Thiazole: A Versatile Standalone Moiety Contributing to the Development of Various Drugs and Biologically Active Agents.

For many decades, the thiazole moiety has been an important heterocycle in the world of chemistry. The thiazole ring consists of sulfur and nitrogen in such a fashion that the pi (π) electrons are free to move from one bond to other bonds rendering aromatic ring properties. On account of its aromaticity, the ring has many reactive positions where donor-acceptor, nucleophilic, oxidation reactions, etc., may take place. Molecules containing a thiazole ring, when entering physiological systems, behave unpredictably and reset the system differently. These molecules may activate/stop the biochemical pathways and enzymes or stimulate/block the receptors in the biological systems. Therefore, medicinal chemists have been focusing their efforts on thiazole-bearing compounds in order to develop novel therapeutic agents for a variety of pathological conditions. This review attempts to inform the readers on three major classes of thiazole-bearing molecules: Thiazoles as treatment drugs, thiazoles in clinical trials, and thiazoles in preclinical and developmental stages. A compilation of preclinical and developmental thiazole-bearing molecules is presented, focusing on their brief synthetic description and preclinical studies relating to structure-based activity analysis. The authors expect that the current review may succeed in drawing the attention of medicinal chemists to finding new leads, which may later be translated into new drugs.

Nanoneurotherapeutics approach intended for direct nose to brain delivery.

CONTEXT: Brain disorders remain the world's leading cause of disability, and account for more hospitalizations and prolonged care than almost all other diseases combined. The majority of drugs, proteins and peptides do not readily permeate into brain due to the presence of the blood-brain barrier (BBB), thus impeding treatment of these conditions. OBJECTIVE: Attention has turned to developing novel and effective delivery systems to provide good bioavailability in the brain. METHODS: Intranasal administration is a non-invasive method of drug delivery that may bypass the BBB, allowing therapeutic substances direct access to the brain. However, intranasal administration produces quite low drug concentrations in the brain due limited nasal mucosal permeability and the harsh nasal cavity environment. Pre-clinical studies using encapsulation of drugs in nanoparticulate systems improved the nose to brain targeting and bioavailability in brain. However, the toxic effects of nanoparticles on brain function are unknown. RESULT AND CONCLUSION: This review highlights the understanding of several brain diseases and the important pathophysiological mechanisms involved. The review discusses the role of nanotherapeutics in treating brain disorders via nose to brain delivery, the mechanisms of drug absorption across nasal mucosa to the brain, strategies to overcome the blood brain barrier, nanoformulation strategies for enhanced brain targeting via nasal route and neurotoxicity issues of nanoparticles.

Vitamin E loaded resveratrol nanoemulsion for brain targeting for the treatment of Parkinson's disease by reducing oxidative stress.

Resveratrol, a potent natural antioxidant, possesses a wide range of pharmacological activities, but its oral bioavailability is very low due to its extensive hepatic and presystemic metabolism. The aim of the present study was to formulate a kinetically stable nanoemulsion (o/w) using vitamin E:sefsol (1:1) as the oil phase, Tween 80 as the surfactant and Transcutol P as the co-surfactant for the better management of Parkinson's disease. The nanoemulsion was prepared by a spontaneous emulsification method, followed by high-pressure homogenization. Ternary phase diagrams were constructed to locate the area of nanoemulsion. The prepared formulations were studied for globule size, zeta potential, refractive index, viscosity, surface morphology and in vitro and ex vivo release. The homogenized formulation, which contained 150 mg ml(-1) of resveratrol, showed spherical globules with an average globule diameter of 102 ± 1.46 nm, a least poly dispersity index of 0.158 ± 0.02 and optimal zeta potential values of -35 ± 0.02. The cumulative percentage drug release for the pre-homogenized resveratrol suspension, pre-homogenized nanoemulsion and post-homogenized nanoemulsion were 24.18 ± 2.30%, 54.32 ± 0.95% and 88.57 ± 1.92%, respectively, after 24 h. The ex vivo release also showed the cumulative percentage drug release of 85.48 ± 1.34% at 24 h. The antioxidant activity determined by using a DPPH assay showed high scavenging efficiency for the optimized formulation. Pharmacokinetic studies showed the higher concentration of the drug in the brain (brain/blood ratio: 2.86 ± 0.70) following intranasal administration of the optimized nanoemulsion. Histopathological studies showed decreased degenerative changes in the resveratrol nanoemulsion administered groups. The levels of GSH and SOD were significantly higher, and the level of MDA was significantly lower in the resveratrol nanoemulsion treated group.

