty, with the number of procedures increasing yearly. Surgeon experience and the expanding volume of operations had a direct positive effect on the functional outcomes of shoulder arthroplasties.

Biomechanical evaluation of suture buttons versus cortical screws in the Latarjet-Bristow procedure: a fresh-frozen cadavers study.

INTRODUCTION: A commonly used method of fixation of the transferred coracoid in the traditional Latarjet-Bristow procedure (open or arthroscopic) is by two bicortical screws. Although mechanically effective, screw fixation is also a major source of hardware and neurologic complications. This study aimed to compare the biomechanical performances of traditional metal screws and endobuttons as fixators of the Latarjet-Bristow procedure. MATERIALS AND METHODS: Nine fresh-frozen cadaveric human scapulae with the conjoined tendon attached to the coracoid process were used for the Latarjet-Bristow procedure. The specimens were randomly assigned one of two groups: fixation using two 4.5-mm cannulated partially threaded Latarjet-Bristow experience screws or fixation using a suture-button construct. Specimens were secured in a material testing machine and cyclically preconditioned from 2 to 10 N at 0.1 Hz for ten cycles. They were then pulled to failure at a normalized displacement rate of 400% of the measured gauge length per minute. The maximal load-to-failure, stiffness and stress were calculated using a custom script. The failure mechanism and site were recorded for each specimen. RESULTS: There were no significant differences in the maximal load-to-failure or other biomechanical properties of the two fixation techniques, but the failure mechanisms were unique to each one. Four specimens fixated with screws underwent graft failures (fracture) through the proximal or distal drill hole. Five specimens fixated with endobuttons underwent failure due to glenoid bone fractures. CONCLUSIONS: A single endobutton fixation appears to be biomechanically comparable to screw fixation in the Latarjet-Bristow procedure and provides a lower risk for graft fracture. Further studies with more numerous specimens are warranted to conclusively validate these findings.

Rotator interval closure has no additional effect on shoulder stability compared to Bankart repair alone.

PURPOSE: Arthroscopic Bankart repair (ABR) provides satisfactory results for recurrent anterior shoulder instability, but the high recurrence rate post-ABR remain a concern. One of the adjunct procedures proposed to improve ABR results is arthroscopic rotator interval closure (ARIC). This study prospectively evaluated the outcomes of ABRs alone compared to combined ABR + ARIC and identified risk factors related to failure of each procedure. METHODS: Thirty-nine consecutive patients (mean age 23.1 (18.3-37.5) years; 37 males) underwent arthroscopic stabilization for recurrent anterior traumatic shoulder instability. Twenty patients underwent ABR alone and 19 underwent ABR + ARIC. Remplissage was added when glenoid engagement was observed during surgery. All patients were prospectively followed, and their postoperative courses were reviewed and functionally assessed at the last visit. RESULTS: The re-dislocation rate was higher in the ABR + ARIC group compared to the ABR only group at a mean follow-up of 4.2 (2-5.6) years (3 vs. 0, P = 0.06). More subluxations were found in the ABR only group (2 vs. 1, respectively; P = 0.58). The final limitation of range of motion (ROM) compared with the preoperative ROM was similar in both groups. Remplissage procedures were performed more often in the ABR only group [12 (60%) vs. 4 (21%), P = 0.013]. CONCLUSIONS: ARIC performed as an adjunct to ABR showed no superiority in attaining value-added stability compared to ABR alone. Adding a remplissage procedure may achieve better stability. LEVEL OF EVIDENCE: Level 2.

Bicycle-Related Shoulder Injuries: Etiology and the Need for Protective Gear.

BACKGROUND: The popularity of bicycle riding for recreation, exercise and transportation has grown enormously in recent years, which has led to an increased incidence of bicycle-related injuries. While these injuries involve mainly the musculoskeletal system, data on shoulder-specific injuries incurred while bike riding are lacking. Classifying these shoulder injuries may provide insight and assistance in the creation and implementation of effective protective gear and measures. OBJECTIVES: To investigate the types and mechanisms of shoulder injuries among cyclists. METHODS: This study retrospectively examined all cyclists who incurred shoulder injuries while riding and were admitted to the emergency department and shoulder clinic between January 2008 and November 2013. The study included 157 subjects with various bicycle-related shoulder injuries treated with either conservative or surgical measures. RESULTS: Eighty-four percent of injuries were caused by a direct blow to the shoulder, 7% by falling on an outstretched hand, 6% were traction injuries, and 3% were due to hyperabduction. Nine different clinical types of injury were observed; the most common injuries were clavicle fractures (32%), followed by acromioclavicular joint dislocations (22%), rotator cuff tears (22%), and humeral fractures (8%). Fifty-one percent of subjects were managed with conservative care and the remaining patients required surgical interventions. CONCLUSIONS: Shoulder injuries incurred while riding a bicycle span the entire spectrum of shoulder injuries and often result in debilitating conditions. Although the use of helmets is increasing, there is currently no effective protective gear or measures to prevent riders from suffering shoulder injuries.