A Cross-sectional Survey-based Study of Knowledge, Attitude, and Practice Towards Uses of Cosmetics and Cosmetovigilance in India.

Background: In India, the cosmetics industry has expanded significantly because of changing lifestyles and increased awareness. In terms of earning the most money from the personal care and cosmetics industry in 2021, India is ranked fourth globally. Many cosmetics sold in India include ingredients that cannot be used on humans. Objective: To assess knowledge, attitudes, and practice toward the uses of cosmetics and cosmetovigilance in India. Methods: A cross-sectional study was conducted, from April to May 2022, among the general population living in the Delhi NCR region, India. Study questionnaires (printed and survey link) were distributed in public as well as at workplaces for the survey. Results: Around 268 (54.78%) females and 223 (45.21%) males participated in the survey. Amongst the total respondents - 407 (83%) agreed that they are using cosmetic products on a daily basis, females 229 (85.44%), being the majority users compared to males 178 (80%), with a significant P value = 0.011. Most of the people reported side effects of shampoos - 7.13% (hair fall, hair thinning, dryness of the scalp, itching), followed by allergic reactions to moisturizers - 5.70%. Conclusion: Because of the right safety and effectiveness mentorship of cosmetics, regulatory agencies and stakeholders should adopt this broadly. Cosmetovigilance needs to be put into practice.

Box-Behnken supported validation of stability-indicating high performance thin-layer chromatography (HPTLC) method: An application in degradation kinetic profiling of ropinirole.

Stability-indicating high-performance thin-layer chromatographic (HPTLC) method for the analysis of ropinirole HCl was developed and validated as per the ICH guidelines. The method employed the mobile phase and toluene-ethyl acetate-6 M ammonia solution (5:6:0.5, v/v/v) was optimized with the help of a design expert. Densitometric analysis of ropinirole HCl was carried out in the absorbance mode at 250 and 254 nm. Compact spots for ropinirole HCl were found at R f value of 0.58 ± 0.02. The linear regression analysis data for the calibration plots showed R (2) = 0.9989 ± 0.0053 with a concentration range of 100-3000 ng spot(-1). The method was validated for precision, accuracy, ruggedness, robustness, specificity, recovery, limit of detection (LOD) and limit of quantitation (LOQ). The LOD and LOQ were 12.95 and 39.25 ng spot(-1) respectively. Drug was subjected to acidic, alkaline, oxidative, dry heat, wet heat and photo degradation stress. All the peaks of degradation products were well resolved from the standard drug peak with significant difference of R f. The acidic and alkaline stress degradation kinetics of ropinirole, were found to be in first order, showing high stability (t 1/2, 146.37 h(-1); t 0.9, 39.11 h(-1)) in the acidic medium and low stability (t 1/2, 97.67 h(-1); t 0.9, 14.87 h(-1)) in the alkaline environment.

An analysis of fatal adverse conditions in temporal association of COVID-19 vaccination to boost the safety of vaccination for COVID-19.

SARS-CoV-2, the causative agent of COVID-19, claimed multiple lives in a very short span of time. Seeing the urgency of situation, vaccines were developed in hitherto unseen time frame. Vaccines definitely passed the test of safety and efficacy in clinical trials, but post mass vaccination data revealed cases of fatal adverse conditions in the temporal association of vaccination. The temporal association does not guarantee that the fatality is due to vaccination, but at the same time, it does create a concern. To overcome this concern and improve the safety of vaccination, we reviewed literature and collected data of 15 studies comprising of total 22 cases of fatal adverse condition/death in the temporal association of COVID-19 vaccination. Analysis of these data shows that many persons (40.90%) who succumbed were previously healthy individuals. All those who died developed symptoms or were admitted to hospital within a period of 3 weeks after vaccination. 86.36% cases of death took place within a period of 3 weeks after vaccination/presentation/admission/intervention. Complications which lead to death were CVST, thrombocytopenia/thrombosis /VITT, DIC and haemorrhage in 81.18% of cases. 81.81% cases of death were noted in the temporal association with ChAdOx1 nCoV-19 vaccine. 68.18% persons developed symptoms after first dose. Death was more common in females (59.09%), and the most commonly affected age group was 20 to 60 years (86.36%). Knowledge of fatal adverse conditions in the temporal association of vaccination will help to tackle these situations well and improve the safety of vaccination drive further.

3D Printing Technology as a Promising Tool to Design Nanomedicine-Based Solid Dosage Forms: Contemporary Research and Future Scope.

3D printing technology in medicine is gaining great attention from researchers since the FDA approved the first 3D-printed tablet (Spritam®) on the market. This technique permits the fabrication of various types of dosage forms with different geometries and designs. Its feasibility in the design of different types of pharmaceutical dosage forms is very promising for making quick prototypes because it is flexible and does not require expensive equipment or molds. However, the development of multi-functional drug delivery systems, specifically as solid dosage forms loaded with nanopharmaceuticals, has received attention in recent years, although it is challenging for formulators to convert them into a successful solid dosage form. The combination of nanotechnology with the 3D printing technique in the field of medicine has provided a platform to overcome the challenges associated with the fabrication of nanomedicine-based solid dosage forms. Therefore, the major focus of the present manuscript is to review the recent research developments that involved the formulation design of nanomedicine-based solid dosage forms utilizing 3D printing technology. Utilization of 3D printing techniques in the field of nanopharmaceuticals achieved the successful transformation of liquid polymeric nanocapsules and liquid self-nanoemulsifying drug delivery systems (SNEDDS) to solid dosage forms such as tablets and suppositories easily with customized doses as per the needs of the individual patient (personalized medicine). Furthermore, the present review also highlights the utility of extrusion-based 3D printing techniques (Pressure-Assisted Microsyringe-PAM; Fused Deposition Modeling-FDM) to produce tablets and suppositories containing polymeric nanocapsule systems and SNEDDS for oral and rectal administration. The manuscript critically analyzes contemporary research related to the impact of various process parameters on the performance of 3D-printed solid dosage forms.

ß-Caryophyllene-Loaded Microemulsion-Based Topical Hydrogel: A Promising Carrier to Enhance the Analgesic and Anti-Inflammatory Outcomes.

Musculoskeletal pain and inflammation can vary from localised pain like pain in the shoulders and neck to widespread pain like fibromyalgia, and as per estimates, around 90% of humans have experienced such pain. Oral non-steroidal anti-inflammatory drugs (NSAIDs) are frequently prescribed for such conditions but are associated with concerns like gastric irritation and bleeding. In the present study, a microemulsion-based gel comprising ß-caryophyllene, isopropyl myristate, Tween 80, and normal saline was prepared as a topical option for managing topical pain and inflammation. The globules of the microemulsion were below 100 nm with a zetapotential of around -10 mV. The drug entrapment was >87% with a drug loading of >23%. The permeation studies established better skin permeation (20.11 ± 0.96 µg cm-2 h-1) and retention of the drug (4.96 ± 0.02%) from the developed system vis-à-vis the conventional product (9.73 ± 0.35 µg cm-2 h-1; 1.03 ± 0.01%). The dermatokinetic studies established the better pharmacokinetic profile of the bioactive in the epidermis and dermis layers of the skin. The anti-inflammatory potential in carrageenan-induced rat paw oedema was more pronounced than the conventional product (~91% vis-à-vis ~77%), indicating a better pharmacodynamic outcome from the developed system. The nanotechnology-based natural bioactive product with improved efficacy and drug loading can provide a better alternative for the management of musculoskeletal pain.

Current and Future Prospective of Injectable Hydrogels-Design Challenges and Limitations.

Injectable hydrogels (IHs) are smart biomaterials and are the most widely investigated and versatile technologies, which can be either implanted or inserted into living bodies with minimal invasion. Their unique features, tunable structure and stimuli-responsive biodegradation properties make these IHs promising in many biomedical applications, including tissue engineering, regenerative medicines, implants, drug/protein/gene delivery, cancer treatment, aesthetic corrections and spinal fusions. In this review, we comprehensively analyze the current development of several important types of IHs, including all those that have received FDA approval, are under clinical trials or are available commercially on the market. We also analyze the structural chemistry, synthesis, bonding, chemical/physical crosslinking and responsive release in association with current prospective research. Finally, we also review IHs' associated future prospects, hurdles, limitations and challenges in their development, fabrication, synthesis, in situ applications and regulatory affairs.