Timing matters: NSAIDs interfere with the late proliferation stage of a repaired rotator cuff tendon healing in rats.

INTRODUCTION: Rotator cuff (RC) tear is a common problem that causes pain and can limit shoulder function. Non-steroidal anti-inflammatory drugs (NSAIDs) are often prescribed for musculoskeletal pain, including the pain subsequent to RC repair. NSAIDs have been reported to affect bone metabolism and fracture healing(,) but there is little evidence about their effect on tendon healing. We investigated the effect of meloxicam (non-steroidal anti-inflammatory drug) on the healing of RC tendons when given immediately after surgical repair. MATERIALS AND METHODS: Thirty-nine rats underwent acute RC tear and repair. Group A (n = 13) received daily intraperitoneal (IP) injections of meloxicam for the first 10 postoperative days. Group B (n = 13) received IP injections of meloxicam starting from postoperative day 11. Group C (n = 13, controls) received daily IP injections of saline for 3 weeks. The animals were killed 3 weeks after surgery and the RC was evaluated by gross inspection, biomechanical testing and histological examination. RESULTS: Group B displayed a significantly lower mean maximal load at 3 weeks than group C (P = 0.02) and group A (P = 0.05). Stiffness was significantly lower in B group as compared to A group (P = 0.05). Qualitative examination of histology specimens did not disclose any apparent differences with respect to cellularity, vascularity, healing, and collagen orientation. CONCLUSIONS: We conclude that meloxicam decreases the biomechanical strength of repaired rat RCs when administered between 11 and 20 days after the repair.

Biceps Tenotomy Does not Affect the Functional Outcomes of Patients Treated with Spacer Implantation Due to Massive Irreparable Rotator Cuff Tears.

BACKGROUND: Lesions of the long head of the biceps (LHB) tendon are frequently associated with massive rotator cuff tears (RCT) and may be responsible for shoulder pain and disability. OBJECTIVE: This study aimed to evaluate functional outcomes of arthroscopic biodegradable spacer implantation with or without biceps tenotomy as treatment for persistent shoulder dysfunction and pain due to a massive irreparable RCT. METHODS: A total of 48 patients were implanted with the subacromial spacer using arthroscopic approach with or without biceps tenotomy. All patients were assessed for up to 12 months post-implantation and 18 patients were assessed for at least 24 months (and a maximum of 40 months). Improvement in shoulder function was assessed using Constant score. RESULTS: Subacromial spacer implantation was performed arthroscopically in 48 patients. The mean total Constant score increased from 36 at baseline to 67 points at 12 months post implantation. Patients who underwent LHB tenotomy in addition to the subacromial spacer presented similar improvement of their shoulder function and score compared to the group that was treated with the spacer alone. CONCLUSION: Current study demonstrates that spacer implantation in this patient population provides significant improvement in function and decreases the pain. Additional LHB tenotomy did not influence the postoperative results during the follow-up.

Arthroscopic findings of coexisting lesions with greater tuberosity fractures.

Proximal humerus fractures comprise approximately 5% of all fractures, with isolated greater tuberosity fractures accounting for approximately 20% of proximal humerus fractures. Although performing shoulder arthroscopy in situations including a fracture is technically demanding, it allows surgeons the opportunity to identify and treat other coexisting lesions that could have otherwise been missed. The incidence of these pathologies in combination with greater tuberosity fractures has not been established. This study aimed to identify the various types of pathologies that may coexist with greater tuberosity fractures but not be detected before fixation. Displaced 2-part greater tuberosity fractures were treated arthroscopically in the authors' department. All patients initially underwent diagnostic arthroscopy during which other coexisting pathologies were detected and assessed, including rotator cuff tears, labral tears (Bankart or superior labral anterior posterior lesions), or long head of the biceps pathologies. Twenty-four patients underwent arthroscopic (n=10) or arthroscopic-assisted (n=14) greater tuberosity reduction and fixation. Thirteen (54.2%) fragments were fully displaced. Four (16.7%) patients had fracture dislocation of the glenohumeral joint. The concomitant soft-tissue pathologies were identified and treated arthroscopically in 22 (92%) patients. Arthroscopic evaluation before greater tuberosity fracture fixation revealed a high percentage of concomitant soft tissue pathologies. These pathologies may be overlooked otherwise, but they are easily detected arthroscopically, enabling their treatment during the same procedure.