Molecular Mechanisms and Therapeutic Strategies for Levodopa-Induced Dyskinesia in Parkinson's Disease: A Perspective Through Preclinical and Clinical Evidence.

Parkinson's disease (PD) is the second leading neurodegenerative disease that is characterized by severe locomotor abnormalities. Levodopa (L-DOPA) treatment has been considered a mainstay for the management of PD; however, its prolonged treatment is often associated with abnormal involuntary movements and results in L-DOPA-induced dyskinesia (LID). Although LID is encountered after chronic administration of L-DOPA, the appearance of dyskinesia after weeks or months of the L-DOPA treatment has complicated our understanding of its pathogenesis. Pathophysiology of LID is mainly associated with alteration of direct and indirect pathways of the cortico-basal ganglia-thalamic loop, which regulates normal fine motor movements. Hypersensitivity of dopamine receptors has been involved in the development of LID; moreover, these symptoms are worsened by concurrent non-dopaminergic innervations including glutamatergic, serotonergic, and peptidergic neurotransmission. The present study is focused on discussing the recent updates in molecular mechanisms and therapeutic approaches for the effective management of LID in PD patients.

A Novel Approach of Targeting Linezolid Nanoemulsion for the Management of Lymph Node Tuberculosis.

Tuberculosis (TB) represents a major public health problem, globally affecting children and adults. Lymphatic TB is the most common type of extrapulmonary tuberculosis, which affects the peripheral lymph nodes. This burgeoning disease requires a long-term treatment of multiple antibiotics to kill Mycobacterium tuberculosis, resulting in an increased rate of multidrug-resistant tuberculosis. To overcome drug resistance with the first-line antibiotics, linezolid W/O nanoemulsion was developed in this current work. W/O nanoemulsion was prepared by oil phase titration technique using sunflower oil, span 80 and tween 80, and optimized by pseudophase ternary diagrams. The particle size, polydispersity index, zeta potential, viscosity, and refractive index for the optimized formulation were found to be 92.32 nm, 0.066, -21.9 mV, 32.623 cP, and 1.453, respectively. Drug release from the developed nanoemulsion followed the zero-order kinetic. The antimicrobial efficacy study confirms the antibacterial potential of the developed nanoemulsion. In vivo studies conducted on Wistar rats confirms the lymphatic targeting with a high amount of drug at the target organ just after 8 h of dosing. As a result of the foregoing promising results, it may be inferred that the suggested nanoemulsion could be a viable therapy option for lymph node tuberculosis.

Emerging advances in nanomedicine for breast cancer immunotherapy: opportunities and challenges.

Breast cancer is one of the most common causes of cancer-related morbidity and mortality in women worldwide. Early diagnosis and an appropriate therapeutic approach for all cancers are climacterics for a favorable prognosis. Targeting the immune system in breast cancer is already a clinical reality with notable successes, specifically with checkpoint blockade antibodies and chimeric antigen receptor T-cell therapy. However, there have been inevitable setbacks in the clinical application of cancer immunotherapy, including inadequate immune responses due to insufficient delivery of immunostimulants to immune cells and uncontrolled immune system modulation. Rapid advancements and new evidence have suggested that nanomedicine-based immunotherapy may be a viable option for treating breast cancer.

Cancer that begins in the breast is referred to as breast cancer. It may originate in either one or both breasts. It is one of the main causes of cancer-related death among women worldwide. Cancer immunotherapy is a game-changing treatment that improves the ability of the host defense system to spot and eliminate cancer cells with pinpoint accuracy. Cancer immunotherapy, also referred to as immuno-oncology, is a type of treatment option for breast cancer that uses the body's natural defense system to prevent, regulate and eliminate breast cancer. Immunotherapy is used to enhance or alter the functioning of the immune system so that it can locate and destroy cancer cells. Knowing how immunotherapy works and what to anticipate can often offer peace of mind to the patient who can then make informed decisions about care, especially if immunotherapy is part of the treatment plan for a particular patient.

Self-nanoemulsifying composition containing curcumin, quercetin, Ganoderma lucidum extract powder and probiotics for effective treatment of type 2 diabetes mellitus in streptozotocin induced rats.

Liquid self-nanoemulsifying drug delivery system (L-SNEDDS) of curcumin and quercetin were prepared by dissolving them in isotropic mixture of Labrafil M1944CS®, Capmul MCM®, Tween-80® and Transcutol P®. The prepared L-SNEDDS were solidified using Ganoderma lucidum extract, probiotics and Aerosil-200® using spray drying. These were further converted into pellets using extrusion-spheronization. The mean droplet size and zeta potential of L-SNEDDS were found to be 63.46 ± 2.12 nm and - 14.8 ± 3.11 mV while for solid SNEDDS pellets, these were 72.46 ± 2.16 nm and -38.7 ± 1.34 mV, respectively. The dissolution rate for curcumin and quercetin each was enhanced by 4.5 folds while permeability was enhanced by 5.28 folds (curcumin) and 3.35 folds (quercetin) when loaded into SNEDDS pellets. The Cmax for curcumin and quercetin containing SNEDDS pellets was found 532.34 ± 5.64 ng/mL and 4280 ± 65.67 ng/mL, respectively. This was 17.55 and 3.48 folds higher as compared to their naïve forms. About 50.23- and 5.57-folds increase in bioavailability was observed for curcumin and quercetin respectively, upon loading into SNEDDS pellets. SNEDDS pellets were found stable at accelerated storage conditions. The developed formulation was able to normalize the levels of blood glucose, lipids, antioxidant biomarkers, and tissue architecture of pancreas and liver in streptozotocin induced diabetic rats as compared to their naïve forms.

Treatment Options Available for COVID-19 and an Analysis on Possible Role of Combination of rhACE2, Angiotensin (1-7) and Angiotensin (1-9) as Effective Therapeutic Measure.

Corona virus disease (COVID-19), caused by SARS-CoV-2, is rapidly spreading all around the world and is posing a threat to mankind. Since SARS-CoV-2 is a novel virus, little is known about it and no effective drug is available for its treatment. While many drugs are being evaluated, an effective therapeutic measure is still lacking. SARS-CoV-2 like SARS-CoV binds with angiotensin-converting enzyme 2 (ACE2) present on human cells. SARS-CoV has been found to downregulate ACE2 and SARS- CoV-2 infection has been found to be associated with increased level of Angiotensin II. Based on these facts, we presume that SARS-CoV-2 like SARS-CoV downregulates ACE2, and in absence/reduced activity of ACE2, level of angiotensin (1-7) and angiotensin (1-9) is decreased while that of angiotensin II is increased and increased level of angiotensin II has been found to correlate with lung injury and viral load. We presume that restoration of normal functioning of renin-angiotensin system with recombinant human angiotensin-converting enzyme 2 (rhACE2), angiotensin (1-7) and angiotensin (1-9) may be an effective therapeutic measure but studies will be required to test this hypothesis and explore its possible role in treatment of COVID-19.

Solid self-nanoemulsifying delivery systems as a platform technology for formulation of poorly soluble drugs.

New drug discovery programs produce molecules with poor physico-chemical properties, making delivery of these molecules at the right proportion into the body a big challenge to the formulation scientist. The various options available to overcome the hurdle include solvent precipitation, micronisation/nanonization using high-pressure homogenization or jet milling, salt formation, use of microspheres, solid dispersions, cogrinding, complexation, and many others. Self-nanoemulsifying systems (SNES) form one of the most popular and commercially viable approaches for delivery of poorly soluble drugs exhibiting dissolution rate limited absorption, especially those belonging to the Biopharmaceutics Classification System II/IV. SNES are essentially an isotropic blend of oils, surfactants, and/or cosolvents that emulsify spontaneously to produce oil in water nanoemulsion when introduced into aqueous phase under gentle agitation. Conventional SNES consist of liquid forms filled in hard or soft gelatin capsules, which are least preferred due to leaching and leakage phenomenon, interaction with capsule shell components, handling difficulties, machinability, and stability problems. Solidification of these liquid systems to yield solid self-nanoemulsifying systems (SSNES) offer a possible solution to the mentioned complications, and that is why these systems have attracted wide attention. Other than the advantages and wide application of SSNEDS, the present paper focuses on formulation considerations, selection, and function of solidifying excipients; techniques of preparation; and case studies of drugs selected from different therapeutic categories. Developments in the techniques for in vitro evaluation of SSNEDS have also been discussed.

3D Printing Technology in Customized Drug Delivery System: Current State of the Art, Prospective and the Challenges.

BACKGROUND: 3D printing/Additive Manufacturing seems a pragmatic approach to realize the quest for a truly customized and personalized drug delivery. 3DP technology, with innovations in pharmaceutical development and an interdisciplinary approach to finding newer Drug Delivery Systems can usher a new era of treatments to various diseases. The true potential of this is yet to be realized, and the US-FDA is focusing on the regulatory science of 3D printed medical devices to help patients access this technology safely and effectively. The approval of the first 3D printed prescription medicine by FDA is a promising step in the translation of more research in this area. METHODS: A web-search on PubMed, ScienceDirect, and Nature was performed with the keywords Customized 3D printing and Drug delivery, publications dealing with the aspects of drug delivery using 3D printing for personalized or customized delivery were further considered and analyzed and discussed. RESULTS: We present the advantages offered by 3DP over conventional methods of formulation development and discuss the current state of 3DP in pharmaceutics and how it can be used to develop a truly customized drug delivery system, various 3DP technologies including Stereolithography (SLA), Selective Laser Sintering (SLS), Fused Deposition Modelling (FDM), Pressure Assisted Microsyringe (PAM) that have been used to develop pharmaceutical products have been discussed along with their limitations and also the regulatory considerations to help formulation scientists envisaging research in this area with the necessary information. CONCLUSION: 3D printing has the potential to fabricate a customized drug delivery system. Presence of many drug formulation and the devices are already in the regulatory approval process indicating its success.

Nanosizing of valsartan by high pressure homogenization to produce dissolution enhanced nanosuspension: pharmacokinetics and pharmacodyanamic study.

PURPOSE: The purpose of the present study was to formulate and evaluate nanosuspension of Valsartan (VAL), a poorly water soluble and low bioavailable drug (solubility of 0.18 mg mL(-1); 23% of oral bioavailability) with the aim of improving the aqueous solubility thus the bioavailability and consequently better anti-hypertensive activity. METHODS: Valsartan nanosuspension (VAL-NS) was prepared using high-pressure homogenization followed by lyophilisation. The screening of homogenization factors influencing nanosuspension was done by 3-factorial, 3-level Box-Behnken statistical design. Model suggested the influential role of homogenization pressure and cycles on drug nanosizing. The optimized formulation containing Poloxamer(-1)88 (PXM 188) was homogenized for 2 cycles at 500 and 1000 bar, followed by 5 cycles at 1500 bars. RESULTS: The size analysis and transmission electron microscopy showed nanometric size range and uniform shape of the nanosuspension. The in vitro dissolution showed an enhanced release of VAL from nanosuspension (VAL-NS) compared to physical mixture with PXM 188. Pharmacodynamic results showed that, oral administration of VAL-NS significantly lowered (p ≤ 0.001) blood pressure in comparison to non-homogenized VAL (VAL-Susp) in Wistar rat. The level of VAL in rat plasma treated with VAL-NS showed significant difference (p ≤ 0.005) in Cmax (1627.47 ± 112.05 ng mL(-1)), Tmax (2.00 h) and AUC0→24 (13279.2 ± 589.426 ng h mL(-1)) compared to VAL-Susp that was found to be 1384.73 ± 98.76 ng mL(-1), 3.00 h and 9416.24 ± 218.48 ng h mL(-1) respectively. The lower Tmax value, proved the enhanced dissolution rate of VAL. CONCLUSION: The overall results proved that newly developed VAL-NS increased the plasma bioavailability and pharmacodyanamic potential over the reference formulation containing crude VAL.

Brain targeting by intranasal drug delivery (INDD): a combined effect of trans-neural and para-neuronal pathway.

The effectiveness of intranasal drug delivery for brain targeting has emerged as a hope of remedy for various CNS disorders. The nose to brain absorption of therapeutic molecules claims two effective pathways, which include trans-neuronal for immediate action and para-neuronal for delayed action. To evaluate the contribution of both the pathways in absorption of therapeutic molecules and nanocarriers, lidocaine, a nerve-blocking agent, was used to impair the action potential of olfactory nerve. An anti-Parkinson drug ropinirole was covalently complexes with (99m)Tc in presence of SnCl2 using in-house developed reduction technology. The radiolabeled formulations were administered intranasally in lidocaine challenged rabbit and rat. The qualitative and quantitative outcomes of neural and non-neural pathways were estimated using gamma scintigraphy and UHPLC-MS/MS, respectively. The results showed a significant (p ≤ 0.005) increase in radioactivity counts and drug concentration in the brain of rabbit and rat compared to the animal groups challenged with lidocaine. This concludes the significant contribution (p ≤ 0.005) of trans-neuronal and para-neuronal pathway in nose to brain drug delivery. Therefore, results proved that it is an art of a formulator scientist to make the drug carriers to exploit the choice of absorption pathway for their instant and extent of action.

Nano-ropinirole for the management of Parkinsonism: blood-brain pharmacokinetics and carrier localization.

AIM: The aim of this study was to investigate the brain targeting potential of chitosan-coated oil in water nanoemulsions (CSNE(ROP)) delivered intranasally in haloperidol-induced Parkinson's disease rat models. METHODS: Chitosan-coated nanoemulsion (CSNE(ROP)) was developed through aqueous titration followed by a high pressure homogenization method. RESULTS: Gamma-scintigraphy study showed a significantly high mucoadhesive potential of CSNE(ROP) and least for conventional and homogenized formulations. Confocal study showed deep localization of formulations in the brain confirming the permeation potential of CSNE(ROP). Pharmacokinetic results of CSNE(ROP) in Wistar rat brain and plasma showed a significantly high (p** < 0.005) AUC0→24 and amplified Cmax over i.v treatment group. Neurobehavioral activity (rotarod and swim tests) and biochemical parameters (glutathion, TBARS and SOD) corroborated well with the pharmacokinetic results. The order of dopamine recovery in haloperidol-induced Wistar rats was found to be (i.n)CSNEROP group>(i.n)SolnROP group>(i.v)SolnROP group>haloperidol group. CONCLUSIONS: Finally, the investigation demonstrated that intranasal delivery of mucoadhesive nanocarrier might play as a potential candidate in the management of Parkinson's disease and related brain disorders.

UHPLC/ESI-Q-TOF-MS method for the measurement of dopamine in rodent striatal tissue: a comparative effects of intranasal administration of ropinirole solution over nanoemulsion.

An ultra high performance liquid chromatography-electrospray ionization-tandem mass spectrometric method (UHPLC/ESI-Q-TOF-MS) for the analysis of dopamine (DA) in Wistar rat brain homogenate has been developed and validated. The chromatographic separation was achieved on a Waters ACQUITY UPLC™ BEH C18 (100.0 mm × 2.1 mm; 1.7 µm) column using isocratic mobile phase, consisting of acetonitrile and Formic acid (0.1% w/v) (10: 90; v/v), at a flow rate of 0.15 ml min(-1) . The transitions occurred at m/z 154.04 → 137.006 for DA, and m/z 184.204 → 166.08 for the internal standard. The recovery of the analytes from Wistar rat brain homogenate was optimized using liquid-liquid extraction technique (LLE) in ethyl acetate. The total run time was 3.5 min and the elution of DA occurred at 1.44 ± 0.05 min. The linear dynamic range was established over the concentration range 75-750 ng mL(-1) (r(2) ; 0.9921 ± 0.0005) for DA. The intra-assay and inter-assay accuracy in terms of % CV was in the range 0.73-2.80. The lower limit of detection (LOD) and quantitation (LOQ) for DA was 0.278 and 0.844 ng mL(-1) , respectively. Analytes were stable under various conditions (in autosampler, during freeze-thaw, at room temperature, and under deep-freeze conditions). The developed method was successfully applied for in vivo profiling in rodents.